Where do I get Server 2.2.2 after release of 3.0?

Hello!
I just bought and setup a mini server which came with 10.8.2 and Server 2.1.1 after the release of Mavericks. I expected that I could download the lastest version of Server 2 after logging into the App-Store. To my surprise this is not possible :-(. So I have the problem, that I can not upgrade Server because it is not registered with an App-Store account - before the release of Mavericks you have to logging with an App-Store account and you could update to the latest version.
This is a production server running third party software and it can not be upgraded to Mavericks.
So how do I get the latest version of Server for Moutaon Lion?
Bye,
eweri
P.S. If Apple is interested in business costumers they should thing about thier upgrade / update policy - customers can not update immediatly because they are running third party software that is vital for customers business.

Call up the Apple Support folks directly, and explain your predicament.
They should be able to quickly get this sorted.

Similar Messages

Where I can get "Server ID"

When I set ADI db connection ,
I need set field "Server ID" ,
where i can get Server ID...?
in the ADI User's Guide page 1-7
have a Note : Server ID is a
system level parameter,
but I don't know where I can get it ...

Hey u can look in .dbc file in $FND_TOP/secure
Best Luck :-)
Ashutoosh

Where do I get Server 10.8 App

I had to blow my Mini away and do a clean install. I followed the directions but it didn't install Server, which came with the Mini. Since it didn't come with Disks (or a disk drive) all of the forums say download it from the App Store. The App Store doesn't list 10.8 Server any more. Where do I get the software I purchased?

I'm not sure this will work with a Mac Mini Server that had the OS X Server app pre-installed.
Backup your system first.
Then.......
Try restarting into Internet Recovery (Command+Option+R) until you see a spinning globe. This boots into Apple's servers and Apple's Recovery HD so you can reinstall the most current version of OS X that came preinstalled (factory condition). In your case that should be OS X 10.8.5. This is where I don't know if OS X Server will also be installed for you. If you can call a local Apple Store, ask them if an Internet Recovery (not plain Recovery mode) will get you OS X Server also. If not, ask them HOW you get it since your MM came with it.

Why would I get server cannot be contacted after a few hours of browsing?

I've had this problem since for several years, probably going back to v15 or so. Firefox loads and works fine for a while. Then, suddenly, for reasons I do not understand, it refuses to load any more webpages. I get a "server cannot be found" error. It's like Firefox forgets how to do an IP lookup, or gets a bogus answer that redirects to an IP that is bogus. It doesn't wait or timeout either. Once I get it once I cannot browse to any website until I close Firefox and reopen the program. Even opening new browser tabs or windows doesn't help. I have to completely exist Firefox (all instances).
I would like to note that if it is "about to break", when I click a link, bookmark, or type in the web address, when I hit enter it fails within a second or two. It doesn't sit around and timeout after 30 seconds.
I don't feel like I'm doing anything that is out of the ordinary. I have a few plugins, but this happens on multiple computers, including some that have no plugins disabled.
Here's things that may be affecting this behavior for me:
1. I use a hosts file to block a lot of spammy websites. I use a program called hostsman to handle the hosts file. I have the DNS service disabled because it cannot handle the number of entries that are in the hosts file. (been using this for more than 10 years)
2. I have disabled disk caching (I use an SSD and I have found that disk caching creates more problems for browsing than its worth). I still do the in-RAM caching, and it's not uncommon for Firefox to be using 1GB of RAM or so. I don't think I've ever seen it use more than about 1.2GB of RAM. All of the systems have massive amounts of free RAM. My main desktop has 64GB of RAM, with 75-80% of it free typically.
I've also seen this at different physical locations (home, work, other side of the country at friend's house's, etc.). This problem only affects Firefox. I haven't seen it on Chrome or Internet explorer (albeit I don't use them for hours on end). I typically have this issue a few times a day. I do work from home, and most of my work is in the browser, so it can be a bit annoying.
Right now my hardware on this machine is:
Lenovo Y55 with 16GB of RAM, i7-4700HQ and 512GB SSD. Other systems are far more powerful than this one, so I tend to think that hardware is not the problem.
Thanks.

I don't have an answer for you, but we did receive some reports of this after the release of Firefox 36. One Firefox 36 user also believed that Firefox had stopped sending DNS requests, which is a prerequisite to being able to connect to the web server. Perhaps it became more frequent for you as well, since otherwise, you probably would have posted this a few years ago...
I don't recall that we identified the source of the problem, but in many cases, it was "something" in the settings folder.
Along those lines, could you conduct this test:
'''Create a new Firefox profile'''
''This is in addition to and does not replace your existing settings.''
A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should come with completely fresh settings databases and a fresh cache folder.
Exit Firefox and start up in the Profile Manager using Start > search box (or Run) -- type or paste the following and press Enter:
firefox.exe -P
''Don't delete anything here.''
Any time you want to switch profiles, exit Firefox and return to this dialog.
Click the Create Profile button, assign a name like April7, and ignore the option to change the folder location. Then start Firefox in the new profile you created.
It might take a while to determine whether the new profile is works better than your old one. If you want to import your bookmarks from your regular profile during that time, here's how:
You can use the Library dialog (Ctrl+Shift+b or "Show All Bookmarks") to access the Restore feature. The trick is knowing where to find your bookmark backups in your regular profile. After clicking Choose File... you can paste this into the file name space and press Enter to drill down to your profile folders:
%APPDATA%\Mozilla\Firefox\Profiles
The semi-randomly-named folder that has your last backup is usually the one ending with "default". Click into that one, then into the '''bookmarkbackups''' folder. Here you can pick the most recently updated file to restore.
Important: restoring a bookmark backup wipes any bookmarks currently in your active Firefox profile and replaces it with the contents of the backup file.
I think it's also reasonable to install AdBlock Plus, LastPass and SQLite Manager, as those, by themselves, are unlikely to be the source of this seemingly rare problem. But I wouldn't add all your extensions at once to the new profile.

Where can i get KeyEd Up for after effects cc ?

hi
where can i get the keyed up for after effects ?
i googled but can not find it
thanks

You can edit the keyboard shortcuts file in a text editor. The KeyEd Up script only provides a convenient interface to do so.
To access the keyboard shortcuts file, go to Preferences > General and click the Reveal Preferences In Finder/Explorer button. The file is named Adobe After Effects 13.1 Mac en_US Shortcuts.txt, or similar if using Windows or a different version. Open it in a TextEdit, Notepad, or other keyboard shortcut editor. Save the file when you're through, and restart After Effects to see the changes. Tip: on Mac OS 10.8 and later, disable the Edit > Substitutions > Smart Quotes option, otherwise you'll receive errors when After Effects starts.

Where can i get a copy to OS X lion Server?

I can't upgrade to OS X Mountain Lion because i really need to use a piece of software that does not work with Mountain Lion but i also need to get OS X Server. When i try and get it from the mac app store it says i need mountain lion. Where could i get OS X lion Server?

Phone the online Apple Store and order a download code for it.
(72627)

Where can i get the report server name in Reports 10g

Where can i get my report server name in 10G ?

Thanks ..
When i opened the bat file :
i did not find any report server name ...
This is my file :-
@echo off
REM $Header: rwdiag.bat 13-may-2005.03:21:21 sunaraya Exp $
REM
REM rwdiag.bat
REM
REM Copyright (c) 2005, Oracle. All rights reserved.
REM
REM NAME
REM rwdiag.bat - rw diagnostic tool
REM
REM DESCRIPTION
REM Script to run the diagnostic tool used to locate servers / monitor packets on the network
REM
REM NOTES
REM Usage: rwdiag.bat -find <server name> | -findAll [-conf <config file>] [-timeout <timeout in sec>]
REM
REM Usage: rwdiag.bat -monitor [-log <logfile>] [-conf <config file>]
REM
REM MODIFIED (MM/DD/YY)
REM sunaraya 05/13/05 - Added rwrun.jar to the classpath for bug 4361664
REM sunaraya 04/22/05 - Provided execute permission to the script for bug 4323789
REM sunaraya 04/14/05 - sunaraya_bug-4221172
REM sunaraya 04/14/05 - Creation
REM
set ORA_HOME=C:\ORANT
if "%ORA_HOME%"=="" goto ERROR
set CLASSPATH=%ORAHOME%\jlib\zrclient.jar;%ORA_HOME%\reports\jlib\rwrun.jar
%ORA_HOME%\jdk\bin\java -DORACLE_HOME=%ORA_HOME% -classpath %_CLASSPATH% oracle.reports.utility.DiagServerLocator %*
goto END
:ERROR
echo "ORACLE_HOME is not set"
echo.
:END

Where can I get Oracle database server 9i for windows 2003

Hi,
I need Oracle Database Server 9i for Windows 2003. From Oracle online download, there is one a patch set available. Where can I get the full version?
Thanks
Laura

Hi, I found the solution. There is no software to direcly install Oracle 9i on Windows 2003. I need to install the software for NT/2000 first, the patch it.
That's why there is only patchset for 2003 for downloading. See the doc below:
three installation components required to install
Oracle9i Database release 2 (9.2.0.3.0) on Windows Server 2003. These three
installation components must be installed in the order listed. If you are
migrating a pre-existing Oracle9i database to Windows Server 2003, first
upgrade the database to the Oracle9i Database release 2 (9.2.0.3.0) patch set
before upgrading the operating system.
Obtain the following installation components:
Oracle9i Database Release 2 (9.2.0.1.0) for Windows
Oracle Universal Installer release 2.2.0.18.0 for Windows
Oracle9i Database Release 2 (9.2.0.3.0) Patch Set for Windows

Where I can get OC4J as a component of Oracle Application Server

Hi all !
I installed Oracle Application Server 10g release 2 (10.1.2) and updated Oracle AS Portal to 10.1.4. I want download the Oracle Container for J2EE (OC4J) 10g release 3 (10.1.3.4) as a component of Oracle Application Server (not a Standalone OC4J). Where I can find it ? At the http://edelivery.oracle.com/ I found some of items such as :
+ Oracle Application Server 10g (10.1.3) for Microsoft Windows (32-bit) (DVD) (Part 1 of 6) --> six parts.
+ Oracle Application Server 10g Release 3 (10.1.3.4.0) Companion CD 1 of 3 for Microsoft Windows x86 (32-bit) --> three parts.
But I don't know which of type ?
Pls show me link where I can get it ?

It moved to Where I can get OC4J as a component of Oracle AS 10g release 3 ?

Where can I get Messaging Server 3.5 with 128-bit encryption?

Where can I get Messaging Server 3.5 with 128-bit encryption?
<P>
Messaging Server 3.5 is available for export (40-bit encryption)
and domestic (128-bit encryption). The domestic version includes
support for Fortezza.

It can be updated from any computer with an Internet connection but is best done from the computer which it normally syncs with. The update itself is free; if you have someone do it for you, you may be charged.
Click here for installation instructions.
(88299)

Where do i get proxy server addresses to insert in mysettings for Premium proxy switcher add on?

Where do I get proxy server addressesto insert in my setup of the add on.....Premium Proxy Switcher 1.0.10?

Thank you for checking, Tom,
I'm confused. What do YOU get when you push the feed button? And why is it working on yours and not either of my machines?
Today, my Mac (w/Safari 4) gets the same error message: Safari can’t open the page Safari can’t open the page “feed:http://vibrationalvoyages/vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml”. The error is: “The feed could not be loaded because the content is not in a known feed format.”
My little ASUS (with a Linux operating system) gets a screen that says "The requested URL was not found". The URL on that page is http://vibrationalvoyages./vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml
On both error messages, the URL I was checking was:
http://www.vibrationalvoyages.com/DivineLight_Vibrations_Principles_and_Applications/Divine_Light_Vibrations_Principles_ andApplications.html
The last URL was, of course, the URL generated by iWeb.
So, my question still is:
HOW CAN I GET MY FEEDS TO WORK PROPERLY? If the problem is there shouldn't be an http:// after feed: then, how do I get iWeb to set it up properly?
Any ideas?
GG

Is there a firefox or best browser (except IE) for Windows Server 2003 R2 Standard? if so, is it free of charge (open source) forever? where can I get it? details. need answers to all questions

is there a firefox or best browser (except IE) for Windows Server 2003 R2 Standard? if so, is it free of charge (open source) forever? where can I get it? details. need answers to all questions

# As to what is the best browser, it is subjective. I think it is the best, others will disagree. There is no special version for Windows Server 2003, the usual version works on it.
# It is free of charge and will always be free.
# It is open source.
# You can get it from http://www.mozilla.com

Where can I get firmware for ultra enterprise 3000 server?

Hello,
Where can I get firmware download for ultra enterprise 3000 server so I can run in 64 bit mode?
Thanks,
Keith

go to URL htpp://uk.sunsolve.sun.com & in search engine type your question firmware for ultra enterprise 3000 server ,
thanks
bhogle

Where can i get the free server

hi
I want to accomplish the video conferencing ,where i can get the free
server .can u help me?
Thank you advance!!

MicroFocus license is valid for the first 30 days after installation. Somewhat like a trialware (but with full features). After that, it has to be bought from Oracle. It cannot be bought/ got in 30 days installments. Refer to the following doc:
[Document 747059.1|https://metalink3-dr.oracle.com/od/faces/secure/km/DocumentDisplay.jspx?id=747059.1]

Where do I get DNS server addresses?

We just upgraded a new 100 mbyte broadband modem and the AirPort Express doesn't seem to be recognizing it. The light just keeps flashing orange
The setup assistant says I don't have any DNS server addresses . Where do I get these?

Did you reset the Express to factory settings and then run the assistant? - it should pick up the settings from the modem automatically - also is the modem just a modem or a wireless router also?

Where do I get Server 2.2.2 after release of 3.0?

Similar Messages

Maybe you are looking for