Where do i go on my system to connect my modem to firefox

i am trying to connect my modem to firefox so that i can use my labtop

In the help menu select "About Mozilla Firefox"
You are using an old version of Firefox (3.6.3)

Similar Messages

  • Where to define third party logical system name in file to idoc scenario

    Hi Friends,
      I am shalini shah.
    I have one doubt, where I can define the logical system name in File to Idoc scenario.
    I created Logical system for R/3 system in SALE t.code, but where to define the Third party logical system ,
    In SALE or any where.
    Please give me solution.
    Warm Regards,
    Shalini Shah

    Hi Shalini,
    You need to create Business system in SLD and import the business system in ID.Then u will start with the configuration.
    Just refer the below link for configurations with step by step solution.
    File To IDOC - Part1 (SLD and Design):
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
    File To IDOC - Part2 (Configuration):
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
    File To IDOC - Part3 (Steps required in XI and R3):
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
    Thnx
    Chirag

  • (RFC vs files), where Sender SAP and receiver multiple system

    Publish and Subscribe using  BPM or Without BPM (RFC vs files), where Sender SAP and receivers multiple system,.
    This is my 1st BPM scenario in sandbox system
    For this scenario
    I Created 2 Data types
    2 MT,
    Service interface:
    Request interface Mode:Asynchronous
    Abstract Req interface,Mode:Asynchronous
    Response Interface,Mode:Asynchronous
    Abstract Respomse Interface ,Mode:Aysnchronous
    Synchronous Interface ,Mode:Synchronous
    2 Message mapping for Req and Resp
    1 Operation Mapping
    BPM design: Plz find the attatchement
    Can anyone please help me how many Interface determinations,receiver determinations ,sender agreements,receiver agreements need to create for this.......
    It will be good if anyone send the BPM design flow for this.........
    can we do this scenario without BPM?
    Regards
    A.Muni kumar
    Edited by: Muni 1234 on Jan 31, 2012 10:24 AM

    Hi
    Receiver is FTP only.....
    SAP side is RFC.........
    RFC sender will be initiating the scenario, and there is receiver is File, PI should go to file directory and take the file then send it back to RFC as response.
    Sender: RFC
    Receiver: File
    1. is this scenario with condition based routing.. so that each time outof many receiver systems it will trigger any specific system.
    if above is the case then you can achive this without BPM also..
    Yes...its condition based routing...
    I Used async in this scenario.....sender side configurations also done....
    But when when I am triggering BAPI from SE37 I am getting an error
    Exception SYSTEM_FAILURE
    Message ID: 00 Message number: 341
    Message:
    Runtime error CALL_FUNCTION_NOT_FOUND has occurred
    How to Solve this????
    I checked the RFC destination which i created in TCP/IP..a nd i mentioned the same in se37 RFC target system..
    Connection is Ok
    Or we need to create proxy for MI and report for this?
    Edited by: Muni 1234 on Feb 1, 2012 8:38 AM

  • How to install windows 7 in i mac model A 1224 where a message of an operating system wasn't found

    how to install windows 7 in i mac model A 1224 where a message of an operating system wasn't found. Try disconnecting any drives that don't contain an operating system.

    Thank you sir for replying my question, but unfortunately iwas using only windows 7 on my imac A1224 as my mac OS removed accidentally on earlier. Now there was only windows on the drive. i was trying to updating my windows, then on restarting, it can't boot properly (not taking cd or booting from Hd). if there is any hot keys for booting from cd or hard disk? i'm very grateful as you can help me in this problem.
    thank you once again
    with regards

  • HT1888 Where can i download the Vista system support drivers?  It's only giving me the Windows 7 version...

    Where can i download the Vista system support drivers?  It's only giving me the Windows 7 version...

    I'm a lousy guesser so if you give more information on what year/model MPro  and what MacOS version your running it'd sure help? Two different OS's two different ways to install.
    If your running 10.7( Lion) then Apple no longer supports XP OR Vista and no longer makes Boot Camp drivers for them.

  • IMac-stereo system wireless connection?

    Suggestions wanted, please, for wireless connection of IMac with Airport Extreme card and/or Bluetooth to older stereo system in other room to play ITunes/Internet-accessed radio stations.

    Do you know whether it can be used simultaneously with other tasks, such as printing wirelessly via Airport and browsing? I could never print without switching off Internet access in order to connect to my printer.
    Yes, the AX can be configured in several ways, including a remote base station in a Wireless Distribution System (WDS). In a WDS, the AX would both extend your current AEBSn's wireless network and provide a means to stream iTunes and/or share a USB printer concurrently.
    Where is a good guide to all these connectivity issues?
    There are several good ones at the following link: Apple Manuals

  • Where do I find the version number of the latest version of Firefox before downloading?

    I must request permission to download Firefox at work and IT needs version number before granting permission. Texas regulatory agencies use Firefox and work only allows microsoft internet explorer. To use the agencies models and reports I need Firefox. The website for downloading does not list the version number. Where do I find the version number of the latest version of Firefox before downloading?

    You can find the latest Firefox 20.0.x release in all languages and for all Operating Systems here:
    *http://www.mozilla.org/en-US/firefox/all.html
    If you hover a download link the you should see the Firefox version in the pop-up at the bottom of the screen.

  • Am having all kinds of trouble enabling Home Sharing on Apple TV. Had been working previously, but now I am unable to share files between TV, Ipods and iMac. I have tried restarting all hardware, systems and connections. I recently upgraded modem?

    Am having all kinds of trouble enabling Home Sharing on Apple TV 3. Had been working previously, but now I am unable to share files between TV, Ipods and iMac. I have tried restarting all hardware, systems and connections. I recently upgraded modem, would this have an effect on connectivity?

    U may need to check the settings on ur PC or Mac.

  • [32282.000367] firefox:2114 freeing invalid memtype c02f2000-c0302000 I get this from system log using latest version of Firefox: What kind of problem is this?

    I get this from system log using latest version of Firefox:
    [32282.000367] firefox:2114 freeing invalid memtype c02f2000-c0302000
    What kind of problem is this?
    Anyway Firefox seem to be working correct. I would like to be sure that it'snt a security problem.

    Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
    BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
    Thanks for your help; hope this wasn't extremely long.

  • Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?

    Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?

    iPad requires Wifi (or 3G /LTE) to connect to the Internet. You cannot connect a USB modem to the iPad.
    You can create your own WiFi hotspot through your computer for your iPad to connect to, if your computer supports this functionality. All Wifi Macs and many Wifi PCs do. Check your computer manual for how to do it.

  • BPC Excel: The system cannot connect to the server. There might be network

    Hi Guys,
    I get the following error when i try to connect to BPC Excel: The system cannot connect to the server. There might be network or security issue.
    This only happen on clients machines, I have installed the client tools on the server and tested, i can connect to Excel but not on the machine. My MS office version is the same as the one on the server. BPC is ver 5.04
    Has anyone experienced the same problem.
    your help will be greatly appreciated.

    Let me summarize your issue to see if I may help.  If I cannot, then you will need to work with SAP Support on the connection problem.
    - You have a single or multi-server setup?
    - Installed using BPC 5.1 SP3, (or 5.0.502) correct?
    - You can enter the BPC on the server, both via BPC Excel and BPC Admin?
    - When you initiate BPC Admin on your client, so can connect to the Server and perform Admin operations?
    - When you initiate BPC for Excel, and walk through the connection wizard, you cannot connect to the server?
    - When you are in the Connection Wizard, are you using a path or a Server designation?
    - Is the system on a single domain?
    - When you added users to the Admin Security profile, they were selected from a DOMAIN?
    - You have processed security and assigned ALL TASKS currently and processed the MEMBER ACCESS profiles, yes?
    After all of this, have you uninstalled 1 BPC client, cleared the ProgramFiles/BPC folder, and deleted the local stored BPC information?  If you haven't, just for simplification, I would attempt this process.
    You also hae read all the SAP Support Notes regarding using Excel2007 with BPC and the issues you may experience?
    Please let me know and maybe we can help.

  • Someone stolen my ipod, Is't possible to know where is my iPod touch if the person connect Internet with?

    Someone stolen my ipod, Is't possible to know where is my iPod touch if the person connect Internet with?

    What To Do If Your iDevice Is Lost Or Stolen
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. What to do if your iOS device is lost or stolen
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

  • Adobe reader unresponsive when my system is connected to internet

    adobe reader is unresponsive when i try to open pdf file and when my system is connected to internet. I am running 11.0.09 version.
    when i switch off my internet connection the pdf gets responsive and works fine after connecting internet again.

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • Where do I find my pass code to connect to wifi

    Where do I find my pass code to connect to wifi

    If its your WiFi, its whatever you set it to be, if not your WiFi, ask the WiFi provider.

  • How to check how many source systems are connected to my BW system?

    Hi friends
    how to check how many source systems are connected to my BW system?
    Regards
    BN

    Hi All,
    Thanks a lot for your help. its resolved now with your help.
    Regards
    BN

Maybe you are looking for