Where do i find sound effects or loops ...

Where do i find sound effects or loops?

There was a Software Update yesterday that included a few hundred mb of sound FX - they appear as mentioned in the music and sound browser, accessed on the right where the two music notes are.
If you've ever had iLife, there's a tonne more content in that too (the Jingles folder in particular contains loads of quite useful muzaky, copyright-free soundtracks in a wide range of styles).
You can also add a whole folder of music as an event, and all the subfolder names are used as tags for the audio clips within it.  I did this before I realised the iLife stuff appeared in the audio browser.  It works well either way.

Similar Messages

  • Where can i find installed effects in premiere cs3?

    Hi all,
    I am new to Premiere.
    i am using premiere cs3 and i installed Canapous Video Fx Software in my system.
    but i cant find any canapous effects folder and canapous transistions under effects folder in premiere cs3.
    could any one please tell me where can i find installed effects in premiere cs3?
    Thanks,
    Murali.

    This page says the product is for Premiere 6 and Premiere Pro 1
    http://www.expandore.com/product/Post_Production/Canopus/VideoFX.htm
    This discussion (at the bottom) says the product does not work with CS3
    http://forums.adobe.com/thread/701623

  • Crackling sounds effects on loops

    I often notice crackling sound effects at the end of a created track in GB for iOS. Especially in that case when you increase the reverb effects of an instrument. I have no idea where this comes from. I often do have to find out where the crackling sound effect comes from by analyzing each individual instrument track. Then I need to adjust and edit the composition at the very end of the timeline in order to reduce or eliminate the crackling sound effect. Very annoying for loops.

    Try this:
    Settings>General>Reset>Reset All Settings
    Reset All Settings does not delete anything, all it does is take most of the iPad's settings back to default (with the exception of accounts setting, and maybe a couple other things.) It is perfectly safe.
    The only inconvenience is that you have to go back through almost all your settings and set them to your preference.

  • Where can get this sound effects ?

    Please take a look at this video. Please listen to the sound effects which keeps repeating at at 12th sec, 21st sec, 26th sec ... etc
    Where can I get this sound effects ?
    http://www.youtube.com/watch?feature=player_embedded&v=OjRc69KCtDc
    Thanks

    It's almost impossible to identify the effect as it is blended in with others and has probably been modified as well by the editor.
    It could be one of thousands.
    I've emailed you something that may be suitable.
    Just listened to the one from MtD and it seems PD Close.
    Message was edited by: Ian R. Brown

  • Where can i find sound driver for Satellite 2100CDS?

    I reformatted the hard drive on my Satellite 2100CDS and I need the sound driver to get the sound working.
    Where can i find this?

    I can confirm that.
    As far as I know the PCI communication device could be audio and modem device.
    But it could be also a installed ISDN or LAN card. But I think teh LAN driver was installed already and the ISDN card is not placed in the notebook.
    Simply download the modem driver and try to install it.

  • Where can I find After Effects Tutorials to do a specific kind of animation?

    I am new to After Effects and to learn it, I want to find some tutorials.
    I want to jump right into this and start doing development as soon as I can.
    In order to do this, I want to study tutorials that will instruct how to do effects I want in my video.
    Here are similar videos to show as example.  I want to know how to make text and images and maybe video clips fly onto the viewing area in a similar way that is done in these three videos:

    First, if you're going to post a video that's full of obscenities, please warn us. There are 10 year olds that follow this forum and there are parents that try to watch over their children. There are even adults that are offended by such language and would rather not have it blaring from their speakers. My daughter, a regular reader of this forum and enthusiastic AE student, was humiliated when she accidentally clicked on the last video and those words started booming from her room.
    Secondly, The first example and the last example are called dynamic text animations. You'll find lots of info about those on the web if you search those terms.
    The second example is stop frame animation and requires a bunch of talent with a pen. If you can't draw it's really tough to do that kind of work. You could duplicate that kind of animation by setting up a high resolution digital camera above a large piece of paper and then setting up the camera to take 1 or 2 frames per second while you create the illustration with a pen. Then you bring the image sequence into After Effects, put it in a standard size composition and move it around to reveal the various parts of the drawing.
    Come to think of it, please don't post videos with obcene language. Keep it PG13...

  • No sound effects or music in iMovie 09

    iMovie 09     8.0.6
    iTunes 10   10.4.1
    OS X    10.6.8
    Ran software update this past weekend.
    iMovie does not find sound effects or iTunes music since I ran the software update.
    Is this an iTunes issue or iMovie issue? and
    any guidance on fixing the issue?
    Thanks

    i can't believe how much help i've received.

  • How to replace background music but retain sound effects

    I am trying to add/replace the background music of a series of clips that all have sound effects.  I noticed that many of the sound effects carry over into the other channels.  I am using the 5.1 preset currently.  Ideally I would like to add a song to this series where the music and sound effects can heard appropriately from all channels.
    Is this possible in FCP?  Do I need to use Soundtrack instead?

    That isn't SPLIT track...that is a 5.1 mix. There's a difference.  The audio is mixed, and elements are in all the tracks, but less in some and more in others. 
    SPLIT TRACK is something that we do on the high end deliverable stage, so that other departments that use what we deliver can use only the audio elements they need.  PROMOS for example (that I also cut), would like to have DIALOG separate, SFX separate and music separate.  So we can use our own music.  We would like clean dialog and SFX.  If we are given a 5.1 mix, we cannot use it, as it is not split tracked.
    Your source is a fully mixed project...the audio files are not separate. music, effects and dialog are all mixed...you cannot separate them.  Not unless you request a split track master from the company that produced the spot you are using.

  • Where can I find free back ground music and some sound effects?

    Hello out there.
    Like a lot of amateur editors I am looking for a web site to download free instrumental back ground music for my projects.
    I am looking for acoustic guitar, drum-n-bass, and also a few sound effects.
    If you have used or know of any sites please let me know.
    I am starting a project, so it's nothing I need in a hurry.
    I don't add any music until the last.
    Then I don't have to keep repositioning it on the time line as I make edits and cuts.
    Thank you any guidence.
    Jim

    Hi there,
    After searching several sites I have used http://audiojungle.net for a couple of years now and have been very happy with my purchases. It's not free but the prices are really reasonable and it is all original stuff.
    Hope that helps
    Dale
    dalehonning.com

  • Where is the sound effects library?

    I have Final Cut Studio 2. Where is the sound effects sound library located? I accidentally found the royalty free music stored in a obscure place?

    Hey there, where is the royalty free music? I found the sound effects library, but can only find loops. Is that all there is?

  • Where is the grab (camera) sound effect?

    I'm looking for a a camera shutter sound other than the one that comes with iLife. Is there such a sound in the Mac's resources? Where is it?

    Control click on Grab (the Utility) and select "Show Package Contents." Then click on resources and you'll find there are two sound files. One titled OpenShutter.snd and the other CloseShutter.snd.
    DO NOT TAKE THEM OUT OF THE FILE. You can, however, option + drag them to the desk top which will make duplicates of the original files.
    Or you could always go on Google and do a search for "camera sound effects" or something similar.
    X

  • Where is "Sound Effects" option in Iphone?

    On my ipod touch I have an option under "sounds" the "sound effects" and under that option I have 1.Speaker 2.Headphones.3 Both.............Where do I find these in iphone? Thanks

    From page 118 of http://manuals.info.apple.com/enUS/iPod_touch_3.1_UserGuide.pdf
    "Note: On the first-generation iPod touch, choose General > Sounds and select whether you want sound effects to play over the internal speaker, through the headphones, or both."

  • I can't find a appropriate sound Effect for motion template.

    Hi,
    Like my title say I can't find a appropriate sound Effect for motion template. I am using the template that goes by SATIN and There I choose SATIN BLUE-MENU.
    In that Template we can see a blue Sheet flying by. BUt I am totally lost to get a nice sound for that. So far I could not find any sound for that. I never Worked with sound Effect. I appreciate any tip.
    What is better only sound or a music playing with it? What kind sound goes with it?
    Hope to hear from you all.
    Thanks

    I think you need to give us a little more information. Which program are you currently using? Soundtrack Pro, Motion, what? What does the Satin template do?
    It sounds like what you're looking for is a "whoosh" effect -- like maybe a gust of wind or something like that. In finder search for the word "whoosh" and then select whichever drive has your Apple loops. You'll find a plethora of whooshes.
    Of course that may not be what you're looking for. You'll have be be a little more specific with what the picture is that you're trying to add sounds to, and even then, it's still your artistic choice.

  • Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
    I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
    Next step is to pan that pink noise around with my SPL meter to calibrate the room.

  • The sound effects volume is all the way down. It pops on for a second, then disappears. I can't find it in settings.   How do I get the sound back?

    The sound effects volume is all the way down.  It pops up for a second once in awhile and then disappears. I can't find it in the Setting.  Music sound plays fine, but no sound on my apps.  Any idea how to fix it?

    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

Maybe you are looking for

  • Is there any way to retreive the FileName in the mapping

    Is there any way to retreive the FileName and so that I can use that in my mapping. This is FILE2RFC scenario with NO BPM.    I am using the adapter specific message attributes in the file sender CC. Thanks, Ravi null

  • How to split Large file into Multiple small files..

    Hi,    My source file is simple  XML structure...and target side also i need to send in XML files  .. but in the source file I'm getting all the data at a time.. so source file  is more than 1000 records.. but i want to process  50 records at a time.

  • Updated to 3.0, Won't send MMS messages?

    I recently updated my iPhone to the 3.0 software and under my ROGERS iPhone value pack it tells me i get unlimited MMS messages but right now I am unable to send MMS messages. My phone tells me that it has sent them but 3 of my friends who all have i

  • Child report displays no rows

    I have the drill-down type of report using portal EA 3.0.6.3.3 . for this i have a link from main report to child report (this is a link item created on report), and it work's fine as long as i use this with portal30 user. if i login as some other us

  • IPhone 4 died while trying to update iOS 4.0.1

    Hi, I am currently in Australia and I just purchased my iPhone 4 from the Apple Store yesterday. I downloaded a number of applications after and I tried to update my iOS tonight via iTunes however, my iPhone just died after it finish updating. I coul