Where do i find open source code for the FF Sync capability ?

Where can i find the open source code for the FoxFire capability "Sync" (bookmarks)....
That capability should be extended to allow one or more (selectable) arbitrary sync servers; I want to look into providing such capability, with enhancements.

Similar Messages

Where's the source code for the MIDP 2.0

Hi
does anybody know if the source code for the MIDP 2.0 is available anywhere, if so please give me the link, I've searched for it but couldn't find. I need it to create a custom class based on the Command class, but need to have a look at the source code of the "Command" to make the appropriate changes to my extending class, so I can't do it without a look under the hood.
Any help would be greatly appreciated

You can find reference implementations at http://java.sun.com/products/midp/index.jsp
But they are only to assist manufacturers in implementing their own versions, and do not necessarily reflect the code running on a given device. All you can assume is what is stated in the MIDP specification. However, reading the RI code may help you better understand the spec.

Is there any differnce between the Numeric Limit Test source code from TestStand 3.0 to TestStand 3.1? How to get the source code for the Numric Limit Test for both the versions?

I need to know the differnece between the Numeric Limit Test between the TestStand version 3.0 to 3.1. If there is any differnec in the source code how to find it out? If somebody has the code can you share it?
Thanks,
Jeyan

Hi,
I don't believe there are any differences between the two versions. But you can check the source code for the Numeric Limit Test in TestStand\Components\NI\StepTypes\CommonSubsteps. But the main part of the step is the Code Module and this bit the users supplies this.
What has prompted this question?
Regards
Ray Farmer
Regards
Ray Farmer

Where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.

where can i find a Labview driver for the "8990a PEAK POWER ANALYZER" it's not on NI's site.
if there is no driver maybe you can tell me the closest instrument that comes to this one from the list at,
http://search.ni.com/query.html?lk=1&col=alldocs&nh=500&rf=3&ql=&pw=595&qp=%2BContentType%3AInstrumentDriver+%2BIDNetManufacturer%3A%22Hewlett-Packard%22&qt=peak+power+analyzer&layout=IDNet
so i could modify and use the driver

Hello,
It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
Hope this helps.
Scott B.
Applications Engineer
National Instruments

Where's the source code for the JavaFX 8 Samples?

Hi,
I just downloaded the samples for JavaFX 8 and the menu popup on the top left really caught my attention.
I'd like to study the source code for it. Does anyone know where I can find it?
I expected it here http://hg.openjdk.java.net/openjfx/8/master/rt/file but it seems it's not there.
Alternatively: Jasper Potts presented a Kiosk App at Devoxx 2012 (Antwerp), which was also used at JavaOne. I think this app uses the same Menu. And he said sources are available. But I can't remember the link.

Oh, too obvious. They are directly included into the zip. My bad I didn't notice them. I had expected them to be online somewhere. Thanks!

OIC: Need to find the Source Code for the YTDSummary.java file

Hi All,
We have 11.5.10 implemention and we are using the OIC(Incentive Compensation) Application. In the Report Module for the Year-To-Date Summary we need look for the Java Source Code.The cnytdsum.jsp file call the YTDSummary.java file. We have teh following question
1. How we can get the Java Source Code and where and which directory we need to look into?
2. Let say if we need to customize the java file how we can do that?
3. where and which directory we have to complie the java file?
Highly appreciate for any pointers
Thanks,
Johnson.

But those must be platform dependant, not really that
interesting to look at. I have never felt any need to
look at those at least.Wake up and smell the coffee, abbie! I read the source code all the time and constantly tell my students to do that, too.
1. Java source code is not platform dependent. The original poster wanted to look at linked list code, how could that be platform dependent?
2. It is the implementation of the SDK APIs, so by definition it is implementation dependent code, liable to change in a later version. So don't assume anything beyond what is claimed in the API documentation. However, sometimes the documentation is incomplete or ambiguous to you, and reading the source can provide some insight, however implementation dependent. (Light a candle or curse the darkness.)
3. Why read source code? It's a good way to learn how to program. You see something in the API and ask: how'd they do that? Or you realize you want to do something broadly similar, but you can't reuse the source code.
For example, Images are not Serializable, but suppose you want a small image that is part of an object to be serialized with the rest of the object without too much fuss (ie, without using javax.imageio). You notice ImageIcon is serializable, so you use it. (An ImageIcon has-an Image.) Then you wonder: how'd they do that? You read the source and then you know.
You live, you learn,
Nax

Source Code for the Package

Hi Team ,
I have find out the source code of the Package from dba_source at text column .
How can I find out
*1 .where the Database is mounted ie Server information and*
*2 .Name of the Sql file contains the package body*
*3 .location of the file in the Server*
Regards ,
Augustine

Augustine Vinish wrote:
Hi Team ,
I have find out the source code of the Package from dba_source at text column .
How can I find out
*1 .where the Database is mounted ie Server information and*
*2 .Name of the Sql file contains the package body*
*3 .location of the file in the Server*
Regards ,
AugustineHi - the source code isn't read in from a file by the database, it's actually stored in the database itself (have a look at the user_source view). Now you may have text files backups of your source code, that have been used previously to create the packages, but the database won't store any info about the file used to do this.

How can I download the full source code for the Java 3D package

how can I download the full source code for javax.media.j3d
especially I need the Transform3D.java class.
thanks a lot
Meir

thank you guys I'll try to do so, I suggest you to
join me.From the one of the (ex-!)Java3D team:
"I'm glad to see that Sun has decided to officially support an
open source Java/OpenGL binding, JOGL. Perhaps they will
eventually decide to make Java 3D open source. However, be
careful what you wish for. The Java 3D source is huge and
complex. There are native sections for Solaris, Windows/OpenGL,
and Windows/Direct3D, plus common code. I don't know how you'd
open source a build process that requires different pieces of
the code be built on different machines running different
operating systems."
Sounds scary - I hope we're ready for it :)

Can anyone tell me if they know where I can find a hard case for the new Retina Macbook Pro?

Can anyone tell me where I can find a hard case for a new 15" retina macbook pro?

I have not tried this.
http://www.amazon.com/Kuzy®-MacBook-Display-Rubberized-Aluminum/dp/B005G88RC4

Where can I find a downloadable benchmark for the MacBook Pro?

I have a 2013 MacBook Pro and a 2006 Mac Pro. I am thinking of dumping the Mac Pro and make my MacBook my one and only computer. I want to run a benchmark on each system to see what I am trading off with this plan. Where can I find a downloadable benchmark for a Mac running OS X?

Geekbench -> http://www.primatelabs.com/geekbench/.
Clinton
MacBook Pro (15-inch Late 2011), OS X Mavericks 10.9.5, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

Where can I find a user-guide for the awfull Text-Editor used to enter/edit these forums entries?

I am desesperate to understand how quite basic functions (just as one of many examples: how can I paste text, that I have formatted in MS Word and want to paste into a Forum Post-Entry?) can be done with the primitive and awful Text Editor used to enter/edit Forum Entries. Notice, that like many other Adobe users, I am not familiar at all with HTML and it is therefore a description of the badly named "Full Editor" that I am looking for.
Where can I find a User-Guide for this Text Editor?
My recommendation to Adobe: exercise enough brute pressure on the developers of this primitive Text Editor to force them to provide something more reasonable, more powerful and more intuitive.

Thank You Jochem
I was trying to understand how I could do things as simple as inserting text that I had previously copied. Since there are neither command menüs nor buttons for the Insert of previously copied text, I was trying a mouse right click.....and was being offered in the context menu the choice between "Insert Link", "Insert Image", "Alignement", and "Insert Table"....... but no possibility of a plain insert of previously copied text.
Now, I realize, that Clearstream supports at least the keyword shortcut of "Ctrl V" ........that I am not using in any other software (I never use any keyboard shortcuts).
Since Clearstream does not support reasonable choices in the contextual menus, I will need to memorize the most important keyword shortcuts.
By the way: I detected now, that the "Ctrl V" keyboard shortcut allows me to insert formatted text.
Even, if I will now begin to be able to use reasonably Clearstream, I am quite surprised to see that such a software provides neither reasonable Contextual Menus, nor a User Guide, nor........
Thank you again Jochem for your patience with me.

Where can I find an Access key for the user with "AS ABAP sneak preview" ?

Hi all,
I have installed AS ABAP sneak preview on my laptop.
I use username "bcuser" and password "minisap". when I try to create some objects like, i.e. Function Group for Function Module, then it ask for an access key.
Where can I find an access key for this ABAP SNEAK PREVIEW for user "bcuser"?
I have gone thru some documents, I know we need to register user in OSS and need to get an access key from the marketplace but can I register this user "bcuser" or it's already register? I need some more specific information to resolve this issue.
Please advise me on above question.
Thanks,
Haresh Solanki

Hi Rich,
I have entered ZH_XYZ as a Function Group name to create a new function group. While I am creating it, it asks for the Access Key. I tries to enter an Access Key here for the first time and it says wrong entry for access key.
Also if I try to create new Function Module, it ask me to select the Function Group. As I couldn't create a new Function Group, I tried to select from existing(from SAP System's FG), still it asks for an access key, I enter the an Access Key here, then also it says wrong entry.
I really got confused with this Access Key thing, can you provide me some insights?
Thanks,
Haresh Solanki

Where do I find my PUK Code for my PAYG T-mobile Samsung Galaxy S5

Cannot find where my online PUK Code for T-Mobile is - the explanation on EE's page is next to useless! As I can't currently use the phone - I'm in a jam!!!

Look in your online a/c under Manage Device.

Where do I find my redemption code for my creative cloud membership?

I have signed up with the creative cloud membership and cannot start using because I keep getting prompted to enter a redemption or licensing code. I did not receive this code via email. Where do I find it???

Sign in, activation, or connection errors | CS5.5 and later
Redemption Code Help
Mylenium

Where can I find example LabVIEW VIs for the NI-USRP?

There are several sources of example LabVIEW VIs for the NI USRP:
We have established a NI Community "NI USRP Example LabVIEW VIs" where you can find example VIs from us (NI) and the community.
The NI-USRP driver installs a variety of example VIs to the to the following folder on your PC:
<LabVIEW Installation path>\examples\instr\niUSRP
where you should replace <LabVIEW Installation path> with the root folder of your local LabVIEW installation. For instance, my Windows 7 32-bit PC here has LabVIEW 2011 installed and the examples can be found here: C:\Program Files\National Instruments\LabVIEW 2011\examples\instr\niUSRP
I've installed the NI-USRP driver, but I can't seem to find the new examples in the LabVIEW Example Finder. Where are the example LabVIEW VIs installed by the NI-USRP driver?
Although the NI-USRP driver does indeed install examples, the current NI-USRP 1.1 release does not update the LabVIEW Example Finder with entries for these examples. To find the examples, you can navigate the Windows Start Menu to the following location:
Start Menu\Programs\National Instruments\NI-USRP\Examples
This Start Menu entry includes several Shortcuts that point to folders that are the home to example VIs.
Sam Shearman

Hello,
It looks like Agilent/HP makes the 8990A, but I was not able to find a driver for it that we or Agilent has written for this device.
Since I am not familiar with the 8990A, I cannot recommend which drivers might be similar, but you are pointed in the right direction. Agilent themselves might know more about which models use similar command sets so that you can modify a driver easily.
Hope this helps.
Scott B.
Applications Engineer
National Instruments

Where do i find open source code for the FF Sync capability ?

Similar Messages

Maybe you are looking for