Where do I find my dvd when plugged into my Macbook Air(Lion)?

It should just show up on the Desktop or in the side panel. If not check under Finder preferences, General and check the Show these items… CD's DVD's etc.

Similar Messages

My iPhone won't stop vibrating when plugged into my Macbook. All software is up to date. iTunes just gives me an error. No problems when plugged into a PC. Why the nonstop vibrating!?

My iPhone won't stop vibrating when plugged into my Macbook. All software is up to date. iTunes just gives me an error. No problems when plugged into a PC. Why the nonstop vibrating!?

When I connect it to my iMac (with up-to-date OS X Yosemite 10.9.5) - it doesn't work.
Specifically - iTunes automatically launches, but then quickly shows a dialog window that says, "iTunes could not connect to the iPhone. This device is no longer connected."
Meanwhile - on my iPhone - in the upper right-hand corner (where the battery life is displayed) - you can see the "plugged in" icon (lightening bolt) rapidly blinking on and off.
In other words - it seems like, when it's plugged in - it's rapidly connecting and disconnecting (several times per second).
If I click "OK" on that dialog window on iTunes - it instantly pops back up, and continues to do so as long as I keep the iPhone plugged in.
I have tried all and stile did not resolve my problem. I tried to restart both devices, try different cable (I have original cable). Both devices are new and software's are update it on latest versions.
Thanks in advance for any help!

Where can I find a pdf writer for my new macbook air?

Where can I find a pdf writer for my new macbook air?

If you'd like to create a PDF from something rather than print, you can create a pdf from any print dialog.
ie. File > Print > click PDF button lower left > Save as PDF..

My thunderbolt display makes a noise when plugged into my macbook pro laptop

my thunderbolt display makes a noise when plugged into my macbook pro laptop. It sounds like an electronic noise which doesn't come through the speakers. Any advice how to eliminate this?

Could be a poor ground. Try plugging the monitor directly into the wall (no power strip) and see what happens.

I need a wireless mic that can be plugged into my MacBook Air. What do you recommmend

I am looking for a wireless microphone that can be used for a meeting. I already have speaker however I am looking for a wireless mic that can be plugged into the MacBook Air (which I purchased last year). Nothing fancy, just something inexpensive and easy to use...

Must be wireless?
http://www.amazon.com/GTD-Audio-G-622H-Professional-microphone/dp/B004443DZ2/ref =sr_1_1?s=electronics&ie=UTF8&qid=1396390040&sr=1-1&keywords=GTD+Audio+G-622H+20 0
headset wireless mic?
http://www.amazon.com/Audio2000s-Wireless-Microphone-Headband-Lavalier/dp/B001RR J1AK/ref=sr_1_1?s=electronics&ie=UTF8&qid=1396390075&sr=1-1&keywords=Audio2000s+ 6032uf
any genuine good mic will NOT be a 1/8th mic jack microphone, rather USB
The best mic at yet a low cost is one adapted from a quality XLR mic retrofitted for USB
Audio Technica AT2020 USB
depends on what you mean by "inexpensive", the AT2020 is $130, which for a microphone, a quality one, is extremely cheap.
http://www.amazon.com/Audio-Technica-AT2020-USB-Condenser-Microphone/dp/B001AS6O YC/ref=sr_1_1?ie=UTF8&qid=1396389794&sr=8-1&keywords=at2020+usb
Quality mics are not made by computer parts makers, rather retrofitted mics made by genuine microphone manufacturers.

I just bought a 4s and it charges in the wall but not when plugged into my macbook pro

help!?
my macbook pro ( up to date ) and my 4S ( up to date ) won't charge when plugged into the computer.. it works with the wall charger but not on the computer... do i need to resintall usb drivers?

Did yo use iTunes CD import feature?
Do the songs play OK in the iTunes library?
Do other songs still sync to the iPod?

Where can I find a version of GarageBand for a MacBook Air with lion 10.7.5 as the OS? Thanks

Where can I locate GarageBand compatible with lion 10.7.5. It got wiped from my MacBook Air and would like it back thanks

Buy an iLife 11 DVD from a source such as Amazon or eBay.
(110328)

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

HT1498 where can I find a receipt when renting a movie through apple tv

where can I find a receipt when renting a movie through apple tv

On the Movies app, or in any installation of iTunes on a computer (signed in with an AppleID).

Where can I find the date when the pre-sale movies will be released?

Where can I find the date when the pre-sale movies will be released?

Hi Claudia1950,
Thanks for visiting Apple Support Communities.
According to the following article on iTunes Store pre-orders, "Most pre-orders will show an expected release date near or below the pre-order button."
You may also find this information helpful:
When a pre-ordered item becomes available, you will receive an email letting you know that you can download your pre-order.
iTunes Store: About pre-orders
http://support.apple.com/kb/ht5714
Best Regards,
Jeremy

Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in, any ideas?

Decided to update iphone 4 to ios 5.1 and mid update it froze and the screen is black. Phone does not respond to any combinations of home and power buttons, when plugged into computer it does not see it is plugged in so I cannot restore or anything. Looks like the screen is on it's just unresponsive and black obviously. Has anyone had this problem? I was updating via wifi right in front of my router and my computer.

Spoke to a "senior advisor" in the Apple TV department. Her suggestions: change channel in router to minimize/eliminate wifi interference from other users; move router away from any metal - i.e., DVD player, phone modem, etc.; keep router away from wireless 2.4 gH phones, which are "notorious" for crashing wifi routers. So she confirms that the problem is one of connection to router suddenly dropping out.
My own feeling is that none of these fixes will do the trick, because it seems pretty clear that there is a hardware component here - the timing of the drops seems like an overheating issue. It takes 35-40 minutes for the box to warm up enough for the first drop; then each consecutive drop happens quicker than the one before, as it heats up more. Each time it drops, its tiny brain gets a little more scrambled; last night it finally wouldn't start up again at all.
My suggestion is that everyone who is experiencing this problem, please call Apple tech support and ask to speak to a senior advisor in the Apple TV department. Make them aware of this problem!

BSOD when plugging into Dynadock U3

Hi There,
We have a wide number of Toshiba Dynadock u3.0's working with a number of Sony Vaio Laptops. In the main they have worked pretty well, and have improved over time as new releases have come out.
At the moment we are rolling out the new Sony Vaio Pro laptops, and Dynadock is almost essential for users because the Vaio Pro's do not have an ethernet adapter. We are also downgrading them to Windows 7 from Windows 8 as we are not ready for Windows 8 on a large rollout, and holding off till 8.1 goes live.
We have had a couple of blue screen of deaths on 2 Vaio Pro's when plugging into the Dynadock. Both have the latest dynadock drivers, and we have obtained the memory dump for the machines. Before they were plugged in, they were on the WLAN in the office.
The other half a dozen devices we have in use at the moment have not yet reported this issue, and the BSOD has appeared on these two devices only once each, but I was asked to report this issue on these forums to just confirm there is no obvious issue with the Dynadocks.
In the meantime we have 3 other Vaio pros which are being tested and have not yet experinced the same issue.
Memory Dump below:
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Scratch\100813-9796-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`020dc022?
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?fffff8a0`00226022?
Symbol search path is: SRV*C:\Symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.22411.amd64fre.win7sp1_ldr.130801-1934
Machine Name:
Kernel base = 0xfffff800`03263000 PsLoadedModuleList = 0xfffff800`034a76d0
Debug session time: Tue Oct 8 11:46:36.236 2013 (UTC + 1:00)
System Uptime: 0 days 3:57:23.966
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
*                        Bugcheck Analysis                                    *
Use !analyze -v to get detailed debugging information.
BugCheck 1000009F, {4, 258, fffffa800672db50, fffff80000b9c3d0}
Unable to load image \SystemRoot\system32\drivers\DNPFW.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for DNPFW.sys
*** ERROR: Module load completed but symbols could not be loaded for DNPFW.sys
Probably caused by : tcpip.sys
Followup: MachineOwner
0: kd> !analyze -v
*                        Bugcheck Analysis                                    *
DRIVER_POWER_STATE_FAILURE (9f)
A driver is causing an inconsistent power state.
Arguments:
Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp
   subsystem.
Arg2: 0000000000000258, Timeout in seconds.
Arg3: fffffa800672db50, The thread currently holding on to the Pnp lock.
Arg4: fffff80000b9c3d0
Debugging Details:
DRVPOWERSTATE_SUBCODE: 4
IMAGE_NAME: tcpip.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 51d78659
MODULE_NAME: tcpip
FAULTING_MODULE: fffff88001800000 tcpip
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: System
CURRENT_IRQL: 2
STACK_TEXT:
fffff880`03507ed0 fffff800`032cb972 : fffffa80`0672dc10 fffffa80`0672db50 00000000`00000000 00000000`0000000d : nt!KiSwapContext+0x7a
fffff880`03508010 fffff800`032dcd8f : 00000000`00000001 00000000`00000000 00000000`00000000 fffff880`01801d60 : nt!KiCommitThreadWait+0x1d2
fffff880`035080a0 fffff800`03332ee6 : fffff880`01801d00 fffff880`00000000 00000000`00000000 00000000`00000000 : nt!KeWaitForSingleObject+0x19f
fffff880`03508140 fffff880`0180289a : fffffa80`07609a10 fffffa80`071db1a0 00000000`00000000 fffffa80`000e0082 : nt! ?? ::FNODOBFM::`string'+0x12ef6
fffff880`035081b0 fffff880`0174f375 : fffffa80`0a1cf8d0 fffffa80`00000000 fffff880`03508438 fffffa80`071db1a0 : tcpip!FlUnbindAdapter+0xaa
fffff880`03508280 fffff880`01760adf : fffffa80`071db1a0 00000000`00000000 fffffa80`0a3357c0 00000000`00000000 : ndis!ndisUnbindProtocol+0x205
fffff880`03508390 fffff880`01761c5b : 00000000`00000001 fffffa80`071db1a0 fffff880`03508420 00000000`00000001 : ndis!ndisCloseMiniportBindings+0x2df
fffff880`035084a0 fffff880`016fabc2 : fffffa80`071db1a0 fffffa80`071db1a0 fffffa80`0cecfc10 fffffa80`071db1a0 : ndis!ndisPnPRemoveDevice+0x25b
fffff880`03508640 fffff880`01764dc1 : 00000000`00000000 fffffa80`0cecfc10 00000000`00000000 fffffa80`071db1a0 : ndis!ndisPnPRemoveDeviceEx+0xa2
fffff880`03508680 fffff880`01ba6537 : 00000000`00000300 00000000`00000000 fffff880`03508848 00000000`00000000 : ndis!ndisPnPDispatch+0x862
fffff880`03508720 00000000`00000300 : 00000000`00000000 fffff880`03508848 00000000`00000000 00000000`00000020 : DNPFW+0x9537
fffff880`03508728 00000000`00000000 : fffff880`03508848 00000000`00000000 00000000`00000020 00000000`000007ff : 0x300
STACK_COMMAND: kb
FOLLOWUP_NAME: MachineOwner
FAILURE_BUCKET_ID: X64_0x9F_4_IMAGE_tcpip.sys
BUCKET_ID: X64_0x9F_4_IMAGE_tcpip.sys
Followup: MachineOwner
0: kd> lmvm tcpip
start             end                 module name
fffff880`01800000 fffff880`019fe000   tcpip      (pdb symbols)          c:\symbols\tcpip.pdb\494FAD1F538A4ED5A2BF3CC62A5FFFCB2\tcpip.pdb
    Loaded symbol image file: tcpip.sys
    Mapped memory image file: c:\symbols\tcpip.sys\51D786591fe000\tcpip.sys
    Image path: \SystemRoot\System32\drivers\tcpip.sys
    Image name: tcpip.sys
    Timestamp:        Sat Jul 06 03:52:09 2013 (51D78659)
    CheckSum:         001D78AE
    ImageSize:        001FE000
    File version:     6.1.7601.22378
    Product version: 6.1.7601.22378
    File flags:       0 (Mask 3F)
    File OS:          40004 NT Win32
    File type:        3.6 Driver
    File date:        00000000.00000000
    Translations:     0409.04b0
    CompanyName:      Microsoft Corporation
    ProductName:      Microsoft® Windows® Operating System
    InternalName:     tcpip.sys
    OriginalFilename: tcpip.sys
    ProductVersion:   6.1.7601.22378
    FileVersion:      6.1.7601.22378 (win7sp1_ldr.130705-1532)
    FileDescription: TCP/IP Driver
    LegalCopyright:   © Microsoft Corporation. All rights reserved.

Same user, different error, but still a BSOD.
Turning on the laptop when plugged into the dynadock, and he gets a BSOD. I've pasted the bugcheck in below. We are in the process of uninstalling and reinstalling all the drivers, and replacing his dynadock with a known good one to determine if the issue resides with the laptop or not.
*                        Bugcheck Analysis                                    *
ACPI_BIOS_ERROR (a5)
The ACPI Bios in the system is not fully compliant with the ACPI specification.
The first value indicates where the incompatibility lies:
This bug check covers a great variety of ACPI problems. If a kernel debugger
is attached, use "!analyze -v". This command will analyze the precise problem,
and display whatever information is most useful for debugging the specific
error.
Arguments:
Arg1: 0000000000001000, ACPI_BIOS_USING_OS_MEMORY
   ACPI had a fatal error when processing a memory operation region.
   The memory operation region tried to map memory that has been
   allocated for OS usage.
Arg2: 0000000000000000, The high portion of the physical address of the memory region.
Arg3: 0000000000000ff0, The low portion of the physical address of the memory region.
Arg4: 0000000000000025, The length of memory being mapped.
Debugging Details:
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0xA5
PROCESS_NAME: System
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff88000fa330f to fffff8000328cf40
STACK_TEXT:
fffff880`03723a58 fffff880`00fa330f : 00000000`000000a5 00000000`00001000 00000000`00000000 00000000`00000ff0 : nt!KeBugCheckEx
fffff880`03723a60 fffff880`00fa5cfe : 00000000`00000ff0 00000000`00000000 00000000`00000000 fffffa80`07d59000 : ACPI!MapPhysMem+0xcf
fffff880`03723ab0 fffff880`00fae0c0 : fffffa80`07d684f0 fffffa80`07d59000 00000000`00008000 00000000`00000000 : ACPI!OpRegion+0x136
fffff880`03723af0 fffff880`00fa8ac2 : fffffa80`07d59000 00000000`00000000 00000000`00008000 00000000`00000000 : ACPI!ParseTerm+0x17c
fffff880`03723b30 fffff880`00fa61a6 : fffff880`00fb90e0 fffff880`00fb9ac0 fffffa80`0671d740 fffff880`00fb90e0 : ACPI!RunContext+0x86
fffff880`03723b70 fffff880`00fa1054 : fffff880`00fb91e8 fffff880`00fb9ac0 fffffa80`0671d740 fffffa80`099f09a8 : ACPI!StartTimeSlicePassive+0x8a
fffff880`03723ba0 fffff800`0352d6ee : fffffa80`066d0b50 00000000`00000080 00000000`00000001 00000000`00000000 : ACPI!ACPIWorkerThread+0xd8
fffff880`03723c00 fffff800`0327df26 : fffff880`03100180 fffffa80`066d0b50 fffffa80`06748660 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`03723c40 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
ACPI!MapPhysMem+cf
fffff880`00fa330f cc              int     3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: ACPI!MapPhysMem+cf
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: ACPI
IMAGE_NAME: ACPI.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4ce79294
FAILURE_BUCKET_ID: X64_0xA5_ACPI!MapPhysMem+cf
BUCKET_ID: X64_0xA5_ACPI!MapPhysMem+cf
Followup: MachineOwner

IPnone 4s not recognized by Envy dv7-7333cl rnning Windows 8 when plugged into usb port

Laptop does not recognize iPhone 4s when plugged into any of the 4 usb ports. All usb drivers are up to date. All Win 8 and HP udates have been installed and are current. Ports do recognize memory sticks so seem to be working. Is there a special driver needed for iPhone?
This question was solved.
View Solution.

Hey texasbootz,
I'll have to get you to answer a few questions to understand what is going on exactly:
When the iPhone is plugged into the notebook, does it charge?
When the iPhone is plugged into the notebook, does it show up in device manager?
Is iTunes installed?
If it is not charged when plugged in, it is possible that the cable you are using isn't functioning properly, and you may need a replacement. Or, the iPhone itself is having some issues.
In any case, since other devices are working in all of your USB ports, it is possible that its either a software issue (with the iPhone's drivers) or an issue with the iPhone case. You'll have to contact Apple for support on either of those issues. I'd suggest trying to re/install iTunes, see if that fixes it, then to contact Apple.
Hope this helps!
I am an HP employee.
• Say thanks by clicking the 'Thumbs Up' button on the left
• Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution' if it solves your issue

Iphone 3g not recognized by computer(s). Windows 7. Charges when plugged into wall, but not PC's. Also not listen in Device Manager. I have hard reset/soft. reinstalled itunes after clean wipe. went through services... help! Windows 7

Hello all. My system is Windows 7 64bit. In the past my phone worked just fine, plug it into a usb slot, synced up, updated... but for months now it has not worked. Other Iphones will not work on this PC either with their corresponding cables. But my Iphone will also not work when plugged into other computers.. it will not show up at all.. no charge.. no itunes... no drivers show up in Device Manager. My phone works just fine when plugged into the wall with it's cable.. charges fine everything works.. but it will not charge when plugged into a computer.
So far... I have uninstalled everything related to apple... ran ccleaner.. fixed registry errors. Reboot PC, reinstall all itunes and apple components (all latest software) and nothing.
I have gonet o services and stopped and started apple mobile device. It is set to automatic.
I have hard reset the phone and soft reset it.
The cable obviously works. The Phone works when plugged into the wall.
Other Iphones will not work on my pc, nor will my iphone work on theirs
I have disabled windows firewall along with my Comodo Defense Plus and it's firewall. I have disabled my AV. I have scanned with ad aware plus, Avast, ran hijack this and fixed registry errors. Ran Ccleaner.
My device manager does not have anything related to apple in it.. I have no idea why. My Device Manager has no portable devices detected at all and does not recognize anything related to the phone.
Core 2 duo 6600
2gigs of ram
Windows 7 64 bit
I have checked all the tech support stuff I can find. I am desperate. Apple will not help me on the phone without charging me 30$.

Also.... my phone works and can do everything fine when not plugged in.. I just can't get my computer or others to recognize the darn thing when plugged in!

IPhone 4S only powers on when plugged into a wall charger, stuck in bootloop

Today I went to get my phone's screen fixed. At first, the problem was that the phone was rebooting every 3-4 minutes. Then, after it died, it doesn't power on anymore, except when it is plugged into a wall charger. However, it is stuck in a bootloop, where it shows the apple logo for about 7 seconds, then the screen goes black for about 5 seconds, then repeats. I can't unplug it or else the phone goes dead, and plugging it into my computer results in the same deadness. I've tried DFU Mode, Recovery and everything else when plugged into my computer, but it remains dead and black screened. The phone is not picked up at all, it doesn't power on or anything. It only powers on when it is wall charged, but it will bootloop. I can't get past this, and there is no way I can restore it. Help?

Your battery is dead. You will have to replace it see article:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.

Where do I find my dvd when plugged into my Macbook Air(Lion)?

Similar Messages

Maybe you are looking for