Where did 8 bit / 16 bit / 32 bit go?

Hey, I've been off the Motion grid for a while. There used to be a place to set your project to 8 bit, 16 bit, or 32 bit float color. I'm in Motion 5 and I can't find that anywhere. Is that gone?
I'm using a cloud generator as a background in a project and I see banding in it even though I'm rendering it at ProRes 422 HQ (1080p 23.98fps).
Sorry for the stupid question. I looked in the manual and the message boards.
Thanks!
Scot

Motion 5 is 32-bit floating point at all times now.

Similar Messages

Disable 24-bit crystalizer... and where did the snap/crackle/pop

For the longest time, I thought the crackling and popping was because of the CMSS3D Headphone option being enabled, but just for kicks, I tried disabling the 24-bit crystalizer, and poof! Where did the snap/crackle/pop go? It seems to be gone! I can li've without the crystalizer, after all there is really no way to make something sound better than the source. This gives me hope that it is a driver issue after all. I have a Rev A fatalty.

It is still there... you cant just hear it as good anymore.. i never have crystalizer on, i still got my rice crispies. So good if you dont hear it anymore.. but i know this wont fix it for many of us. I can agree that if i have cmss3d enabled but have MacroFX and Elevation Filter off, the pops& crackles are lower in volume.

Can you email a link to me, where I can download the 64-bit version of firefox for my windows 7 64 bit laptop?

hello
I have windows 7 home premium 64-bit operating system.
i would like to download and install firefox 64-bit version.
can you email me a link where I can download the 64 bit firefox?

Link to 64 bit of Nightly http://nightly.mozilla.org/
edit: Fixed linked it was linking to the tinderbox hourly builds (multiple builds a day) which can be much more unstable if the build did not build properly (due to checkins and trying stuff) and yet may still be green and uploaded. Use the /firefox/nightly/latest-trunk/ not tinderbox if you must.
Also note the unstable Nightly builds get updates each day (sometimes a respin even) and are not meant for regular Firefox users in mind but devs and testers who at very least understand the basics of separate installs and separate Profiles for each.

Table name where I can see the Secondary bit map Index for Cube Loads in BI

Hello Friends I want to know the table name where I can see the Secondary bit map Index that gets created with each request that get loaded to Cube so each 1 request will be multiplied by 7 dimension and 7x1 = 7 local secondary bit map index will be created where is that table which show me that .
Under Oracle every uncompressed request corresponds to one partition in the
F facttable of the corresponding infocube. This partition also brings along
a full set of secondary local bitmap index partitions.
If you have a cube with 10 uncompressd requests and 10 dimensions (every
dimension brings with it a local bitmap index) you have 100 partitions for
the table itself and 10 x 10 index partitions which makes a total of
100 database objects. where is that table in BI WHICH STORE THIS INFORMATION
Also if I have E Table with no entries for future 2009 dentries will that be an issue with blank partition ion E Fact table if yes please suggest how to resolve this issue

Hi Soniya
Information about BI objects is stored in the RSD* tables. For example:
Infocubes: RSDCUBE / RSDCUBET
Aggregates: RSDDAGGR_V / RSDDAGGRT
You can see information on abap dictionary object as well in transactions SE11 / SE14. You will have to know the real table name of the cube, should be something like /BIC/F* for the uncompressed and /BIC/E* for the compressed table.
Best regards, Michael

Where can i download official 64 bit version even if it is beta etc

Where can i download official 64 bit version even if it is beta etc
I am using win 8.1 64 bit
and i can say that every application i develop as 64 bit on c# works better on this os
so i want to try out 64 bit firefox as well

The earliest Mozilla will have a Win64 version of Firefox is Firefox 37.0 in first phase. https://wiki.mozilla.org/Firefox/win64
You can technically build Win64 Firefox now or use the so call third-party builds but that does not mean they are stable though it may seem like it.

Where can I download a 64-bit version of the Firefox 4 software?

I downloaded Firefox 4 setup by using the Firefox 3.6.x Update feature and saved it as a file. I was not offered any choice as to whether to install a 64-bit or a 32-bit executable. It also did not tell me whether the program that would be installed is 64-bit or 32-bit.
When I run the downloaded file, I select the custom configuration of the cook-book vanilla installation routine.
The default installation location is C:\Program Files (x86)\Firefox -- which is the Windows 7 directory for 32-bit executables.
So, it would appear that Firefox 4 is 32-bit software, at least the one that I downloaded. I cannot find a download location on the Mozilla.com web site which is identifed as for getting 64-bit software instead of 32-bit.
From which web site and page (URL please!) can I download a 64-bit version of Firefox 4?

There is no public release of Firefox 64 bit for Windows yet - only for Mac and Linux. I believe the trial versions haven't been stable.
I don't think we are missing much at this stage.

Where can I find Vista 64-Bit drivers for the Satellite A100-049?

I currently run Vista Home Premium SP1 32-Bit and do so because there appears to only be 32-Bit drivers on Tosiba's website:
[http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?macId=&mode=allMachines&userOS=& action=search&selCategory=2&selFamily=2&selSeries= 153&selProduct=700&selOS=2]
Where can I find Vista 64-Bit drivers for the Toshiba Satellite A100-049?
Thanks

Thanks for the reply.
That's rubbish. Vista 64-bit runs fine with 2Gb and my laptop supports up to 4Gb.
We'll never move on to 64-Bit if companies don't provide drivers.
I'll look at those sites. I've had trouble installing nVidia drivers from nVidia website.
I have to use the one provided by Toshiba.
Hopefully I won't find this when trying 64-Bit. My plan is to go 64-Bit with Windows 7 so no rush just yet.
As I understand it Vista drivers will work with Windows 7.
Thankfully when I reinstalled Vista 32-Bit not long ago using an OEM from Technet I only need 2-3 drivers from Toshiba website, most of it they give to download you don't need at all.
Thanks again.
p.s - They do offer 64-Bit drivers for my network card though.

Where can I find firefox 64-bit

Hi!
I installed ORACLE Entrprise Linux 4 u.7 64-bit. Where can I find firefox 64-bit? It is absent in the distribution.
...

Hi Herb,
For the record, we are talking about the Flash plugin from Adobe being an "alpha" release, not the Firefox browser.... (see: http://labs.adobe.com/technologies/flashplayer10/64bit.html)
It's "alpha", in that Adobe assumes no responsibility for supporting incompatibilities with the Flash spec., would be my guess. I've been using it since November, 2009 (and the latest refresh of the Alpha, early Feb., 2010) with good results. By "good", I mean, it hasn't crashed my browser, seems to perform moderately well on my laptop, and I can hit all the Flash sites like YouTube, ETrade, and things "just work". I've had much better luck with this alpha release of the plugin than I've had with the Linux open-source plugin, swfdec: http://swfdec.freedesktop.org/
If you read the Adobe FAQ (http://labs.adobe.com/technologies/flashplayer10/faq.html#flashplayer10FAQ_64-bit03) it appears Adobe plans to release the full version with their next major release cycle.
Hope that clarifies...
-- Steve

Where do I find the 64 bit Quick Time Installation?

Am trying to download itunes but need to download Quick Time for a 64 bit Windows 7 machine.
Can only find QT for 32 bit. Anyone know where I can find the 64 bit QT download?
Thanks-jsp

Hi,
Try here.
http://support.apple.com/kb/DL1037
Carolyn

Where can I get the 64-bit version of AMSCheck

Hello,
I'm using the Linux version of AMS 6.0.3 on a 64-bit machine. I'd like to use the AMSCheck tool but noticed
that unlike FLVCheck, the AMSCheck tool was delivered as a 32-bit executable (even thought I downloaded the
64-bit version of AMS):
/opt/adobe/ams/tools# file flvcheck
flvcheck: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.9, stripped
/opt/adobe/ams/tools# file amscheck
amscheck: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.9, stripped
This looks like an oversight.
Is there anywhere that I can obtain the 64-bit Linux version of AMSCheck?
Thanks in advance.

Hi Phil,
You have to install library packages in order to run 32 bit application on 64 bit OS, please check How to run 32 bit app on 64 bit OS link.
Let me know how it goes for you.
Regards,
Puspendra

Windows 7 64 bit, Access 2010 32 bit, Oracle 10G client 32 bit, Oracle database 10.2.0.4 64 bit

I am trying to connect to an Oracle 10.2.0.4 database from Windows 7 OS - 64 bit using
Access 2010 32 bit and Oracle 32 bit client version 10.2.0.1 installed on PC.
My user requires a 64 bit Windows 7 OS for other needs.
Oracle ODBC driver is 32 bit from Oracle 32 bit client.
In Windows 7 OS 64 bit, ODBC DSN setup software is located in:
C:\Windows\system32\odbcad32.exe for 64 bit drivers - all DSN types setup and
C:\Windows\syswow64\odbcad32.exe for 32 bit drivers - USER DSN setup
When I run the ODBC Data Source Administrator, I see the Version number is 6.1.7601.17632
I setup a User DSN using the 32 bit odbcad32.exe with a 32 bit ODBC driver.
Our Oracle TNSnames.ora file has our standard entries which have worked for years
(Windows 7 OS 32 bit and everything 32 bit has connected for years too)
So when I configure an ODBC User DSN and leave all the default settings and press the TEST Connection button, it says it works.
But when I open the existng Access 2010 database (which does connect to Oracle in a Windows 7 32 bit PC environment),
1. I go to Access External Data ribbon tab / Link to the Data Source by creating a linked table / press OK
2. I select the Machine Data source = to the USER DSN name / press OK
3. The Oracle ODBC Driver Connect Window opens with Service Name = USER DSN and User Name and it wants a Password
4. I enter the correct password and I get the following error message:
ODBC call failed
[Oracle][ODBC]{Ora]ORA-12154: TNS: could not resolve the connect identifier specified
(#12154) [Microsoft][ODBC Driver manager] Driver's SQLSetConnectAttr failed IM006 0
[Microsoft][ODBC Driver Manager] Driver's SQLSetConnectAttr failed (#0)
I have tried a quite a number of fixes:
I have gone into the PC registry and cleaned out most or all off the Oracle client keys and
reinstalled the Oracle 32 bit 10g client. It didn't fix the error.
I read about the Oracle instantclient-basic-win32-10.2.0.4.zip with ODBC modules but I have Windows 7 64 bit.
Anyone experienced a problem like this and have a fix?

Thank you for your reply.
I did not get to try it because after I entered my question, I did a lot more internet Googling.
I found this small comment:
“There's a known issue where you get a 12154 error message running 32 bit software on a 64 bit OS using client 10201, and
It should be resolved by patching the client to 10204, which you do by applying the 10204 database patch to it.”
I searched around for the 10.2.0.4 patch for 10.2.0.1 Oracle 32 bit client.
When I contacted my Oracle DBA to ask if he had that patch, he said that I should try the 11g 32 bit client on the Win 7 64 bit PC.
We have a 10.2.0.4 Oracle database but he said the 11g client should work fine.
I tried it and it solved the problem!
With so many settings, configurations and permissions involved in ODBC, I am inclined to think that I missed a setting but
it was a bug in the 32 bit client 10.2.0.1.
Solved.

How to change default HDR toning with 32 bit smart object - 16 bit, when not merging

Suppose I have just done this:
Opened a RAW file as a 16-bit smart object through camera raw, so I can easily go back and change raw parameters if needed
Converted the document to 32 bit mode
Set 32-bit preview mode to Highlight Compression
Added a Curves layer and fiddled with the sliders until satisfied
So far so good.
Now what I would like to do is envelope/convert these two layers into a smart object, and then change the mode to 16 bit with a Highlight compression method, but WITHOUT merging the smart object. Merging leaves me with one flattened non-smart layer. Obviously I don't want to merge, because all the smartness of the previous (32 bit) smart object, and I cannot go back to the equally smart raw file.
For a demonstration: http://tv.adobe.com/watch/russell-brown-at-photoshop-world-2011-orlando/smart-object-32-bi t-hdr-editing-techniques/
After chosing "merge layers", an impressive dialog box is displayed with 4 toning methods. When NOT merging, nothing is displayed, and Exposure/Gamma seems to be silently used. Fine in some cases, but not now. It seems one cannot change that, or choose another one of the 4 methods. But perhaps someone has figured out a way to "will" it in another direction?
Thanks for your help!

Yes sorry about that, I may have been a bit brief indeed:
I'm using Photoshop CS5, x64, latest patch (12.0.4). And ACR 6.4.1 to open a Raw file as a smart object in Photoshop.
Step 2: correct, I used Image->Mode->32bit
Step 3: I set the 32bit preview mode by clicking View->32-bit Preview Options->Highlight Compession
Setp 4: I'm mistaken here, I added a Levels layer, because Curves are indeed unavailable in 32 bit mode.
While I'm at it:
Step 5: Then, I would select these 2 layers in the layers pane and convert them to a smart object (right click in layers pane -> convert to smart object)
Step 6: Next step would be Image->Mode->16-bit. It would then ask to have the layers merged or not before changing bit depth. Only if you choose merge, the HDR toning dialog box would appear, from which you can select Exposure&Gamma, Highlight Compession, Local Adaptation and so on.
I don't want to merge, because it will destroy the smart object containing the Levels layer and the original raw file (in a smart object)
So I select "Don't merge". It doesn't show the HDR toning dialog, and goes straight in 16-bit mode. But what toning mode did it choose? By comparing the result you get when not merging, to the result when one does merge, it appears a default toning mode of Exposure&gamma is chosen. That's not what I want, because I would like to have Highlight Compression.
But where can I change this behaviour?

MySQL 5.0.77 (64 bit) and unixODBC 2.2.11 (32-bit) on Linux 64-bit

Hello All,
Is MySQL 5.0.77 (64 bit) compatible with unixODBC 2.2 (32-bit) on Linux 64-bit server ?
I am facing problem of inconsistent connection to MySQL through the unixODBC driver manager.
I am also using mysql-connector-odbc 3.51.27 which is also 32-bit....
Any help is appreciated...
Bhushan

<div class="DownloadDate">"Release date : 3 Jul 09<div class="DownloadShortDesc">This?download is a?driver providing Microsoft? Windows?7, Windows Vista? and Windows XP support for Creative Sound Blaster? Audigy? series of audio devices. For more details, read the rest of this web release note."?
Right where do I start...... I got the latest drivers installed, "What You Hear" was working for about oh four recordings then stopped and back to choppy recorded sound, I went through alll options and nada. So I downloaded Audacity to see if this was a problem with Wavelab and re-tried. Well same thing choppy sound and even rebooting did not help. So I will be taking EVERYTHING!!!!!! CREATIVE off my machine, if these idiots cannot be bothered to release drivers that work then I'm going elsewhere. My music creating will have to be put on hold, my 22m will still have to sit in it's box.
Creative you are all a bunch of ?$"?%$%" idiots period. You have ALWAYS (till now in my case anyway) had good drivers. Even though Windows 7 has been in RC for ages you (absolutely missed that boat, hell you didn't even get up to try to catch it) cannot be bothered to write drivers that work and your idiotic half cooked attempts at customer service to give your bread and butter (that's right your customers who keep you in business) solid drivers are an absolute joke. YOU CAN KISS MY SHINY METAL HINEY!!!!! (thanks Bender lol). I am going to my onboard drivers. Thanks Creative (the name "creative" is kind of contradiction in itself, you should look up the meaning of the word lol). Oh and I will be advising EVERYONe who thinks of upgrading to Windows7 to avoid Creative hardware.
:angry::angry::angry::angry::angry::angry::angry:: angry::angry::angry::angry::angry::angry::angry::a ngry::angry:
Question for forum users: what is the best way to get rid of every bit of drivers?

How to install 64-bit version on 64-bit OS

I am trying to install Labview 2011 SP1 Evaluation on Windows 7 64-bit OS. When I go to choose the isntallation directory it automaticaly points me to the 32-bit compaibility folder "Program Files (x86)". I believe this isntall the 32-bit version of Labview. I want to install the 64-bit version. How can I do this?
Solved!
Go to Solution.

hounddog wrote:
I had a 64 bit and a 32 bit version installed after the first version because there were some tools that I wanted to install that would not install on the 64 bit version. There seem to be 2 different program file directories now: Program Files and Program Files (x86) so I'm assuming that they are for the two different versions of LabVIEW. In the Program Files / National Instruments / LabVIEW 2011 directory there is a LabVIEW.exe file, but in the similar (x86) directory there is no LabVIEW.exe file. It seems like there is no 64 bit LabVIEW version still installed in this computer. When I downloaded the CAN device drivers and installed the package, the sub VIs did not show up in the tool bar when I ran LabVIEW. However, when I look in the (x86) version files I see the CAN folder installed in the 64 bit program files directory! Should I uninstall the current version and reinstall the 64 bit verson to fix this CAN problem, or is there another way to fix this
You got it mixed up here. Microsoft decided that Program Files is always meant to mean the native version, which means that for Windows 64 bit, any 64 Bit applications get installed there. Program Files (x86) is for 32 Bit applications that will run inside the Win32 subsystem in Win64. Most NI Toolkit and driver installers only install into 32 Bit. So if you use LabVIEW 64 Bit you will usually have to copy the files from the Program Files (x86) directory into the according Program Files directory, making sure you maintain the same hierarchy.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Migrating an SAP 4.7x110 system on W2003 32-bit to a 64-bit host (x86_64)

We want to migrate an SAP 4.7x110 system on Windows Server 2003 32-bit to a 64-bit host (x86_64). Afterwards we want to upgrade the system to ECC 6.0.
According to PAM, 4.7x110 is not supported on Windows 64-bit.
According to note 960769,
"After the migration to the 64-bit hardware, your SAP system may have a status that is not supported by SAP for productive use (see Note 814834). You may need to upgrade to a new SAP release. In this exceptional circumstance, SAP offers support for the duration of the upgrade. Note that SAP does not support a longer, more productive use of such a system for the period after the migration and before the upgrade....
...We generally recommend to use SQL Server 2005 (64-bit) for the productive use on x86_64. However, the 32-bit operation of SQL Server 2000 on Windows x86_64 64-Bit (supported by Microsoft) is also supported by SAP...
...The following table illustrates which OS/DB combination supports each SAP release in the target system.
Source System   Target System (Kernel, DB Software)     Support Comment
3.1I   3.1I 32-bit, MSSQL 2000 32-bit    only for upgrade (a,c)
4.0B   4.0B 32-bit, MSSQL 2000 32-bit    only for upgrade (c)
4.5B    4.5B 32-bit, MSSQL 2000 32-bit    only for upgrade (c)
4.6C   4.6D 32-bit, MSSQL 2005 64-bit     productive (b)
620   640 64-bit, MSSQL 2005 64-bit    productive (b)
640   640 64-bit, MSSQL 2005 64-bit    productive (b)
700   700 64-bit, MSSQL 2005 64-bit    productive (b) "
According to note 814834,
"SAP supports the x86_64 platform on Windows 2003 Server SP1 x64 for kernel 4.6D and kernel 6.40 and higher. ... For product versions based on kernel 6.40 and higher, only 64-bit operation is supported."
According to note 905634, about SQL Server 2005 support (where a mention to R3E 4.7 x110 is missing)
"Supported SAP products based on SAP_BASIS 6.20 and SAP_BASIS 6.40
Product Windows platforms
BW 3.10 x86, IA-64
SCM 4.0 x86, IA-64
EBP/CRM 4.0 x86, IA-64
ECC 5.0 SR1 x86, IA-64, x64
NetWeaver'04 SR1 x86, IA-64, x64
SCM 4.1 x86, IA-64, x64
SRM 4.0 SR1 x86, IA-64, x64
CRM 4.0 SR1 x86, IA-64, x64
R3E 4.7 x200 SR1 x86, IA-64, x64
SolMan 3.2 SR1 x86, IA-64, x64 "
+//////////////////////+//
According to all this information, may I move our 4.7x110 system onto a Windows Server 2003 SP1 64-bit, SQL Server 2005 64-bit, and after that we would upgrade to ECC 6.0?
Thanks !!!
Eva
Edited by: Eva Verdaguer on Jul 25, 2008 12:41 PM

Sorry, I forgot posting the SAP answer, which is also "Yes":
30.07.2008 - 16:19:00 CET - Respuesta by SAP
Dear Eva,
Yes, you can move to the 64 bit platform with SQL Server 2005 according
to note 960769.
Information in note 905634 means there is no installation DVD for
release 47x110 for SQL Server 2005. So it is not possible to do a fresh
installation of 47x110 except if you follow the workaround of note
899111 (for x64).
Best Regards,
Manuel García Guardiola
SAP Active Global Support - Netweaver Web Application Server
****************************************************************+
Thanks very much for your message, anyway.
Regards !!
Eva

Flash Player 11.2.202.235, IE9 64-bit, Windows 7 64-bit, HP laptop - objects do not display-seevideo

Flash Player 11.2.202.235, Internet Explorer 9 64-bit, Windows 7 64-bit, HP laptop - Flash objects do not display properly in browser; right-click Settings window does not display properly either; i have to scroll down and back up to see parts of the Flash object but it disappears anyway when i mouse over.
I took video of the issue and have now linked to it. In the video, I show two browser tabs - one from this site and one from a Bank of America (BoA) site with a flash object. You can see how the BoA flash object disappears when I make that tab active.
Please help!
Link to video:
http://www.youtube.com/watch?v=PCLJcxmzPkI&feature=youtu.be
Message was edited by: Jleon21612012

Thanks for the reply and the link. The driver update did not work because it says I have the latest one installed - even though the driver date is 10/8/2009. It's the Intel(R) Graphics Media Accelerator HD, version 8.15.10.1968.
Can you believe that...the latest is from 2009?! I tried to install an updated version anyway - first by going to the Intel site. I found a driver update from Jan 2012 that matches my system, but the install aborts with the error message "A customized computer manufacturer driver is installed on your computer. The Intel Driver Update Utility is not able to update the driver."
So, I searched through the HP support site and finally found a link to my computer:
http://h10025.www1.hp.com/ewfrf/wc/product?product=4121236&lc=en&cc=us&dlc=en&task=&lang=e n&cc=us
And I downloaded and installed the "same" driver anyway:
Intel Graphics Media Accelerator HD Driver ►
2009-12-04 , Version:8.15.10.1968 B, 29.91M
This package contains the driver for the Intel Graphics Media Accelerator HD in the supported notebook/laptop models.
But it does not correct the problem.
Maybe this problem is because of an old graphics driver - but this is apparently a dead end for me.
Is there any possibility it is caused by something else?

Where did 8 bit / 16 bit / 32 bit go?

Similar Messages

Maybe you are looking for