Where do I find the demo songs?
Where in Garageband do I find the several Gigabytes of demo songs I installed? I wanted to listen to any royalty free built in songs and see if they would work for an advertising project, (1-3 min. commercials).
I can find the Chinese Text Editor, but not the demo songs.
Thanks!
Do a finder or spotlight search for Garageband and look under the "files" section. The songs (assuming they were installed) will be there.
Unfortunately, I don't think the songs as they are are royalty free. I may be wrong (prolly am) but I know that you can't reproduce just the loops as they are...which leads me to think that the demo songs, as they are, are off limits too. Read the licensing agreement that came with GB.
Hope this helps.
X
Similar Messages
-
Where can I find the demo chocolate.key?
Hi everyone.
In app store/keynote page, I saw a screenshot showing a keynote presentation about "Chocolate Through the Ages". The title bar shows the file name as Chocolate.key. It looks stunningly beautiful. Does anyone know where can I find the demo? Thanks!!These are mock ups, created for all the Apple applications, Aperture Finalcut, Pages. They are shown on the web site for illustrative purposes, there are no demo versions available.
The theme used for the coffee presentation, is Typeset, have a go using that for your own sample presentation. -
Did they take out the free section, you know where they might offer a free episode/song/video/etc in one spot (or at least did they for Canada)? I can find the english song of the week (I used to enjoy browsing both the english and french), but that is it...
Nevermind. For some reason it loaded wrong/poorly/? It was back after I closed itunes down and re-opened it.
Thanks though -
Where can I find the song list for the glenn miller gold collection
Looking for help!!
Where can I find the song list for the CD of The Glenn Miller Gold Collection DIGITAL DEJAVU?
[email protected]Thank you for trying but this is the wrong disk. I'm looking for the list on the disk made in Italy by Phonocomp SpA . It has a number on it of 5-105-2 and CEDAR DIGITAL REMASTERING 1992DEJAVU.
I have tried to attach a picture of the disk but it will not paste to this reply.
Herbert Hamlin [email protected] -
Where can I find the oracledi-demo.zip ?
Hello All,
I am to new to ODI... I have installed ODI 11.1.1.6.0 in OEL5. I was going through the getting started guide and came through installing/configuring the demo environment.
The doc says that it will be there with existing installation or else locate the folder in the companion CD.
Where can I find these demo files?
Thanks
kannaSorry..... I found that in the ODI downloads page.
http://www.oracle.com/technetwork/middleware/data-integrator/downloads/index.html
Thanks
Kanna -
Where can I find oracledi-demo-2032252.zip used in the ODI 12c Getting Started Guide?
Where can I find oracledi-demo-2032252.zip used in the ODI 12c Getting Started Guide?
Bye,
Rumburakhttp://www.oracle.com/technetwork/middleware/data-integrator/overview/oracledi-demo-2032252.zip
-
Where do I find the list of songs I bought in Febuary
where do I find the list of songs I bought in Febuary
Hi there,
You may find the article below helpful.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
-Griff W. -
where do i find the song i just purchased from itunes store?
Using iTunes 11.0.1. Although listed in recent purchase in the Store, I cannot find the album on my MacBook Pro. And I cannot find any option to sort the library by "Date Added."
-
Where can i find a demo of adf faces 11 preview??
Where can i find a demo of adf faces 11 preview??
Just like the one in adf-faces-10_1_3_0_4.zip.
I think it's the best tutorial to study adf faces 11!
Anyone can help? Thank you!http://www.oracle.com/technology/products/jdev/11/index.html
Here there are some on line demos and also if you click on the Sample Application you can download and try out the sample (5 minutes).
Regards
Grant Ronald -
Where can we find the methods of the classes in OLE Interface
Hi All,
I am developing the code to download the file into multiple sheets of excel file.
got many links and sample codes from this forum.
but my doubt is where can we find the methods in applications.
Example:
add, cells, range etc are the methods in the object excel.application.
I want to find all other methods in this same object.
Please help me.
thanks in adv.
EswarHE,
see this demo program which is in DWDM
*& Report DEMOEXCELINTEGRATION *
INCLUDE rdemoexcelintegrationtop.
DATA: control TYPE REF TO i_oi_ole_container_control.
DATA: container TYPE REF TO cl_gui_custom_container.
DATA: link_server TYPE REF TO i_oi_link_server.
DATA: table_coll TYPE REF TO i_oi_table_collection.
DATA: retcode TYPE t_oi_ret_string,
document_type TYPE soi_document_type
VALUE soi_doctype_excel_chart,
document_format TYPE soi_document_type.
DATA: doc_url TYPE t_url.
DATA: usa_sales TYPE i VALUE 1000,
europe_sales TYPE i VALUE 2000,
japan_sales TYPE i VALUE 1000,
asia_sales TYPE i VALUE 100,
america_sales TYPE i VALUE 100,
africa_sales TYPE i VALUE 100.
DATA: total_sales TYPE i VALUE 0.
DATA: BEGIN OF test_line, region(50), sales TYPE i, END OF test_line.
DATA: test_table LIKE TABLE OF test_line.
DATA: wa_test_table LIKE test_line.
CLASS c_excel_document DEFINITION
CLASS c_excel_document DEFINITION.
PUBLIC SECTION.
DATA: proxy TYPE REF TO i_oi_document_proxy.
DATA: document_type TYPE soi_document_type.
DATA: data_table TYPE sbdst_content,
data_size TYPE i,
doc_url TYPE t_url.
METHODS: constructor
IMPORTING control TYPE REF TO i_oi_ole_container_control
document_type TYPE soi_document_type.
METHODS: on_close_document
FOR EVENT on_close_document OF i_oi_document_proxy
IMPORTING document_proxy has_changed.
METHODS: on_custom_event
FOR EVENT on_custom_event OF i_oi_document_proxy
IMPORTING document_proxy event_name param_count
param1 param2 param3.
METHODS: create_document
IMPORTING open_inplace TYPE c DEFAULT ' '
EXPORTING retcode TYPE t_oi_ret_string.
METHODS: open_document
IMPORTING open_inplace TYPE c DEFAULT ' '
open_readonly TYPE c DEFAULT ' '
EXPORTING retcode TYPE t_oi_ret_string.
METHODS: open_document_url
IMPORTING open_inplace TYPE c DEFAULT ' '
open_readonly TYPE c DEFAULT ' '
doc_url TYPE t_url DEFAULT ' '
EXPORTING retcode TYPE t_oi_ret_string.
METHODS: retrieve_document
IMPORTING documents TYPE document_list
EXPORTING document_format TYPE soi_document_type
doc_url TYPE t_url.
METHODS: close_document
IMPORTING do_save TYPE c DEFAULT ' '
RETURNING value(retcode) TYPE t_oi_ret_string.
PRIVATE SECTION.
DATA: control TYPE REF TO i_oi_ole_container_control.
ENDCLASS.
DATA: l_fcode LIKE fcode.
DATA: document TYPE REF TO c_excel_document.
DATA: bds_instance TYPE REF TO cl_bds_document_set.
*& Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
SET PF-STATUS 'MAIN0100'.
SET TITLEBAR '001'.
retcode = c_oi_errors=>ret_ok.
IF control IS INITIAL.
DATA: b_has_activex.
CALL FUNCTION 'GUI_HAS_ACTIVEX'
IMPORTING
return = b_has_activex.
IF b_has_activex IS INITIAL. MESSAGE e007. ENDIF.
CALL METHOD c_oi_ole_control_creator=>get_ole_container_control
IMPORTING control = control
retcode = retcode.
CALL METHOD c_oi_errors=>show_message
EXPORTING type = 'E'.
CREATE OBJECT container
EXPORTING container_name = 'CONTAINER'.
CALL METHOD control->init_control
EXPORTING r3_application_name =
'Demo' "#EC NOTEXT
inplace_enabled = 'X'
inplace_scroll_documents = 'X'
parent = container
register_on_close_event = 'X'
register_on_custom_event = 'X'
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message
EXPORTING type = 'E'.
CALL METHOD control->get_link_server
IMPORTING link_server = link_server
retcode = retcode.
CALL METHOD c_oi_errors=>show_message
EXPORTING type = 'E'.
CALL METHOD link_server->start_link_server
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message
EXPORTING type = 'E'.
CALL METHOD control->get_table_collection
IMPORTING table_collection = table_coll
retcode = retcode.
PERFORM refresh_sales.
CREATE OBJECT document
EXPORTING control = control
document_type = document_type.
CALL METHOD table_coll->add_table
EXPORTING table_name = 'SALES_IN'
table_type = table_coll->table_type_input
IMPORTING retcode = retcode
CHANGING data_table = test_table.
ENDIF.
IF bds_instance IS INITIAL.
CREATE OBJECT bds_instance.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
l_fcode = fcode.
CLEAR fcode.
CALL METHOD cl_gui_cfw=>dispatch.
CASE l_fcode.
WHEN 'EXIT'. "Zurück
IF NOT document IS INITIAL.
CALL METHOD document->close_document.
FREE document.
ENDIF.
IF NOT link_server IS INITIAL.
CALL METHOD link_server->stop_link_server
IMPORTING retcode = retcode.
FREE link_server.
ENDIF.
IF NOT table_coll IS INITIAL.
FREE table_coll.
ENDIF.
IF NOT control IS INITIAL.
CALL METHOD control->destroy_control
IMPORTING retcode = retcode.
FREE control.
ENDIF.
IF NOT bds_instance IS INITIAL.
FREE bds_instance.
ENDIF.
LEAVE TO SCREEN 0.
WHEN 'CREATE'.
IF NOT control IS INITIAL.
document->data_size = 0.
CLEAR document->data_table.
CALL METHOD document->create_document.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ENDIF.
WHEN 'SELECT'.
IF NOT control IS INITIAL.
DATA: documents TYPE document_list.
DATA: descr TYPE document_descr.
CLEAR documents.
descr-document_name = 'Car Sales Chart'(do1).
descr-document_id = 'DEMOEXCELCHART1'.
APPEND descr TO documents.
descr-document_name = 'Car Sales Chart 2'(do3).
descr-document_id = 'DEMOEXCELCHART2'.
APPEND descr TO documents.
descr-document_name = 'Car Sales Sheet'(do2).
descr-document_id = 'DEMOEXCELSHEET1'.
APPEND descr TO documents.
CLEAR doc_url.
CALL METHOD document->retrieve_document
EXPORTING documents = documents
IMPORTING document_format = document_format
doc_url = doc_url.
IF NOT doc_url IS INITIAL.
CALL METHOD document->close_document.
CALL METHOD document->open_document_url
EXPORTING open_inplace = 'X'
doc_url = doc_url
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ELSE.
MESSAGE e010.
ENDIF.
ENDIF.
WHEN 'OPEN'.
IF document->data_size NE 0.
IF NOT control IS INITIAL.
CALL METHOD document->open_document
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ENDIF.
ELSE.
MESSAGE e005.
ENDIF.
WHEN 'INPLACE'.
IF document->data_size NE 0.
IF NOT control IS INITIAL.
CALL METHOD document->open_document
EXPORTING open_inplace = 'X'
open_readonly = 'X'
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ENDIF.
ELSE.
MESSAGE e005.
ENDIF.
WHEN 'SAVEAS'.
IF NOT document IS INITIAL AND NOT document->proxy IS INITIAL.
CALL METHOD document->proxy->save_as
EXPORTING prompt_user = 'X'
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ELSE.
MESSAGE e000.
ENDIF.
WHEN 'CLOSE'.
IF NOT document IS INITIAL.
CALL METHOD document->close_document
EXPORTING do_save = 'X'.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ELSE.
MESSAGE e000.
ENDIF.
WHEN 'COPYLINK'.
IF NOT link_server IS INITIAL.
PERFORM refresh_sales.
CALL METHOD link_server->execute_copy_link_dialog
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ELSE.
MESSAGE e004.
ENDIF.
WHEN 'REFRESH'.
IF NOT link_server IS INITIAL.
PERFORM refresh_sales.
ELSE.
MESSAGE e004.
ENDIF.
IF NOT document IS INITIAL AND NOT document->proxy IS INITIAL.
CALL METHOD document->proxy->execute_macro
EXPORTING macro_string = 'R3StartupMacro'
param_count = 1
param1 = 10
IMPORTING retcode = retcode.
CHANGING retvalue = usa_sales.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ELSE.
MESSAGE e000.
ENDIF.
WHEN 'PRINT'.
IF NOT document IS INITIAL AND NOT document->proxy IS INITIAL.
CALL METHOD document->proxy->print_document
EXPORTING prompt_user = 'X'
IMPORTING retcode = retcode.
CALL METHOD c_oi_errors=>show_message EXPORTING type = 'E'.
ELSE.
MESSAGE e000.
ENDIF.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
CLASS c_excel_document IMPLEMENTATION.
CLASS c_excel_document IMPLEMENTATION.
METHOD: constructor.
IMPORTING control TYPE REF TO i_oi_ole_container_control
document_type TYPE soi_document_type
me->control = control.
me->document_type = document_type.
ENDMETHOD.
METHOD create_document.
IMPORTING open_inplace TYPE c DEFAULT ' '
RETURNING value(retcode) TYPE t_oi_ret_string.
IF NOT proxy IS INITIAL.
CALL METHOD me->close_document.
ENDIF.
CALL METHOD control->get_document_proxy
EXPORTING document_type = document_type
IMPORTING document_proxy = proxy
retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
CALL METHOD proxy->create_document
EXPORTING create_view_data = 'X'
open_inplace = open_inplace
IMPORTING retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
SET HANDLER me->on_close_document FOR proxy.
SET HANDLER me->on_custom_event FOR proxy.
ENDMETHOD.
METHOD open_document.
IMPORTING open_inplace TYPE c DEFAULT ' '
open_readonly TYPE c DEFAULT ' '
RETURNING value(retcode) TYPE t_oi_ret_string.
IF NOT proxy IS INITIAL.
CALL METHOD me->close_document.
ENDIF.
CALL METHOD control->get_document_proxy
EXPORTING document_type = document_type
IMPORTING document_proxy = proxy
retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
CALL METHOD proxy->open_document_from_table
EXPORTING document_table = data_table
document_size = data_size
open_inplace = open_inplace
open_readonly = open_readonly
IMPORTING retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
SET HANDLER me->on_close_document FOR proxy.
SET HANDLER me->on_custom_event FOR proxy.
CALL METHOD proxy->update_document_links
EXPORTING update_manual_links = 'X'
IMPORTING retcode = retcode.
ENDMETHOD.
METHOD close_document.
IMPORTING do_save TYPE c DEFAULT ' '
RETURNING value(retcode) TYPE t_oi_ret_string.
DATA: is_closed TYPE i, has_changed TYPE i.
DATA: doc_url(256).
IF NOT proxy IS INITIAL.
CALL METHOD proxy->is_destroyed IMPORTING ret_value = is_closed.
IF is_closed IS INITIAL.
CALL METHOD proxy->close_document
EXPORTING do_save = do_save
IMPORTING has_changed = has_changed
retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
ENDIF.
IF NOT has_changed IS INITIAL.
CALL METHOD proxy->save_document_to_table
IMPORTING retcode = retcode
CHANGING document_table = data_table
document_size = data_size.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
ENDIF.
CALL METHOD proxy->release_document
IMPORTING retcode = retcode.
SET HANDLER me->on_close_document FOR proxy ACTIVATION ' '.
SET HANDLER me->on_custom_event FOR proxy ACTIVATION ' '.
ELSE.
retcode = c_oi_errors=>ret_document_not_open.
ENDIF.
ENDMETHOD.
METHOD open_document_url.
IMPORTING open_inplace TYPE c DEFAULT ' '
open_readonly TYPE c DEFAULT ' '
doc_url TYPE t_url DEFAULT ' '
RETURNING value(retcode) TYPE t_oi_ret_string.
IF NOT proxy IS INITIAL.
CALL METHOD me->close_document.
ENDIF.
CALL METHOD control->get_document_proxy
EXPORTING document_type = document_type
IMPORTING document_proxy = proxy
retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
me->doc_url = doc_url.
CALL METHOD proxy->open_document
EXPORTING document_url = doc_url
open_inplace = open_inplace
open_readonly = open_readonly
IMPORTING retcode = retcode.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
Document shall also be available in ITAB for respective operations:
CALL METHOD proxy->save_document_to_table
IMPORTING retcode = retcode
CHANGING document_table = data_table
document_size = data_size.
IF retcode NE c_oi_errors=>ret_ok.
EXIT.
ENDIF.
SET HANDLER me->on_close_document FOR proxy.
SET HANDLER me->on_custom_event FOR proxy.
CALL METHOD proxy->update_document_links
EXPORTING update_manual_links = 'X'
IMPORTING retcode = retcode.
ENDMETHOD.
METHOD retrieve_document.
importing documents type document_list
exporting document_format type soi_document_format
doc_url type t_url.
*----BDS-Data-Structures:--
Tables and WAs:
DATA: doc_signature TYPE sbdst_signature,
wa_doc_signature LIKE LINE OF doc_signature,
doc_components TYPE sbdst_components,
wa_doc_components LIKE LINE OF doc_components,
doc_properties TYPE sbdst_properties,
wa_doc_properties LIKE LINE OF doc_properties,
doc_uris TYPE sbdst_uri,
wa_doc_uris LIKE LINE OF doc_uris.
ID's:
DATA: doc_classname TYPE sbdst_classname VALUE 'SOFFICEINTEGRATION',
doc_classtype TYPE sbdst_classtype VALUE 'OT',
doc_object_key TYPE sbdst_object_key VALUE 'SOFFICEINTEGRATION',
doc_mimetype TYPE bapicompon-mimetype.
DATA: field_desc TYPE TABLE OF rsvbfidesc.
DATA: wa_field_desc TYPE rsvbfidesc.
DATA: l_nr LIKE sy-tabix.
CLEAR: field_desc, wa_field_desc.
wa_field_desc-fieldnum = 1.
wa_field_desc-display = 'X'.
APPEND wa_field_desc TO field_desc.
l_nr = 0.
CALL FUNCTION 'RS_VALUES_BOX'
EXPORTING
left_upper_col = 5
left_upper_row = 5
pagesize = 10
title = 'Select document'(sdc)
IMPORTING
linenumber = l_nr
TABLES
field_desc = field_desc
value_tab = documents
EXCEPTIONS
OTHERS = 1.
IF sy-subrc EQ 0 AND l_nr NE 0.
READ TABLE documents INDEX l_nr INTO descr.
IF sy-subrc EQ 0.
CLEAR: wa_doc_signature, wa_doc_components, wa_doc_uris.
CLEAR: doc_signature, doc_components, doc_uris.
wa_doc_signature-prop_name = 'DESCRIPTION'.
wa_doc_signature-prop_value = descr-document_id.
APPEND wa_doc_signature TO doc_signature.
CALL METHOD bds_instance->get_info
EXPORTING classname = doc_classname
classtype = doc_classtype
object_key = doc_object_key
CHANGING components = doc_components
signature = doc_signature
EXCEPTIONS nothing_found = 1
error_kpro = 2
internal_error = 3
parameter_error = 4
not_authorized = 5
not_allowed = 6.
IF sy-subrc NE 0 AND sy-subrc NE 1.
MESSAGE e016.
ENDIF.
IF sy-subrc = 1.
MESSAGE e017.
ENDIF.
CALL METHOD bds_instance->get_with_url
EXPORTING classname = doc_classname
classtype = doc_classtype
object_key = doc_object_key
CHANGING uris = doc_uris
signature = doc_signature
EXCEPTIONS nothing_found = 1
error_kpro = 2
internal_error = 3
parameter_error = 4
not_authorized = 5
not_allowed = 6.
IF sy-subrc NE 0 AND sy-subrc NE 1.
MESSAGE e016.
ENDIF.
IF sy-subrc = 1.
MESSAGE e017.
ENDIF.
READ TABLE doc_components INTO wa_doc_components INDEX 1.
READ TABLE doc_uris INTO wa_doc_uris INDEX 1.
doc_mimetype = wa_doc_components-mimetype.
doc_url = wa_doc_uris-uri.
CASE doc_mimetype.
WHEN 'application/x-rtf' OR 'text/rtf'.
document_format = soi_docformat_rtf.
WHEN 'application/x-oleobject'.
document_format = soi_docformat_compound.
WHEN 'text/plain'.
document_format = soi_docformat_text.
WHEN OTHERS.
document_format = soi_docformat_native.
ENDCASE.
ENDIF.
ENDIF.
ENDMETHOD.
METHOD on_close_document.
FOR EVENT on_close_document OF c_oi_ole_container_control
IMPORTING document_proxy has_changed.
DATA: answer, do_save.
IF has_changed EQ 1.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
titlebar = 'Office Integration Demo'(oid)
text_question = 'Save Document?'(sav)
display_cancel_button = ' '
IMPORTING
answer = answer.
IF answer EQ '1'.
do_save = 'X'.
ELSE.
do_save = ' '.
ENDIF.
CALL METHOD me->close_document
EXPORTING do_save = do_save.
CALL METHOD c_oi_errors=>show_message
EXPORTING type = 'E'.
ENDIF.
ENDMETHOD.
METHOD on_custom_event.
FOR EVENT on_custom_event OF i_oi_document_proxy
IMPORTING document_proxy event_name param_count
param1 param2 param3.
IF event_name EQ 'ON_SERIES_CHANGE'.
CALL METHOD table_coll->get_table
EXPORTING table_name = 'SALES_IN'
IMPORTING retcode = retcode
CHANGING data_table = test_table.
CALL METHOD c_oi_errors=>show_message
EXPORTING type = 'E'.
CLEAR wa_test_table.
READ TABLE test_table INTO wa_test_table INDEX 1.
usa_sales = wa_test_table-sales.
CLEAR wa_test_table.
READ TABLE test_table INTO wa_test_table INDEX 2.
europe_sales = wa_test_table-sales.
CLEAR wa_test_table.
READ TABLE test_table INTO wa_test_table INDEX 3.
japan_sales = wa_test_table-sales.
CLEAR wa_test_table.
READ TABLE test_table INTO wa_test_table INDEX 4.
asia_sales = wa_test_table-sales.
CLEAR wa_test_table.
READ TABLE test_table INTO wa_test_table INDEX 5.
america_sales = wa_test_table-sales.
CLEAR wa_test_table.
READ TABLE test_table INTO wa_test_table INDEX 6.
africa_sales = wa_test_table-sales.
CLEAR wa_test_table.
ENDIF.
CALL METHOD control->set_focus.
ENDMETHOD.
ENDCLASS.
FORM refresh_sales.
FORM refresh_sales.
DATA: BEGIN OF item_line,
region(60),
sales TYPE i,
date TYPE d,
time TYPE t,
weight TYPE f,
amount TYPE p DECIMALS 3,
id(10) TYPE n,
END OF item_line.
DATA: sales_table LIKE TABLE OF item_line.
DATA: wa_sales_table LIKE item_line.
DATA: fields_table TYPE TABLE OF rfc_fields.
DATA: wa_fields_table TYPE rfc_fields.
DATA: ind TYPE i.
CALL FUNCTION 'DP_GET_FIELDS_FROM_TABLE'
TABLES
data = sales_table
fields = fields_table.
READ TABLE fields_table INDEX 1 INTO wa_fields_table.
wa_fields_table-fieldname = 'Region'."#EC NOTEXT
MODIFY fields_table FROM wa_fields_table INDEX 1.
CLEAR wa_fields_table.
READ TABLE fields_table INDEX 2 INTO wa_fields_table.
wa_fields_table-fieldname = 'Sales'. "#EC NOTEXT
MODIFY fields_table FROM wa_fields_table INDEX 2.
CLEAR: sales_table, wa_sales_table.
wa_sales_table-region = 'USA'(usa).
wa_sales_table-sales = usa_sales.
APPEND wa_sales_table TO sales_table.
CLEAR wa_sales_table.
wa_sales_table-region = 'Europe'(eur).
wa_sales_table-sales = europe_sales.
APPEND wa_sales_table TO sales_table.
CLEAR wa_sales_table.
wa_sales_table-region = 'Japan'(jap).
wa_sales_table-sales = japan_sales.
APPEND wa_sales_table TO sales_table.
CLEAR wa_sales_table.
wa_sales_table-region = 'Asia'(asi).
wa_sales_table-sales = asia_sales.
APPEND wa_sales_table TO sales_table.
CLEAR wa_sales_table.
wa_sales_table-region = 'America'(ame).
wa_sales_table-sales = america_sales.
APPEND wa_sales_table TO sales_table.
CLEAR wa_sales_table.
wa_sales_table-region = 'Africa'(afr).
wa_sales_table-sales = africa_sales.
APPEND wa_sales_table TO sales_table.
CLEAR wa_sales_table.
LOOP AT sales_table INTO wa_sales_table.
ind = sy-tabix.
wa_sales_table-date = sy-datum + ind.
wa_sales_table-time = sy-uzeit + ind.
wa_sales_table-weight = 100000 * ind.
wa_sales_table-amount = 11111 * ind.
wa_sales_table-id = ind.
MODIFY sales_table FROM wa_sales_table INDEX ind.
ENDLOOP.
CALL METHOD table_coll->add_table
EXPORTING table_name = 'SALES_OUT'
table_type = table_coll->table_type_output
IMPORTING retcode = retcode
CHANGING data_table = sales_table
fields_table = fields_table.
CALL METHOD link_server->add_table_item2
EXPORTING item_name = 'Sales' "#EC NOTEXT
item_title = 'Car Sales Figures'(sal)
IMPORTING retcode = retcode
CHANGING data_table = sales_table
fields_table = fields_table.
CALL METHOD link_server->add_string_item
EXPORTING item_name = 'ChartTitle'
item_title = 'Chart Title'(ti0)
item_value = 'Car Sales by Region'(ti1)
no_flush = 'X'
IMPORTING retcode = retcode.
CALL METHOD link_server->add_string_item
EXPORTING item_name = 'ColumnTitle1'
item_title = 'Column Title 1'(ti2)
item_value = 'Region'(ti3)
no_flush = 'X'
IMPORTING retcode = retcode.
CALL METHOD link_server->add_string_item
EXPORTING item_name = 'ColumnTitle2'
item_title = 'Column Title 2'(ti4)
item_value = 'Sold Cars'(ti5)
no_flush = ' '
IMPORTING retcode = retcode.
ENDFORM. -
Where can I find the original album artwork for music not selling on iTunes
Last time I bought a single song that was out around a year ago .. And now I'm looking for the album artwork and it's gone .. This also happened with a song that was up just last week .. So since it's not in iTunes no longer .. I want to know where I can find the original artwork for the songs .. Please someone help ..
look the artwork up on google images, save it to your desktop. then right click the album in question and select get info. drag the artwork icon from your desktop into the box that says artwork.
-
Where can I find the old OS for my iPhone 3G?
Where can you find the old 3.1.1 software? (I assume that was its number)
The 4.0 is a disaster on mine. I still cannot get it to download any music. It keeps saying it cannot find the address. Yet iTunes plays the songs just fine.
At first my apps would crash everytime I loaded one. After the third time downloading the OS, they finally work. But this is the worst new OS update that Apple has ever given me.
I hope someone knows where I can find the old software because Apple doesn't publicize it.
Thanks very much.Search your computer for a file with iphone and 3.1.3 (or 3.1.1 or whatever you were running) in the filename and an extension of .ipsw. It might also be in the recycle bin. You can't do anything legitimate with the file, really, but it would be good to hang on to. Usually iTunes saves a restore to previous firmware file, but unfortunately all the ways for downgrading back to it have been closed over time by Apple because people have been exploiting them to "modify" their phones. But if you can find the file, move it to your desktop or someplace and sit on it until you find a way to restore that you're happy with.
-
how do I create playlists now of my downloaded music. Used to drag from "recently dowloaded" to playlist. Can't even find the dang songs!!!!!
However, my troubleshooting issue is that I also want the songs in my concert playlists to go in order of how they were performed at the concerts.
Give them a track number.
Each time I number them within the playlists the song's number also changes within the Library Music list.
And? I'm not seeing the problem.
However, I can not figure out how to make true copy. I've already tried dragging the song to my desktop, then dragging the new copy back into iTunes. I've even tried renaming the duplicate copy and dragging it into iTunes. Why won't my iTunes make an individual duplicate copy of a song?
How do you have iTunes manage your music? If you drag a song to the desktop it may just be moving the file to the desktop.
Command+R to reveal the file in Finder. Command+D to duplicate the file in Finder. Drag the duplicate to iTunes to add the second copy. Not that I totally understand where the issues lie and feel this is likely not the best remedy... -
How do i find the top songs on iTunes
now that i update itunes i cant find the top songs on itunes, can someone tell me where i can find them
Choose About iTunes from the iTunes menu, or control-click iTunes in the Dock, choose Show in Finder, and then Get Info.
(58536) -
Where I could find the sample code for Pan and Zoom?
hello all:
I saw a demo for showing how to implement Pan and Zoom in java. If I remember correctly it should be included in JAI, however I cannot find it in JAI sample demos any more.
THe only samples it included are
* JAIDemo
* JAIExampleApp/SampleDescriptor
* JAIFileBrowser
* JAIWarpDemo
* JAIImageReader
* FormatDemo
Does anyone know where I could find that demo back?
Thank you
-DanielHi,
I think this document will help you to develop your own modules.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f013e82c-e56e-2910-c3ae-c602a67b918e?quicklink=index&overridelayout=true
later version pi71
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0b39e65-981e-2b10-1c9c-fc3f8e6747fa?quicklink=index&overridelayout=true
regards,
francis
Maybe you are looking for
-
Setting up multiple actions in PS CS5.5 Mac
I cannot remember how to do this correctly, heres the steps. I know how to assign actions to one photo but how do I assign the same action to multiple photos as I can only get the actions to work on one opened photo at a time. I tried opening 2 or th
-
How can i load the Marketing Attributes of the Business partner into BI. Is there any standard data souce??? what does it load into, the BP object??? Thank you
-
Smooth conversion of SWF to AVI with Alpha Channel
today i tried a program which claims the unique program in the world can convert SWF to AVI with alpha channel, i find that this is the best program which can synchronization audio and video, and there won't be watermark in the middle of your video,
-
The latest available Oracle Service Bus is Release 11gR1 (11.1.1.7.0) , I am looking for 11.1.1.6.0, where can I find it? Thanks in advance. Kranti
-
Disable file deletion confirmation in Lion
How do I do this?