Where do I find the list that loads the programs at start-up so that I can disable some.

Where do I find the list that controls the program loading at start-up. Also how do I know which ones I can disable. I am trying to speed up the start-up process.

See http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx Autotruns

Similar Messages

TS2756 For a USB connection for a personal hotspot I am requested to "Choose iPhone from the list of network services". Where do i find this list?

For a USB hotspot connection I am requested to "Choose iPhone from the list of network services". Where do I find this list?

Perhaps it would be helpful for you to view the page source code of this page
http://www.alanwork.com/
As you can see, the submenu code links are immediately below the top level code, and are
wrapped in their own <UL> </UL> tag pairs.
Hope that helps

How do I Find The List Of All The Questions I have Asked?

Hello:
I have asked this question once before and someone was able to give me a link to my profile where I quickly found the list of all the questions I have ever asked on the forum.
I have not been on the forums for many months now and so I was just checking in and once again I cannot find that list of my questions.
Sure, I am over tired tonight but still ... I would think there would be a .... HERE'S ALL YOUR QUESTIONS YOU EVER ASKED ... button or what have ya
Can someone kindly point me to where in our Profiles the list of our questions is located? sure would great appreciate it a bunch.
Thanks for your time,
Kara

Click on your profile to get to https://forums.adobe.com/people/Kar209
Click on Content to get a list of all your topics: https://forums.adobe.com/people/Kar209/content
Click on Participated on the left to get anything you've ever posted: https://forums.adobe.com/people/Kar209/content?filterID=participated
[topic moved to Forum Comments forum]

How do i backup the list of load images automatically exceptions under Options- Content. I want to transfer to another comp without re-adding one at a time

How do i backup the list of load images automatically exceptions under Options->Content. I want to transfer to another comp without re-adding one at a time. EVen if there is no way to backup, what is the system file for Firefox that stores these, so i can transfer this file or open it in an XML or similar editor to copy them out?

The permissions.sqlite file stores 'allow' and 'block' exceptions for cookies, images, pop-up windows, and extensions (software) installation.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder
See also:
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

HT1420 where do i find authorize this comuter in the itunes store?

where do i find authorize this computer in the itunes store?

Hi upsops,
Press the Alt key to display the menu options:
http://support.apple.com/kb/HT5610
Then click on Store in the menu at the top. Authorize this Computer is under that menu option.
Cheers,
GB

TS3274 When viewing pick lists from different web sites my iPad2 selects the first choice on the list and loads it without allowing me to pick my option; is there a way to change this default?

When viewing pick lists from different web sites my iPad 2 (safari) selects the first choice on the list and loads it without allowing me to pick my option; is there a way to change this default?

With your playhead over the clip in the timeline and that V track's 'track selector' as the only one active...hit the 'f' key.
This will load the original clip into the viewer at the matching point of the frame in the timeline.
K

Firefox 10 Crashes occassionally when clicking on a picture on facebook that loads the new popup. Firefox just hangs and becomes unresponsive. Is there a fix for this?

When u click on a picture that loads the popup that Facebook has recently introduced on occasion Firefox just hangs and becomes unresponsive and has to be closed by using task manager. It doesn't happen every time say for every 2 out of 10.
This is what the error report says....
Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangB1
Application Name: firefox.exe
Application Version: 10.0.0.4411
Application Timestamp: 4f2548ce
Hang Signature: 4813
Hang Type: 0
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 2057
Additional Hang Signature 1: 4813d58d219b01045ae1404b21f04466
Additional Hang Signature 2: ec05
Additional Hang Signature 3: ec057c79f467a3033cec4ebe11500204
Additional Hang Signature 4: 4813
Additional Hang Signature 5: 4813d58d219b01045ae1404b21f04466
Additional Hang Signature 6: ec05
Additional Hang Signature 7: ec057c79f467a3033cec4ebe11500204

-> Provide your Crash IDs by using the suggestions mentioned in the following article:
* [[Firefox crashes#w_get-help-fixing-this-crash|Get help fixing this Crash]]

My system doesn not much the current uploaded software it shows on start up disk that i have mac os 1.8 where the system is asking for 1.77

my system doesn not much the current uploaded software it shows on start up disk that i have mac os 1.8 where the system is asking for 1.77. It doesn't allowe me to reinstal or access the drive>

I assume you don't have a backup on an external HD. You always should, because then you could easily fix your problem.
Boot in Safe Mode. See What is Safe Boot, Safe Mode? (Mac OS X)
http://docs.info.apple.com/article.html?artnum=107392 Takes a while to run, but it usually "fixes" problems.
Safe Boot takes longer than normal startup
http://support.apple.com/kb/TS1884?viewlocale=en_US
 Cheers, Tom

Premire pro quit unexpectedly - where do I find my saved renditions of the time line

Premiere pro quit unexpectedly - where do I find my saved renditions of the time line - thx

there is an auto-save, which can be set to save in my documents, along with the project files, or a custom location. if you need to search for them, they use the same name as your project file, but with -1, -2, -3, -4 etc at the end, for each revision. so if needed, you can do a search for your project file on your hdd till it finds the auto-saves.

How do you print the list of songs from a songlist in I-Tunes that you burn to a blank CD for the cover of a CD case?

How do you print the list of songs from a songlist in I-Tunes that you burn to a blank CD for the cover of a CD case?

Click the playlist in iTunes. Then go to File > Print ...
One of the options you will see to print is "CD Jewel Case Insert". That's just what you want!

Can i change the behavior of the character menu so that the list begins with the current font selected and not at the beginning of the list?

Im struggling with the way the font selection tab works in the character menu.
When i scroll down the list and select minion halfway down the list, the next time i click on the font tab, the list starts back at the top of the list making me scroll down the list every time i want to look for a font.
Can anyone offer some suggestions here?
thanks
jeff

You can't do it exactly the way you want, but if you have InDesign CC or CC 2014, you can set fonts in the Character panel or Control panel Type menu to be Favorites. Click the "star" beside a font to set it as a favorite. Then at the top of the menu, click the "star" filter to show favorites in your list instead of a list of all the fonts.

Invalid data has been used to update the list item. The field you are trying to update may be read only.

Trying to follow Serge Luca's Step by Step Tutorial. Creating Workflows for Windows Sharepoint Services and MOSS2007. http://sergeluca.spaces.live.com/blog/cns!E8A06D5F2F585013!859.entry
I have an onWorkflowActivated, followed by an ifElse condition and a log to history.
In the IfElse, each branch has a code segment, that trys to update the status column in the list that the workflow is attached to.
private void Authorize_ExecuteCode(object sender, EventArgs e)
// tried serveral methods
WorkflowProperties.Item["Status"] = "Automatically Approved";
// tried all of the following (one at a time)
item.update();
WorkflowProperties.Item.Update();
WorkflowProperties.Item.SystemUpdate();
//tried this as well.
Microsoft.SharePoint.SPListItem item = WorkflowProperties.Item;
item["Status"] = "Automatically Approved";
item.Update() ;
On the update call I keep getting "Invalid data has been used to update the list item. The field you are trying to update may be read only."
Could someone explain how to update "Status" column of the list item that the workflow is working on?
Thank you very much.
Bill

Hi:
you can do the following:
add the following code to the workflow.xml file (under the MetaData section)
Code Snippet
<ExtendedStatusColumnValues>
<StatusColumnValue>Branch1</StatusColumnValue>
<StatusColumnValue>Branch2</StatusColumnValue>
</ExtendedStatusColumnValues>
then add 2 SetState activities one in each branch of the IfElse.
for the code behind of setState1 (branch1) write the following code:
Code Snippet
state = Convert.ToInt32(SPWorkflowStatus.Max);
for setState2 (branch2) write the following:
Code Snippet
state = Convert.ToInt32(SPWorkflowStatus.Max) + 1;
where state is the variable assigned to the field State in the properties of the SetState(design lever), or instead of state u can use the following code:
Code Snippet
((SetState)sender).State
where sender is the object sent through the function parameter.
hope this answered your question
Best Regards

Invalid data has been used to update the list item. The field you are trying to update may be read only (Lookup Field).

Hi.
I am getting below error while adding value to look-up field.
Invalid data has been used to update the list item. The field you are trying to update may be read only.
I have tried many forums ans post but didn't come to know what's the root cause of issue. I am also posting Code for creating and adding lookup field.
CAML to create lookup field (It works Fine)
string lkproductNumber = "<Field Type='Lookup' DisplayName='Product Number' StaticName='ProductNumber' ReadOnly='FALSE' List='" + pNewMaster.Id + "' ShowField='Product_x0020_Number' />";
Code to insert value to lookup field
ClientContext client = new ClientContext(SiteUrl);
client.Load(client.Web);
client.Credentials = new NetworkCredential(this.UserName, this.Password, this.Domain);
// Lookup Lists
List pmList = client.Web.Lists.GetByTitle("Product_Master");
//List Conatining Lookup Columns
List piList = client.Web.Lists.GetByTitle("Product_Inventory");
client.Load(piList);
query.ViewXml = "<View/>";
ListItemCollection collection = pmList.GetItems(query);
client.Load(collection);
client.ExecuteQuery();
int prodid=0;
foreach (ListItem item in collection)
if (Convert.ToString(item["Product_x0020_Number"]) == ProductNumber)
{ prodid = Convert.ToInt32(item["ID"]); }
ListItem piItem = piList.AddItem(new ListItemCreationInformation());
piItem["Product_x0020_Number"] = new FieldLookupValue() { LookupId = prodid };
piItem.Update();
client.ExecuteQuery();
Exception Detail
Microsoft.SharePoint.Client.ServerException was caught
Message=Invalid data has been used to update the list item. The field you are trying to update may be read only.
Source=Microsoft.SharePoint.Client.Runtime
ServerErrorCode=-2147352571
ServerErrorTypeName=Microsoft.SharePoint.SPException
ServerStackTrace=""
StackTrace:
at Microsoft.SharePoint.Client.ClientRequest.ProcessResponseStream(Stream responseStream)
at Microsoft.SharePoint.Client.ClientRequest.ProcessResponse()
at WebServiceProviders.ClientServices.NewProductInventory() in Z:\.............ClientServices.cs:line 889
InnerException:
Quick response is highly appreciated.
Thanks
Mehar

Try some thing like below,
your data value that needs to be update should be in this format "ID of the lookup";#"Title of the Lookup"
For example,
listItem["Product_x0020_Number"]
= "1;#iPhone";
listItem["Product_x0020_Number"]
= "2;#Mobile";
Hope this helped you....

Help ! The 'list view' for the Calendar app. on my Ipod touch is haywire..

The 'list view' seems to be all wonky in Calendar on my iPod touch.
The dates for a given day that's displayed don't make sense:
i.e. Sunday Oct. 27 2030 followed by Saturday July 14 2001 followed by Tuesday Jan. 16 2001 are listed in consecutive order instead of today, tomorrow and next day (with correct dates).
Also, the 'events' given for each day listed don't make sense and are often duplicated.
The 'day' and 'month' views however, seem to be ok and not corrupted. The 'list' field in the month view also seems fine ?
Has anybody experienced this ? Very frustrating, since I like the list view.
I make most of my entries/changes to iCal on our main desktop (iMac 24") then sync. to my iPod. The list view seems ok on the desktop.
Any help greatly appreciated.
ps. not sure if the problem corresponded with an upgrade of the Ipod software to OS 3.1 from 2.x....
ipod touch 16 GB 2nd generation iPhone OS 3.1 iPhone OS 3.1.1 (7C145)

Attach the iPod and launch iTunes.
Select it and goto Info tab / Advanced.
Try using the "replace..." option and sync to see if it places the good data on there.

Need to update the list item in the same sharepoint list with particular condition with Sharepoint Designer 2013.

Hi All
I have one sharepoint list with huge data i.e with 20columns and more than 200 records with the fields .
Suppose lets consider there are A,B,C,D,E,F,G,H columns.
Now i want to create one form with the fields A,C,E.
When the user enter the existing data of list for columns A,C..based on C value the E column value should change and update that particular item in the list.
Please guide me without visual web part can we acheive this by Sharepoint designer 2013 or what would be the preferable solution.
Please help me on this as it is very urgent from me..
Thanks in Advance
Sowjanya G

Hi,
According to your post, my understanding is that you wanted to update the list item in the same sharepoint list with particular condition with Sharepoint Designer 2013.
I recommend to create workflow associated to the list and then start the workflow automatically when an item is changed.
In the workflow, you can add condition and actions as below:
If current item: C equal to Test1
Set E to Test2
Then the value of the filed E will be changed based on the value of the filed C.
In addition, if you create the form using InfoPath, you can add rule to the filed C as below:
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Display the current item in the list without advancing the iteration using

This is my directions.
Display the current item in the list without advancing the iteration using only iterator methods.
I can't seem to figure this one out when the only methods available are hasNext();, next();, hasPrevious();, previous();, add();, remove();. and set();, and nextIndex();. Can someone please give me advice on this one?
Thanks a bunch!!!!

After thinking briefly about an ugly megillah that would detect whether or not you've ever called Iterator.next(), which is what is required for a bulletproof solution, I've decided after looking at the documenation that in fact the problem is not valid.
It's as simple as this: the Javadoc says 'a ListIterator has no current element'.
Tell your professor.

Where do I find the list that loads the programs at start-up so that I can disable some.

Similar Messages

Maybe you are looking for