Where did my network go?

I tried to install a wireless laser printer to my wrt54g router and somehow my network just disappeared. The router still works, but the available network just shows up as "linksys". I'm online with it now...
I don't mind having to create a new network, but I'm having trouble doing that.
I reset the button on the back of the router and went to the 192.168.1.1 address and reset to factory defaults, then I tried reconfiguring using the Linksys CD that came with it. I went through all the steps and it kept saying it couldn't find and internet connection. Obviously, the internet wireless internet connection is good because I'm connected via "linksys" now while I type this.
I tried this process about 5 times and now I'm out of ideas, so any help would be appreciated!
fwiw:
I repowered the device after resetting the button, I'm plugged into ethernet port 1, I repowered the modem, I repowered both.
thanks!
Solved!
Go to Solution.

Please follow these steps to configure the wireless settings on the Router and make sure you do it on the Computer which is hard wired to the Router.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
To Connect to the Wireless network on the wireless Computers please follow these steps according to the Operating System.
Windows XP :
Click on Start and goto the Control Panel and double click on Network Connections, Right click on the Wireless Network Connection and click on View Available Wireless Networks and select your Wireless Network and click Connect...Now it will give you the opportunity to put the network/wep key, make sure you enter the correct network key and confirm it...It will connect...
Windows Vista :
Click Start >> Control Panel >> Network and Sharing Center >>Click on Connect to a Network and select your Wireless Network and click Connect, it should ask for your Network Key/Password, enter the correct password/network key and click Connect...It should connect...Once you are connected you should restart the computer, it should connect to Internet...

Similar Messages

Where did "Join wireless network" go ?!

I've previously gotten my Time Capsule to work with the following setup: Cable Modem -> Ethernet Cable -> Airport Express -> Wireless network -> Time Capsule & MacBook Pr.
Yesterday I wanted to do some faster file copying to the Time Capsule so I connected it to my laptop by ethernet cable. For some reason I thought it was a good idea to set TC's wireless mode to "OFF".
Now I want to go back to my old setup but can't seem to get it to work. I've tried replicating all the same settings as before, but it just doesn't work.
The only difference in the setups i see is that what in Airport Utilitys Wireless page previously was "Join a wireless network" has disappeared and replaced by "Extend a wireless network". I'm guessing this is the problem.. Where did "Join a wireless network" go?

Thanks, but let me clarify. My Airport Express settings are the same as before and I don't want to change them since everything has worked fine. It's some solution to how to get the Time Capsule to join the existing network I'm loking for. Going through the default setup only results in Amber blinking and the Airport Utility not finding the Time Capsule wirelessly anymore..

My mirroring icon is no longer showing up on my iPad. Where did it go?

Where did the mirroring icon go on my iPad? I can't find it.

Is your airplay device connected to the same WIFI network as your ipad? I would restart the ipad and the device if they are. And, are you sure your accessing the icon by double tapping the home button and swiping to the right in the multi task bar?

Where did I loose my movie

I have made a movie at length 31 min. The size is 1.19 GB, but when I copy it in explorer from iPhone folder to PC folder the size left is 0KB. Where did 1.19 GB go? What happens? The file is stored as a .MOV, but empty and not playable. Frustrated!

ThomasSommerset wrote:
I choosed to accept lower quality through the transfering in the Awesome app/iPhone explorer. The Awesome app is automatically compressing the files.
As far as I can read 'Awesome app' just zips the files.
iPhone Explorer just copies files, it does not compress or re-encode files.
Are you saying that the video was HD, but was made smaller when exported?
The more I think about this the more I think it is your computer.
If the video plays fine on the iPhone, then it should transfer off fine and at the same resolution it was created at.
So my guess is that your computer is messing up the files.
Once you've tried to get the videos off on another computer tell me how it goes.
I really recommend wifi photo transfer:
http://itunes.apple.com/us/app/wifi-photo-transfer/id380326191?mt=8
This creates a webserver out of your iPhone, and any one on the same wifi network can access the photos and video.
This app can export and preview smaller photos, but will transfer the full resolution videos.
If you shot in 720P HD, then edited in iMovie, then exported full size, you will have a 720P video at the end.

Wheres the old network documentation when installing from 2010 source?

wheres the old network style wiki resources for users who install from a 2010 source? Im installing from a 2010.05 core, and it uses the old network config in rc.conf.
example
#rc.conf
INTERFACES=(eth0)
eth0="dhcp"
gateway="default gw 192.168.1.254"
ROUTES=(!gateway)
#resolv.conf
nameserver=8.8.8.8
nameserver=8.8.4.4
i can ping my gateway and lan members, but i cant ping 8.8.8.8, so that makes sense why i cant ping google.com
am i just not adresing all the conf files, or is this a gateway issue? also, i couldnt get dhcp to work. I set it that way first, it wouldnt not grab an ip. Then once i set it static, and then back to dhcp, it reverts to the static ip either way.
[we really need a resource that shows up on a google search of "arch ROUTES(", or "arch ROUTES(!gateway)", or "arch INTERFACES=" because if users only have access to an older install source (i left my newer source at work, doh), we want them to be up and running, and updated right away]
Last edited by wolfdogg (2012-03-10 22:11:16)

wolfdogg wrote:[we really need a resource that shows up on a google search of "arch ROUTES(", or "arch ROUTES(!gateway)", or "arch INTERFACES=" because if users only have access to an older install source (i left my newer source at work, doh), we want them to be up and running, and updated right away]
Patches welcome :-)
https://wiki.archlinux.org/index.php?ti … did=111704 - it's not pretty, but you can look at the code:
==Networking==
* {{Codeline|[[HOSTNAME]]}}: Set this to the hostname of the machine, without the domain part. This is totally your choice, as long as you stick to letters, digits and a few common special characters like the dash. Don't be too creative here, though, and when in doubt, use the default.
* {{Codeline|INTERFACES}}: Here you define the settings for your networking interfaces. The default lines and the included comments explain the setup well enough. If you do not use DHCP to configure a device, just keep in mind that the value of the variable (whose name must be equal to the name of the device which is supposed to be configured) equals the line which would be appended to the {{Codeline|ifconfig}} command if you were to configure the device manually in the shell.
* {{Codeline|ROUTES}}: You can define your own static network routes with arbitrary names here. Look at the example for a default gateway to get the idea. Basically the quoted part is identical to what you'd pass to a manual route add command, therefore reading man route is recommended if you don't know what to write here, or simply leave this alone.
* {{Codeline|NETWORKS}}: This enables certain [[network profiles]] at boot-up. Network profiles provide a convenient way of managing multiple network configurations, and are intended to replace the standard {{Codeline|INTERFACES}}/{{Codeline|ROUTES}} setup that is still recommended for systems with only one network configuration. If your computer will be connecting to various networks at various times (e.g., a laptop) then you can configure profiles in the {{Filename|/etc/network.d}} directory. There are template files included in {{Filename|/etc/network.d/examples}} that can be used to create new profiles.
Remember to read all the news back to mid-2010: http://www.archlinux.org/news/

Where did Wi-Fi Scan go in OS 10.8.4?

I realize that Wi-Fi Diagnostics was replaced by Wireless Diagnostics in 10.8.4 but where did Wi-Fi Scan go? It was a sub-program of Wi-Fi Diagnostics and I would have thought that it would not have vanished completely from Wireless Diagnostics. On any given day there are 10-15 visible Wi-Fi networks in my community and sometimes I find myself competing with others using the same radio channel that my Time Capsule is set to. If I were experiencing a problem I used Wi-Fi Scan to find a channel that was not being used. Theoretically, setting the Wireless Options in Airport Utility to Automatic should aleviate co-channel interferrence between my Time Capsule's automatic settings and those of my neighbors but that was not always the case. I found that manually finding an unused channel works best for my Time Capsule.

If you look below you will see that I have the older and newer Wi-Fi Scans installed. The older Wi-Fi Scan did show the hidden networks but not the names. My network is hidden and it shows my network with a ✓ mark next to where the name would normally be. It shows both the 2.4 GHz and 5 GHz networks. If I click on the Menu Wi-Fi signal indicator and force the system to "Look for Networks..." with the Wi-Fi Scan window open Wi-Fi Scan does a scan on its own since it seems to always be in the Active mode from the time you open it. Once it re-scans it sees my network names and displays them. I am unsure if it does this for others in my neighborhood because I don't see any other hidden networks.
The new Wi-Fi Scan that is located in OS 10.8.4 is not Active when it is first opened. You have to tell it to perform a scan. After it scans it sometimes shows my hidden network and its name but it only shows the 2.4 GHz network and not the 5 GHz network. I said sometimes because it does not always display my network. I have yet to do a scan and see my 5 GHz network or any other 5 GHz network in my neighborhood. I'm not sure it is scanning for 5 GHz networks.
I'm sure the idea was to make both the older and newer Wi-Fi Scans work the similarly. They are not identicle and are only similar in appearance. Their scan results are never the same, they are only similar.

Where is the network setup stored?

Hi all
My time capsule died and I bot a airport extreme. The setup went automaticly but I lost my old parameters.
Where are the network prefs stored? I would like to go back with time-machine and to see my old network-setup.
Thanks in advance
kk

Yes my computer backups automaticly - thanks god for time-machine ,-)
I have a static IP (as well as dynamic as it seems) and a server behind a firewall-setup. Thats why I would like to check back my old setup and prefs. But since Airport Express did everything automaticly - they are gone...

Where did they all go?

Ok when I first got my Ipod Nano a week before my birthday, mid November. My mom and I went to visit my Dad in Alabama. (I live in Texas) I got my Ipod Nano and I started working with the software on his computer. I got about thirteen songs. I come home, insert the software and the Nano and succesfully download ten more songs onto my Itunes Library. Now I'm ready to put on these ten new songs. So I disconnect and reconnect the Nano and it give me these little boxes of stuff that say that I'm unauthorized to play these songs on this computer. While my Nano is saying not to disconnect. So I just click ok. I get out of Itunes and all that, to the point that my Ipod no longer flashing "Do not disconnect." I look at my Ipod and those thirteen songs are GONE. Without a trace. So I restarted my computer and downloaded the ten songs. Now where did those thirteen songs go? How can I get them back? They aren't in my library. I just don't know. Any ideas would be helpful.
-Renee07
Windows 2000

Several ways to 'merge' the two Libraries:
- Burn the 13 music files to a CD or DVD (even a floppy disk) and copy them into your PC
- Use a USB 'Flash' drive to copy over the songs
- Use the iPod as a transfer device, as this extensive Apple link explains
- Network the two PCs and directly copy the files
- Sync the files to the iPod and use a recovery program to extract them from the iPod to your PC: See http://discussions.apple.com/message.jspa?messageID=1293794#1293794
The first two options would be the easiest. The others are there just for completeness and 'giggles'.
Shouldn't be too hard. Best of Luck

Wow . . . where did all music go?

i am trying to transfer my songs from my iPod onto a registered new laptop. i managed to transfer some of my old library by home network onto this new laptop, but not all of it transferred.
i tried following the instructions provided for tarnsferring music to a new computer but here's the gut-wrenchingly frustrating and convoluted trouble i am having: when i open my iPod from My Computer 1) there is no icon for iTunes. there is one for Music so i figured that was good enough. but, only a fraction of what is actually ON my iPod is in this folder. nonetheless, i transferred it anyway to My Music folder on my harddrive.
then i opened iTunes. i now have only songs i purchased from iTunes from the last month, and not - oh - 98% of my other music. where did it go? i can still see much of my music in My Music folder on my hard drive, but it doesn't show up in iTunes.
why is it so (multiple expletives) difficult to add music from my iPod into a pre-existing music folder on my laptop? if the computer is registered, why can't i see all my music in iTunes from any registered computer i own? what is the point of resgistering otherwise?
please help. thank you

ah, this is cute. now that i dragged and dropped my other music into the iTunes library interface, and it has begun copying and coverting files (which i had already done quite some time ago), i no longer see music that i have purchased in the last two weeks on this very computer.
all i want is to have the music on my iPod put onto my computer, added to the music i have purchased on this computer.
why is this so difficult?

How do I delete "My Web Search" toolbar that just appeared and where did it come from?

how do I delete "My Web Search" toolbar that just appeared and where did it come from?

You have an item installed that is considered malware/spyware/adware. To see the Plugins reported with your question, click "More system details..." to the right of your original question or, on the Firefox menu, click Tools > Add-ons > Plugins.
*My Web Search Plugin Stub for 32-bit Windows
This type of pest is usually installed along with software you download from the internet; generally free programs, but not always. Carefully watch for "extra" items that will be installed and un-check or opt-out of them.
#You can check to see if you have any of these from [http://www.google.com/search?q=%22Fun+Web+Products%22&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:es-ES:official&client=firefox-a|"Fun Web Products"] installed:
#*Control Panel > Add or Remove Programs, click on any that you find and click "Remove": Ask.com Bar, My Search Bar, MyWay Speed Bar, My Web Search Bar, Fun Web Products Easy Installer
#*See:
#**http://www.safer-networking.com/removemywebsearch.php
#**[http://www.pchell.com/support/mywebsearch.shtml PC Hell: My Web Search Removal Instructions]
#**http://helpint.mywebsearch.com/intlinfo/help/toolhelp.jhtml#q3
#Also see: http://kb.mozillazine.org/Uninstalling_toolbars
#'''You '''MAY''' need to change a preference''' if when typing one or two words in the URL/Location/Address Bar sends you to some search page other than the one you expect. To reset your default URL/location bar search provider:
#*Enter '''about:config''' in the address/URL bar and press the Enter key
#*If you see a warning, accept it (Promise that you will be careful)
#*Filter = keyword.URL
#*Below the Filter, if keyword.URL is '''bold''', right-click on keyword.URL and choose "Reset"
#*Restart Firefox (File > Restart Firefox)
#*See: http://kb.mozillazine.org/Keyword.url
#'''You '''MAY''' need to reset your homepage''' if some search page that you do not want or expect opens when you start Firefox. Firefox can open multiple home pages. Home pages are separated by the "|" symbol.
#*See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
'''Other issues needing your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins. 
 
*Adobe Shockwave for Director Netscape plug-in, version 10.1
*Adobe PDF Plug-In For Firefox and Netscape 8.2.6
**Very old version. You may want to remove/un-install in Control Panel > Add or Remove Programs before installing the new version.
**Current versions are 9.2.4 and 10.0.1
**Info about version 10:
***New Adobe Reader X (version 10) with Protected Mode was released 2010-11-19
***See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
*Shockwave Flash 10.1 r102
*Next Generation Java Plug-in 1.6.0_22 for Mozilla browsers
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
#**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
#**Click "Save to File"; save to your Desktop (so you can find it)
#**After download completes, close Firefox
#**Click the installer you just downloaded and allow the install to continue
#***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#**'''Download link''': ftp://ftp.adobe.com/pub/adobe/reader/
#***Choose your OS
#***Choose the latest #.x version (example 9.x, for version 9)
#***Choose the highest number version listed
#****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
#***Choose your language
#***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
#***Windows: choose the .exe file; Mac: choose the .dmg file
#*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
#**''Also see Download link''': http://get.adobe.com/reader/otherversions/
#**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Where did the thread go?

I created a thread recently about getting free Windows 2008 and other software from Microsoft but it has vanished! I'm perplexed, where did it go?
I don't think it was an illegal way to get access to the software since the website is supported and promoted by "Microsoft Developer Network" on campuses, and eligible students and administrators can download stuff from there only after proving their identities. I had bumped into it yesterday and came to know that my school was included and thought sharing it here would be beneficial to some needy students/admins who wish to run those software but don't have any financial mean to buy them.
Message Edited by Maliha on 10-09-2008 04:33 PM
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel
Solved!
Go to Solution.

Thank you for the explanation however I still fail to understand how was getting free software by being a student or an admin falls under the following rule:
"No commercial solicitation, other than advertisements placed by Lenovo. This is not intended as an online shopping or trading forum. Members may not post inventories of items, or list items for sale on a routine basis. "Wanted" posts (e.g., a member seeking a 701c system) are permitted on a one-off basis. Individuals may also post single Lenovo products, or directly related accessory items as "for sale" in the general discussion area. Posts for non Lenovo related products are not acceptable (so no cars, boats,planes, tennis rackets,MP3 players, for example). Discretion of forum administrators to remove an item is reserved in all instances."
erik wrote:
one of the moderators here moved it out of sight as you posted an external link with no explanation.
the community participation rules prohibit commercial solicitation, and this is borderline since it promotes microsoft.
it's best to let microsoft promote their own products no matter how good the deal may be.
thanks for understanding.
Message Edited by erik on 10-09-2008 07:44 PM
Well, the subject clarified everything that needs to be clarified. In my opinion the post was neither a "for sale" ad nor was of any trading nature. Also, if you think it was promoting Microsoft then many computer companies advertise their (MS) products, in fact they get paid for doing so.
I'm not argumentative but next time I would think twice before posting something of beneficial nature!
Message Edited by Maliha on 10-10-2008 06:16 AM
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

HP LaserJet Enterprise 500 551dn - where did the drivers go?

I go to the download page to download the drivers for this 551dn. I download all windows 7, 8, 8.1, 2008, 2012, so that i can put them on my print server. I downloaded them from here..
<http>//h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5081348&lang=en&lang=en&cc=lamerica_n...
when i get the file, lets say for windows 7/64bit, i choose...
HP LaserJet Enterprise 500 color M551 Printer Series PCL6 Print Driver (no Installer) 61.130.04.12834
24 Sep 2014 21.3
I get the file downloaded (LJEnt-color-M551-Drv-no-installer_12297.exe), i run it, get the security warning and Run. the file extracts - then POOF, the installer is gone.
where did the files go? They aren't on the root of the C: drive, a folder/files were not created on my desktop, no files or folder created in my downloads folder.
I was never asked for a file save location.... ??? really? is this this basic stuff?
Where are the files? this $$$ printer is a brick until i get drivers!
Thanks!
Jason
UPDATE- I FOUND THE FILES!!
First of all, HP... i'm not impressed.
All the files for all the drivers are in a series of temp folders...
C:\Users\-myusername-\AppData\Local\Temp\3\7zS4A73
really?
hope this helps someone.

There is no change to this problem after 6 months since the last post. Put simply, and as stated in the previous posts, there is no way to scan a document and receive the image on your PC. If you are working with graphics for any length of time or want to create an image for inclusion as an image in a document or web page using this piece of equipment will not allow you to do so.
Great shame as every other function works well - it cannot be beyond the wit of HP to include a Windows application that enables you to scan an image, receive it in the software you are using at the time (e.g. Outlook, Word, Photoshop...) and use it in your work.
HP Printers several years older than this £1000+ Enterprise printer were able to do this simple job and have done so for a great many years. Just being able to use Microsoft's Fax and Scan would be start.

HT5312 I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? th

I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? then I was unable to enter until 8 hours then called Apple Japan 4 times each time threy asked me would you like to speak with an English speaker,I said yes then they told me sorry today is Sunday no English speakers ,but they refused to speak Japanese, then I called 5th time and a kind guy could speak English we were on 1and 1/2 hours he got me to log in but the reset key chain could not be completed still pending.
He said do not mess with that ! then I got a text from somewhere to reset 4 pins suddenly it was very strange I said to him that I got this pin this morning but it said you can use maximum 3 hours it had a UK number and I told him I do not like this and will not enter the code he said do not do it if it is from the UK and then I said to him ok you did a lot to help but we can not go any further ! and we cut of I went back to my computer to re do the ID but I found everything a mess so I call and a stupid sounding Japanese women with a squeaky voice came on I was calm at first and they want your phone number your IMEI number your iPhone serial number date of birth Address email address it takes 10 munutes to check then they ask what are you caling about so I try to explain my keychain is broken or problems with language security questions and can not change my pasword because the security question have failed me so it is ONE BIG HEADACHE AND I START I GET STRESSED she says Do want an ENGLISH speaker ,I say yes ,that guy i talked to earlier but I never got his name and first time I ever talked to him but they said he is not here so I said ok and then she said today is sunday so call back in the morning ,I said ,well ok in Japanese but they make you feel stupid because they do not want to speak Jap@anese with none natives and they are to busy,And they feel that I should not bother them ,then I say that Apple Japan is trying to refuse Apple foreign customers and then she wants to hang up and ask me to visit the shop ,but they are the same I have a very bad time with Apple Japan since they do not discuss software problems or security with customer meaning if you have a problem they ask you to come on a time 20 minutes max so they do hardware test and say you phone is fine then I say no I can not reset my ID they say you must call call centre so I am going around in circles ,When I call English it is usually Australia so if my problem is in Japan surely if do not want me to talk to them in Japanese and they ask me to call Australia but every time my call charge is expensive after asking them is this free because I have Apple care they say yes but when the call goes to Australia 0120 277 535 it might change to paid call so I call then I have to ask is this charging they say we can not give you that information ! so what can I do I have have been at the computer and phone all day on my day off work and in tre week I am so busy and can not use my phone I can not work without it ,this new technology for you ,they can not cope with the fact that the customer have problems yet they do not want to deal with us because they can not solve it and so it shows them to be useless they like to walk around in their cool tee shirts and retro shop but when it comes to functionality we are unwelcome they got the money so do not return because apple is perfect that nothing should go wrong .
But it does somehow my English security answers do not work on a Japanese Question especialy if I did not choose that question I set up the multiple choice In English and wrote the answers in English or Roman and set them langauge preferences in English, do you really think you can correctly write english name or word in Japanese they write a police patrol car pato caa パトカア　they do not have r and l .So it is my choice to make my security easy for me and as difficult for others to hack.But they also have patororoo choo meaning ' now patrolling ' so why they have pato caa patrol car and patoro patrol and have thousands of Chinese words kanji they can find patrol.
I am getting off the topic but I am at a loss to fix this problem when they hold the keys and i have all the info to verify my ID.

You have to enter the Apple ID and password. You are running into the Activation Lock
iCloud: Find My iPhone Activation Lock in iOS 7
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

How do I print a mirror image? Where did the old functionality go?

Within the last several months I was able to print a mirror image of my document to my HP DeskJet F4180 in high resolution. I don't know if it is the new HP drivers, or my new Snow Leopard OS but now I can' figure out how to do it again. I can grab a screen shot in and flip it in Preview but it ends up printing in low resolution.
I have printed mirror images in the past from my PDF applciations and I think from Office 2008 (PowerPoint). I find no documents saved on my hard drive that come up saved as a reverse image so I suspect that I was using a printer feature not an application feature to print mirror images.
Where did this functionality go?

Found it!
Use the check box marked Flip Image. Didn't is say mirror before?

Where did the Stream 7 drivers go?

The support page for downloading drivers for the HP Stream 7 tablet (any model) has disappeared from the HP website.
Navigating to the HP Stream 7 support page, Selecting "Software and Drivers", then "Go directly to software and drivers page", Operating System "Windows", then Version "Windows 8.1" (the only choices), then clicking the Update button, gives a message "No software or drivers are available for this product with the selected operating system. Please make a different selection, or visit the product homepage. " This happens using Firefox, IE 11, or Chrome.
These drivers have been missing for at least a few weeks, and multiple forum users have also had no luck finding them. Before that time the drivers seemed to come and go randomly, but they've stayed missing now for weeks. One dorum user has posted direct FTP links to the drivers, and they might be the latest version, but not really sure.
Where did the drivers go, HP?

This is for the 5701 as of a few days ago.
http://ftp.hp.com/pub/softpaq/sp69001-69500/sp69307.exe
http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70275.exe
http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70340.exe
http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70339.exe
http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70337.exe
http://ftp.hp.com/pub/softpaq/sp69001-69500/sp69308.exe
http://ftp.hp.com/pub/softpaq/sp69001-69500/sp69305.exe
http://ftp.hp.com/pub/softpaq/sp69001-69500/sp69309.exe

Where did my network go?

Similar Messages

Maybe you are looking for