Where do I find username and password that ISP gave me???

I'm trying to connect my new laptop to my Linksys E4200, but I have long forgotten the username and password that the ISP gave me. How do I find them or reset them? I'm lost!!

Hi betsybrat,
The following link might help:
Checking the Linksys router’s wireless settings through the web-based setup page

Similar Messages

I have Iphone 4s, and the phone will activate itself again. How do I get changed Apple ID on my phone so that I get using the new username and password that is verified? I would like an answer as soon as possible ... Thank you very much.

I have Iphone 4s, and the phone will activate itself again. This I have verified, but when I shall put this onto my phone, so the phone will not approve the newusername and password. How do I get changed Apple ID on my phone so that I get using the new username and password that is verified? Silly to buy a new phone just for this .... The phone is almost three years old. How long can weexpect this to last? I would like an answer as soon as possible ... Thank you very much.

It sounds like your device might be in Activation Lock. Is it asking your to enter in an Apple ID & password, but only showing you the first letter of the email address and then some dots? Example: j•••••@icloud.com?
If so, do you recognize that email? Do you have an Apple ID that fits the same format? If so, then go to www.cloud.com, log in with that Apple ID & password, and see if under Find My iPhone it shows this device. If so, turn off the device, then remove the device from the list.

I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

How to retrieve username and password that I have created in YouTube app in iPhone?

I found out that YouTube in safari and YouTube app in iPhone it self are different thing. So I have created a username and password in YouTube app. Both username and password I have forgotten. How to retrieve my username and password?? I can't use the playlist without the username and password. Please help.

Hi I'm having the same problem. Did u find a solution?

How do I change a previously saved (in Firefox) online username and password that has now changed?

I try to navigate to the login OR homepage of a password protected site and it sends me into a loading loop or "invalid user name" error page (depending on which portal I attempt to enter through). How do I reset the username and password saved in Firefox? I tried deleting the sites and associated passwords in the security options tab already and it hasn't worked.

Arantha,
Click the document name at the top of the Pages window and choose Browse Versions. See if any of your late changes are there. Also, use Finder to search for files with a similar name, since it's possible that your latest changes were made to a copy of the document and you may be able to find that copy if that's the case.
Jerry

Hi, I can't get Firefox to ask me if I want it to remeber username and passwords that I type in when using client accounts in a system i am using at work, seems to do this only for some and not all entries.

I have read and tried the solutions posted under these links, but it is not solving the issue.
http://support.mozilla.com/en-US/kb/make-firefox-remember-usernames-and-passwords?s=how+to+save+password&r=1&as=s#w_make-firefox-remember-usernames-and-passwords
http://support.mozilla.com/en-US/kb/Username%20and%20password%20not%20remembered

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
To see all History and Cookie settings, choose:
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Deselect (Fx 8): [ ] "Always use private browsing mode"
*Deselect (Fx 3): [ ] "Automatically start Firefox in a private browsing session"

HT1338 how can i find username and password for MobileMe ?

please let me know which username and password should use for Mobileme.

MobileMe is closed; if you had an account and did not migrate it to iCloud it's lost. If you migrated it to iCloud the login is your @me.com email address and the password is what you chose.
If you never had a MobileMe account (and paid for it prior to June last year) the situation does not arise - you may have come across some old documentation encouraging you to sign up, but this is no longer possible.
You can open an iCloud account for free, which will give you email and syncing facilities:
Get Started with iCloud

How to find username and password of Admin Console

Hi all,
I had forgetton my username and password of Admin Console.Can any bodies help me how to search or recover it.
Thanks in advance
Sanjay

Hi,
Please go through the FAQ titled "Working with Deployment Servers" which is available at:http://developers.sun.com/prodtech/javatools/jscreator/reference/faqs/technical/depsrvs/
Hope this helps.
RK

Linksys EA3500 cannot find username and password

I have tried everything for hours today and nothing works. I have tried the admin and blank approach, I have tried using my router name and password when you 1st connect and got nothing.I have held the reset button for a minute straight to try and restore default settings and have got nothing. I'm trying to enter my ISP into the web browser and enter the info there if that helps at all. I'm all out of ideas and the very vague instructions that lead you in a huge circle has not helped.

I suggest, you do reset it again. Hold the reset button manually for 30sec; make sure you'll get the power light flashing before letting it go then unplug/re-plug the power cord. Try to login again. By the way, is the internet working through the router already?

How to find username and password

Hi,
Thanks for any help you guys can give me. I'm trying to setup the e-mail on my pearl and it says I already have a username and passwordm but I don't know what they are and don't remember setting it up. I tried calling sprint, they had me call Blackberry, but for some reason when I try to type the options in the menu says it doesn't take me to the next menu. Anyway, thanks again if someone knows how I can go about getting this taken care of.

Hi!! Your carrier should provide you the user name and password...only if the device belongs to you and you've forgot the user name/password. Some sort of ID check will be performed by the carrier. This is the practice which is being followed my carrier...
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

HT3728 how do i reset up my macbook username and password the computer has been cleaned out and reset to original factory settings

I just had my macbook pro cleaned out and restored to it's original facory settings. i cannot access set up assistant to configure my username and password for the computer. it does not recognize my old username and password and I can't find where to enter this information.

Unless you erased the drive then reinstalled Mavericks you will not see the Setup Assistant to configure your initial admin account. I have no idea just what you did. But to reset to factory state means you had to first install the version of OS X that came with the computer on the gray labeled DVDs. For your model that would have been a version of Leopard. If you have a Snow Leopard DVD then you can use that instead. The process is:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Once you have 10.6.8 running you can enter the App Store with your Apple ID and re-download Mavericks to upgrade to 10.9.2.

Changing DB username and Password for APEX

Hello Guys:
My APEX application is currently connected to the Main database, and now the business decided they want a user to be created with the main database only for APEX.
My main database is called ARRA, and user within the ARRA schema called ARRAAPEX was created given a diffrent username and password.
I see in the Administrative services I can only tell it to which schema to connect to, but where do I specify the username and password for the database user to be used by APEX?
Thank You For Your Help
Adel

Thank You for your reply Roel. What I meant to say is Logging to the ARRA schema using the username and password associated with ARRAAPEX would allow me to see the Date last edited field that has been added to the ARRAAPEX. ANd I am not able to see that at this moment becuase I am logging to to ARRA using the ARRA username and password.
When we setup a workspace and then associate a schema with that workspace, where do I specify the username and password that the workspace should use to access the schema? Or if a username and a password are not needed then how does the workspace access the schema?
Thank You
Adel

Checkin for a specific username and password

i have an html page where i enter username and password..now if i want that for a specific username and password only the next page say next.html is displayed otherwise the same page is diaplayed sayin that the usrename and password is to be reenterd...how can i do this servlets..also do tell me where to store the username and password

I am sorry, I lost some code in cut and pasting it
import java.io.*;
import java.sql.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class LoginServlet extends HttpServlet{
        private Connection con;
        private PreparedStatement pstmt;
        private Statement stmt;
        private ResultSet rs;
        private String pass = "";
        private String login,password,done;
        private HttpSession session;
        public void doPost(HttpServletRequest request,HttpServletResponse response)
        throws ServletException, IOException{
                login = ""+request.getParameter("login");
                password = ""+request.getParameter("password");
                done = ""+request.getParameter("done");
                session = request.getSession(true);
                PrintWriter out = response.getWriter();
                try{
                        Class.forName("oracle.jdbc.driver.OracleDriver");
                }catch(Exception e){
                        out.println(e.getMessage());
                try{
                        con = DriverManager.getConnection("jdbc:oracle:thin:scott/[email protected]:1521:csapw");
                        if(!(password.equals("")&&login.equals(""))){
                                pstmt = con.prepareStatement("select password from logon where login = ?");
                                pstmt.setString(1,login);
                                rs = pstmt.executeQuery();
                                                     pass = "";
                                while(rs.next()){
                                        pass = rs.getString(1);
                                if(pass.equals(password)){
                                        session.setAttribute("login",login);
                                        if(done.equals("null")){
                                                done = "";
                                                pass = "";
                                                response.sendRedirect("/ksenji/quiz2/shoponline.jsp");
                                        }else{
                                                response.sendRedirect(done.substring(5));
                                else{
                                        response.sendRedirect("/ksenji/quiz2/login.jsp?"+done);
                        else{
                                response.sendRedirect("/ksenji/quiz2/login.jsp?"+done);
                }catch(SQLException ex){
                        out.println(ex.getMessage());

APEX is running. I'm at the login page. Now I can't remember my admin username and password

After hours upon hours of finding fixes to get Oracle Application Express running, I am now on the verge of finally getting the test environment setup. In the frustration, I have now forgotten my username and password that I had when I created the thing.
Help?
BTW, is my default workspace called "Internal?"

login with sys account over installation folder..
e.g C:\apex>sqlplus
connect:sys/xe@xe as sysdba
SQL:>@apxchpwd
You can reset ADMIN password(e.g Apex_4.2)

Security issue: parameters username and password in the jbo:ApplicationModule

Hello,
in the <jbo:ApplicationModule> tag, you can give parameters for username and password, Then the .jsp connects to the DB via the username/password. Alternativly, You can provide this within the <Module>.properties file.
Now the question: Isn't this a security hole? I mean, is it under all circumstances impossible, that the source-code can be delivered by the web-server or that the byte-code from the servlet (compiled from .jsp) can be "restringed"?
Are there other ways to protect the credentials for accessing the ORACLE DB?
Michael

Hi John
thank You very much. You wrote
BC4J provides a number of mechanisms for specifying the DB username and password that do not require
the password to be stored in a JSP page. By default, in 9.0.2, the DB password is stored in
a BC4J configuration (persisted in a bc4j.xcfg file), which should be secured at the customer site. I've forgotten to mention our environment is SuSE7.2, DB 8.1.7.3, iAS 1.0.2.2, Portal 3.0.9.8.
For simplicity we would like to use the first method via bc4j.xcfg, But our bc4j.xcfg looks as follows
<quote>
<BC4JConfig>
<AppModuleConfigBag>
<AppModuleConfig name="OPKv1ModuleLocal">
<ApplicationName>de.condor.OPKv1.OPKv1Module</ApplicationName>
<DeployPlatform>LOCAL</DeployPlatform>
<JDBCName>WEBAPP_NETx</JDBCName>
<jbo.project>de.condor.OPKv1.opkv1PRJ</jbo.project>
</AppModuleConfig>
</AppModuleConfigBag>
</BC4JConfig>
</quote>
So the question is, where to leave schema/password?JDeveloper should have also generated a connection description in the same file named WEBAPP_NET. This
named connection should contain the relevant elements. It is not recommended that you edit this file directly. The
configuration editor and/or the connection editor should be used instead.
Hope this helps.
JR

Where do I find username and password that ISP gave me???

Similar Messages

Maybe you are looking for