Where do i get the cable to connect Ipad to projector?

Where do I get the cable to connect Ipad2 to digital projector?

It depends on the kind of projector you refer to. If the projector has a VGA connection, you will need this cable.
If the projector has a HDMI connection, you will need this one.
If you can choose, I would take the HDMI one, since it supports charging your device and playing at the same time. HDMI also carries sound, so you don't need an extra audio cable.
You will need an additional HDMI-male to HDMI-male or VGA-male to VGA-male cable to connect the apple cable (linked above) to your projector.

Similar Messages

Where can I get a cable to connect my 2nd generation iPod to a USB port on a Windows PC?

My wife wants to give her old iPod to her sister but we don't have a cable that will connect to a PC's USB port. Are there adapters or something similar available that will enable our old 2nd generation iPod to communicate with a PC via a USB connection? Any other suggestions?

Why not just buy another Apple USB dock connector cable from somewhere such as Amazon? You (or your wife's sister) can get one used or brand new for pretty cheap.
http://www.amazon.com/Dock-Connector-Cable-iPhone-White/dp/B0007RV3IE
B-rock

I have a Firewire 800 external hard drive and need to connect to my new MacBook Air. Where can I get the correct cable?

I have a Firewire 800 external hard drive and need to connect to my new MacBook Air. Where can I get the correct cable?

Apple has announced a Thunderbolt to Firewire adapter, but not yet given a release date.

I need to connect my iPad to a projector and USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

I need to connect my iPad to a projector and have USB ports. What do I need to do this and where can I get the suitable fittings? I really need to have more than one USB connection port. Help

You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108
If your location does’t have wifi to use with the Apple TV, use a portable router.
Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
 Cheers, Tom

I have a MacBook 13-inch, Late 2009, I'd like to get a cable to connect a monitor. However I keep order the wrong part. Can somebody tell me what part I need.

I have a MacBook 13-inch, Late 2009, I'd like to get a cable to connect a monitor. However I keep order the wrong part. Can somebody tell me what part I need.

The Late 2008 model 5,1 Aluminum Unibody and the Late 2009 model 6,1 and Mid 2010 model 7,1 White Unibody have a Mini DisplayPort.
The Early 2006 model 1,1 through Early 2008 model 4,1s plus the Early and Mid 2009 model 5,2s have Mini-DVI ports. Each would take a different adapter to connect with the TV.
To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info (and then System Report if you’re running 10.7 Lion). When System Profiler comes up check the Model Identifier and post it back here.

Where do I get the activation code in order to watch ESPN

Where do I get the activation code to watch espn on my apple tv?

So since I don't have an ethernet cable in the room where the Apple TV is, I'm screwed ? Thanks Apple !!! Like Microsoft, if they do not acknowledge a problem, it simple doesn't exist !!

Where do I get the 4 digit passcode to unlock my ipad screen?

My Ipad screen has become locked, where do I get the the 4 digit passcode to open it?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Hi, just got a new computer and need to move my library from the old one to the new one. Does anyone know how to do this or where I can get the information? Thanks!!

I just got a new computer and need to move my itunes library from my old computer to the new computer. Does anyone know how to do this or where I can get the information? Thanks!

If you Google ipod nano 6th generation manual, you can download the PDF manual. Here's a quote from page 19:
Transfer purchased content to another computer:
1 Open iTunes on the other computer and choose Store > Authorize This Computer.
2 Connect iPod nano to the newly authorized computer.
3 In iTunes, choose File > Transfer Purchases from iPod.
Songs that are not from the iTunes store can be copied to the new computer, and you just have to do File>Add to Library to get them into iTunes. And if you don't plan to continue using your old computer, you should deauthorize it because you only get 5 authorizations for iTunes store purchases, and this will cancel out the authorization on the old computer.

Why do I get the message "error connecting to acrobat"?

Why am I getting the message "error connecting to the acrobat..." when I try to open a pdf file from the internet? I have the adobe reader installed on my tablet. This is something that just started happening. I did not have this problem before. I hope that someone can help.

Hi,
Thanks for writing to us. Are you able to view the file after this message? Is this message coming every time when you are trying to open a file from internet? If possible please share the file or link from where you are trying to open this file with us on [email protected] so that we can resolve the issue you are facing.
Thanks,
Shefali

Where does SMC get the power to reset?

Where does SMC get the power to reset?

The SMC is maintained when the battery is connected or the charger is. When removed the SMC's content is erased. However, if your computer has a PRAM battery, then the SMC may use that instead of the main battery. But not all notebooks have a PRAM battery but rely on the main battery only. All depends on the specific motherboard design. Typically, these lithium cells have a maximum life of around 5 years.
In any case you have not stated what you think the problem is with your SMC, so I cannot say whether your assumption about having a dead PRAM battery is correct. If you cannot maintain PRAM settings, then that would be more indicative or the battery being dead.

HT201699 where can i get the APN information?

i have ipad2, and i cannot connect to the net using my 3G, where can i get the APN information? please help?

Every Carrier around the world has different APN Settings so the best place it to actually ask your Carrier what the settings are.

I get the message on my ipad that "Ipad disabled" connect to iTunes how do i get logged in to iTunes on my desk top to connect?

i get the message on my ipad that "Ipad disabled" connect to iTunes how do i get logged in to iTunes on my desk top to connect?

Force iPad into Recovery Mode Step by Step
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
On Computer
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. iPad Recovery Mode on computer screen
8. Select "Restore iPad"...
9. Select "Restore and Update"
10. Extracting Software.
11. Preparing iPad for restore.
12. Waiting for iPad.
13. Verifying iPad restore...
14.Restoring iPad software.
15. Verifying iPad software.
16. Verifying iPad Restore...
17. Restoring iPad firmware...
18. Your iPad is restored to factory settings; keep iPad connected to computer
19. Activate iPad
20. Enter Apple ID and Password
21. Continue
22. Welcome to Your New iPad
(a) Set up as new iPad (b) Restore from this backup (select from list of backups)
23. Restore from this backup
24. Continue
25. Restoring iPad from backup
26. The settings of your iPad have been restore; keep iPad connected to computer
27. Syncing iPad (Step 1 to 5)
28. Preparing apps to sync
29. Copying 1 of 9
30. Sync apps, movies and music to iPad
31. Finishing syncing
32. Eject iPad

PI 7.11 - Where can I get the NEW java API's

Hi,
We use PI 7.0 in productive environment, but we plan a release update to PI 7.11. We have several Java Mappings for PI 7.0 with Java 1.4. So we have to upgrade this also to Java 1.5.
We are using following SAP Java libs:
- aii_map_api.jar
- aii_mt_rt.jar
- guidgenerator.jar
- sapxmltoolkit.jar
Where can we get the equivalent libraries of the PI 7.11 system. Are there new API's? Is there a documentation where to get this?
Thx in advance
Michael

Thx !!!
Quick answer )

Where can I get the latest Microsoft.SharePoint.ApplicationPages.dll for SharePoint 2010?

Can somebody point me to where I can get the latest Microsoft.SharePoint.ApplicationPages.dll for SharePoint 2010?
When I go into Library Settings on any library or list in SharePoint 2010 I’m getting an unexpected error; I see this in the SharePoint log:
11/18/2014 13:12:26.36 w3wp.exe (0x2260)                       0x33EC SharePoint Foundation
        Runtime
tkau       Unexpected       System.NullReferenceException: Object reference not set to an instance of an object.    at Microsoft.SharePoint.ApplicationPages.ListEditPage.SetSectionLinks()
at Microsoft.SharePoint.ApplicationPages.ListEditPage.OnLoad(EventArgs e)     at ASP._layouts_listedit_aspx.OnLoad(EventArgs e)     at System.Web.UI.Control.LoadRecursive()     at System.Web.UI.Page.ProcessRequestMain(Boolean
includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) 03c7c5b4-407f-461c-9cf7-0304eb797b1a
I searched online and found this:
https://social.technet.microsoft.com/Forums/sharepoint/en-US/ed5aa58a-f5cc-4449-8bfd-65ca6f101641/list-settings-page-error-on-all-type-of-sharepoint-2010-listslibraries?forum=sharepointgeneralprevious. It says:
We noticed exactly the same issue after applying some SharePoint updates (SP1 + October 2011 CU). The problem turned out to be that there was an older version (V14.0.4762.1000) of Microsoft.SharePoint.ApplicationPages.dll in the GAC.
This version was being loaded instead of the latest version of the DLL (14.0.6112.5000).
Loading the latest version of Microsoft.SharePoint.ApplicationPages.dll fixed the problem with the List/Library settings page.
I check our Microsoft.SharePoint.ApplicationPages.dll and found that we have version 14.0.6024.1000.
I would like to try replacing it with the latest version to see if that could fix the problem going into library settings.
Does someone know where I can get the latest Microsoft.SharePoint.ApplicationPages.dll for SharePoint 2010?
David

You would need to extract it from an update. Pre-SP2 SharePoint 2010 is no longer supported, I'd recommend upgrading to SP2 which should take care of any versioning issues.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?

Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education.

Where do i get the cable to connect Ipad to projector?

Similar Messages

Maybe you are looking for