Where did my project go??

Hi everyone,
I have been importing my videos from digital camcorder into iMovie '08 without any problems. With each tape it asks me 4 a project name and if I would like to continue from an old project or a new one. I always say new.
Anyway, I had an two one hour tapes that I wanted to transfer and make it to one project. I did the first tape and called it home movie 1. When I got to the second tape it asked if I wanted to continue or start a new project and I said continue. Spent the hour transferring and when I got to the project, what I had transferred from tape one was completely gone!!
I have no idea what happened. PLEASE if anyone can offer any suggestions I would be very grateful.
Thank you

Hi,
There haven't been any updates to Prelude since December. And those are never forced upgrades.
What was the location of your project? Did any volumes or driver letters move around?
Prelude doesn't have a delete function for projects or media. Most we do is remove a reference to a file from a project, but never delete the actual media.
Are you missing any other files? Have you run a disk utility to verify the integrity of your hard drive?
Happy to help, but not sure where to go here yet.
Regards,
Michael

Similar Messages

Eclipse question-where did my projects go?

hi,
i just upgraded to Eclipse 3.1. I set the workspace to the same folder as before, but when
I bring up the new program it does not detect any of my projects. Any advice for a man with
this type of problem? thanks

thanks for the reply. i have been working on this all
day
with a little bit of success, but i am still not
finished.
Is there any difference to eclipse between classes in
packages and not? I have a project called 'LOG' that
is
included in a certain other project, but NONE of the
classes in the latter project can see any of the
classes in
the LOG project. it is so frustrating since there
e seems to
be no rhyme or reason to it, other classes can see
the
LOG contents.
In 'project properties', you can add a 'dependent' project. That project's source, class and JAR files will then be included in the target project.
Also, i did notice one problem i had was that in
this new
release of eclipse they added a 'src' and 'bin'
folder to
each project folder, presumably to keep your class
and
java files seperate. I had to tell each project to
look in its
root directory for that stuff. Anyways, it works on
some but
not on all. Any other advice ?
For a web application, you source files should go in 'src' or 'source'. Your class files should go in WEB-INF/classes. I'm not sure what you mean by 'root'. You should have packages, unless your application is extremely small.
any advice is appreciated, i am at my wits end! thanksNever fear. IDE's are supposed to make things easier, not harder. You'll get the hang of it soon.
- Saish

My project was not saved and is now gone...where did it go?

Help
My project was not saved and is now gone...where did it go?

Check to see if Premiere autosaved your project. Open Premiere and start a new project.
File Menu > Project Settings > Scratch Disks
The last entry is 'Project Auto Saves'. See where this is pointing on your computer. If you are very lucky, Premiere may have autosaved your project from before and you'd be able to find it and open it that way.
Otherwise, you won't be able to recover a project that wasn't saved.

Hi all, my first time on. I shared my imovie project to Media Browser. Fine. Then after it downloaded it 'disappeared.' Where did it go? Having found it, how do I then share it with idvd? I am told the image quality will be much better this route.

Hi all, my first time on. I shared my imovie project to Media Browser. Fine. Then after it downloaded it 'disappeared.' Where did it go? Having found it, how do I then share it with idvd? I am told the image quality will be much better this route.

Hi
I do
• In iMovie - select a project
• Share to Media Browser and as Large (not HD or other res.)
• Close iMovie
• Open iDVD and select to start a New iDVD Project
• Import movie - from Media button - down to the right - and here from Movies
Yours Bengt W

Just installed ilife 11 and it deleted my movie project, where did it go

Just installed ilife 11 and it deleted my movie project from the old version, where did it go

Installing iMovie will not cause a project to be deleted, so it is probably there somewhere.
What version of iMovie did you have before? Is everything on your internal drive, or do you have external drives?

How to burn a video produced in iMovie in iDVD: with gratitude for the advice received I used the "professional quality" setting in iDVD for a video which in iMovie is 1h 20min long. however this also failled. where did I go wrong, please?

how to burn a video produced in iMovie in iDVD: with gratitude for the advice received I used the "professional quality" setting in iDVD for a video which in iMovie is 1h 20min long. however this also failled. where did I go wrong, please?
the message sked me to alter the quality of the DVD as the content was too large for the quality sellected.
PLEASE HELP again,
THANK YOU VERY MUCH
MIchael

Check the Advanced ➙ Project Information menu option to make sure the playing time of the entire project, movie plus menu is below the 120 minute limit.
OT

Where did my synced files go? I synced them on the tablet, now I want to get them on my PC

Where did my synced files go? I synced them on the tablet, now I want to get them on my PC
How do I access them?

Via Creative Cloud.
One caveat: If you want to work with PS Touch's native file format (which is PSDX), you'll have to have Photoshop CC (or CS) and the PSDX plug-in.
Another option would be to export any projects as the PSD file format and open those in Photoshop or Photoshop Elements. If you import these back into PS Touch, note that PSD files will be automatically flattened.

Where did Sleak.open() go?

Windows 7 SP1
Version: Mars Release (4.5.0)
Build id: 20150621-1200
Java Project
Java Build Path:
org.eclipse.swt.tools_3.104.0.v20150410-1225.jar
org.eclipse.swt.win32.win32.x86_64_3.104.0.v20150528-0211.jar
I can find no JavaDocs on "org.eclipse.swt.tools"
I get the following error.
"The method open() is undefined for the type Sleak"
Where did Sleak.open() go?
I did a google search and a forums seach but only found another Eclipse forum thread where the same question is not answered.
Is there another tool that replaces Sleak in e4AP?
Does this rise to the level of a bug?
Should I report it?
What project owns it if I were to report it as a bug? "Platform"?
There is no "SWT Development Tools" project in eclipse's Bugzilla.

Forgot to check if the bug was already entered. It was already in Bugzilla. After reading the comments on the bug report I realized how to get it working. Created this FAQ to help others.
https://wiki.eclipse.org/Eclipse4/RCP/FAQ#How_to_use_Sleak_in_e4AP

Where did Cap3 Menus go?

Have some Menus in a cap3 project .. when converted to cap4 I
have the really nice TOC that is now there..
the TOC is nice, but where did the enu go? Is that feature
still supported in Cap4? Also the "Info" button seems to have also
dissapeared.. thought some of the informaiton appears in the TOC.
-Charles

Hi Charles,
You are right, the Menus have been replaced by TOC.
Jayashree

HT4174 Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... Hwo do I get the vido to show in the viewer?

Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... How do I get the vido to show in the viewer?

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Where do deleted projects end up? PLEASE tell me that they are recoverable!

I just deleted an untitled project from Aperture 2.1 which contained 1700 duplicate images that another named project contained.
Deleting the untitled project ALSO deleted my named project along with ALL of my images, all of my edited images that I just spent a week editing. My named project is still in the contents of my Aperture library, but is empty except for two files - Album.implicitAlbum and Info.apfolder
Where do deleted projects end up? Someone please tell me that I am not screwed here.

I agree that backups are necessary, however there is a big difference in work flow between writers and photographers.
Writers (writing novels) usually aren't under as tight a deadline as photographers. I have to have my edited images uploaded to the wire service within a very short time after shooting them. Taking an hour or more to backup a 3TB Aperture library to a vault isn't an option until the images are edited and sent out whereas saving a text document takes no time. Maybe I need several smaller libraries but until Apple makes it easier to switch between libraries on the fly that is going to have to wait.
What I am trying to get an answer to is why this "untitled project", which was apparently created after my original titled project, (the images within were rated and edited just like the project I was working in), blew away my masters in the titled project when the untitled project was deleted. I didn't import them to the "untitled project". I didn't copy them to the "untitled project". I wasn't aware that the "untitled project" existed until I saw it and deleted it.
Additionally, where did the files go? They are not in the trash, there is no Aperture directory in the trash as has been the case in the past, and there is no sign of them anywhere.
Anyone?

Where did "BT Notifications" for smartwatch go???

I recently purchased the Otium Gear S smartwatch which requires a bluetooth notification app in order to use over half of its features. At the time I purchased the watch there was an app available for this called "BT Notifications" however now that the watch has arrived the app is gone. Where did it go? And when/if we'll it be back? ?
I have been an iphone guy for many years now and would life to stay that way... But Android has a similar app that works perfectly... Just saying.. Could be a deal breaker for me.
Please help!

Hello,
I apologize for the delay in responding to your message (I just saw it) and for the really lackluster responses you've received.
The Otium Mobile site has a owner's manual for the Gear S - it is a PDF. That PDF contains this link:
https://unibuying.blob.core.windows.net/apks/BTNotification_K6.apk
windows.net? Yup. I don't know why. Cheap bandwidth, I guess.
That APK is for Android devices and won't work on iOS devices - and, really, isn't needed for iOS. Be grateful, BTNotification digs its claws deep in to Android, and it wants access to everything! There is also a 2D barcode on the watch, as an app - QuickResponse. I don't know where that will take you, but it should be a link to the app. You'd have to have a QR code reader on your Android device to use that code.
Since that APK isn't signed by anyone, you'll have to turn off the protections Android has in place to prevent malware from running before you can install it. Don't worry, it will detect these protections and walk you through disabling them.
I did install the BTNotification app and paired it with one of my Android phones - that didn't enable all the features, like the remote camera and the BT Notifications app on the Gear S. Broken? Unfinished? That's kind of the impression I am getting.
The Gear S, when paired with OS X or iOS, works well enough to do things like control what music is playing, do file transfers, etc. I don't have an iPhone, so I can't tell you whether or not it will dial and take calls. I imagine it would, much like a BMW's iDrive. That the Gear S was able to reach in to my Mac and iPod and play music of BT, channeling the sound to the Gear S's speaker, was impressive.
I use a cut-down SIM inserted in the watch and it works perfectly. Granted, the on-screen keyboard is a bit small for texts. It's a pity the device won't pair with a BT keyboard.
Whether or not an iOS app can be written to take advantage of the Gear S is something I don't know just yet. I have a couple of other projects brewing, but I figure I'll get around to playing with it eventually. At least the device isn't ignored by iOS! That's a fantastic thing!
Now, if only we could get the PS4 BT controller to be recognized. Oh, how dreamy that would be...

Where did my finnalised movie go?

ive been working on this video for weeks and a LOT of time went into it.
when i was done i finnalised it and when i looked for it, i saw a file called imovie projects so i looked in it saw a thumbnail that looked like my video.
but when i clicked on it it took me to the imovie app, and in the app it doesnt have my project in it.
where is my project? it took so long to make im really upset that i cant find it.

Did you export (Share) your project at any time? Try remembering the last name you gave your video/project and go to the top right hand corner of your screen and search for it through "Spotlight"

Where did my Aperture files go?

Hello everyone,
About a month ago I saved my photos by creating a vault. Fine. Since then I have deleted some of those original photos and have added many others. Fine. Today, I realized I deleted some images that I needed that I know were in the vault. So, I decided to restore my library. I did this ONLy because in the warning pop up it says that the photos in my existing library will be PRESERVED but will not be merged with the restored images. Ok, fine too. So I did this and now the only files I see were the original ones that I first saved a month ago and EVERYTHING else is GONE. Where did they all go? I am about to cry because I think they might have been deleted, but why did the prompt tell me that my files will be preserved? I cant find them anywhere. Am I missing something or did I really screw up? I really appreciate your help. Im pretty new to this. Thank you in advance for your help. Cheers.

See if they are in the Library Package. Go to the Library Package in the Finder. It will be in the Pictures folder unless you chose a location other than the default.
control/right click the Package and choose show package contents. Once inside you'll find your Projects which are also Package files so you'll have to control/right click again to see the contents.
Maybe your pictures are there. It's very important that you don't move or rename anything inside the Library Package. Just find out if they are there for now.
DLS

HP LaserJet Enterprise 500 551dn - where did the drivers go?

I go to the download page to download the drivers for this 551dn. I download all windows 7, 8, 8.1, 2008, 2012, so that i can put them on my print server. I downloaded them from here..
<http>//h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5081348&lang=en&lang=en&cc=lamerica_n...
when i get the file, lets say for windows 7/64bit, i choose...
HP LaserJet Enterprise 500 color M551 Printer Series PCL6 Print Driver (no Installer) 61.130.04.12834
24 Sep 2014 21.3
I get the file downloaded (LJEnt-color-M551-Drv-no-installer_12297.exe), i run it, get the security warning and Run. the file extracts - then POOF, the installer is gone.
where did the files go? They aren't on the root of the C: drive, a folder/files were not created on my desktop, no files or folder created in my downloads folder.
I was never asked for a file save location.... ??? really? is this this basic stuff?
Where are the files? this $$$ printer is a brick until i get drivers!
Thanks!
Jason
UPDATE- I FOUND THE FILES!!
First of all, HP... i'm not impressed.
All the files for all the drivers are in a series of temp folders...
C:\Users\-myusername-\AppData\Local\Temp\3\7zS4A73
really?
hope this helps someone.

There is no change to this problem after 6 months since the last post. Put simply, and as stated in the previous posts, there is no way to scan a document and receive the image on your PC. If you are working with graphics for any length of time or want to create an image for inclusion as an image in a document or web page using this piece of equipment will not allow you to do so.
Great shame as every other function works well - it cannot be beyond the wit of HP to include a Windows application that enables you to scan an image, receive it in the software you are using at the time (e.g. Outlook, Word, Photoshop...) and use it in your work.
HP Printers several years older than this £1000+ Enterprise printer were able to do this simple job and have done so for a great many years. Just being able to use Microsoft's Fax and Scan would be start.

Where did my project go??

Similar Messages

Maybe you are looking for