Where do I get detailed instruction for installing 5 discs of a comb. P/shop & Pr. Elements 10 pack?

* I have purchased a combined Photoshop Elements 10 & Premiere Elements 10 pack (5 discs but they do not say which is what).
* I installed the 1st disc on my Dell Studio 1555 (with Windows 7 Home Premium 64-bit) as the Photoshop Elements 10 disc 1 - and entered the serial no. which it accepted. I finished the installation (it did not ask for the 2nd disc to be inserted to continue installation).
* Then I tried to install the 2nd disc but it asks me to remove the 1st disc installation including the serial no. How do I progress from here now? I intend to install all 5 discs in this computer.
Can someone please help? Kindly take into account my specific case and tell me the way forward.

Sorry, did not see your reply until today.
To answer your question, I am not quite there yet (only because I have not tried it yet but I hope to do so now).
I have now installed pse 10 from disc 1 and pre 10 from disc 2 as well as disc 4 for contents (windows) onto my Dell Studio laptop (have'nt tried them yet though).
Now I wish to deactivate both the softwares on this laptop and install these onto my Dell Vostro laptop and imac.
This time I intend to install both pse 10 (32 bit) and pre 10 (64 bit) from disc 2 (I understand that - please correct me if I am wrong -  that disc 2 contains just these two softwares) onto the Dell Vostro laptop which has Windows 7 Pro (64 bit). Then of course I install disc 4 for contents. I hope it will go ok.
To deactivate these on my first laptop I understand that I shall have to launch each program, click 'new project' and give a name, click 'help' in the top menu on the editor screen and then click 'deactivate'.  This is what you had described to me earlier for pre 10, but is this also true for pse 10?
Sorry for asking questions that are probably no problems to most guys.  Thanks.

Similar Messages

  • I AM NEW TO BI ,WHERE I WILL  GET  DETAIL  INFO  FOR  'USEREXIT'

    HI ALL,
    I AM NEW  TO BI WHERE I WILL GET ALL DETAILS ABOUT USEREXITS.
    AND HOW TO WRITE SIMPLE USEREXIT....I.E SOME EXAMPLE RELATED TO IT..

    Check this program for Finding User Exit.
    Pass the transaction Code in the section Screen of the Program.This program outouts all exits related to TC given in sel screen
    Report
    tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
    tables : tstct.
    data : jtab like tadir occurs 0 with header line.
    data : field1(30).
    data : v_devclass like tadir-devclass.
    parameters : p_tcode like tstc-tcode obligatory.
    select single * from tstc where tcode eq p_tcode.
    if sy-subrc eq 0.
      select single * from tadir where pgmid = 'R3TR'
                                   and object = 'PROG'
                                   and obj_name = tstc-pgmna.
      move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
        select single * from trdir where name = tstc-pgmna.
        if trdir-subc eq 'F'.
          select single * from tfdir where pname = tstc-pgmna.
          select single * from enlfdir where funcname = tfdir-funcname.
          select single * from tadir where pgmid = 'R3TR'
                                       and object = 'FUGR'
                                       and obj_name eq enlfdir-area.
          move : tadir-devclass to v_devclass.
        endif.
      endif.
      select * from tadir into table jtab where pgmid = 'R3TR'
                            and object = 'SMOD'
                            and devclass = v_devclass.
      select single * from tstct where sprsl eq sy-langu and
                                       tcode eq p_tcode.
      format color col_positive intensified off.
      write:/(19) 'Transaction Code - ',
           20(20) p_tcode,
           45(50) tstct-ttext.
      skip.
      if not jtab[] is initial.
        write:/(95) sy-uline.
        format color col_heading intensified on.
        write:/1 sy-vline,
               2 'Exit Name',
              21 sy-vline ,
              22 'Description',
              95 sy-vline.
        write:/(95) sy-uline.
        loop at jtab.
          select single * from modsapt where sprsl = sy-langu and
                                             name = jtab-obj_name.
          format color col_normal intensified off.
          write:/1 sy-vline,
                 2 jtab-obj_name hotspot on,
                21 sy-vline ,
                22 modsapt-modtext,
                95 sy-vline.
        endloop.
        write:/(95) sy-uline.
        describe table jtab.
        skip.
        format color col_total intensified on.
        write:/ 'No of Exits:' , sy-tfill.
      else.
        format color col_negative intensified on.
        write:/(95) 'No User Exit exists'.
      endif.
    else.
      format color col_negative intensified on.
      write:/(95) 'Transaction Code Does Not Exist'.
    endif.
    at line-selection.
      get cursor field field1.
      check field1(4) eq 'JTAB'.
      set parameter id 'MON' field sy-lisel+1(10).
      call transaction 'SMOD' and skip first   screen.
    Cheers,
    Manoj.

  • Does anyone know where I can get Operating Instructions for the Sony BVW-75 Betacam SP?

    I have been trying without success to find Operating Instructions for the Sony BVW-75 Betacam SP I just bought. Does anyone know where I can get it?

    Thank you for trying to help. All of those links are for the product brochure, service/maintenance manual, or other products. I have spent several hours following Google search results and eBay searches with no luck. That's why I am reaching out to the technical community to see if someone has an instruction manual somewhere in the back room of their studio.

  • Where can I find detailed instructions for adding updated firmware from my computer to my Canon 6D?

    I have downmloaded the latest firmware for my Canon 6D to my computer. I cannot find detailed instructions to add the firmware to my camera. Do I use the USB port and cable from the computer to the camera? It must be simple but I cannot seem to find instructions and I do not want to make a mistake.
    thank you

    From the download site:
    Firmware changes:
    Firmware Version 1.1.4 incorporates the following fixes:
    1. Fixes a phenomenon in which some images cannot be transferred to mobile devices running the EOS Remote app.
    2. Corrects an error in the German language Feature Guide.
    3. Corrects an error in the Korean language Feature Guide.
    Firmware Version 1.1.4 is for cameras with firmware up to Version 1.1.3. If the camera's firmware is already Version 1.1.4, it is not necessary to update the firmware.
    Please note:
    After the firmware update has been performed the following setting will be reset to default.
    Menu > Custom Function> C.Fn II: Autofocus > AF Microadjustment> 1: All by same amount
    When updating the firmware of the camera, please review the instructions thoroughly before you download the firmware.
    Q&A:
    Preparations for a firmware update:
    Windows
    After the downloaded compressed file (.zip file) is extracted, a firmware folder is created.
    *Extracting the downloaded file:
    Right-click the zip file, and then select Extract All to extract the file.
    The extracted folder contains the firmware (File name: 6D000114.FIR, File size: 21,276,940 bytes) and instructions on the firmware update procedures (a PDF file in five languages: Japanese, English, French, Spanish, and Simplified Chinese).
    Before starting the firmware update operations, please confirm the contents of the download, and carefully read through the firmware update procedures.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • Where can I get BASIC instructions for CS5?

    Is there a manual? The video tutorials are much too advanced for me.

    As Peter says, the CS4 version should do for you. The difference, of course, is the lack of reference to CS5 features. But since you are asking for basic help, then the core features you need the most instruction with are essentially unchanged. As a book for a now obsolete program, the CS4 version can probably be bought at a discount (I have not searched) or might be available at your library.
    I would also like to thank you for not just burying the forum with a bunch of questions on how to accomplish specific basic tasks. I love to answer questions here (hence over 3,000 posts), and I often learn a lot by trying the solutions before posting them. I even don’t mind answering the occasional basic question. But when the same user keeps asking for help with the simplest tasks, I can get a little… abrasive. Those people should be seeking the very help for which you are asking.

  • Where can I get installation instructions for older Sony electronics?

    I would like to have diagrams, wiring schematics, parts and accessaries lists for a CDX-GT40W cars stereo and a EXCD-3RF CD changer.

    We only have the CDX-GT40W operating instructions available. You can visit http://www.scosche.com/  for INSTALLATION ONLY. 
    If my post answers your question, please mark it as "Accept as Solution"
    http://bit.ly/Win-4K

  • I'm finding Ios7 exceeding frustrating having to spend hours reinstalling and looking for last data. For example I cannot delete photos I have synced, applications are missing. Where can I get clear instructions to fix the mess?

    Where can I get clear instructions to clean up a mess that Ios7 has made of my data and info on my iPad. I can't delete photos, apps are missing, it's crazy and so frustrating. I have spent hours on this.

    How did the photos get onto your iPad ? If they were synced from a computer then they can't be deleted directly in the iPad's Photos app - instead they are deleted by not including them in your next photo sync from your computer's iTunes.
    For your apps, as long as they are still in your country's store then you should be able to redownload them via the Purchased tab in the App Store app on your iPad, and via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes. If you had backed up to your computer's iTunes before starting the update then you could redownload them to your computer's iTunes and then retry restoring to your backup and see if that copies the apps and their content back (the actual apps aren't included in a backup, just their content/settings, so for a restore to work fully you need to have the relevant apps in the Apps part of your library).

  • Basic instructions for installing Air?

    Hi
    I'm use Flash CS5, and want to learn Air.
    I installed Air 2.5.
    Do I need to istall the SDK?  If so, where do I put it, and how do I set it up?
    What is the difference between the runtime and sdk?
    Thanks for your help.
    Shaun

    Hi Shaun,
    Thanks for showing interest in AIR 2.5.  To start, it sounds like you've installed the AIR 2.5 runtime, which by itself will let you install and run AIR applications on your computer.  To start developing, you'll need to get the latest SDK.  You can grab a copy of this for Flash CS5 here:
    Adobe Flash Professional CS5 Extension for AIR 2.5
    There are instructions for installing at the bottom of the page, along with a link to the beta forum.  I'd also like to encourage you to check out the Adobe AIR Quick Starts for Flash Developers, the video tutorial series Designing an AIR Application, and the pdf Developing Adobe AIR 1.5 Applications With Adobe Flash CS4 Professional.  While the video series and the pdf are a bit dated, they still contain great information and you can information on the latest 2.5 API's on our Adobe AIR Developer site.
    Hope this helps,
    Chris

  • Where can I get the driver for my HP DE8A4L external USB CD/DVD drive?

    Where can I get the driver for my HP DE8A4L external USB CD/DVD drive? 
    On the label it says, Model HSTNN-PD06-91
    and
    HP PN: 518819-001 Rev.B
    I've had my Mini 110-1000 running our music system for a couple of years, no complaints.  When I wanted a CD/DVD drive, I purchased a DE8A4L external USB drive directly from HP.  It didn't come with a driver disc.  When I plug it in, the USB subsystem does not enable it.  Device Manager shows a yellow exclamation point, saying, "Windows cannot load the device driver for this hardware..."   It is running Windows XP Home Edition SP3.
    What gives with this device?

    Following up on tactic 2) above, I upgraded the BIOS from version F07 to the latest version available on the HP download site, version F19.  This went well, but unfortunately the system still does not recognize the device.
    When I try to Device Manager, and select the DE8A4L DVD device, and try "search for a device driver", it says it cannot find a better match for the driver already installed.
    This Mini 110-1000 only came with 1 Gb RAM, and Windows XP Home.   Is one of these a critical limitation for running an external USB DVD drive?

  • Where can i get transport file for bc400's template programs to import

    hi
    where can i get transport file for bc400's template programs to import to miniwas
    would like to do the exercises for tw10 and tw12
    regards
    jan

    Thanks Spencer.
    I downloaded it, etc. and that didn't work. 
    It actually seems to work the same way as before I downloaded that driver, meaning, it prints but leaves it in the "# Document Pending" status.
    Since the wireless HP print server isn't working (No connectMgr.exe file) there's no connection and therefore the doc won't print.
    RE: Print/Server software out of date.  The software was working for many months after originally installing it on this laptop.  Then it just stopped.  Now it can't find the .exe file and that's odd.  
    If I could find that file I could just save it where it needed to be and I'd be good to go.
    Thanks for the help.
    Going to uninstall and reinstall again, just for fun.  I'll report back.
    J

  • I recently continued my subscription. Where do a get an invoice for my payment from?

    I recently continued my subscription. Where do a get an invoice for my payment from?

    Hi michaels38928159,
    Please refer the KB doc link mentioned below and follow the instructions to find your payment invoice/receipt:
    Print a payment receipt or invoice | Creative Cloud
    Let me know if you have further queries.
    Regards,
    ~Anubha

  • Hi, I had Adobe Acrobat Professional 10 64bit on my laptop which crashed, and I had to start fresh.  Where do I get the software to install again?  Thanks.

    Hi, I had Adobe Acrobat Professional 10 64bit on my laptop which crashed, and I had to start fresh.  Where do I get the software to install again?  Thanks.

    Hi Jerry,
    Thank you for posting on the Adobe Forums, Acrobat is a 32 bit application.
    You can download it from the below mentioned URL
    Download Acrobat products | Standard, Pro | XI, X
    Thanks,
    Vikrantt Singh

  • I have iPhone 3G 8Gb with iOs 4.2.1 how can i download  skype,viber,temple run of old version??? where do i get these apps for my iPhone

    I have iPhone 3G 8Gb with iOs 4.2.1 how can i download  skype,viber,temple run of old version??? where do i get these apps for my iPhone

    You don't. The only place to obtain apps for any iPhone is the app store. However, most, if not all of those apps won't run/install on an iPhone 3G. iOS 4.2.1 is the end of the line for your phone & most developers no longer support it.

  • Anywhere know where i can get windows 7 for bootcamp for cheap

    i want to game. know where i can get windows 7 for cheap

    Some games work fine in Virtualbox, which itself would save money since there is less risk of losing data than installing Boot Camp.  Regardless before you install anything backing up is essential.   Many games are available for the Mac through CrossOver which itself is cheaper than a fully licensed Windows.  See my FAQ * http://www.macmaps.com/macgamepages.html
    Lastly, what country are you from?  The cost of Windows varies worldwide.

  • Need Instructions for installing AE card in dual G5 tower

    I need instructions for installing a AE card in a dual 2 GHZ powermac G5. I understand I need to also install an external antenna. Since I do not have an antenna where is the best source for the antenna, apple or an outside vendor. My G5 is presently connected to a netgear router and I want to use the AE card to communicate with an airport express base station with airtunes connected to my stereo receiver. Would this create a conflict since my computer is connected to the netgear router. Any help would be appreciated.
    ron

    ] I need instructions for installing a AE card in a dual 2 GHZ powermac G5.
    http://www.info.apple.com/usen/cip/pdf/g5/apec_c.pdf
    ]I understand I need to also install an external antenna. Since I do not have an antenna where is the best source for the antenna, apple or an outside vendor.
    You are going to need the t-shaped external aerial otherwise this is not going to work. Even though your PowerMac did not come with an Airport Extreme Card built in, it would have been supplied with the aerial.
    You will need to find a replacement.
    ]I want to use the AE card to communicate with an airport express base station with airtunes connected to my stereo receiver. Would this create a conflict since my computer is connected to the netgear router.
    I am presuming that your Netgear is not wireless.
    Can you connect the Airport Express to the router are do you want it in a different room?
    You will be able to be connected to the router and AX at the same time, but in order to avoid internet and network issues, you should ensure that built-in-ethernet is above Airport in the network configurations.

Maybe you are looking for