Where do i get proxy server addresses to insert in mysettings for Premium proxy switcher add on?

Where do I get proxy server addressesto insert in my setup of the add on.....Premium Proxy Switcher 1.0.10?

Thank you for checking, Tom,
I'm confused. What do YOU get when you push the feed button? And why is it working on yours and not either of my machines?
Today, my Mac (w/Safari 4) gets the same error message: Safari can’t open the page Safari can’t open the page “feed:http://vibrationalvoyages/vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml”. The error is: “The feed could not be loaded because the content is not in a known feed format.”
My little ASUS (with a Linux operating system) gets a screen that says "The requested URL was not found". The URL on that page is http://vibrationalvoyages./vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml
On both error messages, the URL I was checking was:
http://www.vibrationalvoyages.com/DivineLight_Vibrations_Principles_and_Applications/Divine_Light_Vibrations_Principles_ andApplications.html
The last URL was, of course, the URL generated by iWeb.
So, my question still is:
HOW CAN I GET MY FEEDS TO WORK PROPERLY? If the problem is there shouldn't be an http:// after feed: then, how do I get iWeb to set it up properly?
Any ideas?
GG

Similar Messages

  • Where do I get DNS server addresses?

    We just upgraded a new 100 mbyte broadband modem and the AirPort Express  doesn't seem to be recognizing it. The light just keeps flashing orange
    The setup assistant says I don't have any DNS server addresses . Where do I get these?

    Did you reset the Express to factory settings and then run the assistant? - it should pick up the settings from the modem automatically - also is the modem just a modem or a wireless router also?

  • Where get Messaging Server 6.3-2.01(64bit) for cluster 3.1Agent(SUNWscims)

    I'have Sun Java(tm) System Messaging Server 6.3-0.15 for Sun Cluster 3.1
    Now I Successed upgrage to Messaging Server 6.3-2.01 (built Jun 13 2007; 64bit)
    But I Can't create Messaging Server 6.3 Server HA Resource
    I suspect SUNWscims of cluster3.1 does not Messaging Server 6.3-2.01(built Jun 13 2007; 64bit)
    Where get Messaging Server 6.3-2.01 (64bit) for cluster 3.1 Agent?
    Note:I'm use java ES 5 update 1install cluster3.1 agnet compoent

    whr25 wrote:
    I suspect SUNWscims of cluster3.1 does not Messaging Server 6.3-2.01(built Jun 13 2007; 64bit)Correct.
    Where get Messaging Server 6.3-2.01 (64bit) for cluster 3.1 Agent?They don't exist yet.
    http://docs.sun.com/app/docs/doc/820-2124/6ndofheog?a=view
    "Currently, no Sun Cluster High Availability agent is supplied for the 64�bit version of Messaging Server 6.3. If you are looking to provide cluster support for your 64�bit installation, contact Sun Support. "
    The agents are scheduled to be provided in the next release of messaging server (due next year).
    Regards,
    Shane.

  • Where can I get Messaging Server 3.5 with 128-bit encryption?

    Where can I get Messaging Server 3.5 with 128-bit encryption?
    <P>
    Messaging Server 3.5 is available for export (40-bit encryption)
    and domestic (128-bit encryption). The domestic version includes
    support for Fortezza.

    It can be updated from any computer with an Internet connection but is best done from the computer which it normally syncs with. The update itself is free; if you have someone do it for you, you may be charged.
    Click here for installation instructions.
    (88299)

  • Where do you get the meial address to complain about really poor service

    Where do i get the email address to complain about very very poor service in Bristol uk

    I found the address and phone numbers! 
    I called 408-996-1010.  You'll have to add the country code if you want to call this number.  They told me to write to:
    Apple, Inc.
    Attn: Corporate Relations
    1 Infinity Loop
    Cupertino, CA 95014
    I did at the begining of March.   I receved a call from an Apple rep at the end of March, the  caller left me a voice mail.  I called returned the call withn 5 min left him a voice mail and never heard back from them.
    Best of luck!

  • Where can i get my ipod touch 5th generation screen replaced for, like, $50 to $60 dollars?

    where can i get my ipod touch 5th generation screen replaced for, like, $50 to $60 dollars? I broke it a few days ago and so far havent been able to find a place to repair it. Also,it would be best if the place was online, because live in a small town with virtually no places to get this done. If you could help that would be sooo amazing! Thank you!

    We can not advise you on getting unauthorized service for your iPod.
    Keep in mind that Apple does NOT sell parts
    The only possible sources for parts if you have it done by someone other than Apple are:
    Stolen parts
    Counterfeit parts
    Salvaged parts

  • Where doe PXWWorx get "transaction server"

    We are trying to reconfigure our network so that ZenWorks boot clients get their initial DHCP information from the local router rather than using DHCP relay..
    When I try to boot a client, I can successfully load dinic.sys via TFTP on the "distant" Zen imaging server, apparently based on the initial DHCP parameter "next -server". So the host is getting an IP address, route, and the address of the TFTP server. This setup also works to successfully boot generic Linux with PXElinux.
    But with Zenworks, after it loads dinic.sys it doesn't know how to contact the Zen imaging server via UDP port 4011, the next step in the boot process:
    DHCP (succeeds)
    PreWorx Pty Ltd
    Issuing New DHCP Request
    Local IP: 10.3.1.100
    Subnet Mask: 255.255.255.0
    Transaction Server ID: 0.0.0.0
    Error! No Response from port map service
    Zenworks shutting down.
    So - what DHCP parameter / option is used to communicate the "Transaction Server" to the booting client? It's NOT "next-server" or "boot-server" as far as I can tell.
    Thanks,
    -Wiley Sanders
    System Administrator
    St Marys College of Calfornia

    This turns out to be supplied by the undocumented DHCP Options 180, 181, and 182. We added the Zen Imaging server IP to Options 180 and 181, and added 0.0.0.0 to Option 182 and this seems to allow our PCs to boot off a "remote" Zen Imaging server on another subnet, using the router as the initial DHCP server on the local subnet. We arrived at this fix after snooping the booting process with Wireshark.
    For those of you fortunate enough to be running JunOS, the configuration is as follows:
    {master:0}[edit system services dhcp]
    wms2@ccf4200stack# show
    domain-name mydomain.edu;
    name-server {
    [etc]
    wins-server {
    [etc]
    boot-file dinic.sys;
    next-server 10.0.1.99;
    option 180 ip-address 10.0.1.99;
    option 181 ip-address 10.0.1.99;
    option 182 ip-address 0.0.0.0;
    pool 10.3.0.0/24 {
    address-range low 10.3.0.100 high 10.3.0.249;
    router {
    10.3.0.254;
    [etc]
    Where 10.0.1.99 is the address of the Zen Image server.

  • Where can i get weblogic server 6.1 sp4 11/08/2002 21:50:43 #221641

    Hi everybody,
    from where can I download weblogic server 6.1 sp4 11/08/2002 21:50:43 #221641software?
    cheers

    Hi Praveen,
    You're better off consulting the weblogic website for this kind of information.
    Regards.
    Ken
    Kenneth Saks
    J2EE SDK Team
    SUN Microsystems

  • Where can i get a refurbished out of warranty iphone 4 for 150$?

    My iphone 4 is tottally broke and ive been told on here that i can get an out of warranty iphone 4 for 150$. I am already in a contract with at&t and i called apple and they said they did not have refurbished phones and i also called at&t but they didnt either. Thats the most my mom wants to spend and i am desperate for a phone and i have looked everywhere but where can i get the out of warrant refurbished iphone for that price?

    call 1800 my apple I know for a fact they are still sending out referbished iPhone 4 you will have to pay the out of warrenty repair cost and it is 149

  • Where I can get and how to install BI Publisher template for word?

    I'm totaly new in BI Publisher. I read that the easiest way to create RTF templete is BI Publisher template for word. But I don't know where can I get it, and how to implement it MS Word. Does somebody can tell me the answer.
    Thanks, Best Regards.

    Hi Kostya,
    Only two steps:
    Download XML publisher desktop from oracle site and install on your machine.
    Once setup finish then you will able to see one new toolbar in MS word (Template Builder).
    Using that toolbar you can develop and test your report.
    Thanks
    Ravi
    [email protected]

  • Where can I get or how to make a Halloween transition for family movie?

    Anyone have or know where I can get a Halloween Transition for my Family movies?

    Ah, well now's a good time to learn something new.
    You'll notice with a wipe transition, there's a seam where the images meet. If you have an image of a jack o lantern or something, use that object to hide the seam. Place it on a layer above your video layer. Load that image into the Viewer and keyframe the position of the object to animate it. You can keyframe almost any property in the Motion tab of the viewer.
    Any way, just a thought. If you have Photoshop now would be a good time to learn selections and how to make images with alpha (transparent) channels just for this reason.

  • Where can I get the lastest Adobe Flash Player (version 10) for my Dual 1.8GHz PowerPC G5?

    Can someone tell me how to get the lastest Adobe Flash Player (version 10) for an Apple PowerPC G5 computer with OS 10.5.8?

    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version, 10.2.152.25, 10.3.x beta, or later, is for Intel Macs only, as Adobe no longer support the PPC platform. Version 11.0.1.152 is for Lion.
    * Unhelpfully, if you want the last version for PPC Macs, you need to go here:  http://kb2.adobe.com/cps/142/tn_14266.html  and scroll down to 'Archived Versions/Older Archives'. The first one on the list, Flash Player 10.1.102.64 is the one you download. More information here:  http://kb2.adobe.com/cps/838/cpsid_83808.html
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
    Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

  • Where can we get weblogic server virtual edition

    please provide the link
    thanks

    Hi Praveen,
    You're better off consulting the weblogic website for this kind of information.
    Regards.
    Ken
    Kenneth Saks
    J2EE SDK Team
    SUN Microsystems

  • Can I get the IP address used by other devices for Sync?

    One of my devices was stolen. I wanted to know if I could find it by using information synced. I'm hoping there is some way to determine the IP address, and then to contact the owner of that IP block to see if they can help me further. Is this at all possible, and if so, what steps must I take? Thank you.

    [[Disable Firefox Sync on a lost phone or tablet|Disable Firefox Sync on a lost phone or tablet]]

  • Where can I get a new replacement motherboard and graphics card for HP Tx2 touchsmart 1340ea? Cost?

    my computer has been getting either blue screen of death, or your machine has been turned off to save your computer or pixels jumping around across screen, so on white screen was getting streaks of blue from top to bottom and on black streaks of red dancing about, OR no screen at all - blank. 
    Now machine won't even boot up.  This all happened both on cable and wireless.   Product no VJ667EA #    TX2 Touchsmart 1340ea.
    There have been no upgrades of hardware , and on software front only thing is regular updates of windows.  It was running Windows 7 64 bit professional.
    It is now totally dead.  If you try to boot up you get the electric symbol light up, and caps lock and end /number lock light up and flash... thats it.
    We just tried to blow out dust that is all.

    Hi,
    This i one source:
      http://www.ebay.com/sch/i.html?_nkw=hp+touchsmart+tx2+motherboard
    Please also read this:
      http://answers.yahoo.com/question/index?qid=20100128052514AAuoHyx
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for