Where do I get "Plot Multi-XY"?

Hi everyone,
The thing is that I need this "Plot Multi-XY" and it was mentioned in my help program as 'not available in base package'. Is there any other way that I can get hold of this Sub-VI??
P.S: Thanks VI Guy!!

The VI that you mention is part of the Picture plots palette and does not come with the LabVIEW base package and the only way to get it is to spend the money for an upgrade. However, the normal XY Graph in every version of LabVIEW has the capability of multiple plots. Is there a specific reason that you want the Picture Plot version?

Similar Messages

Where can I get an internal card reader/usb 3.0/firewire/SATS, etc for my Mac

Where can I get an internal memory card reader?
Is there one that also combines to give usb 3.0, firewire, SATS, etc.?

combo cards are terrible but if you look you will see that Highpoint has a USB3 card, yes; or SATA3 (which is probably better).
FW is slower than any drive in existence now.
multi interface chip cards have never performed well but needed back in their day, like OldWorld PowerMacs and those lacking FW800 and USB2.
www.macsales.com/firewire

Cannot draw logarithmic graph in Plot Multi-XY vi

Hello All,
I'm trying to use the Plot Multi-XY vi in the picture controls to dynamically draw an X-Y grid on a picture control. I need the grid to be logarithmically scaled, but when I check the "x log?" and "y log" booleans in the cartesian axis attributes to True, nothing at all shows up in the picture. If I un-check those options, I get a nice linear grid. Any help would be greatly appreciated!
Thanks,
Jason

Hi Ravens Fan,
Here's the VI (taken from an NI Example with just the Cartesian Axis Attributes added and the x and y logs turned to true. If you switch them to false you get a nice graph, but when set to true nothing shows up at all.
Thanks,
Jason
Attachments:
XY Multi Plot Log.vi ‏15 KB

Plot multi curves in one window

Is there anyone who can tell me how to plot multi-curves in one window using LabVIEW? The sample chart is attached. I have LabVIEW 7.1. If you think it is impossible in LabVIEW7.1, can LabVIEW 8.0 do the job?
Thanks for your help in advance.
Jane
Attachments:
PerformanceCurve.JPG ‏41 KB

Hi Jane,
CoastanMaineBird is right about the difference between a "plot", a
"Graph" and a "window".
It seems that what you want is a either a Graph or a Chart with multiple plots.
It's quite simple to do either of these. As said before, refer to the Context
Help (Ctrl + H) from the block diagram terminal of the Chart or Graph to see
how to add multiple plots. Here's a screenshot of how you would do it with a
Chart and a Graph:
If you want to use different Y-scales for each plot, you need to create multiple
Y-scales and then specify which plot uses which Y-scale:
I hope that this is explanation enough to get you started - otherwise, please
let me know.
Have fun!
Message Edited by Philip C. on 11-12-2005 03:46 PM
- Philip Courtois, Thinkbot Solutions
Attachments:
MultiPlot Chart and Graph.PNG ‏6 KB
Multiple Y-scales.PNG ‏13 KB

Where can I get a mouse for Mac OS 9? New ones say they're for Mac OS X.

Any one know where I can get a new mouse for OS 9? the ones at the store all say you need 10.4...This computer does have a manually install USB port, anyone know what will work or where to get one?

Hi, Jake -
Often one button on a multi-button mouse will be recognized as a default mouse button and be usable before the mouse software has loaded.
Regarding mouse software, my experience has been that Microsoft, Logitech, and Kensington mouses are usually okay from a hardware perspective, but that their software falls a bit short, especially with regard to scroll wheels.
I use Microsoft Intellimouse Explorer mouses with my G4s running OS 9 (I've also tried both Kensington and Logitech mouses, but prefer the shape and feel of the MS ones).
However, instead of installing the MS software that came with them, I use USB Overdrive - it makes all of the mouse features smoothly available including all five buttons and the scrollwheel, yet needs no extra extensions in order to do that - just a control panel (it does install a couple of extra extensions, but these can be disabled when using a mouse). One of the features of USBOD I especially like is that you can have different functions set for each of the buttons in different programs, and the mouse behavior changes automatically to the set for the active program, on the fly.

How can I get the "Multi-Camera Record" button to show up in the Multi-Camera editor?

I've used the Multi-Camera editor in Premiere for years but in the most recent update (Adobe Premiere Pro CC 2014) I can't get the Multi-Camera Editor to record my camera switches. I looked for the Multi-Camera Record button but it wasn't where it used to be, and even when hitting the plus sign to add more buttons it does not appear in that menu either.
What am I missing here? Please help. Thank you.

Did you try it in the program monitor?

HT201318 i've paid for my icloud storage but now need a vat receipt, where can i get one?

i've paid for my icloud storage but now need a vat receipt, where can i get one?

Usually Apple sends an invoice to your mail 1-2 days after your purchase.
You may even search the invoice yourself, but I'm not sure if you will find it before 1-2 days.
More info here https://discussions.apple.com/message/12360444#12360444

Where can I get a new hard drive for my intel imac? **** thing dumped, less than 3 years old.

This is my first mac and the **** hard drive crashed in only 2+ years and of course the waranty is expired. Can I replace the hard drive with any 3.5" replacement or do I need something special. And if I do where can I get it? I didn't see anything specifically for an intel imac at apple store. I don't want to pay apple to install it, already spent enough money on this disappointing purchase.

any 3.5" Sata drive will do. I recommend http://www.macsales.com/, or http://www.newegg.com/

PI 7.11 - Where can I get the NEW java API's

Hi,
We use PI 7.0 in productive environment, but we plan a release update to PI 7.11. We have several Java Mappings for PI 7.0 with Java 1.4. So we have to upgrade this also to Java 1.5.
We are using following SAP Java libs:
- aii_map_api.jar
- aii_mt_rt.jar
- guidgenerator.jar
- sapxmltoolkit.jar
Where can we get the equivalent libraries of the PI 7.11 system. Are there new API's? Is there a documentation where to get this?
Thx in advance
Michael

Thx !!!
Quick answer )

Adobe creative cloud is asking for a serial number for updates - where do I get this from?

Adobe Creative cloud is asking for a serial number for updates - where do I get this from
we have recently Bought 5 x 1 year licences and been using this a month
Michael

Hi Mick,
Please refer to the below link.
http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
Thanks

Microsoft - Worst Customer Support ever! Where can I get a decent Microsoft customer support for Windows in the UK?

I have just tried to created the ISO of the operating system I am using for last 5 years, Windows 7 Ultimate. I remembered that on Microsoft website are quick links dedicated exactly for that purpose. However, when page loaded I've seen this:
The Page or File You Requested Could Not Be Provided
The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.
HTTP Error 404 - File or directory not found.
If you purchased your Microsoft Windows software from another source, but have the software key provided by Microsoft, you can download the Windows operating
system from the following website:
Windows Downloads
When I have clicked on the download link it took me to the webpage which seemed everything going for it. 3-step guide, including the product code and language. Brilliant! I thought, until after filling all the details I have clicked on 'Next-Verify
Product Key' than I faced a message:
Validating your product key. This may take several minutes. Do not refresh the page or select back, doing so will cancel
the request.
When finished, a message pop up: that the language provided is not compatible with the product key - try different language. Interesting, I am using this product last five years but is not compatible with English? I must have been a fairy then
to be able to make it work for all these years. Then it got better.
I have tried it again with a different message in the end:
System Error
We encountered a problem with the product key you provided. Please visit the Microsoft Support Contact Us page
for assistance. Refer to Message Code 715-123130.
So I have contacted Microsoft. Contacting Microsoft is an experience itself and half.
Being Microsoft certified, I used the link provided for IT Pros. I click the link provided and the page started loading..... and still loading now....
So I have decided to call the customer support as you would normally do with any other organisation. To actually get to the phone number, illogically placed, took me a few loops around MS website. Once called, I got to speak to very efficient lady on reception
who kindly switched me to the Technical Support. That's going well, I thought.
Once the connection has been made, I felt that MS technical support is based in submarine 3 miles under water in Japanese sea. All I could hear was the very familiar sound of water of modern Voice over IP connection dated back in 2003 and a male voice (but
by the sound of it it might have been a whale) asking me my name. Unsurprisingly, the connection was interrupted several times when I tried to describe my issue I am having, and eventually I was disconnected.
Still not put off, I made another attempt to contact MS customer service. This time I have been talking to a woman, seemed a little bit closer, maybe Bristol waters? Still in the submarine but not so deep. Also here I was asked my name AND surname; then
I have described my intentions and the difficulty I am having in succeeding it. The woman on the phone didn't get at all what I was saying. I had to literally spat out word by word what the problem is. (Luckily, I have many years of experience supporting IT
users over 60 years of age so it didn't take so long to explain it to her.) My thought just was, oh my God, how can she help if she didn't even understand the issue. Then the phone went completely dead for 10 mins. When it came back to life, I could hear clear
sound of fishing boat passing by until a voice, I assume the same woman, apologised for the delay. And now - the best is coming:
1) I was informed that the website is being tested, under construction and that doesn't work properly.
Comment: How can Microsoft, one of
leading organisation in technology, do testing of website 'live'? Quite clearly, that is BS.
2) I was advised to obtain the ISO image from 3rd Party website!!!! On question if she can give me the link to any 3rd party website the answer was NO.
Comment: Seriously, so here we are in 21st Century, dealing with almost the GOD in IT and the recommended solution is - to obtain help for the God's product from UNKNOWN 3rd Party. Brilliant! If this is the case, where Microsoft is exactly heading to???
3) She cannot tell me when the issue of non-working website will be sorted and I should go and buy the copy of Windows; than I will be able to do the ISO.
Comment: Well, that's what I call a professional advise from Microsoft representative. The fact that I do have the physical copy was totally ignored, the fact that I have been running the system for several years have been totally ignored the whole point
of this exercise (to cut down the time making ISO using Microsoft website) was totally ignored.
When I started asking questions to clarify what has been said I have been continuously interrupted.
To my question whether MS customer service representative have been trained to interrupt customers I have been told that I am talking over her. I asked her name, which she told me but I didn't catch and therefore I have asked if she could spell it. On that
point she hung up.
Well done Microsoft! And now I want to know just one reason why I should buy your products when the support, in case of problems, is not existent.
Does anyone know where I can get a decent customer service that can resolve my issue better than smudge it ?
Thank you.
Lenka Novakova
Microsoft Certified IT Professional Enterprise Administrator
Microsoft Certified Solutions Associate

Just having the same issue there, which is real not fun, I have not tried to contact them, but looking at your experience I am not sure if I should.
My key comes from the back of a laptop o so I guess that would be a W7
OEM, and that could explain why you can't download a ISO from their website, would that also your case ?
Also could it be because we are attempting to get the ISO after the product became EOL ?
http://windows.microsoft.com/en-us/windows/lifecycle
Maybe I will give a go with the customer care people and maybe I will get a right answer ;)
Will keep you posted

Where can I get the latest Microsoft.SharePoint.ApplicationPages.dll for SharePoint 2010?

Can somebody point me to where I can get the latest Microsoft.SharePoint.ApplicationPages.dll for SharePoint 2010?
When I go into Library Settings on any library or list in SharePoint 2010 I’m getting an unexpected error; I see this in the SharePoint log:
11/18/2014 13:12:26.36 w3wp.exe (0x2260)                       0x33EC SharePoint Foundation
        Runtime
tkau       Unexpected       System.NullReferenceException: Object reference not set to an instance of an object.    at Microsoft.SharePoint.ApplicationPages.ListEditPage.SetSectionLinks()
at Microsoft.SharePoint.ApplicationPages.ListEditPage.OnLoad(EventArgs e)     at ASP._layouts_listedit_aspx.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 03c7c5b4-407f-461c-9cf7-0304eb797b1a
I searched online and found this:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/ed5aa58a-f5cc-4449-8bfd-65ca6f101641/list-settings-page-error-on-all-type-of-sharepoint-2010-listslibraries?forum=sharepointgeneralprevious. It says:
We noticed exactly the same issue after applying some SharePoint updates (SP1 + October 2011 CU). The problem turned out to be that there was an older version (V14.0.4762.1000) of Microsoft.SharePoint.ApplicationPages.dll in the GAC.
This version was being loaded instead of the latest version of the DLL (14.0.6112.5000).
Loading the latest version of Microsoft.SharePoint.ApplicationPages.dll fixed the problem with the List/Library settings page.
I check our Microsoft.SharePoint.ApplicationPages.dll and found that we have version 14.0.6024.1000.
I would like to try replacing it with the latest version to see if that could fix the problem going into library settings.
Does someone know where I can get the latest Microsoft.SharePoint.ApplicationPages.dll for SharePoint 2010?
David

You would need to extract it from an update. Pre-SP2 SharePoint 2010 is no longer supported, I'd recommend upgrading to SP2 which should take care of any versioning issues.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

I need to connect my iPad to a projector and USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

I need to connect my iPad to a projector and have USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
If your location does’t have wifi to use with the Apple TV, use a portable router.
Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
 Cheers, Tom

Where can I get an eMac install DVD from?

I've just been given an eMac that was destined for the skip. It came with no install DVD's and the administrator password is unknown. Whoever cleaned it out before parting company with it put in an administrators name as "apple" but didn't clear the password which is asked for in order to make changes & take over the computer. I wanted it as a spare & to play old games on that I can't bear to part with since getting my MacBook Pro intel i5 laptop (now updated with OS 10.7 Lion on it.) I've done a bit of research to try to find how to 'hack' into the system and change the administrator password but it seems I need the install disk to do a clean install again. As this eMac is running Mac OS 10.4 I should be able to wirelessly connect it to my established system once I gain control of it & use it as storage/back up etc. I'd be grateful for any suggestions of either where I can get a disk from or how to change the root password. Is there anyone out there who can help? I'm not a very techy pro though have had macs for many years so know my way around one fairly well. Thanks

It will be difficult to find the original Install/Restore disc, and then it may have an OS lower than Tiger 10.4
Here's severtal methods to reset the password without the install disc:
1. boot computer and hold the "apple" key and the "s" key.
2. wait for terminal show
3. release keys
4. type without the quotes: "/sbin/mount -uaw"
5. press enter
6. type without the quotes: "rm /var/db/.applesetupdone
7. press enter
8. type without the quotes: "reboot"
9. press enter
This will let you create a new admin account when you reboot your computer.
Also, without the discs, look at Mac OS X Tip - No Password, No Root, No CD? No Problem.
http://www.macobserver.com/tip/2003/06/16.1.shtml
Here is a way to get around not knowing the admin password on Macs.
To reset your OS X password without an OS X CD you need to enter terminal and create a new admin account:
   1. Reboot
   2. Hold apple + s down after you hear the chime.
   3. When you get text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
          * mount -uw /
          * rm /var/db/.AppleSetupDone
          * shutdown -h now
   4. After rebooting you should have a brand new admin account. When you login as the new admin you can simply delete the old one and you’re good to go again!
 Cheers, Tom

Where can I get an original x58 Pro-E IOH chipset heatsink assy?

Recently built an i7 gaming rig and like everyone else had high nb temps which I'm not very keen on.
I had a Thermalright HR-05 from another build (took it out of my old system and replaced it with the original HS and sold that PC leaving me with it) that I'll use on the nb, but covering the sb will be difficult since I'm running 2 4870 cards in the pci-e slots, covering the sb and not being able to move the cards to free space above it. I don't really want to get something too fancy for the sb (the sli version of the nb cooler) as it doesn't seem to get hot.
I was thinking along the lines of using the HR-05 for the nb, cutting up the heat-pipe of the original chip-set HS and just using it on the sb as temps and clearance will be fine. Problem of course is if ever need to rma the board, I'm screwed. I've read all the posts about issues with the hot IOH temps and solutions, and this is the way I'll think I'll go.
Currently my temps are up around 90 on load, and that's in winter! It's around 10 C in my room right now and when summer comes around with 30 C that's gonna shoot up!
Long story short, does anybody know where I can get an original X58 Pro-E IOH heatsink assy that I can keep safe in case I need it (touch wood)

I have thought about that, saw it under some suggestions to fix high temps. But they have that shoved toward the NB. My HR-05 will take care of the NB (plus some serious OC in sumemr which i want to do) I just need a HS for the southbridge , and it seems that the only HS that has enough clearance and fits into the MB with long cards in xfire or sli is the original SB HS, which leaves me wanting to cut the orginal HS up to reuse on the SB and finding another complete HS just in case.

Where do I get "Plot Multi-XY"?

Similar Messages

Maybe you are looking for