Where do I download drivers for airport extreme.....my iPad can not be set up by he current software

where do I download drivers for airport extreme.....my iPad can not be set up by he current software

I have an airport extreme with updated software(latest) and I setup an Ipad 3 on it with ios6(wirelessly). You can access the airport to update it with the utitlity app on an ios device, mac, or pc. I dont think it has anything to do with the airport software. Did you try rebooting the airport, then trying again?
Like james said, maybe more detail would help someone help you.

Similar Messages

HT1430 Since downloading updates for ios 6.0.1 can not send or receive mail on iPhone and iPad

Since downloading updates for ios 6.0.1 can not send or receive mail on iPhone and iPad

Is this on wifi or cellular data?
Have you tried a reset? Hold down the home/power button until you see the apple logo and then release, then wait for the phone to boot back up.
Have you gone into the email settings and making sure the password are still there?

Airport Extreme 2nd Gen - can not retrieve or assign an IP address

I had two 2nd gen Airport Extreme base stations. One connects to the internet, the other bridges the network to my office where I have wired devices connected. The office base station was no longer allowing me to connect to my USB drive for time machine backups, but all of the wired devices were routing to the internet properly.
I purchased a new base station (5th gen), bringing my total to three extreme stations and two express base stations (one express for an old wired network printer, the other for streaming music).
The old main base station is moved into the office, and the new base station (5th gen) becomes the "main" internet access point. I reset both devices and they install without a hiccup. Ditto the new express stations - they connect without having to reset them. Everything works as it did before the upgrade.
I take the old office base station (the one that would not allow me to backup via time machine) and do a factory reset. It reboots, the light flashes yellow (not surprising). I hook an old macbook (10.6.8) up to the old base station (and turned off the wifi) using a wired ethernet cable the ethernet port is assigned an IP address (10.0.1.2) via DHCP. My other macbook pro (10.8.5) running the latest AirPort Utility sees the old base station using wifi (under other wifi network). I select the old base station it automatically connects it to my new base station stating:
"This Airport Extreme will now be set up to extend <my new 5th gen AirPort Extreme base station>"
I change the default name and click next.
Now when the old office base station boots it will not connect to the network - it still flashes yellow. It will not assign itself an IP address, the macbook plugged into the ethernet port (using dhcp) shows (under network settings):
"Ethernet has a self-assigned IP address and will not be able to connect to the internet."
(the 169.... number)
Now the funky part. I manually set the wired ethernet's IP4 configuration (IP, subnet, router and dns server) on the old Macbook running snow leapord (10.6.8) - remember the wifi is turned off - and bingo - I am connected to the internet. All the while my old AirPort Exreme continues to blink yellow. If I manually assign an IP address to the AirPort Exreme's light turns green.
Clearly the old device is working. The ethernet port works, the wifi works - routing traffic from the wired ethernet through my home network and out to the internet. My AirPort utility on all my macs can see the base station, and can configure it (via wifi). I have even tried (via wifi) downgrading the firmware to 7.6.3 and then to 7.6.0 and the back up to 7.6.4. The only thing it will not do is give retrieve an IP address, or assign an IP address to wired devices.
Any ideas?

I attempted to see/access (via the Disk Utility on my iMac) two drives already connected to my AirPort Extreme, but could not.
These drives are shared "network" drives, which Disk Utility cannot access. Disk Utility will only be able to access a drive if it is connected directly to a Mac.
If you need to format the drive(s), partition them, etc., you must do so with the drive connected directly to the Mac, then move them to the USB powered hub location at the AirPort Extreme.
These drives are available through the Finder and are used for Time Machine
Apple does not officially support Time Machine backups to a drive connected to the AirPort Extreme, but some users seem to be able to make this work.
1) Can I see/access USB drives (properly fomatted and visible/accessible in the Finder window) attached to my AirPort Extreme (2nd gen-firmware version 7.6.2)via a powered USB hub?
Probably. Some users find that one powered hub will work for them while another might not. To "see" the drives, you must first click on the AirPort Extreme icon under the SHARED heading in the Finder. Then, if the drives are formatted in Mac OS Extended (Journaled), each drive will appear as a folder. Double click the folder name to mount the drive on the desktop.
2) Can I use my iMac (running Lion 10.7.4) to create a concatenated disk set with USB drives (of varying size) attached to my AirPort Extreme via a powered USB hub?
The drives will all appear as separate drives, which must be accessed separately. If you were thinking of trying to start Time Machine backups on one drive and have them continue automatically on another drive when the first drive is full, that will not work.

Download app for epson printer and still can not print

Please help me connect to my epson stylus 510 printer. My wifi is connected to it already.

Better contact Epson support.

In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

In my macbookpro airport showing as uninstalled. How do I install and will belkin wireless USB adaptor support in macbokpro software version 10.6.8. Where do I download driver for the same

jeanfromisle-arné wrote:
I'm new to MacBook Pro.
My system is Mac OS X v.10.6.8.
I used to work on my 3000 photos with GIMP on a P.C, but since I had a breakdown, I would like to carry on on my Mac as soon as possible.
Figuring out unaided a new OS after a breakdown is the best prescription for another breakdown.
Before going back to editing your photos, I suggest you need to familiarise yourself with your new OS. Get a book (eg, David Pogue's "Missing Manual…") -- now, that Lion's been out and about for some time, you can probably get the Snow Leopard (aka Mac OS X v10.6) edition at a discount. Take the time to read it and understand it, and you'll spare yourself a mountain of frustration. There are enough similarities between Mac OS X and Windows to fool you into believing almost everything works the same way, when, of course, it doesn't -- many similarities are only skin-deep.
Once you've done that, you'll be in a better position to install and use GIMP or look for alternatives.
where do I find the exact version (in french)
For French issues, you are probably better off checking the forums on MacBidouille or MacGeneration.

How could i download drivers for imac mc814 for windows 7 ? and from where ?

how could i download drivers for imac mc814 for windows 7 ? and from where ?

If you are trying to run MS Windows in Boot Camp then please post in the correct forum, the Boot Camp forum. That is where the Windows guys hang out.

Where are the epson drivers for Mavericks for the artisan 835

Where are the epson drivers for Mavericks for the artisan 835

OMT8 wrote:
Well, I have this printer too, and I get the following response from the System Prefs Printers and Scanners when I select to add this printer:
"The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software."
When you go to the Epson website for this particular printer it says:
"The latest drivers for this product are available only via Apple's Software Update."
And finally, when you go to Software Update it says: "No updates available"
I second OMT8.
Yes, the driver file at http://support.apple.com/kb/DL1398 allowed me to finally install my printer, but does Apple have _any idea_ how long it takes to download a 1.08GB file over a 1.5mbps DSL connection?
Never mind how much of my pricey new SSD is being consumed by the resulting 1.80GB of driver files all for _one_ printer driver that should maybe occupy 200K?
Or that the primary article on OS X printer drivers (http://support.apple.com/kb/HT3669) -- which does indicate that the Artisan 830 is supported -- does not mention or link to the driver file that's needed to make it work?
Or what a complete violation of Apple's "it just works" gestalt it is to be confronted with the above Catch-22 and to have to search the web and then go through all of the above to make a new laptop talk to a two-year-old printer?
Yes, my printer now works, and yes, Apple's Support Communities were instrumental in getting to this point. But spending all morning (plus download time) getting a printer driver installed tastes way too much like I paid for Apple and got Microsquish.
-carl-

Are there updates available for Airport Extreme? If there are, will I be notified of an available update?

Are there updates available for Airport Extreme? If so, will I be notified or should I check from time to time for any updates?

Back up your data, check your applications for compatibility, and download Mavericks from the Mac App Store.
(108187)

Downloaded drivers for the MS6570 do not WORK - HELP!

Hello,
I have a fresh install of Windows XP on the MS6570. I've also downloaded the drivers for the mother board from: http://www.msi.com.tw/program/support/dr...pt_dvr_list.php
and from:
http://ftp://download.nvidia.com/Windows/nForce/5.10/nForce_5.10_WinXP2K_WHQL_english.exe
Unfortunitly, everytime I run the setup program from the downloads, it begin the install process but than immediatly turns off the install, never beginning and finishing the install process. No error messages or anything. I've also just installed SP1 for Win XP from a CD I have thinking this may needed to be installed first, but still had no luck. I truely am thinking the driver downloads for the ms6570 are bad.
Does anyone know of a way that MSI can put working drivers for the ms6570 so they can be downloaded or does anyone know of another site or can provid an FTP to working drivers?? I'm extremely desperate.
I appreciate any info.

I appreciate everyone's reply....
Here is what I have done.
I have installed a NIC on my PC, because my on board ethernet will not detect under Windows. I've also went and downloaded SP2 from Microsoft and installed that with all other critical updates. I downloaded the latest version of direct x 9.0c, and the the ms6570 diver's setup to run under win 2000.
Still the results are the same as described above. The driver software downloaded will not run the complete install process. I've than tried to get Windows to detect and update any hardware drives that it can find from the internet and the only driver it found was for the sound card which now works.
I appear to be with the same problem as originally described, and still feel that the drivers may be corrupted that are offered for download. Again.. I'd be happy to pay for a copy if anyone would be willing to burn me an original driver CD. I know the original driver CD does work as this is what I loaded the drivers for my motherboard in the past with.
Thanks for any help again.

After downloading firmware for airport utility, airport express base station no longer registers with airport utility on my Mac. Now the base station is blinking amber with no info of what is causing all this to happen. Any suggestions?

After downloading firmware for airport utility last night, airport express base station was deleted from airport utility and only Time Capsule remains. When I plug in the base station, an amber light blinks without being able to verify the cause. Any suggestions to remedy this problem?

There are only a couple of things you can do to resuscitate a nonresponsive Express:
"Hard reset":
Press and hold the reset button with a pen or pencil until you see the status light (LED) start to flash amber rapidly, which should occur after about five seconds.
If that does not work,
"Factory defaults reset":
Unplug the Express from power.
Press and hold the reset button with a pen or pencil, then plug the Express back in while continuing to hold the button until you see the light (LED) flash rapidly. This should happen after a few seconds.
Release the button.
In either case you will have to reconfigure the Express as a new device. A moment or two after it has been reset, the LED should be blinking slowly. It must then appear in your Wi-Fi menu like this:
Earlier versions of OS X will report it as "Apple Network nnnnnn".
In either case, select it, and then launch AirPort Utility.
If it does no appear in your Wi-Fi menu after it has been reset using one of the two techniques above, it is defective. Other than attempting another reset, there is nothing you can do.

Cannot download drivers for the HP office jet 4635

I cannot find and download drivers for my MAC. On verious support pages for downloading drivers, I enter the procuct name "HP officejet 4635" and enter and only blank pages come up and I cannot continue. It's a new printer and I am about to return it and buy another brand.
I was able to install it for my Windows machine, but most of the use will be on the MAC.

Hi,
Download and install the software below:
http://ftp.hp.com/pub/softlib/software12/COL49513/mp-120051-4/HP-Officejet-4630-series_v12.30.0.dmg
Be sure to select HP Scan while installing to get full functionality.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Download drivers for another pc, but firefox will only install them

I am trying to download drivers for a new (used) pc I obtained. When I try to download the proper driver, The only option available to me is to install. There is no question of do I want to save, only to install. Is there a setting to overcome this?

Hi bussoboy,
Adding to sarbin's instructions, you should probably run the Windows 7 Upgrade Advisor from MS . That will show you what is compatible and what is not.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Where is the download link for photoshop extended cs5 for mac?

where is the download link for photoshop extended cs5 for mac?

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Where is the download link for adobe 9 standard

where is the download link for adobe 9 standard?@

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Where i find the drivers for hp j5783 scaner

where i find the drivers for hp j5783 scaner

Hello ezraie, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are looking for the drivers. I would like to help.
I would recommend following this link to the HP Officejet J5783 All-in-One Printer Drivers.
Please let me know if you have any questions. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Where do I download drivers for airport extreme.....my iPad can not be set up by he current software

Similar Messages

Maybe you are looking for