Where did everyone's new Mac Pro ship from?

Mine shipped from "BLOOMINGTON, CA". And it only took 3 days, with FedEx Ground. Interesting, I thought it's manufactured in China?

I got a shipping notice for mine this evening. Fedex says they picked it up in Fullerton, CA.
My understanding is that Apple routinely does the CTO/BTO final configurations in the USA.
Regards,
George

Similar Messages

Where can I purchase new Mac Pro in RSA?

Where can I purchase new Mac Pro in RSA?

Use the link here to find a Reseller...
http://www.apple.com/za/buy/

Boot up Tiger from Lastest Mac Pro shipped from Apple

Ok, I am testing to upgraded our Tiger to leopard for the Marketing department. my problem is, the lastest or current mac pro that from Apple is not booting up from Tiger so I can install it on a 250gig hard drive brand new. I hold down the "C" and nothing comes up to prompt me to install. Mac Pro comes with 6gig and 650gig hard drive leopard, but I need to downgrade the OS to Tiger to test it.
Any suggestion what I did wrong or you can downgrade OS on this new model from Apple?

You can't boot the new mac with Tiger.

New Mac Pro (Late 2013) and CC 2014

Ok, I've been working on one of the new Mac Pro's from late 2013 and using CC 2013 with R3D footage quite successfully (though without great debayering performance on the R3D - I know it's supposed to be improved in CC 2014).
I'm running 10.9.2 Mac OSX.
When football season here in the states starts in two weeks, I will have a VERY deadline intensive 30 minute television show that I have to turn around from Saturday night at 2am until 8am Sunday morning.
I have purchased CC 2014, but have read in the past few weeks about the headaches the combination of OS 10.9.3 (and .4) and CC 20014 have caused.
My question is, where do we stand with those issues, and what would the community / Adobe moderators say about me heading up to the latest OS and CC 2014 under these circumstances? Thanks so much for the insight everyone.
Banks

jameskachan wrote:
…The obvious reason [sic] seems to suggest…
That's what it suggests to you, in the limited scope of your vision and knowledge, and without your having provided detailed specs about your hardware.
Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
We don't even know what your specific issues are, and for all we know you may be running the pathetic, buggy Yosemite OS—which Apple is giving away for free.
In this case, you have been enormously fortunate in that you received a reply from none other than Gµrµ Chris Cox, a top Adobe engineer who has been writing Photoshop code since the last millennium.
It's hight time you drop the attitude and avoid further embarrassing yourself in a public forum. Just my two cents.

How to transfer fcp7 to new mac pro mavericks

OSX 10.9.5
2014 Mac Pro (trash can)
2.7 GHz 12 Core Intel Xeon E5
32GB 1867 MHz DDR3
Hey everyone, I need some help.
I would like to transfer FCP7 to my recently purchased Mac Pro.
I'm in the process of upgrading, but first need FCP7 to work before making all the final changes.
I would attempt a clean install but the original FCS, along with the FCP7 upgrade discs are currently lost ever since I moved from NY TO MN.
I migrated FCP7 directly from my 2010 Mac Pro into the new Mac Pro applications folder. But immedialetly after trying to launch FCP7 I get "Final Cut Pro cannot be opened because of a problem."
Did I miss any hidden files or folders located elsewhere in the CPU?
I would like to run FCP7 on the new Mac Pro (2014) from my previously purchased copy currently located on my older Mac Pro (2010) which is also running Mavericks.
I hope I made enough sense to you all, enough to get pointed in the right direction.
Peace and thank you,
B-NYC

BrooklyNYC11222 wrote:
I migrated FCP7 directly from my 2010 Mac Pro into the new Mac Pro applications folder.
How did you do this? Without the original install discs, your only option it to use the Migration Assistant.app.
If you just copied the application, it will not work.
If you did get if from your older computer via the Migration Assistant.app, then trash your FCP preferences.
You can download (free) Preference Manager from Digital Rebellion and it will do all the work for you:
http://www.digitalrebellion.com/prefman/
Your FCP preferences will be reset to default settings the next time you launch FCP.
MtD

How do I speed up Lightroom on my new Mac Pro (2013)?

I have tried everything suggested in the forums like running imports in parallel, etc., and all my data is on the super fast built-in PCI-Express SSD of the Mac Pro. However, I have numerous speed problems with Lightroom 5.3 (latest version) when importing and working with photos.
Right now, here is what I am doing
* Performing three parallel imports for maximum speed as suggested in September, 2013 (to supposedly boost input from 25% CPU to 60% on a multi-core machine).
* Buildling 1:1 previews and all the other suggested official Lightroom Performance tips
And what I am getting:
* Between 11 to 15% CPU utilization, even when running imports and building previews in parallel.
* Data being read at only 2.5 to 6.5 MB per second.
* When I look at images even after the previews have been built, I see a sharp image for about 1/100th of a second, then it blurs for about 3/4 of a second, then it sharpens up again in about one second, as if Lightroom is redeveloping it again despite having a 1:1 preview fully built.
To my workflow, this is horrifically slow. I am tasked to go through about 5,300 sports photography images in an hour if possible, many taken at over 10 frames per second with a 1D X. To do this efficiently requires being able to INSTANTLY see the exact sharpness of a photograph, not being blurred for a full second, so that I can pick out the sharpest image from a burst of many images of each top play.
I love the features of being able to flag/unflag with P and U, star with 1-5, go full screen with F, zoom with Z, crop with R, etc., but the productivity potential that those fantastic keyboards shortcuts have is being utterly defeated by the fact that Lightroom is going SUPER slow even on this brand new 6-core Mac Pro. It literally is much slower than using Picasa or FastStone on a cheap Core i3 laptop with a regular HDD.
How can I configure Lightroom to use all six cores and more of the hard drive speed to speed up my workflow?
Obviously, Lightroom should be able to do much better if it were using more than 15% of the CPU and more than 1% of the SSD capability.
For me this is a SERIOUS problem and is preventing my new Mac Pro purchase from being any use to me. I am having to use other software right now to meet my production deadlines, and then go back through it later on Lightroom at a glacially slow pace. After a couple weeks of this duplicated workflow, I am just getting tired of it.

Maybe you could help us help you by providing your systen details in full the location of your files.
Thank you...

New Mac Pro problems

I got a new Mac Pro today from Apple and have been having major problems with it.
The OSX installs ok and i get through to normal screens etc.
the problem arises with the installation of the Apple Intel Security patch. on restart I get the "your need to start your computer" etc. Which normally means a kernal problem.
Every time ive booted or restarted the computer I get the same.
Ive tried booting it from cd no good. Ive tried safe boot - No good. Apple help desk - Useless.
Have done a disk utility check off the CDcd, all ok so it could be software related. Or it could be some hardware problem

Hi
Anything at Dr Smoke's Xlab page helpful?
http://www.thexlab.com/faqs/kernelpanics.html
Steve

Where is the best shop for new mac pro's memory in America ?

Dear all.
Thank you for your advice in advance.
I bought new mac pro at yesterday. But here is japan,so really expensive new mac pro's memory.
So I want to buy memory at America by internet.
If you know where is the best shop for this memory's price and stability,please let me know.
Really thank you for your advice. I want to buy 16G in now.

I bought a "8GB FULLY BUFFERED PC6400 DDR2 ECC (FB-DIMM) 800MHz SPECIAL APPLE KIT (Four modules 2GB) MB194G/A" from Memoryamerica.com for $395.
killer deal.works perfectly, no overheating , no issues.
They shipped the sameday. they say on their website that they are the only website shipping the new memory.It must be true, people who ordered from OWC, macsales are still waiting...I am happy I ordered from them.They even have the 4GB modules in stock.These guys are really good.
http://store.memoryamerica.com/fully-buffered-pc6400-ddr2-ecc-8gb-apple-kit.html

New Mac Pro not shipping until Feb 13 !!!?

I just ordered a new Mac Pro this morning with the default options plus a Nvidia 8800 graphics card. My order status says it will ship by Feb. 13 to avive by Feb. 14 (I used overnight shipping). I understand that making a change can delay an order a bit but wow that is quite a delay. Anyone think it will ship early? I've never ordered from the online apple store and I'm not sure what to expect. I'm hoping that they are just being very conservative, if not this is going to be a long 5 weeks of waiting
Thanks.

I just cancelled my order - I don't want to wait up to 5 weeks for my new Mac Pro.
I re-ordered with the stock configuration and also ordered a separate Apple supplied Nvidia 8800 GT which is now on the US site for $350 - this will ship later when available. I called Apple and they checked with an engineer and told me the 8800 won't work concurrently with the stock ATI card but that it will run with two 8800.
SLI in Bootcamp would be nice but I doubt two 8800s will support it. Has anyone heard of anyone getting SLI in a Mac Pro (OSX or Bootcamp)? I'm going to try the Nvidia and ATI together because I want to run 2 monitors with an optional TV for the occasional Front Row use. I'll keep this thread updated and let everyone know if it works - I don't always trust the info from any technical support department.
Does anyone know if two GPUs (i.e. two 8800s) will give a performance boost over one card in OSX with apps like Final Cut Studio 2?

I need an anti-glare film for my brand new Mac Pro 17". Where do I go?

Does anybody know where to find an anti-glare film for a new mac pro 17"??

Does anybody know where to find an anti-glare film for a new mac pro 17"??

What make/model hard drive ships in the new Mac Pros?

Anyone know the make/model of the 500GB drive shipping with new Mac Pros?
Have a new compy on the way and would like to pick up a matching drive to set up a RAID 0 with. I know it's not strictly necessary to have the exact same drive, but what can I say, I like to be orderly like that.
Thanks!

If you want matching drives for RAID, buy a pair of Seagate or WD RE2. They may be the same size, but the drive Apple ships, I would have gotten the OEM 320 and used it for the backup/emergency system drive (and put in FireWire/SATA case.
RAID boot volumes? mirror? scratch? There are better ways to use four drive bays, and I would recommend a pair of 750GB RE2 or Seagate drives for their performance.

My brand new mac pro always had Internet connection issues at school. WHY is that? I see the school's Internet working perfectly fine on other PC's, but there is never a day where my mac doesn't have Internet connection issues at school. How do I fix it?

I got my mac pro in the middle of August. School started the week after. Internet was working perfectly fine at home. But at school, I never had a good connection. Sometimes on the good days I get a connection when I'm sitting at the exact spot in class I always sit at. It's ridiculous and it's frustrating. I invested my money into this laptop and I'm beginning to regret it. I thought it was the school's Internet, but I don't see Internet issues with other PC users. It's most frustrating on registration days and I'm trying to register for my classes before it gets taken, but again... Internet connection issues. It's random. Majority of the time, it doesn't work at all. I've done Network Diagnosis and turning WiFi off then turning it on again. I've done everything I could. I put my money on this laptop and it was a lot of money. I could have bought an 800 dollars laptop and I would have Internet connection anywhere on campus. So, I don't want to continue everyday to regret on buying this laptop every time I try to connect to the Internet at school or Starbucks or anywhere else. How do I fix this? What's the problem ?
At school, I heard this guy had a problem with Internet connections too and he owned a new mac book pro. He said something like Apple messed up on something, but he fixed it. If I knew mac book pro's had these issues I wouldn't have bought it in the first place. It's freezing on me every other day. It's ridiculous. But what concerns me the most is the Internet connection. So someone please tell me what can I do next to prevent the problem? Am I doing something wrong maybe?

Hi Kevin,
I'm using an XLR input mic which is connected to the phantom power enabled XLR mic socket on a USB M-Audio M-Track. The M-Track is connected by USB to the Mac Pro - so effectively I've got an M-Audio USB soundcard with a mic input. I've also tried a microphone that is a straight XLR to USB cable (guessing with some soundcard chip buried in the usb plug) but that also yields the same effect of bad latency, intermittent quality, stuttering and repeating and echoing (without the speakers on during record so its not feedback).
The mic works absolutely fine with other recording applications I have on the mac at the moment - albeit non-adobe ones (tested it on the EasyAudioRecorder - and it lives up to its name. it's easy)
I will try with Audition and report back, but sitting here right now I can imagine it would work fine with audition too - it just seems to be the way premiere is set up for recording into the timeline is a bit sketchy. I'm willing to accept it might well be a quirk with the new Mac Pro trashcan - I'm not weighting all the woes on premiere.
Any thoughts or am I out of luck to sit with my fingers crossed for a fix in the next round of updates?
Nathan.

New mac pro, CS5 crashes, where to start?

I have a new mac pro which crashes daily while using After Effects (and photoshop). I've seen some indication that this could be a driver issue with the 2 nvidia cards that came preinstalled, or an Adobe issue. Running 10.6.4 Snow Leopard. I can recreate this sometimes by scrubbing the after effects timeline with a spotlight casting a shadow on another layer. The system locks up, left monitor flashes black and I have to hard rest. This is super frustrating, apple has twice told me it's Adobe, but I don't know. All I do know as a business owner is that I'm $13,000 invested in hardware / software that don't seem to work together and I don't have many other options as this is what i do for living. Any thoughts at all? Anyone have any ideas?
2x2.93 quad core xeon
16gb 1066 ddr3
level 5 raid with 4 1TB drives
OSX 10.6.4
MacPro4,1
2 nvidia 120 cards
2 24" cinema displays (one per card)
thanks in advance
scott

For sure it is really frustrating, especially when you convinced the company you work with to switch from FCP to CS5...
I have the same problem with a Mac Pro bought in April and a GTX 280... We were pretty happy with Premiere Pro, when editing a feature shot on RED 4K HD. It is the more stable release of that soft I ever seen, and I'm using it since Premiere 5.1 and the mini-DV.
But I'm disappointed by After Effect, which use to be alway stable in the previous version I used. We're working on a 3300$ computer, using a 450$ graphic card, and the two Samsung monitors keep flashing before AFX craches... That happen every 15 minutes.
The GeForce driven is updated. We have also a Geforce GT 120 in the Mac Pro, to plug a Wacom Cintiq 12WX on it... The screen of the wacom doesn't flash when it happens to the Samsungs, that's why I'm thinking of an issue involving the GTX 280. Anyway, nVidia does not provide any driver for Mac for the GT 120...
So it's probably more a graphic card issue, than a software one... But if someone has any other idea to get rid of this problem (unactivate open GL does not change the problem)... ?
Thanks in advance for who may help...

New Mac Pro -- Where's the 2nd HDD?

I started up my new Mac Pro today (actually a refurb from the Apple Store) and ran Migration Assistant. Pretty impressive how the new Pro is working almost exactly like the Mini I had previously.
I inserted a 750GB HDD in one of the drive bays alongside the 250GB that came with the Pro, but I don't think it's showing up.
In Finder, under "Devices," I'm seeing "Macintosh HD" - twice. The two drives are identical, what I guess you would expect to find on the primary drive. On the desktop, there is just the one Macintosh HD, no duplicate.
I don't see an empty 750GB HDD anywhere? Will it not even show up until I've run disk utility on it and formatted it?
Lots of questions... that's for starters....
Thanks,
--PS

Erase doesn't alter the partition tables, only the user space or partition you see. To format or initialize, and to insure it has proper setup, use Partition, and insure that it has GUID, which has replaced the older and outdated APL format.
You can see what format it has if you click on the drive icon and look at the bottom.
Journaling helps the system keep the directory and file system and gives a way to 'replay' recent modifications on a Safe Boot. Journaling has been the default since...? and been an option at least back in Panther.
If there are no user volumes or partitions, then there should have been an alert message on startups.

New Mac Pro for Photoshop

Hi,
I currently have a 2008 Mac Pro 2 x 2.8 Quad Core Intel Xeon that I am thinking of upgrading.
My questions are as follows.
Which set up would be best for photography based work, mainly Photoshops CS6 and Lightroom 4
I use a Drobo as my main working raid style hard drive.
I'm happy to spend money on a quality system but want to know it will be optimum for what I am using and dont want to just go for the 'top of the range' if it is pointless for the type of work I am doing (I never use video software at all)
Would there be a 3rd party company that would be better suited to set it up exactly for photography based work.
Am I right in saying the current Mac Pro's do not have thunderbolt or USB 3.0, so with that in mind, how long do people speculate that the new Mac Pro's will be available.
Thanks in advance.
Jason

YOU can see what Intel says (said?) at the Intel Conference this fall where they lay out for their vendors and everyonne what they plan and have in the oven for the next year.
Intel fell behind last year's plans with the complexity and issues they ran into, plus changes in the landscape. So did Nvidia with their new line. Hence everyone's plans went bonkers. And any IvyBridge Xeon? doesn't look like anything until this time next year, end of 2013. 2014 does have the next tic-toc and improved chips and memory architecture. DDR4 may get out of the labs.
That much is knowable.
But what you can do today: 2010 6-core 3.33 w/ 4x8GB and GTX 670 plus some nice storage hardware.
See this guy's articles and advice, a heavy graphics perspective:
www.macperformanceguide.com
Oh, and just my own personal.... a lot of 2008 owners are not happy campers for various reasons with power, stabilty, sleep/wake/freezes and maybe that 'first Mac Pro w/ EFI64" is showing crack in seams.
2010 for $1800 and up to around $3k - and your system is worth over a grand still once you can move over.

Where did everyone's new Mac Pro ship from?

Similar Messages

Maybe you are looking for