Where do I find Style Match in PSE 12?

In Elements 9 the Style Match is under Guided on the right. When you click on it a screen opens up showing your photo and a large blank square beside it. Below that are six thumbnail photos of different styles. You then drag one of the thumb nails into the empty box beside your photo. It then copies the style from the thumbnail on to your photo. I cannot find this on
Elements 12.

This should be in a separate thread, so I will branch it off for you. Enhance menu>Photomerge>Style Match.

Similar Messages

I cannot see deactivate under Help on my Photoshop Elelments 12 product, where might I find it?

I cannot see deactivate under Help on my Photoshop Elelments 12 product, where might I find it?

In PSE 12 and 13 it's Sign Out instead of Deactivate. Same thing, same place in the Help menu (check the editor if you don't see it in the organizer).

Where can i find the serial number to install it PSE 11 at work?

I installed PSE 11 on my home computer, but didn't write down Serial Number. When I go to retrieve it with redemption code, it says not valid. Where can i find the serial number to install it at work? Any help is appreciated.

If you originally registered your product you can log-in with your Adobe ID and browse your purchase history. From the top left of this web page click the red Adobe logo and choose Manage Account.

PSE 8 where can I find a download link?

Hi I have had purchased PSE 8 and have been using it until my computer crashed and needed replacing. I have now discovered the original disk is no longer useable as I suspect kids were using it as a toy. I have tried using disk cleaners/polishers etc. but still am unable to get the computer to read from it. Does anyone know where I can download a copy of PSE 8?
I have come accross these posts but none of them were useful to me:
Thread 1
Thread 2
Thread 3
Any help would be appriciated!
Joanne

>now discovered the original disk is no longer useable
I have read that Adobe will, as long as the supply lasts, replace bad media
Since PE9 has been out "about" a year, I will GUESS Adobe will no longer have any PE8 discs
But, you need to contact Adobe... nobody at this user to user forum can help with replacements

Is there style-match option in photoshop elements 10 & 11?

if it wasent.... where can i download elements 9?

Sure. It's in the photomerge section. In PSE 10, File>New>Photomerge>Style Match. In PSE 11, it's under Enhance>Photomerge>Photomerge Style Match.

How do I download Mavericks OS to my MacBook Pro? Where do I find it? Please help!

How do I download Mavericks OS to my MacBook Pro? Where do I find it? Thanks!

Mima2014 wrote:
How do I download Mavericks OS to my MacBook Pro?
First... Check here to see if your Mac is compatible...
http://www.apple.com/osx/how-to-upgrade/
If so... would recommend at least 4GB of RAM... if not 8 GB
It is important to get the Correct and Matching RAM
See Here > OWC RAM > http://www.macsales.com
The above site also has videos on how to Install RAM should you need it...
Also... Check here for compatibility of 3rd party Software you may be using...
http://roaringapps.com/apps:table
NOTE that Rosetta is no longer supported in Mavericks, Mountain Lion and Lion.
It is both Prudent and Recommended to Backup Before any Major Update or Upgrade.
Mac World Installing Mavericks.
http://www.macworld.com/what you need-to-know.html

Is there an instruction sheet detailing how to install Photoshop Elements 13 (from a DVD disk), on a Windows 8.1 computer, and if so, where do I find it

Is there an instruction sheet detailing how to install Photoshop Elements 13 (from a DVD disk), on a Windows 8.1 computer, and if so, where do I find it?

Googled for an instruction sheet. Got the following.
https://helpx.adobe.com/photoshop-elements/getting-started/install-pse.html
and
https;//helpx.adobe.com/photoshop-elements/kb/photoshop-elements-installation-errors.html
(Don't know why the second one didn't turn into a link, that's the url that printed out at the bottom of the page)
In any case it doesn't matter. I returned it to the store where I bought it.
Rule #1; Don't use a product if the people who produce that product (software, hardware, etc.) don't properly support it.
User forums and\or chat lines, are useful and may help. But! They do not constitute proper support (not for installation purposes anyway).

Where can I find the songs in my icloud?

hi everyone,
I just bought a year's subscription to iTunes Match and most of my songs have been matched. The only thing is... I have no idea where to find these matches? I know they are supposed to be in my iCloud and I want to access my cloud from my mac (I'm using OS X 10.7.5.. no idea at all if that's relevant but just in case) and download my matches but I have no idea where to get them from.
I feel like there must be some huge thing that I'm missing here because it sounds like it should be obvious and easy, but I have no clue what I am supposed to do. Any help? Thanks.

Hi,
You will find the music in your iTunes library. iCloud is a different product and does not store music.
iTunes Match scans your library, matches or uploads your music. Nothing happens to the music on your computer - uploaded tracks go to Apples servers.
Make sure you add iCloud status, bit rate and file type columns are shown in match. iCloud status will show if tracks have been matched, uploaded, purchased, inelligible, duplicate or waiting.
Matched - if bit rate for your original track is less than 256 kpbs, you can delete track from library but not from cloud and download upgrade matched AAC file.
Uploaded - don't need to anything here as the files in match are the same except of the file was a lossless or aiff file where they are transcribed to 256 Kbps for upload - files on computer not changed.
Purchased - not need to do anything if already 256 Kbps purchased audio files but if the track is 128 Kbps protected AAC then you may be able to upgrade by deleting original and downloading 256 version. Some protected files may not be upgraded as song is no longer in iTunes Store - sometimes these tracks are matched and upgraded version downloaded
Jim

Where can i find the zoom and pinch tool in New Adobe DRAW App

Hi People
Dose anyone know where i can find the zoom and pinch tool in adobe draw?
On adobe ideas it was on the tool bar with the pan icon that looks like a hand and the cross icon for the zoom.
Just wondering if Adobe put it in the new Adobe Draw program, i hope so, its hard to get detail with out the zoom tool.
Best, Phil

Oops Sorry Jumped the gun again! i found out how to do it. I was using my jot touch styles which mean you have to hold down the icon on the upper left with the styles then use your fingers to do the pinch and zoom gesture to make it work

Where do we find a box command in sap script

Hai,
where do we find a box command in sap script, how to create box command ,
its urgent help out

Hi
SAPScripts
POSITION WINDOW
SIZE WIDTH '160' MM HEIGHT '140' MM
BOX FRAME 10 TW
Box
BOX HEIGHT '11' MM WIDTH '160' MM FRAME 10 TW INTENSITY 35
linessssssss
BOX XPOS '20' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '45' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '80' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '120' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
Boxes, Lines, Shading: BOX, POSITION, SIZE
Use the BOX, POSITION, and SIZE commands for drawing boxes, lines, and shading to print particular windows within a form or passages of text within a window in a frame or with shading.
The SAP printer drivers that are based on page-oriented printers (the HP LaserJet driver HPL2, the Postscript driver POST, the Kyocera Prescribe driver PRES) employ these commands when printing. Line printers and page-oriented printers not supported in the standard ignore these commands. You can view the resulting printer output in the SAPscript print preview.
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX Command
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
XPOS, YPOS
Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH
Width of the box. Default: WIDTH value of the SIZE command.
HEIGHT
Height of the box. Default: HEIGHT value of the SIZE command.
FRAME
Thickness of frame.
Default: 0 (no frame).
INTENSITY
Grayscale of box contents as %.
Default: 100 (full black)
Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the form header
1 LN = height of a line relative to the LPI specification in the form header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shading having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION Command
Syntax
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN
Origin of the coordinate system.
WINDOW
Sets the values for the left and upper edges to match those of the current window (default setting).
PAGE
Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
SIZE Command
Syntax
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started, the SIZE value is set to the same values as the window itself (default setting).
Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.
WIDTH, HEIGHT
Dimensions of the rectangle or line.
WINDOW
Sets the values for the width and height to the values of the current window (default setting).
PAGE
Sets the values for the width and height to the values of the current output page.
/: SIZE WINDOW
Sets WIDTH and HEIGHT to the current window dimensions.
/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM
Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.
/: POSITION WINDOW
/: POSITION XORIGIN -20 TW YORIGIN -20 TW
/: SIZE WIDTH +40 TW HEIGHT +40 TW
/: BOX FRAME 10 TW
A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
Regards
anji

How do I format links? And where can I find easy help info?

How do I override the blue color added when I add a hyperlink? (I found the modify page properties/links drop-down to remove the underline, but I can't figure out how to default to the original text color and only show link during rollover, or add my own formatting (e.g. strong) to show the link.
Also - can anyone tell me where to find the most comprehensive help section for Dreamweaver CS5, where I can find answers to questions like this link question? I've tried search, reference, help features within Dreamweaver, tutorials/faqs/forums on the adobe.com site (and I've been using Lynda.com tutorials which are great). But I can't find basic answers to items like reformatting links. Help!!! Thanks

How to style your links is not so much a Dreamweaver issue, I guess it is probably your knowledge of CSS that is running short here.
There is plenty of info on the web, just google for "styling links CSS" and you'll find lots of how-to's
Your best option to find help might be to buy a good book. I learned a lot from Dreamweaver CS5: The Missing Manual, First Edition by David Sawyer McFarland
I found CSS: The Missing Manual, 2nd Edition by the same author maybe even more useful, since it focuses solely on CSS instead of on the Dreamweaver program details. So check that out too, or buy them both, like I did. Both are excellent books, which will surely answer your questions and learn you how to do things right from the start.

Sun C++ 5.13 SunOS_sparc Beta2 2014/06/17: Error: Could not find a match for std::_Tuple_impl 0, unsigned&& ::_Tuple_impl(std::tuple unsigned&& , unsigned) needed in std::tuple unsigned&& ::tuple unsigned, void (unsigned&&).

I think I downloaded the latest Solaris Studio version. When I compile my code, I got the following error:
bash-3.00$ gmake -f Makefile.sun
CC -c -o metadata.o metadata.cpp -I. -I.. -g -O0 -std=c++11 -I/export/home/oracle/zhifan/boost_1_55_0 -I/export/home/oracle/zhifan/instantclient_11_2/sdk/include -V
CC: Sun C++ 5.13 SunOS_sparc Beta2 2014/06/17
ccfe: Sun C++ 5.13 SunOS_sparc Beta2 2014/06/17
"metadata.cpp", line 20: Warning: db hides databus::MetadataManager::db.
"metadata.cpp", line 26: Warning: db hides databus::MetadataManager::db.
Error: Could not find a match for std::_Tuple_impl<0, unsigned&&>::_Tuple_impl(std::tuple<unsigned&&>, unsigned) needed in std::tuple<unsigned&&>::tuple<unsigned, void>(unsigned&&).
"/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 868:     Where: While instantiating "std::tuple<unsigned&&>::tuple<unsigned, void>(unsigned&&)".
"/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 868:     Where: Instantiated from std::forward_as_tuple<unsigned>(unsigned&&).
"/export/home/oracle/zhifan/SolarisStudio12.4-beta_jul14-solaris-sparc/lib/compilers/CC-gcc/include/c++/4.8.2/bits/stl_map.h", line 485:     Where: Instantiated from non-template code.
1 Error(s) and 2 Warning(s) detected.
gmake: *** [metadata.o] Error 2
with the same code, It can be compiled with g++ on Linux platform.
1 Is the issue same as 12.4 Beta, Error: Could not find a match for std::_Tuple_impl<0, std::string &&>::_Tuple_impl(std::tuple<std::string &&> ?
2 Do we have any workaround for this issue?
3 When will the final 12.4 release be available?

I can't say for sure whether your problem is fixed in the final release without a test case, but I'd say the chances are very good.
The final release will be announced soon. Watch this space, or the Oracle Solaris Studio page for an announcement.

12.4 Beta, Error: Could not find a match for std::_Tuple_impl 0, std::string && ::_Tuple_impl(std::tuple std::string &&

Hi,
would you guys say code that compiles fine without -std=c++11 should also compile *with* -std=c++11?
raider@sol112_x86:/tmp $ CC -V
CC: Sun C++ 5.13 SunOS_i386 Beta2 2014/06/17
raider@sol112_x86:/tmp $ CC buggy.cc
raider@sol112_x86:/tmp $ CC -std=c++11 buggy.cc
Error: Could not find a match for std::_Tuple_impl<0, std::string &&>::_Tuple_impl(std::tuple<std::string &&>, std::string ) needed in std::tuple<std::string &&>::tuple<std::string, void>(std::string &&).
"/opt/SolarisStudio12.4-beta_jul14-solaris-x86/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 868:     Where: While instantiating "std::tuple<std::string &&>::tuple<std::string, void>(std::string &&)".
"/opt/SolarisStudio12.4-beta_jul14-solaris-x86/lib/compilers/CC-gcc/include/c++/4.8.2/tuple", line 868:     Where: Instantiated from std::forward_as_tuple<std::string>(std::string &&).
"/opt/SolarisStudio12.4-beta_jul14-solaris-x86/lib/compilers/CC-gcc/include/c++/4.8.2/bits/stl_map.h", line 485:     Where: Instantiated from non-template code.
1 Error(s) detected.
raider@sol112_x86:/tmp $ cat buggy.cc
#include <map>
#include <string>
typedef std::map<std::string, std::string> StrStrMap;
int main(void)
    StrStrMap dict;
    dict["bug"] = "feature";
    return 0;

C++11 is approximately a superset of C++03. If you write in the common subset, the code will compile in any mode. For example, a basic hello-world program
#include <iostream>
int main() { std::cout << "Hello, world!\n"; }
will compile and run as C++98/03, as C++11, as C++14, and I'm sure will also work with the next standard, planned for 2017.
But if you use syntax or library types and functions that are new in C++11, the code will not compile as C++03.
In my previous post, I might have sounded too negative about compiling C++03 code in C++11 mode. If you have a C++03 program that is intended to be portable, and that works with different compilers on different platforms, chances are good that it will continue to work in C++11. The chances are very good that only minor modifications will be needed.

Want to customize Menu Bar - Where can I find explanations of the almost 200 editable items in the Properties for "ul.MenuBarHorizontal" ?

I want to design/customize a horizontal Menu Bar. However I'm flying blind on what the meanings (parameters) of each of the almost 200 editable items are in the Properties for "ul.MenuBarHorizontal" ?
Where can I find each item explained? Have looked on line and in the library.
Thanks.

Here's a link to the help pages for the Spry Menu Bar: http://help.adobe.com/en_US/Dreamweaver/10.0_Using/WS90E6DF98-60A3-41a4-B427-CD057D57BB7A. html#WS37318579-3916-46db-80D1-A8C5E6777BE5a
Understanding the CSS for a Spry Menu Bar is an exercise in understanding descendant styles. David Powers has just published a good tutorial on the Spry Menu Bar. His explanations are very good.
http://foundationphp.com/tutorials/sprymenu/customize1.php will get you there.
Beth

In the older version of Firefox I could "view source" but the new version does not display it. What happened to it and where can I find it now?

The new version of Firefox "View" tab only shows Toolbars, Sidebar, Zoom, Page Style, Character Encoding and Full Screen. Where can I find "source" in the new version?

View Page Source; try any of these:
*CTRL+U
*right-click on the page, choose View Page Source
*Firefox button > Web Developer > View Page Source
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Where do I find Style Match in PSE 12?

Similar Messages

Maybe you are looking for