Where data come from in storage location automatically?

Hi!
In SPRO, if I select  the storage location automatically option (in movement type and in plant), when the systems creates the data automatically, where the data comes from?
Thanks in advance.

in the moment when you perform the first movement to this storage location, then SAP will extend the material master. Most fields in the material master storage location view are not storage location specifc, the are kept at client or plant level. Only a few fields are storage location specific. you either have to complete those fields later manually or you must not activate auto storage location creation .

Similar Messages

  • Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?

    Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?

    iPad requires Wifi (or 3G /LTE) to connect to the Internet. You cannot connect a USB modem to the iPad.
    You can create your own WiFi hotspot through your computer for your iPad to connect to, if your computer supports this functionality. All Wifi Macs and many Wifi PCs do. Check your computer manual for how to do it.

  • Where is the data come from when BW extract data from APO's MSP

    Hi,all.
       The APO system has many datasource,I have activated all the datasource with TCODE RSA5.
      I want to extract APO data to BW(Not APO's),where the APO data come from for BW extract,APO BW or SAP transparent table of APO or APO liveCache?
      PLZ help me,thank you very much.

    Hi,
    APO to BI Data Flow :
    1. Normally APO  DS  naming convention start with "9".
    2. Normally Planning area will provide the data for the DS.
    3. Using one T-Code ( /N/SAP/ ..... Ask APO Person) DS will be generated .In the specified T-Code you will provide the relavant 
        Planning area and DS will be generated.
    4.As you know RSA3 is for checing the data for DS.If you found there is no data for some fields then you will check the data at the planning area level (In R/3 table level).
    Regards
    Ram.

  • Where the data comes from?

    Hi experts
    Suppose we have some tcodes in R/3 eg mb51..
    In which we can select say some material & can find some information related to that material..
    Where does the data come from? How can we find that from which tables data is getting populated in these transactions??
    Kindly help..
    Regards
    Swati

    Hi Swati.....
    I will take ur exemple.........Look in MB51........there are several fields.........Actually it is a standard MM report.......For this some ABAP program is running in the background......Now it doest'nt mean that all the fields are getting populated from the same table.........may be that this program is joining different table on the basis of some common fields and fetching the data........and aone field may exist it more than one table....
    You can check that each field belongs to which table.............To do this press F1 on each field.........
    Suppose on the Material field u press F1....There is an icon Technical Information.....(It looks like a hammer.....;) ).........click on it.........from there .......if u are very lucky.then u will get the table name directly........like in case og Matarial........in the Transparent tabl field .........the table name MSEG is already given.........sometimes you will find that the table name which is given here is a structure.........and structure does'nt holds any data..........it gets data from some table........So in that case you have to copy the field name >> Go to SE11 >> in the Data type field..........give the field name and click on the Where-Used List on the top..........Select Table fields..and execute.........you will find all the related tables.......which contain this field...........
    Now U may be more unlucky.......it may happen someone has created a customized field using the Data Element.......In this case Copy the Data element.....Go to SE11 >> put it in the Data type field and click on the Where-Used List on the top..........Select Table fields..and execute.........you will find all the related tables.......which contain this field which is bulid of this data element................
    Hope this helps....
    Regards,
    Debjani......
    Sometimes it may happen that is a Structure field only...........

  • Where does the data come from which powers the ship date and delivery date

    Hi All,
    Please let me know, where does the data come from which powers the ship date and delivery date?.
    Adi.

    Hi,
    DELIVERY DATE  will be maintain in the SALES DOCUMENT TYPES in VOV8 in the tab REQUESTED DELIVERY DATE/PRICING DAE/PURCHASE ORDER DATE.
    The field is PROPOSE DELIVERY DATE .
    If you check the field then the document created date will be the Requested date and will be carried from ORDER TO DELIVERY.
    If you want the delivery date other thann the CURRENT date then you have to maintain the LEAD TIME in days in the same tab.
    SHIP DATE: is the date on which you do the PGI in the delivery .
    Please check them and revert back if u need further details
    thanks,
    santosh

  • How to block movement type 261 and 262 from several storage locations

    Dear Expert,
    Can we block the  261 and 262 movement type from several storage locations? These storage locations are not affected by the MRP run, where for the materials that have been moved to these storage locations their existance are not count. These storage locations could not be used for confirmation production order, therefore i want to block  261 and 262 movement type from these storage locations.
    Thanks
    Pauline

    Dear Pauline,
    if my understanding is correct abt ur query,
    1) you want in confirmation screen, Consumption should happen only from one storage location
    2) Rest all storage locations should not be allowed
    3) Maintain Storage location in BOM component view, in mass you can maintain in CEWB
    4) Now GO with SHD0, Make storage location field as Out put only, for CO11N Transaction
    Plz refer this link for SHD0 Demo
    [https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/transactionVariant-AStepbyStepGuidefor+Creation]
    Regards
    Madhu Kumar

  • Create storage location automatically for movement type 261

    Hi Experts,
    Currently we're inprocess of implementing "create storage location automatically" for reservation, and I've done with the configuration for both reservation side (Define Default Values) and movement type side (GI/transfer posting - Create Storage Location Automatically).
    For movement type 201, new storage location successfully extended/created using T-Code MB21 (Create Reservation). But we found an error message while conducting the same thing for movement type 261 (which only can be created using T-Code IW31 (Create material reservation form Work Order).
    Did we missed any required configuration? Pls kindly advice on what we should do.
    Thanks a lot. Really appreciate the prompt response.
    Rgds,
    MD

    Here's the current situation,
    We configured the plant/storage view (SPRO), most of materials already extended to desired plant and storage location. Commonly, we can extend or create any materials for certain plant and/or storage location by maitain material master data (using T-Code MM01).
    Recently, we develop the additional configuration to activate "automatic create storage location" for reservation, aligning with the movement type for Goods Issue (201,221,261,301,etc).
    Let's say we have material number 123456789 and currently assigned to plant YYYY, but not extended to storage location XXXX. By performing T-Code MB21 (create reservation) with movement type 201 inputted, the respective material (123456789) is automatically created for the XXXX storage location.
    But the above condition is not effected while performing the same thing using T-Code IW31 (create material reservation via Work Order) with movement type 261 (GI for Order).
    Any idea to perform create storage location automatically while creating reservation for movement type 261? is there any possible configuration or procedure to be added?
    Thank you

  • Function of create Storage Location Automatically

    Whats the function of the following Tab in SPRO.
    SPRO- Materials management - Inventory management and Physical Inventory - Goods issue/Transfer Posting - Create Storage Location Automatically
    Please advise

    Hi,
    This is the case for, if you work with negative stocks and a material's first movement may be an outward movement that is Goods issue or Transfer posting.
    If the material master record is not extended to the storage location which is giving at the time of goods issue / transpfer posting, system won't allow to post the document. First you have to maintain material master record for that SL, then only system will allow postings.
    In such cases  if the  material master record is not created for the storagelocation, SAP having facility like that system can update / create SL data for that materila master record automatically by the system during GI / TP postings.
    For that you have to activate SL Create automatically checkbox aganist Plant as well as Movement type. You have activate in both the settings, then only system will update/create SL data in the MMR.
    If the Negative postings allowed means eventhough stock is not there, system will allow to issue stock and inventory will show with negative sign.
    For ex: Stock is zero. You have issue 25 with the movement type 201, system will allow to issue the stock. But inventory will show -25 for that material (Check in MMBE).
    This is case for, if you work with negative stocks and a material's first movement may be an outward movement that is Goods issue or Transfer posting. Then only these setting will helpful.
    Regards
    KRK

  • Confirmation of service in the document flow, where it comes from?

    Dear all,
    I found a confirmation of service after I picking and posting goods issue, from the document flow.
    I just wondering, where it comes from? Or, how can I configure it on or off for display?
    (This is a standard ERP system, should not involve in the CRM module)
    Thanks,
    Edited by: Peng Li on Apr 29, 2008 10:04 AM
    Edited by: Peng Li on Apr 29, 2008 10:38 AM

    Hi Peng,
    This usually happens for inbound deliveries usually happens when a movement type is not found for the relevant item. Please check in the delivery item if a movement type is maintained.
    Another possibility is that the material is a non-stock (service) material type for which goods movement are not relevant. Check the material type from the material master.
    Regards
    Nikhilesh

  • Transfer material from one storage location to another storage location

    Is there any bapi  to transfer material from one storage location to another storage location

    Hi,
    You need to use the below BAPI
    BAPI_GOODSMVT_CREATE
    Regards
    Sudheer

  • How to extend material in storage location automatically???

    Dear Gurus,
    We have 9 plants in this company.
    Every time we create a material we have to extend it in all plants.
    Because it takes to long to do this one by one with MM01 we use mm17 and we created there a variant that extends the materials in all plants automatically.
    Then we have 3 storage locations for each plant. we use MMSC: enter storage locations collectively, to extend each the material in all the storage locations of the company 9x3 = 27. This takes too long as a procedure.
    Is there a way to automate this procedure, via rutines, codes, variants, ABAP etc??? and how should I do that??
    Thank you in advance

    Dear Friend,
    In customization spro>>MM>>inventory management>>Plant parameters>>select your plant >>click on create storage location automatically
    click that one, if your not extended the material to the particular storage location and doing the goods receipt to the particular storage location  system  will allow you to do that
    Regards
    Pramod

  • One SO but I would like Post Goods Issue from different Storage Locations?

    Dear All,
    Pls help me solve this issue below:
    I have one SO, Item xzy, Qty = 300 but I would like to Post Goods Issue from different Storage Locations (Qty = 100 for each locations)
    E.g I have 3 storage locations: A, B, C and need to assign Post Goods Issue authorizations to 3 users U1, U2, U3:
    - U1 can Post Goods Issue from storage location A only (but cannot from B, C)
    - U2 can Post Goods Issue from storage location B only (but cannot from A, C)
    - U3 can Post Goods Issue from storage location C only (but cannot from A, B)
    How can I assign the Authorization for users?
    How can I create Outbound Delivery:
    a. 1 SO --> 1 outbound delivery --> Post GI 3 times
    b. 1 SO --> 3 outbound delivery --> Post GI
    Thank you very much for your support
    Cao Huy.

    Hi Senthils,
    Pls see my comment below:
    For Authorization check for storage Location
    1. GO to the following Menu path
    Spro>Material Management> Inventory manangement and Physical Inventory>Authorization Management>Authorization check for Storage Location.
    Here you have activate authorization tick for storage location and plant combination.
    --> Done
    2. Set authorization for Authorization object MM_MSEG_LGO thro Basis for the combination of movement type and storage location
    for each user.
    --> Done
    There are 3 storage locations(A,B,C) in one outbound delivery, and when user 01 tries to Post GI this outbound, it means that the system will Post GI for all line items in this outbound, but user 01 has not authorization for location B, C.
    How can user 01 Post GI from only location A in this outbound???
    And then user 02 will Post GI from only location B in this outbound,
    user 03 will Post GI from only location C in this outbound.
    Thanks
    Cao Huy

  • Value Set whose Data come from customize table with distinct record

    Dear All,
    I am new in Oracle EBS, currently i am creating value set whose data come from customize table which have 40 duplicate record in which distinct column return 27 record .
    Table XX_ROUND_SET
    Columns (Transactions_id,set_record)
    Total Record (40)
    Distinct Record (Set_Record --> 27)
    I just want to show only 27 record in it.
    Thanks
    Rehan

    Hi Rehan,
    PL.IGNORE MY EARLIER UPDATE AND TREAT THIS UPDATE AS YOUR SOLUTION.
    Method 1
    Create the VIEW based on DISTINCT values; use the VIEW for creates the VALUESET.
    Method 2
    Paste the QUERY in TABLE field with alias name, and give the column name (with alias name).
    (in your case )
    TABLE NAME : ( select distinct transactions_id, set_record from XX_ROUND_SET ) Y
    VALUE : Y.transactions_id
    HTH
    Sanjay

  • I have an icon thats appeared in finder ..i don't know where its come from and what its for. It doesn't  respond in any way when I click it.How do I get rid  of it?

    I have an icon thats appeared in finder ..i don't know where its come from and what its for. It doesn't  respond in any way when I click it.How do I get rid  of it?

    I can't select it .. I click on it and nothing happens. The only thing I seem to be able to do is a two fingered click which brings up a context menu for the side bar preferences..but unfortunately this icon does not appear in the list.

  • I have a green vertical line in my bb 9300 what ca I do!!! I don know where it come from..

    I have a green vertical line I don't know where it come from
    Solved!
    Go to Solution.

    Ummm...what?
    You "do that last time"? Does that mean you already had tried this before posting? If so, I fear you may have tried other things as well...in which case, I request that you list out EVERYTHING you have already tried along with the specific results of each attempt.
    Further -- "nothing happen"...as in, your BB did not reboot? Or do you mean that the reboot completed fine, but nothing changed regarding the symptoms you reported.
    Please be very careful and explicit as the only information we have is what you say here...assumptions and guesses on our part are made much more difficult when there is little information provided.
    Thanks and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • Print button on playbar

    I noticed a Print button on a playbar on a demo about aggregator (on Adobe's site).  How can i get a print button like that?  Is that a widget that costs or is it available with version 6?  Thanks!

  • Hello Guys, I have a serious problem with Installation of OSX

    Hello , I am using LION OSX 10.7.3 . Day before Yesterday I lost all my contacts in the address book and iTunes window opens without my intervention. I called to the apple care and said the problem they simply said to reinstall the OS. I noted the de

  • Manual accrual net value equal to zero

    Hi SD gurus, i'm creating manual accrual SD document strating from rebate agreement. The value of the document created is equal to zero and i found no way to correct this; the strange is that i'm able to invoice the document and to post it in FI and

  • Mac Compatible Scanners

    Does anyone have a recommendation on a document scanner that is compatible with mac os X with twain drivers? I will be using it for document OCR with Adobe acrobat 8.0, but many of the scanners don't support twain so you have to scan the page, then m

  • NAC Guest Server SMTP Authentication

    Does anyone know if you are able to set your SMTP server in the NAC Guest Server to do SMTP Authentication? Our old Exchange server just let us specify the SMTP server and send the guest accounts their Username and Password to their outside accounts.