Where did my log files go?

I just installed OAS, and deployed a small web application (JSP and Servlets). The app is working fine with a couple of exceptions. I went to check the log files to see what went wrong, and couldn't find them.
I realize there are several components of the server, each of which having their own log files. After searching for a few minutes, I did a search through the entire ORACLE_HOME directory looking for files containing text which should have appeared in the log files. I was unable to find any such log files.
Do I have to enable logging? Point it to a certain file? Am I just not looking in the right place? Any help would be appreciated; I'm a bit lost.
When deploying and running the application in Tomcat, the logging is stored in the 'logs' directory, just as you would expect. So I know that the logging is working; I just can't seem to find it when the app is running in OAS.
Thanks,
-Dave

You may be looking for the stdout/stderr process output.
Almost all components in Oracle Application Server 10g
(9.0.4) are managed (at the process level) by OPMN. To
preserve the stdout and stderr of every process, all
processes started by OPMN have their stdout/stderr
redirected to a file (one file for each running process).
This file is sometimes referred to as the "console log".
Console logs are located in $OH/opmn/logs and have a
filenames containing '~' chars. Identifying which
console log file is associated with which process
should be intuitive.
When a process terminates and is replaced by a new
process, console log output from the previous process is
preserved and the replacement process appends to the
end of the console log file.
I just installed OAS, and deployed a small web
application (JSP and Servlets). The app is working
fine with a couple of exceptions. I went to check
the log files to see what went wrong, and couldn't
find them.

Similar Messages

Where do archived log files go?

Hi Guys,
This should be a simple one but is turning out to be a real
pain. Where do the log files go when they are archived? I am
looking in the logs directory but cannot find them anywhere ...
even after searching the entire hard drive. I have maximum number
of log files set to 10 and the maximum log file size set to 5000kb.
Thanks, Carl.

I'm having the same frustration as the original poster. I
have CF8 installed under Apache HTTP Servers (windows) using the
defaults mostly.
In CF7, if I archived a log file, the old file would be
renamed with a numeric suffix (application.log.1,
application.log.2, etc.) in the cf_root/logs subdirectory, and a
new log file would be created. However, in CF8, the archive
function seems to just delete the old file and create a new one.
I've tried searching fot the archived file with no results. I've
also restarted CF; still no archived logs found.
Is there something in the CF8 Administrator that must be
explicitly set to active archiving? The only setting I see is
"Maximum number of archives: 10" which is the default.

Where did my synced files go? I synced them on the tablet, now I want to get them on my PC

Where did my synced files go? I synced them on the tablet, now I want to get them on my PC
How do I access them?

Via Creative Cloud.
One caveat: If you want to work with PS Touch's native file format (which is PSDX), you'll have to have Photoshop CC (or CS) and the PSDX plug-in.
Another option would be to export any projects as the PSD file format and open those in Photoshop or Photoshop Elements. If you import these back into PS Touch, note that PSD files will be automatically flattened.

Where is this log File

Hi ,
If anybody could guide where can I check this log file "EAIObjMgr_enu_0016_16777244.log" ?
Thanks :-)

If you are asking where to find the log file, it will be on the Siebel server running that EAI process (so you may have to look at multiple servers to find it).
The exact location varies depending on operating system.
Windows -- \siebsrvr\log
Non-Windows -- /siebsrvr/enterprises/[enterprise]/[server]/log
Hope that helps.
Stevan

Where is the log file in 10.1.3 AS?

Hi
I am writing System.out.println statements and want to check those messages in the log file. But not sure where the log file is. Appreciate if you can respond.

By default all OC4J stderr and stdout messages go in following file:
$ORACLE_HOME/opmn/logs/OC4J~home~default_group~1
If you want you can change it, refer following for that:
http://download.oracle.com/docs/cd/B32110_01/web.1013/b28950/sysprops.htm#CHDDCCJI
Thanks
Shail

Where is the Log file Location ?

Hi,
JDeveloper : 11.1.1.6
I need to find the log file (text file) that is shown in console window.
where is it located exactly ?!
Thanks

Thanks for the reply,
Actually my problem is "Farsi Language" (RTL) :
when I print the data retrieved from DB into Log file, it's not readable ! eg : ???????
first I Had the Idea that JDeveloper's Log viewer is not able to show Farsi characters and I wanted to view it in another text editor.
but now I have the same problem in other text editors as well.
I think the encoding in which the log is written needs to be changed into say : UTF8
So , where can I change that encoding ?!
Thank you very much

Where did deleted iPod files go?

Hi there! Any and all help with this issue I recently stumbled upon would be greatly appreciated! Thanks!
I purchased my first iPod in February thinking that it would hold all of the music from my CDs. After uploading them, it did not. So, I deleted some music and decided to keep those files in a separate personal file folder so that one day, when iPod comes out with an even higher memory iPod, I could upload the songs that I deleted. Now, when I just looked in that file folder, all of my files are GONE! Where did they go?
I just want to be able to keep track of the files I delete so that I can one day upload them.
Thanks again!
Sincerely,
Dan

Anyone able to help? I would really appreciate it! Thanks!

Where did my Aperture files go?

Hello everyone,
About a month ago I saved my photos by creating a vault. Fine. Since then I have deleted some of those original photos and have added many others. Fine. Today, I realized I deleted some images that I needed that I know were in the vault. So, I decided to restore my library. I did this ONLy because in the warning pop up it says that the photos in my existing library will be PRESERVED but will not be merged with the restored images. Ok, fine too. So I did this and now the only files I see were the original ones that I first saved a month ago and EVERYTHING else is GONE. Where did they all go? I am about to cry because I think they might have been deleted, but why did the prompt tell me that my files will be preserved? I cant find them anywhere. Am I missing something or did I really screw up? I really appreciate your help. Im pretty new to this. Thank you in advance for your help. Cheers.

See if they are in the Library Package. Go to the Library Package in the Finder. It will be in the Pictures folder unless you chose a location other than the default.
control/right click the Package and choose show package contents. Once inside you'll find your Projects which are also Package files so you'll have to control/right click again to see the contents.
Maybe your pictures are there. It's very important that you don't move or rename anything inside the Library Package. Just find out if they are there for now.
DLS

Where can the log file be found after printing to the PDF printer?

Cannot locate the log file after printing to the Adobe PDF printer. The box was unchecked for delete log file after successful print. Running Adobe Acrobat X Standard (v10.0.0) on a windows 2008 R2 server.

There is usually no log file when the conversion succeeds. Only in certain cases are their warning or information messages, usually of little interest.

Where is the log file for sutdio workspace?

Hi, All,
I test a process in studio 10GR3, and there is an error as I start the process in the workspace. it said: "check the workspace log fiie for the detail error info...", but I cannot find the workspace log file. I'm appreciated your help and idea. Thanks in advance.
Best Regards,
Bill

the Studio logs will be present under <studio home>/log

Where did the .DOCX file go

I requested a photo of a jobsite from a client. They sent it in a DOCX format (a picture??) My Torch 9800 saved it to Media card, but I can't find it. I looked in Word and everywhere. No luck. Any ideas?

That's a silly way to send a photo, but i happens. A '.docx' file is a Microsoft World Office Open XML file format, in which your client must have pasted the picture into a MS Word file.
Obviously, I don't know where you saved the file on your Media Card, but if you go to your Media icon > menu key > Explore, you can search the entire media card for it, look in all folders, or look for a DocumentsToGo folder, also.
If all fails, can you just open the original email again, view and save again and you should be asked where to save the document.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Where does NWAS log file resides

Hello friends,
Can anybody tell the location of NetWeaver log file, that contains runtime exception and other information regarding execution of J2EE project.
I am using SAP NAWAS 7.10
Thank you

Hi,
the default trace files present in the cluster folder are very useful.
c:\usr\sap\sid\JC<XX>\j2ee\cluster
inside this you have dispatcher and server nodes. under each such folder you have the log files. These log files contain the trace files. dispatcher\log will contain how he dispatcher is going to look for the server nodes.
server\log will contain the real time problem.
reward suitable points

Where did this Make file in my home directory come from?

I found a make file in my home directory. Here are it's contents.
fig4latex makefile
all:
Pacman did update latex over the weekend. Any idea where this file came from?
It's causing my OCD to flare up
I looked at file time stamp and then went to that time in Systemd logs Found this.
Mar 16 19:38:19 tesla slim[799]: If you are changing from PdfLaTeX (-p) to LaTeX (-l), or vice versa,
Mar 16 19:38:19 tesla slim[799]: Now run 'make' to update your graphics files.
More of the surrounding log below.
Mar 16 19:38:57 tesla slim[799]: dactyl: bootstrap: startup startup
Mar 16 19:38:57 tesla slim[799]: (process:10558): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size == 0' failed
Mar 16 19:38:56 tesla slim[799]: Conky: APCUPSD getaddrinfo: Name or service not known
Mar 16 19:38:49 tesla sudo[9911]: pam_unix(sudo:session): session closed for user root
Mar 16 19:38:49 tesla sudo[9911]: pam_unix(sudo:session): session opened for user root by (uid=0)
Mar 16 19:38:49 tesla sudo[9911]: patrick : TTY=pts/7 ; PWD=/home/patrick/scratch/rails_projects/inrealmoney ; USER=root ; COMM
Mar 16 19:38:46 tesla slim[799]: Conky: APCUPSD getaddrinfo: Name or service not known
Mar 16 19:38:36 tesla slim[799]: Conky: APCUPSD getaddrinfo: Name or service not known
Mar 16 19:38:26 tesla slim[799]: Conky: APCUPSD getaddrinfo: Name or service not known
Mar 16 19:38:19 tesla slim[799]: run 'make clean' then 'make'.
Mar 16 19:38:19 tesla slim[799]: If you are changing from PdfLaTeX (-p) to LaTeX (-l), or vice versa,
Mar 16 19:38:19 tesla slim[799]: Now run 'make' to update your graphics files.
Mar 16 19:38:16 tesla slim[799]: pentadactyl: bootsttrap: shutdown shutdown
Mar 16 19:38:16 tesla slim[799]: pentadactyl: All dactyl modules destroyed
Mar 16 19:38:16 tesla slim[799]: Conky: APCUPSD getaddrinfo: Name or service not known
Mar 16 19:38:06 tesla slim[799]: Conky: APCUPSD getaddrinfo: Name or service not known
Mar 16 19:37:56 tesla slim[799]: Conky: APCUPSD getaddrinfo: Name or service not known
Mar 16 19:37:46 tesla slim[799]: Conky: APCUPSD getaddrinfo: Name or service not known
Mar 16 19:37:36 tesla slim[799]: Conky: APCUPSD getaddrinfo: Name or service not known
Mar 16 19:37:26 tesla slim[799]: Conky: APCUPSD getaddrinfo: Name or service not known
Mar 16 19:37:16 tesla slim[799]: Conky: APCUPSD getaddrinfo: Name or service not known
Mar 16 19:37:06 tesla slim[799]: Conky: APCUPSD getaddrinfo: Name or service not known
Mar 16 19:37:02 tesla slim[799]: Conky: APCUPSD getaddrinfo: Name or service not known
Mar 16 19:37:01 tesla slim[799]: Mono: Playback 127 [100%] [0.00dB] [on]
Mar 16 19:37:01 tesla slim[799]: Limits: Playback 0 - 127
Mar 16 19:37:01 tesla slim[799]: Playback channels: Mono
Mar 16 19:37:01 tesla slim[799]: Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Mar 16 19:37:01 tesla slim[799]: Simple mixer control 'Master',0
Mar 16 19:37:01 tesla slim[799]: Mono: Playback 127 [100%] [0.00dB] [on]
Mar 16 19:37:01 tesla slim[799]: Limits: Playback 0 - 127
Mar 16 19:37:01 tesla slim[799]: Playback channels: Mono
If you need anything else please let me know.
Verbose output
Verbose output
Sun 2014-03-16 19:38:19.925442 GMT [s=73377e6d5f2a458c8c92c6c36161ff9f;i=111240;b=c09660a5d55c4510a6a0c5cf2e68a42c;m=8f30c5054;
PRIORITY=6
_UID=0
_GID=0
_BOOT_ID=c09660a5d55c4510a6a0c5cf2e68a42c
_MACHINE_ID=9b7a30f5c46c4db38065a4c9fac7320a
_HOSTNAME=tesla
SYSLOG_FACILITY=3
_CAP_EFFECTIVE=1fffffffff
_TRANSPORT=stdout
SYSLOG_IDENTIFIER=slim
_PID=799
_COMM=slim
_EXE=/usr/bin/slim
_CMDLINE=/usr/bin/slim -nodaemon
_SYSTEMD_OWNER_UID=1000
_SYSTEMD_SLICE=user-1000.slice
_SYSTEMD_CGROUP=/user.slice/user-1000.slice/session-1.scope
_SYSTEMD_SESSION=1
_SYSTEMD_UNIT=session-1.scope
_SYSTEMD_USER_UNIT=slim.service
MESSAGE=Now run 'make' to update your graphics files.
Sun 2014-03-16 19:38:19.925664 GMT [s=73377e6d5f2a458c8c92c6c36161ff9f;i=111241;b=c09660a5d55c4510a6a0c5cf2e68a42c;m=8f30c5132;
PRIORITY=6
_UID=0
_GID=0
_BOOT_ID=c09660a5d55c4510a6a0c5cf2e68a42c
_MACHINE_ID=9b7a30f5c46c4db38065a4c9fac7320a
_HOSTNAME=tesla
SYSLOG_FACILITY=3
_CAP_EFFECTIVE=1fffffffff
_TRANSPORT=stdout
SYSLOG_IDENTIFIER=slim
_PID=799
_COMM=slim
_EXE=/usr/bin/slim
_CMDLINE=/usr/bin/slim -nodaemon
_SYSTEMD_OWNER_UID=1000
_SYSTEMD_SLICE=user-1000.slice
_SYSTEMD_CGROUP=/user.slice/user-1000.slice/session-1.scope
_SYSTEMD_SESSION=1
_SYSTEMD_UNIT=session-1.scope
_SYSTEMD_USER_UNIT=slim.service
MESSAGE=If you are changing from PdfLaTeX (-p) to LaTeX (-l), or vice versa,
Last edited by vapidness_is_rampant (2014-03-18 23:15:45)

fig4latex README wrote:In a large project one would typically place the .fig files in a seperate
sub-directory. In "example.tex" the figures are in a sub-directory named
"figs/" -- changing into that directory and running the fig4latex script
produces a Makefile, one then runs "make" in order to create the .tex and
.eps (or .pdf) files which contain the graphic.
Perhaps you accidentally ran the fig4latex script and it created the Makefile.
Last edited by o_caino (2014-03-19 00:47:04)

Where output to log file stored physicaly?

hello,
I want to setup JAVA WebStarts "Output Options" & "Log to file" by some application, but question is where this information stored physicaly? (registry or some file)
thanks
Nerius

I found i by myself
the problem was WINDOWS NT !
so it stores configuration on
%SystemRoot%\Profiles\<CurrentUser>\.javaw\javaw.cfg
Nerius

HT2518 Where did my migrated files go?

I have just bought a Mac and have never really used one before. I migrated my files from my PC to my MacBook Pro overnight as it was going to be migrating over 50GB. It said it was successful, however I can't find anything that migrated, where is it and how can i find it? i have loked all through my finder and cannot think of where it went. My hard drive has 74gb on it so it must have transferred as this is a brand new Mac and I wouldn't have thought that it would have 74gb on it already, however I didn't look at this before doing the migration so I don't know how much was on it before migration. My PC has windows 7 on it if that helps. Can anybody help me please??

Welcome to Apple Support Communities
Migration Assistant creates a new user with the migrated data. Go to  > Log Out, log in with your new user and you will be able to access to your migrated data. To transfer them to the main user > https://discussions.apple.com/docs/DOC-5472

Where did my log files go?

Similar Messages

Maybe you are looking for