Where do I get JRE?

Hello,
I downloaded the 815shipstd.* files and unpacked them
successfully. However, the installer uses a version of JRE that
seems to be different from the only one out there for Linux
(RedHat 6.0) that I could find.
Where can I download the version the installer expects? I can't
find it anywhere on the Oracle FTP site, and searching the Web
site got me nowhere. All of the installation instructions assume
you have the CD, which apparently has more files on it than are
included in the FTP archives.
null

Dejo (guest) wrote:
: Kevin Johnson (guest) wrote:
: : Dan Wilga (guest) wrote:
: : : Hello,
: : : I downloaded the 815shipstd.* files and unpacked them
: : : successfully. However, the installer uses a version of JRE
: that
: : : seems to be different from the only one out there for
Linux
: : : (RedHat 6.0) that I could find.
: : : Where can I download the version the installer expects? I
: can't
: : : find it anywhere on the Oracle FTP site, and searching the
: Web
: : : site got me nowhere. All of the installation instructions
: : assume
: : : you have the CD, which apparently has more files on it
than
: are
: : : included in the FTP archives.
: : 1.Download and install JRE 1.1.6 v5 from
: : http://www.blackdown.org. Install the JRE in any directory
and
: : create a symbolic link from /usr/local/jre to
: : <jre_install_location>/jre116_v5.
: : IT will be easier just to install it in the /usr/local/jre
: : directory from the get go. Instead of making the link.
: : This information is in the release guide for 8.1.5. I would
: : suggesst that you read all of the release note before trying
: the
: : install.
: Where exactly at the www.blackdown.org site is the JRE 1.1.6
v5?
: A complete URL would be nice. All I could find was links to
: mirror sites.
Hi!
Try connect to:
ftp://ftp.infomagic.com/pub/mirrors/linux/Java/JDK-
1.1.6/i386/glibc/v5/jre_1.1.6-v5-glibc-x86.tar.gz
Eugene
null

Similar Messages

  • Where do I get the oracle.jsp.dbutil library

    Where do I get the oracle.jsp.dbutil library.
    Thanks

    Bernhard (guest) wrote:
    : thanx for the advice. I think the links you posted will be
    : helpful in the future.
    : I found the source of my troubles on the SUSE homepage (ver 6.1
    : does not use glibc 2.1).
    : So now I needto find out how to upgrade to glibc 2.1
    Upgrading to SuSe 6.2 would probably do the trick. Upgrade is
    really smooth, and will take approximately 1h. I was able
    to run oracle 8i client install on my PC and it works (32M,
    160MHZ pentium) quite satisfactory. On my server machine
    (450MHZ, 128MB) I'm running RH 6.0 and it also works fine.
    On SuSe, I removed the "Kaffee" JVM installed by default and
    downloaded JRE 1.1.7 from www.blackdown.org. I haven't tried
    the "kaffe" engine but Oracle documentation requires blackdown.
    Michael, if you read this, have you tried installing with the
    default JVM engine delivered with SuSe 6.2?
    As long as your operating system name doesn't start with "MS"
    you should be OK.
    : But first I will buy me a book about LINUX administration and
    : hope to find the time reading it.
    : Colin. (guest) wrote:
    : : Bernhard (guest) wrote
    : : : But anyway: This is my first try to install anything on
    : LINUX.
    : : : If anybody has some good advise for a rookie re.
    : installation
    : : : of ORACLE SERVER 8.15 on Linux I would be very thankful.
    : : Try these links, there's lots of good tips to be found (and
    : : thanks to the authors of these sites).
    : : => A SuSE developers home page for Oracle.
    : : www.suse.de/~mha/oracle/
    : : => Install Guide for Redhat.
    : : jordan.fortwayne.com/oracle/
    : : => Oracle tips & scripts
    : : www.akadia.com/html/dod-frame.html
    : : amoeba.sagemediagroup.com/oracle_linux_howto/
    : : www.orafaq.org/
    : : www.oracle-dba.com/
    : : www.kevinloney.com/
    : : www.bf.rmit.edu.au/~orafaq/contents.html
    : : www.lazydba.com/
    : : www.dbasupport.com/
    : : www.dbspecialists.com/
    : : altern.org/place4oracle/oracle_contents.html
    : : www.dbdomain.com
    null

  • Where can i find JRE Version 1.4.1_02

    Please do let me know where i can find JRE Version 1.4.1_02

    Hmmmmm.....
    The link that was provided in the 13-Oct-2004 response, (two years ago) still seems to work.
    It gets you to downloads for Windows, Linux, Solaris(SPARC), and Solaris(x86).
    It has the JRE, it has the SDK, it has instructions for each,
    and it has their licenses.
    It even has a couple of Solaris patches.
    Rather than just ask again, did you even try that link ?

  • Where can I get more information on Cryptography Extension ??

    Hi.
    Does anyone know how to set up the Jarsafe product ?
    Another thing is, how to set security for the Cryptography Extension ??
    can anyone tell me where can i get more information on this ??
    Thank you.

    You need to download the JCE 1.2.1 that is available on the http://java.sun.com website. Once you download the software, you need to make the jar files available. It is easiest to place the JCE jar files in the extension mechanism folder since permission has already been granted, by default, to any code in that folder. That folder is JAVA_HOME\lib\ext on Windows. JAVA_HOME is where the Java Runtime Environment is installed.
    When using JarSafe with Java Web Start, make sure that the JCE jar files are placed in the extension mechanism folder of the JRE that Java Web Start is using.

  • Where can I get Jaws.jar from Sun?

    Where can I get Jaws.jar from Sun?
    thank you.
    while I use seach in download I do not find it.

    // new class for jsObject!!!! since 1.4.2 compile this:
    // javac -classpath "C:\Program Files\Java\j2re1.4.2_01\lib\plugin.jar" test.java
    // since jaws.jar does not exsist anymore
    // to compile with jaws: javac -classpath "C:\j2sdk1.4.0_03\jre\lib\jaws.jar" test.java
    http://www.tek-tips.com/faqs.cfm?fid=5101

  • Any one can show me where to find the JRE for MAC?

    I am trying to develop an application to run on PC and MAC. For PC, I can easily get the JRE to run it. But for MAC, what can I found is only MRJ 2.2.5. If I not wrong, I found that I can only run the applet(unable to support the SWING) but not the application. Anyone know where can I get the JRE for MAC which can run the application (same as the JRE1.3 for PC )
    There are a few MAC which has different OS. All of these MAC are too old to upgrade with latest OS so I cannot have the latest JAVA 2 technology support which is integrated in the latest OS. The MAC are running with OS 7 and OS 9 so anyone can tell me where to get the JRE that able to run the application that develop by using the JAVA 2?

    You probably already looked at
    http://devworld.apple.com/java/classic.html
    It doesn't look like they have one for Java 2 unless youupgrade to Mac OS X.

  • I need the JavaFX 2.2 standalone bundle for Windows. Where can I get it?

    Hi,
    Since JavaFX 2.2 is part of Java 7 now, there's only a JRE download.
    There used to be a standalone JavaFX 2.2 installer for Java 6 on windows. However it is no longer available. Could you please tell me where can I get it?
    Thanks

    alabala_kiril wrote:
    Never mind. I found it! Not sure how I've missed it. SorryPatience is a virtue ;)

  • HT201318 i've paid for my icloud storage but now need a vat receipt, where can i get one?

    i've paid for my icloud storage but now need a vat receipt, where can i get one?

    Usually Apple sends an invoice to your mail 1-2 days after your purchase.
    You may even search the invoice yourself, but I'm not sure if you will find it before 1-2 days.
    More info here  https://discussions.apple.com/message/12360444#12360444

  • Where can I get a new hard drive for my intel imac?  **** thing dumped, less than 3 years old.

    This is my first mac and the **** hard drive crashed in only 2+ years and of course the waranty is expired.  Can I replace the hard drive with any 3.5" replacement or do I need something special.  And if I do where can I get it?  I didn't see anything specifically for an intel imac at apple store.  I don't want to pay apple to install it, already spent enough money on this disappointing purchase.

    any 3.5" Sata drive will do.  I recommend http://www.macsales.com/, or http://www.newegg.com/

  • PI 7.11 - Where can I get the NEW java API's

    Hi,
    We use PI 7.0 in productive environment, but we plan a release update to PI 7.11. We have several Java Mappings for PI 7.0 with Java 1.4. So we have to upgrade this also to Java 1.5.
    We are using following SAP Java libs:
    - aii_map_api.jar
    - aii_mt_rt.jar
    - guidgenerator.jar
    - sapxmltoolkit.jar
    Where can we get the equivalent libraries of the PI 7.11 system. Are there new API's? Is there a documentation where to get this?
    Thx in advance
    Michael

    Thx !!!
    Quick answer )

  • Adobe creative cloud is asking for a serial number for updates - where do I get this from?

    Adobe Creative cloud is asking for a serial number for updates - where do I get this from
    we have recently Bought 5 x 1 year licences and been using this a month
    Michael

    Hi Mick,
    Please refer to the below link.
    http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
    Thanks

  • Microsoft - Worst Customer Support ever! Where can I get a decent Microsoft customer support for Windows in the UK?

    I have just tried to created the ISO of the operating system I am using for last 5 years, Windows 7 Ultimate.  I remembered that on Microsoft website are quick links dedicated exactly for that purpose. However, when page loaded I've seen this: 
    The Page or File You Requested Could Not Be Provided
    The resource you are looking for has been removed, had its name changed, or is temporarily unavailable. 
    HTTP Error 404 - File or directory not found. 
    If you purchased your Microsoft Windows software from another source, but have the software key provided by Microsoft, you can download the Windows operating
    system from the following website:
    Windows Downloads
    When I have clicked on the download link it took me to the webpage which seemed everything going for it.  3-step guide, including  the product code and language. Brilliant! I thought, until after filling all the details I have clicked on 'Next-Verify
    Product Key' than I faced a message:
    Validating your product key. This may take several minutes. Do not refresh the page or select back, doing so will cancel
    the request.
     When finished, a message pop up:  that the language provided is not compatible with the product key - try different language. Interesting, I am using this product last five years but is not compatible with English? I must have been a fairy then
    to be able to make it work for all these years. Then it got better.
    I have tried it again with a different message in the end: 
    System Error
    We encountered a problem with the product key you provided.  Please visit the  Microsoft Support Contact Us page
    for assistance.  Refer to Message Code 715-123130.
    So I have contacted Microsoft.  Contacting Microsoft is an experience itself and half.
    Being Microsoft certified, I used the link provided for IT Pros. I click the link provided and the page started loading..... and still loading now....
    So I have decided to call the customer support as you would normally do with any other organisation. To actually get to the phone number, illogically placed, took me a few loops around MS website. Once called, I got to speak to very efficient lady on reception
    who kindly switched me to the Technical Support. That's going well, I thought.
    Once the connection has been made, I felt that MS technical support is based in submarine 3 miles under water in Japanese sea. All I could hear was the very familiar sound of water of modern Voice over IP connection dated back in 2003 and a male voice (but
    by the sound of it it might have been a whale) asking me my name. Unsurprisingly, the connection was interrupted several times when I tried to describe my issue I am having, and eventually I was disconnected. 
    Still not put off, I made another attempt to contact MS customer service. This time I have been talking to a woman, seemed a little bit closer, maybe Bristol waters? Still in the submarine but not so deep. Also here I was asked my name AND surname; then
    I have described my intentions and the difficulty I am having in succeeding it. The woman on the phone didn't get at all what I was saying. I had to literally spat out word by word what the problem is. (Luckily, I have many years of experience supporting IT
    users over 60 years of age so it didn't take so long to explain it to her.) My thought just was, oh my God, how can she help if she didn't even understand the issue. Then the phone went completely dead for 10 mins. When it came back to life, I could hear clear
    sound of fishing boat passing by until a voice, I assume the same woman, apologised for the delay. And now - the best is coming:
    1) I was informed that the website is being tested, under construction and that doesn't work properly.
    Comment: How can Microsoft, one of
    leading organisation in  technology, do testing of website 'live'? Quite clearly, that is BS.
    2) I was advised to obtain the ISO image from 3rd Party website!!!! On question if she can give me the link to any 3rd party website the answer was NO.
    Comment: Seriously, so here we are in 21st Century, dealing with almost the GOD in IT and the recommended solution is - to obtain help for the God's product from UNKNOWN 3rd Party. Brilliant! If this is the case, where Microsoft is exactly heading to???
    3) She cannot tell me when the issue of non-working website will be sorted and I should go and buy the copy of Windows; than I will be able to do the ISO.
    Comment: Well, that's what I call a professional advise from Microsoft representative. The fact that I do have the physical copy was totally ignored, the fact that I have been running the system for several years have been totally ignored the whole point
    of this exercise (to cut down the time making ISO using Microsoft website) was totally ignored. 
    When I started asking questions to clarify what has been said I have been continuously interrupted. 
    To my question whether MS customer service representative have been trained to interrupt customers I have been told that I am talking over her. I asked her name, which she told me but I didn't catch and therefore I have asked if she could spell it. On that
    point she hung up.
    Well done Microsoft! And now I want to know just one reason why I should buy your products when the support, in case of problems, is not existent.
    Does anyone know where I can get a decent customer service that can resolve my issue better than smudge it ?
    Thank you.
    Lenka Novakova
    Microsoft Certified IT Professional Enterprise Administrator
    Microsoft Certified Solutions Associate

    Just having the same issue there, which is real not fun, I have not tried to contact them, but looking at  your experience I am not sure if I should.
    My key comes from the back of a laptop o so I guess that would be a W7
    OEM, and that could explain why you can't download a ISO from their website, would that also your case ?
    Also could it be because we are attempting to get the ISO after the product became EOL ?
    http://windows.microsoft.com/en-us/windows/lifecycle
    Maybe I will give a go with the customer care people and maybe I will get a right answer ;)
    Will keep you posted

  • Where can I get the latest Microsoft.SharePoint.ApplicationPages.dll for SharePoint 2010?

    Can somebody point me to where I can get the latest Microsoft.SharePoint.ApplicationPages.dll for SharePoint 2010?
    When I go into Library Settings on any library or list in SharePoint 2010 I’m getting an unexpected error; I see this in the SharePoint log:
    11/18/2014 13:12:26.36 w3wp.exe (0x2260)                       0x33EC  SharePoint Foundation        
            Runtime                                      
    tkau       Unexpected       System.NullReferenceException: Object reference not set to an instance of an object.    at Microsoft.SharePoint.ApplicationPages.ListEditPage.SetSectionLinks()    
    at Microsoft.SharePoint.ApplicationPages.ListEditPage.OnLoad(EventArgs e)     at ASP._layouts_listedit_aspx.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean
    includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 03c7c5b4-407f-461c-9cf7-0304eb797b1a
    I searched online and found this:
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/ed5aa58a-f5cc-4449-8bfd-65ca6f101641/list-settings-page-error-on-all-type-of-sharepoint-2010-listslibraries?forum=sharepointgeneralprevious.  It says:
    We noticed exactly the same issue after applying some SharePoint updates (SP1 + October 2011 CU).  The problem turned out to be that there was an older version (V14.0.4762.1000) of Microsoft.SharePoint.ApplicationPages.dll in the GAC. 
    This version was being loaded instead of the latest version of the DLL (14.0.6112.5000).
    Loading the latest version of Microsoft.SharePoint.ApplicationPages.dll fixed the problem with the List/Library settings page.
    I check our Microsoft.SharePoint.ApplicationPages.dll and found that we have version 14.0.6024.1000.
    I would like to try replacing it with the latest version to see if that could fix the problem going into library settings.
    Does someone know where I can get the latest Microsoft.SharePoint.ApplicationPages.dll for SharePoint 2010?
    David

    You would need to extract it from an update. Pre-SP2 SharePoint 2010 is no longer supported, I'd recommend upgrading to SP2 which should take care of any versioning issues.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • I need to connect my iPad to a projector and USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

    I need to connect my iPad to a projector and have USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

    You can connect via a cable or wireless using an Apple TV.
    http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
    Connect an iPad to a Television or Projector
    http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
    Connecting iPad iPhone or iPod to TV or Projector
    http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
    iPad Accessories: Connections for a TV or Projector
    http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
    You may be interested in AirPlay on the Apple TV:
    http://www.apple.com/airplay/
    Alternately, there are Apple Digital AV Adapters for hardwired connections:
    http://support.apple.com/kb/ht4108
    If your location does’t have wifi to use with the Apple TV, use a portable router.
    Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
     Cheers, Tom

  • Where can I get an eMac install DVD from?

    I've just been given an eMac that was destined for the skip. It came with no install DVD's and the administrator password is unknown. Whoever cleaned it out before parting company with it put in an administrators name as "apple" but didn't clear the password which is asked for in order to make changes & take over the computer. I wanted it as a spare & to play old games on that I can't bear to part with since getting my MacBook Pro intel i5 laptop (now updated with OS 10.7 Lion on it.)  I've done a bit of research to  try to find how to 'hack' into the system and change the administrator password but it seems I need the install disk to do a clean install again. As this eMac is running Mac OS 10.4 I should be able to wirelessly connect it to my established system once I gain control of it & use it as storage/back up etc.  I'd be grateful for any suggestions of either where I can get a disk from or how to change the root password.  Is there anyone out there who can help? I'm not a very techy pro though have had macs for many years so know my way around one fairly well.  Thanks

    It will be difficult to find the original Install/Restore disc, and then it may have an OS lower than Tiger 10.4
    Here's severtal methods to reset the password without the install disc:
    1. boot computer and hold the "apple" key and the "s" key.
    2. wait for terminal show
    3. release keys
    4. type without the quotes: "/sbin/mount -uaw"
    5. press enter
    6. type without the quotes: "rm /var/db/.applesetupdone
    7. press enter
    8. type without the quotes: "reboot"
    9. press enter
    This will let you create a new admin account when you reboot your computer.
    Also, without the discs, look at Mac OS X Tip - No Password, No Root, No CD? No Problem.
    http://www.macobserver.com/tip/2003/06/16.1.shtml
    Here is a way to get around not knowing the admin password on Macs.
    To reset your OS X password without an OS X CD you need to enter terminal and create a new admin account:
       1. Reboot
       2. Hold apple + s down after you hear the chime.
       3. When you get text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
              * mount -uw /
              * rm /var/db/.AppleSetupDone
              * shutdown -h now
       4. After rebooting you should have a brand new admin account. When you login as the new admin you can simply delete the old one and you’re good to go again!
     Cheers, Tom

Maybe you are looking for