Where did the "Guest Network" go?

Running 5.6 AirPort, no longer a tab to select.

That is not a valid setup. That is not router mode.. if you want TC to have guest network it must be in router mode.
When you do that, guest network will appear.

Similar Messages

  • Where is the "Guest Network" Setup?

    All,
    I picked up a new Airport Extreme (AE) from our local Apple store this afternoon. I have been wanting to move our Drobo to a shared USB port, as well as have the option for a "Guest Network". We have lots of Geek buddies and relatives over on the weekends and evenings and I have never liked giving them access to our wireless network, and all that has to offer.
    Out of the box, to completely setup (except for the guest network) including sharing the Drobo, Bridging to our FIOS Router, and re-configuring our primary wireless network took less than 20 minutes. (I was VERY impressed) And the network is really quick!
    With that said, I can not find anywhere to setup the guest network???? There is no tab, Icon or option under any of the settings in the Airport Utility.
    What am I missing here?
    Please help!

    With that said, I can not find anywhere to setup the guest network???? There is no tab, Icon or option under any of the settings in the Airport Utility.
    o AirPort Utility > Manual Setup > AirPort > Guest Network
    The AirPort Extreme Base Station (AEBS) must be configured to "Share a public IP address" for this tab to appear in the AirPort Utility.

  • Does or will the Airport Extreme be able to share the Guest network to a Ethernet port?

    Did not know if there was or possibly will be the ability to seperate ethernet ports to make a hardwired guest network?

    Sorry, not possible to extend the Guest Network using either wireless or Ethernet.
    You might want to let Apple know on any new features that you want to see.
    Apple - AirPort Extreme - Feedback

  • Cannot connect to the secure network but can to the guest network

    I have three computers in my home, all Apple. One is an iMac with 10.5 installed, another is a powerbook g4 17" with 10.5 installed and the third is an old titanium powerbook g4 15" with 10.4 installed. All of them have the newest versions of software.
    I just bought a new time capsule and that has the newest firmware upgrade installed. I set the time capsule up with a secure WPA Personal network and a guest network with no password. I can connect to the secure network on the iMac and the 17" powerbook but the titanium powerbook cannot even see the secure network or connect to it if I enter it and put in the correct password. However the titanium powerbook can see and connect to the guest network.
    Please help, I need to be able to print from the titanium powerbook to an ethernet printer connected to the time capsule.
    I've tried adding a wireless client with no password in airport utility thinking I could connect the titanium powerbook that way and that does not work either.

    Actually I have figured it out. I guess the titanium powerbooks cannot do WPA encryption, only WEP but I cannot choose WEP in the airport utility nor do I want to. I did find a work around though.
    In airport utility I went to the base station menu and clicked on "equivalent network password" and it shows the WPA password and then something called "WPA Pre-Shared Key". The key is a 64 character password but I tried it on the titanium powerbook and it worked!

  • Extending the guest network

    For some reason, the guest network from my Dual Band AirPort Extreme does not show up in the list of networks on my wireless N AirPort Express. The private network shows up. Can I not extend the guest network.
    To go one step further, I don't suppose the express could extend both the private and guest networks. You would probably need two for that right?

    I have a similar need. Two business customers want to make wireless access available over the entire area of their operation without letting users gain access to their internal network. As has been said by everyone on all the posts I've been on that we can surely extend the Main SSID network but not the guest. Bob Timmons has responded in other posts that this is not possible at this time and that it is not a feature enabled by APPLE. The only solution these customers have is to obtain another IP address from their provider and install a second router on that network. Not quite as elegant as Apple's Airport Extreme where you can monitor both networks from one login.

  • HP LaserJet Enterprise 500 551dn - where did the drivers go?

    I go to the download page to download the drivers for this 551dn.  I download all windows 7, 8, 8.1, 2008, 2012, so that i can put them on my print server.  I downloaded them from here..
    <http>//h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5081348&lang=en&lang=en&cc=lamerica_n...
    when i get the file, lets say for windows 7/64bit, i choose...
    HP LaserJet Enterprise 500 color M551 Printer Series PCL6 Print Driver (no Installer) 61.130.04.12834
    24 Sep 2014 21.3
    I get the file downloaded (LJEnt-color-M551-Drv-no-installer_12297.exe), i run it, get the security warning and Run.  the file extracts - then POOF, the installer is gone.
    where did the files go?  They aren't on the root of the C: drive, a folder/files were not created on my desktop, no files or folder created in my downloads folder.
    I was never asked for a file save location.... ???  really?   is this this basic stuff? 
    Where are the files?  this $$$ printer is a brick until i get drivers! 
    Thanks!
    Jason
    UPDATE- I FOUND THE FILES!!
    First of all, HP... i'm not impressed.
    All the files for all the drivers are in a series of temp folders...
    C:\Users\-myusername-\AppData\Local\Temp\3\7zS4A73
    really?
    hope this helps someone. 

    There is no change to this problem after 6 months since the last post. Put simply, and as stated in the previous posts, there is no way to scan a document and receive the image on your PC. If you are working with graphics for any length of time or want to create an image for inclusion as an image in a document or web page using this piece of equipment will not allow you to do so.
    Great shame as every other function works well - it cannot be beyond the wit of HP to include a Windows application that enables you to scan an image, receive it in the software you are using at the time (e.g. Outlook, Word, Photoshop...) and use it in your work.
    HP Printers several years older than this £1000+ Enterprise printer were able to do this simple job and have done so for a great many years. Just being able to use Microsoft's Fax and Scan would be start.

  • Where did the Stream 7 drivers go?

    The support page for downloading drivers for the HP Stream 7 tablet (any model) has disappeared from the HP website.
    Navigating to the HP Stream 7 support page, Selecting "Software and Drivers", then "Go directly to software and drivers page", Operating System "Windows", then Version "Windows 8.1" (the only choices), then clicking the Update button, gives a message "No software or drivers are available for this product with the selected operating system. Please make a different selection, or visit the product homepage. " This happens using Firefox, IE 11, or Chrome.
    These drivers have been missing for at least a few weeks, and multiple forum users have also had no luck finding them. Before that time the drivers seemed to come and go randomly, but they've stayed missing now for weeks.  One dorum user has posted direct FTP links to the drivers, and they might be the latest version, but not really sure.
    Where did the drivers go, HP?

    This is for the 5701 as of a few days ago.
    http://ftp.hp.com/pub/softpaq/sp69001-69500/sp6930​7.exe
    http://ftp.hp.com/pub/softpaq/sp70001-70500/sp7027​5.exe
    http://ftp.hp.com/pub/softpaq/sp70001-70500/sp7034​0.exe
    http://ftp.hp.com/pub/softpaq/sp70001-70500/sp7033​9.exe
    http://ftp.hp.com/pub/softpaq/sp70001-70500/sp7033​7.exe
    http://ftp.hp.com/pub/softpaq/sp69001-69500/sp6930​8.exe
    http://ftp.hp.com/pub/softpaq/sp69001-69500/sp6930​5.exe
    http://ftp.hp.com/pub/softpaq/sp69001-69500/sp6930​9.exe

  • How can I delete the guest network from my airport. It was fine until the last update. It says my whole name's guest network which I do not want everyone seeing. There is no guest network setting in my airport utility.

    How can I delete the guest network from my airport. It was not showing up until I recently upgraded the airport. It now says my name's guest network and I don't like my name showing on the available network list! I am using a Verizon wireless modem with the wireless feature off.

    Open AirPort Utility, go to the Wireless tab and remove the check from the guest network check box.

  • How to get rid of the guest network on E1000

    Is there a way to get rid of the guest network on a E1000 or is it part of the setup.

    Hello Burns1214 ,
    I posted an answer here http://homecommunity.cisco.com/t5/Wireless-Routers/Enable-quot-Guest-Access-quot-on-E1000-Router/m-p.... You can only disable it thru Cisco Connect software.

  • My new iphone4 connected to the internet fine at the store today, but will not connect to my wifi at home - it sees the guest network, but does not give me a place to enter the password

    I just got a new iphone 4 (my first one) and the internet worked great at the store, as well as in the parking lot at the grocery store on the way home - yes I was playing with it!  Anyway, now that I'm home and the store is closed, it won't connect to my home wifi.  It sees the guest network, but it doesn't give me place to put in the password, so I'm not sure if that's why it won't work.  Also, I don't know what settings to put in for the screen that comes after the network choice screen - it has IP Addresses with DHCP, BootP, and Statis (I don't know what any of these are or mean!)  It also has a 'renew lease' button that I have no idea what to do with, and it has a section with HTTP proxy that is highlighted "off" but also has 'manual' and 'auto' options - maybe these are not set correctly?
    Very frustrating that there is no manual, and the website doesn't really help with this at all.  Thanks so much!

    If you look at the top left of your screen you will either see a 3G (or 4G if you have AT&T) or you will see the wi-fi symbol.  If you don't see the wi-fi symbol you are connecting to Gmail through your cellular data plan, not via wi-fi.
    To answer your question, it doesn't happen often but when it does the steps I mentioned above will normally resolve it.  Hopefully you won't have any further problem with this.

  • Where did the Discussions for Shake go?

    Sorry to be a bother but where did the discussions group for Shake go?  Is there still a group for Shake?  I am having a very hard time with Shake right now and really need some help.  Thanks for anything anyone can help with.

    Click here.
    (58966)

  • Where did the "Questions onWP8" Topic go?

    Where did the topic go?
    Used to be here.. http://discussions.nokia.com/t5/Nokia-Lumia/Questions-on-Windows-Phone-8/td-p/1593176

    I think it is being looked at to be sure it is working on the board correctly.

  • Where did the Secure Site Icon go ?

    I know the status bar was removed and an and on bar replaces it but
    Where did the Secure Site Icon go ? Will not use FF without it !
    I cant find anything about it. ( FF 40b7 ) How do I get it back ?
    Not so little things like this will hurt FF. And YES I understand this is beta but come on guys/gals this is IMPORTANT !
    I probably just missed something stupid but I could use some help please.

    Every financial institution (bank, credit union,...), every news outlet (print/TV/Radio/blog) reaches out to millions of elderdly folks and other non-geeks and tells them to run away as soon as they dont see a Key or Lock on a secured page (or maybe so-called secured page from what I get you are trying to push through).
    This is a major Change Management disaster waiting to happen... Not just for Firefox but for every web site using secure transactions. Countless organisations are going to get calls from users telling them, "Your site is not secured, Oprah and CNN told me so".
    Go for color scheme or other visual indicator to warn of security level, but absolutely dont lose the icon !
    Regards,
    Stephane

  • Where did the analogue in feature go?

    Where did the analogue in feature go?
    None of the HD cameras I have searched for have a analogue input. In fact, I have found only one MD camera that has that capability.
    http://www.sonystyle.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=1055 1&storeId=10151&langId=-1&productId=11038809

    Hello! I said... I want the ability to input analogue video into my camcorder so I can continue to transfer VHS and input and record video from other sources. The new HD cameras on the market will not allow you to record video from any source except for the lens.
    I have HD cable box. I want to record my HD programs from cable (HBO, Starz, etc) to my camera, download the video to my Mac from the camera and then edit them in iMovie and create professional looking movie DVD's in iMovie.
    iMovie HD can work with mini DV HD cameras and HD video. I was not aware of a system requirement for working with HD content.

  • How to setup the guest network just access internet only (not touch in internal server)

    I had setup the AirPort Extreme in basic and guest network, but observed the guest can access to our server currently, for the security issue, we can setup the guest network to access internet only? pleae advice and thanks

    By default, a properly configured Guest network on the AirPort Extreme only allows network clients to access the Internet. No access to the "main" network's resources should be available.
    This is assuming that the AirPort Extreme is the only or "main" router in your current network configuration.

Maybe you are looking for

  • Error while running the financial report in the workspace.

    Hi, Im getting the below error while running the financial report in the workspace in HTML mode. *"Required application module reporting.HRRunDlg is not configured. Please contact your administrator".* And im not able to login to the Hyperion Financi

  • Error in sender file adapter: source directory does not exist

    Hi, The PI system is 7.11 I've created sender file adapter with following details: Transport Protocol : File System Source directory: /interfaces/In I checked in AL11 that this path really exists and it does. (I can even see the .txt file that should

  • Drop down menu in IE moves to the right

    I am using the SPRY in a menu for a client and in IE the drop down elements show to the right.  When I view them in any other browser the are fine.  I made all changes to the SPRY CSS in a separate CSS file.  I have commented out the additional CSS f

  • Transforming values in XSLT

    Hi, I needed some help with XSLT. I have a table which is returning me values in the following way 1,2,3,4,5,6 and I am suppose to put it in my element in the following way <root> <e1>1</e1> <e1>2</e1> <e1>3</e1> <e1>4</e1> <e1>5</e1> <e1>6</e1> </ro

  • Use of Surrogate Key

    In designing table, is it always safe to use surrogate key, say an NUMBER(38) type, generated by a sequence - even a naturally occuring candidate key does exist e.g. student_id? What are the considerations when choosing the PK column(s)?