Where do i find the code to unlock volume on classic ipod

Where do i find the code to unlock volume on classic ipod

You can't find the code unless you ask the code to the person that setted it or restore your iPod in iTunes.
Franklin

Similar Messages

  • Where will i find the code to unlock my ipad?

    I lost my ipad and found it again after 6 months...yey! We used another ipad to track it but now i need to enter a passcode of which i cannot find.
    Any ideas where i find the code? I never got chance to upload icloud so i cannot access it through that. I'm at a loss of what to do next.

    Only you will know the passcode, it's not stored anywhere. If you've forgotten it then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808
    If you do it via a different computer then :
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • Where do I find the code on my Mac to allow iPhone text messages to also be sent and received on iMac?

    where I can find the code that is supposed to be shown on my Mac to allow iphone text messages to also be sent and received on iMac?

    Hi,
    Long Answer.
    Enable the iPhone for Messages.  Make sure it Verifies and that your can Send from the iPhone Number.
    To do that you can Enable the iMessages account in Messages on the Mac using and Apple ID.
    The iPhone can then send from the iPhone Number to the Apple ID (Mac).
    Then add the Apple ID to the iPhone.
    The Mac will then get a pop up saying that the iPhone is using the Apple ID and the iPhone number.
    Accept this Pop up to enable the Mac to "sync" the iPhone Number iMessages.
    (Sync in this case is only "Display on All Devices").
    Now you can enable Text Forwarding on the iPhone.
    IF the Apple ID and iPhone Number are already linked this will launch the app if it is Quit and display the Code number you need.
    The number then need to be entered back on the iPhone to complete the process.
    The Text Forwarding option on the iPhone should then show the device(s)  that are linked this way.
    9:12 pm      Wednesday; March 11, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Where do I find the "code" to redeem purchase?

    i just purchased a new dell computer.  I am currently setting it all up.  I purchased Adobe when buying the computer from Dell.  Now, when setting it up, it asks me for my "code to redeem my purchase".  Where do I find the code?

    Hi RoseAnn2,
    Please refer the article: http://helpx.adobe.com/x-productkb/global/redemption-code-help.html.
    Regards,
    Romit Sinha

  • I've just bought an iPhone with a vodafone pay as you go sim. There should be a 12digit pack number for me to activate the sim and the credit. Does anyone know where i can find the code?

    I have just bought an iPhone with vodafone pay as you go sim. It was meant to come with a freedom freebie credit allowance. However I need a 12digit code to activate this. There is no code on my receipt. Where would I find this?

    I bought this online through the apple store. I have no one to contact but to ask the community!

  • HT5622 Where do I find the code required for the registration of accounts in I store?

    Where do I find code required for registration of account on Istore

    What code are you referring to ? When creating an account there is an optional field for entering an iTunes gift card code - is that what you mean ? If you do then that field can be left blank, and as iTunes gift cards aren't available in all countries (and they are country-specific) then you might not be able to fill it anyway.

  • Where can i find the usb cable that fits first generation ipod?

    I have the scroll wheel ipod and the usb cord is an older version. (looks like the new version with a trapazoid added on the right end). where can i find a cable that fits? and what is it called?

    The one you are describing sounds like a FireWire sync cable but they are becoming hard to find. You can use any USB to 30 pin cable to charge your iPod. It will sync slower but will not harm your original iPod.
    Here is just the cable:
    http://www.amazon.com/Apple-Connector-FireWire-Cable-White/dp/B00009KO0B/
    It won't work to charge or sync newer iPods, or any iPhone or iPad.

  • How do i reset pass code to unlock volume limit on ipod model mc525ll

    I forget my passcode for my ipod 6th gen. model MC525LL.  i want to adjust the volume and can't without the passcode.  How do I reset it?  Thanks.

    Hi blondop,
    Welcome to Apple Support Communities.
    If you cannot remember the passcode, you can restore the iPod nano and then set it up again. The articles below provide more details about the maximum volume limit and restoring the iPod.
    Setting the maximum volume limit on iPod
    http://support.apple.com/kb/ta38403#ipod
    Note: If you forget the combination, you can restore iPod.
    Restoring iPod to factory settings
    http://support.apple.com/kb/ht1339
    How to restore iPod
    Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
    Download and install the latest version of iTunes if necessary.
    Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
    After a few moments, your iPod will appear in the Source panel in iTunes.
    Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
    Click Restore.
    If you are using a Mac, you will be asked to enter an administrator’s name and password.
    A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
    Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
    Leave iPod connected to computer to complete restore (typically applies newer iPod models).
    During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
    Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
    After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
    -Jason

  • Where can I find the configuration profiles I installed on my iPod?

    Befores it used to be under Preferences > General >Profiles. But I can't find it in iOS 6...

    The iIOS 6 Users Gudie says it will be between Accessibility and Reset.
    "Profiles
    This setting appears if you install one or more profiles on iPod touch. Tap Profiles to see information about the profiles you’ve installed."
    Are the profiles installed?
    iPod touch User Guide iOS 6

  • Where can i find the password for the capsule wifi ?

    where can i find the password to unlock my wifi of the capsule ?

    From user Bob Timmons:
    Open Macintosh HD > Applications > Utilities > KeyChain Access
    Look for the listing with the name of your wireless network and double click it
    Enter a check mark next to Show Password
    Enter your main administrator password for the Mac
    Your wireless password will be revealed

  • Where can I find the relation between company code and plant?

    where can I find the relation between company code and plant?
    I need to the list of plants under a company code.
    Which table?

    yes,wayne weng   .What you said is right.
    Thank you very much!
    My MSN:[email protected]

  • Where can I find the original code for class in Java API

    I am learning Java programming and wanted to see how professionals handel all cases. Can anyone tell me where I can find the original implementation code for classes in Java API? It would be a great help for me.

    the basic source is where you installed java in a file called java.src, its either in the main dir of one of the sub dirs ( mmm ), contains all the source code for all the classes in the api.

  • Netflix wants my device code in order for me to be able to download movies. Where do I find the device code?

    Netflix is asking for my device code in order for me to be able to download movies on my iPad.  Where do I find the device code?

    You don't download movies from netflix-you stream them.
    You dont use the netflix website, go into the app store and download the netflix app and use it.

  • I have a 10.5.8 MacBook Pro that I want to upgrade to Snow Leopard.  Where do I find the upgrade code

    I have a MacBook Pro from September 2007 that I want to upgrade to the latest OS.  I have 10.5.8 on it now, but can't seem to find the code or files any where to upgrade it to 10.6.8 (Snow Leopard) so I can then step it up to Mountain Lion.  Anyone have a link to where I can find this code.

    Upgrading to Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    If you need to purchase Snow Leopard contact Customer Service: Contacting Apple for support and service. The price is $29.00 plus tax. You will receive physical media - DVD - by mail.
    Third-party sources for Snow Leopard are:
    Snow Leopard from Amazon.com
    Snow Leopard from eBay
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store.
    If you need to purchase Lion contact Customer Service: Contacting Apple for support and service. The cost is $19.99 (as it was before) plus tax.  It's a download.
    Be sure your computer meets the minimum requirements:
    Apple - OS X Mountain Lion - Read the technical specifications.
    Macs that can be upgraded to OS X Mountain Lion
    iMac (Mid 2007 or newer)
    MacBook (Late 2008 Aluminum, or Early 2009 or newer)
    MacBook Pro (Mid/Late 2007 or newer)
    MacBook Air (Late 2008 or newer)
    Mac mini (Early 2009 or newer)
    Mac Pro (Early 2008 or newer)
    Xserve (Early 2009)
    Are my applications compatible?
    See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
    Am I eligible for the free upgrade?
    See Apple - Free OS X Mountain Lion upgrade Program.
    For a complete How-To introduction from Apple see Apple - Upgrade your Mac to OS X Mountain Lion.

  • Where i can find the value categry code and element in cjvc

    hi gurus
    where i can find the value categry code and element in cjvc .in which table these fields are stored.could anyone tell me relation.
    Thanks & Regards
    Sandya

    not answer

Maybe you are looking for

  • Are the iPhone 5 and 6 different kinds of devices?

    In reference to the section: "I want to use a backup of my iOS device for a different kind of iOS device" in Apple Support article HT201418 (If you need help restoring from an iCloud backup - Apple Support). That section lists the following as data t

  • Bt.vision or lack of

    Hi having problems with my bt vision had it just over a year not very successfully i can add now apparrenly i should never have been advised to have it as my broadband speed is not fast enough .I am now at the stage of waiting until the last engineer

  • Updated to 4.0 beta 10 now it won't open

    My son downloaded the update to beta 10, now I can't open Firefox at all. when you click on the icon, it looks like it is going to open, and if you look in task manager firefox.exe*32 appears in the processes tab but does not appear in open applicati

  • Need Help with Photoshop elements 5.0

    I know that this is a very old version of photoshop elements, but I would still like to use it, since I paid $100.00 for it.  The problem is that it hasn't been installed onto my computer for awhile and now when I go to install it I get an error msg.

  • IDVD 3 calibration problems when burning

    Help! I'm having calibration error messages when burning iDVD-R discs in iDVD 3. I've had success in the past with Maxell DVD-R 8X discs but other brands and other speeds won't work. I can't find Maxell DVD-R 8X discs anymore. Do I need to update the