Where did the plug-ins go??

Hi all,
Need a bit of help locating plugins that seem to have just vanished. for example when I click on a pre-set in space design it asks me to locate it? What does this mean? any thoughts? Its happening with other plug ins as well. shall i reindex? reinstall?

It's probably asking you to locate the impulse response file.
All Space Designer patches require two things - the plugin preset file (essentially the status of all the front panel controls) and the impulse response file, which is what actually generates the convolution reverb.
Read the Space Designer manual for more details.
Make sure you have the impulses responses installed and placed at the default system locations so Logic can find them.

Similar Messages

  • CS4 upgrade to CS6 Where did my plug ins go?

    CS4 upgrade to CS6: where did my plug ins go?

    where did my plug ins go?
    Nowhere. They are still happily in your (former) PS CS4 plug-in directory. There is no such thing as automatic migration. You need to obtain the proper CS6 versions from the vndors (possibly at extra cost) and install those.
    Mylenium

  • Where do the plug-ins live?

    Ok so i just installed Logic Pro Content. Have all the awsome sounds but the plug-ins are missing. I have songs i did a while back that need compressor and other plug-ins but none are there. They just have a line though it.
    Now i have soundtrack Pro with all the same plug-ins.
    So what is wrong and where do the plug-ins live in the mac.
    Have installed the program more then once

    Usually when lines are through the plug-ins like that, core audio has not been activated.
    Go to Audio Hardware & Drivers, and first make sure to enable the core audio driver, then select your audio interface.
    See if that does it...

  • Where did my plug ins go!?

    I'm in the process of several upgrades. New Macbook Pro and then Yosemite. Everything was fine so far (PLAY worked fine), then I added some new sounds to my East/West SOL PLAY plug in folder and now PLAY has disappeared from my Audio Units drop down menu for the plug ins. It is still in my Audio Units Manager, selected and successfully verified, but not an option to use as a plug in. When I bring up PLAY on its own it works with that keyboard, but it's not outputting to Logic. I have not upgraded to Logic X yet. That's next, but I'm still on 9 until I get this solved.
    Any ideas on what went wrong?
    Thank you in advance -Thomas

    Hi, Thmann.
    Try deselecting the PLAY plugin inside the audio units manager and rescanning it.
    Another question. Did the East/West installer of the new sounds also install PLAY? If so, it might be an older version included with the library samples. Make sure you have the latest version from the EW site.
    regards, Scorpii

  • Where is the plug-ins folder for the contact sheet plug in! Mac

    I'm trying to download contact sheet!  I don't know exactly how to get to the plug ins folder.

    Your HD > Applications > Adobe Photoshop CSX > Plug-ins

  • Where have all the plug-ins gone?

    I re-installed InDesign CS3 after my hard drive was wiped clean with the re-installation of Windows XP, and I'm finding that some files won't open.  The error messages state that some plug-ins are missing and that the program and/or  the plug-ins should be updated.  I have run the update for InDesign, but this hasn't helped.  I don't know of any separate updates for plug-ins.  Any suggestions?

    1. Did you use any non-Adobe plugins in your previous installation? If you (or someone else) installed 3rd party plugins, you need to reinstall these as well. (I wouldn't know what "must have" 3rd party plugins there are -- the iTunes player for CS3? Tetris-in-a-panel?)
    2. Are you sure you are trying to open CS3 files? Trying to open a CS4 or CS5 file will give the same "helpful error message".

  • Where are all the plug-ins?

    Hi
    There seem to be quite a few very experienced InDesign SDK programmers that hang around the forum.  Which leads me to my question, where are all the plug-ins you guys have been creating. Looking around, there only seems to be about 50 commercially available plug-ins, so where are the rest of them. Do companies hire programmers for in-house plug-ins is that not overkill.
    Besides all this, I understand that nobody (including myself) would want to give away secrets about what type of project they are involved in currently, but maybe some of the guys here could tell us who they worked for in the past, how long involved with InDesign SDK, and what type of plug-in they've created.
    I realize in this forum, its basically professionals and not just hobbyists, making it harder sometimes to get replies, but maybe some of you will share a little something in this faceless screen-named  avatar world.
    Steven
    P.S. self-employed creator of idrtl plugin @ http://idrtl.scriptui.com

    Hi Steven
    Many plug-ins are distributed as a part of bigger systems, i.e. CMS.  Maybe thats why you've heard only about 50 commercial plugins.
    Regards
    Bartek

  • Where Can I Find the Plug-Ins?

    Hi, I'm trying to migrate a ms access database to oracle,,,where should I find the plug-ins needed by the omwb so I can start?
    Thanks!

    ok,,,,I found it,,,,never mind....thanks!

  • Upgraded to iLife '08. Where do I put the plug-ins to iMovie?

    I invested in several plug-ins to previous iMovie (Slick Volume 1-8, eZedia, etc) They're residing in user/Library/iMovie/.
    Now I upgraded to '08 but can't find a way to import the plug-ins which makes all projects (8 right now) and about 3 months night work go out the drain.
    Or are they not even compatible???????

    Hej Bengt,
    Tack för hjälpen. I still have iMovie 6.0.4 (thank God, the installation of iLife'08 backed it up for me) so I'm really not in the predicament I hinted about in my quesion above.
    I know I should have checked this up earlier. But it's still extremely annoying when a software manufacturer doesn't bother to highlight an issue like this during installation of updates and upgrades since the user rarely think about it (too excited about new software) and since plug-ins more often than not actually work even after installation of the new software...
    Ah well.... I suppose this is stuff one has to live with. Thanks for info anyway.

  • Where else are Plug ins stored and throwing things away

    Hello All,
    Last year I had purchase Dot Pixels and i installed it in the Applications>AE>Plugins folder.  I got an email to upgrade to the lates version.  It warned to remove the old version before installing the new one, which I did.  However, with the new version the computer did the installation.  Unfortunately, its not working properly, its showing up as a trial version, so I would like to remove it, but its not in the Plug ins folder like the old one was, and when I "Search" for it nothing shows up.  When I type in Dot Pixel in the Effects and  Preset panel, its located in a folder named RowByte.
    Where is it located so that I can trash it.
    Since I cleaning tihs out and I love throwing away things to reclaim disk space, I noticed  in my HD>Library>Application Support folder a Final Cut Pro and a Final Cut Pro System Support folder, I dont use Final Cut, don't intend to use Final Cut and I don't know where or how Final Cut got to be anywhere on my machine, is it ok that I trash them and any other applications that I do not use and have folders in there.?
    Thank You in Advance
    on a Mac os 10.6.8  using AE from the CS4 suite

    There are plug-ins that get installed in the Library>Application Support> Adobe> Common> Plug-ins folder.
    I wouldn't mess with the Final Cut folders. They contain things like apple codecs for ProRez and Apple Intrmediate. They are good for you....

  • My iphone says I have 331 songs but only 139 can be played...where did the others go? How to get them back?

    The songs disappeared from two computers and are grayed in on my iphone...I cannot play 192 songs...how to get them back or how to delete them from my phone so I can start over?  I do not want icloud...I synced my phone to the computer and everything was fine for awhile...where did the songs go?

    Because it says it's incompatible when it can't be, I got hope. I get error messages all the time with my iPod and iPhone that it cannot sync and that 'this device is not capapble of connecting to iTunes' stuff. I literally forget that happened, plug it in again and it works, I later realize that iTunes made a mistake, they do that.

  • Where is the plug in tab option in the upper menu bar when acrobat pro is installed on a mac

    where is the plug in tab option in the upper menu bar when acrobat pro is installed on a mac

    When Acrobat is installed first, it does not have a Plug-ins menu. When you buy extra plug-ins for Acrobat, some plug-ins will add a Plug-ins menu. Some won't - some will add other menus, or buttons, or something else.
    So
    1. Make sure you have purchased the Mac plug-in(s) you need.
    2. Make sure they are installed.
    3. Make sure they are compatible with your version of Acrobat; the Mac is much less forgiving about versions, you need to check carefully.
    4. If the plug-in is compatible and installed perhaps it doesn't add a plug-ins menu.

  • Can't get the plug-ins I download to work

    Can someone help me any of the plug-ins I download for imovie are not in their.

    the plug-ins aren't working and I have tried again several hundred times and I have searched for the right folders, but no matter where a put them they don't work. So if someone could just go over what you have to do exactly to download a plug-in to make it work with imovie it would be much appreciated thanks to anyone who helps me out.
    Message was edited by: diezal76

  • HP LaserJet Enterprise 500 551dn - where did the drivers go?

    I go to the download page to download the drivers for this 551dn.  I download all windows 7, 8, 8.1, 2008, 2012, so that i can put them on my print server.  I downloaded them from here..
    <http>//h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5081348&lang=en&lang=en&cc=lamerica_n...
    when i get the file, lets say for windows 7/64bit, i choose...
    HP LaserJet Enterprise 500 color M551 Printer Series PCL6 Print Driver (no Installer) 61.130.04.12834
    24 Sep 2014 21.3
    I get the file downloaded (LJEnt-color-M551-Drv-no-installer_12297.exe), i run it, get the security warning and Run.  the file extracts - then POOF, the installer is gone.
    where did the files go?  They aren't on the root of the C: drive, a folder/files were not created on my desktop, no files or folder created in my downloads folder.
    I was never asked for a file save location.... ???  really?   is this this basic stuff? 
    Where are the files?  this $$$ printer is a brick until i get drivers! 
    Thanks!
    Jason
    UPDATE- I FOUND THE FILES!!
    First of all, HP... i'm not impressed.
    All the files for all the drivers are in a series of temp folders...
    C:\Users\-myusername-\AppData\Local\Temp\3\7zS4A73
    really?
    hope this helps someone. 

    There is no change to this problem after 6 months since the last post. Put simply, and as stated in the previous posts, there is no way to scan a document and receive the image on your PC. If you are working with graphics for any length of time or want to create an image for inclusion as an image in a document or web page using this piece of equipment will not allow you to do so.
    Great shame as every other function works well - it cannot be beyond the wit of HP to include a Windows application that enables you to scan an image, receive it in the software you are using at the time (e.g. Outlook, Word, Photoshop...) and use it in your work.
    HP Printers several years older than this £1000+ Enterprise printer were able to do this simple job and have done so for a great many years. Just being able to use Microsoft's Fax and Scan would be start.

  • Where did the Stream 7 drivers go?

    The support page for downloading drivers for the HP Stream 7 tablet (any model) has disappeared from the HP website.
    Navigating to the HP Stream 7 support page, Selecting "Software and Drivers", then "Go directly to software and drivers page", Operating System "Windows", then Version "Windows 8.1" (the only choices), then clicking the Update button, gives a message "No software or drivers are available for this product with the selected operating system. Please make a different selection, or visit the product homepage. " This happens using Firefox, IE 11, or Chrome.
    These drivers have been missing for at least a few weeks, and multiple forum users have also had no luck finding them. Before that time the drivers seemed to come and go randomly, but they've stayed missing now for weeks.  One dorum user has posted direct FTP links to the drivers, and they might be the latest version, but not really sure.
    Where did the drivers go, HP?

    This is for the 5701 as of a few days ago.
    http://ftp.hp.com/pub/softpaq/sp69001-69500/sp6930​7.exe
    http://ftp.hp.com/pub/softpaq/sp70001-70500/sp7027​5.exe
    http://ftp.hp.com/pub/softpaq/sp70001-70500/sp7034​0.exe
    http://ftp.hp.com/pub/softpaq/sp70001-70500/sp7033​9.exe
    http://ftp.hp.com/pub/softpaq/sp70001-70500/sp7033​7.exe
    http://ftp.hp.com/pub/softpaq/sp69001-69500/sp6930​8.exe
    http://ftp.hp.com/pub/softpaq/sp69001-69500/sp6930​5.exe
    http://ftp.hp.com/pub/softpaq/sp69001-69500/sp6930​9.exe

Maybe you are looking for

  • Running total across 2 grouping

    Hi All I have created a crystal report and i have 2 remaining issues that i just cant get around. the report is basically about all the net stock position. the report is based on a query..that links sales order to all target documents that originate

  • Linking separate desktop and mobile sites [subject edited by moderator]

    I created a regular site in dreamweaver and then I made a mobile version usingjquery mobile, how do I link the two together so when someone search fro the site on a desktop the regular site will show and when someone searches for it on a mobile devic

  • Mass user address data req

    Dear All, How can we get mass user address data such as SAP ID,Full name,E-mail ID,Building code,Contact details in one single report or from any Table? Sytem is ECC 6.0 Regards, Mahesh

  • Print to a DVD disck Help

    Please help, After I finish the artwork I am trying to print to a DVD disk from the illustrator. The printer Epson stylus photo R300 For some reason I cant figure out how to setup, I been damage 5 disks already, it print out of the center of the DVD

  • Change SU proposed by the system in the TO confirmation.

    Hi gurus... I have the following problem.Scenario: I am doing the picking in two steps, I have activated the SUs management in the intermediate warehouse type of the picking in two steps. Issue: When I create the TO, the system assigns a destination