Where do I put the code for ePrint mobile?
I am currently signed in and can't find the area for ePrint mobile.
Hi MalWill456,
Which code are you talking about?:
- The ePrint code that printed off when web services was enabled?
- The code for the HP ePrint Home and Biz app?
- The code or server for the HP ePrint Service app?
Depending on which code you need, you would obtain it different ways.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.
Similar Messages
-
JBuilder Question - Where do i put the code?
I am building a jList using the designer in
Jbuilder. In what event procedure do i put the
code that assigns an array and so on?
thanks for any help
maggie evansTypically you'll code the initial population of UI components in the jbInit method. If you want to dynamically populate the list as a result of a selectable UI component being clicked then put the code in the action performed method for the 'clicked' component.
-
Where do I add the code for Haloscan (blog)?
Since my blog won't work because I'm using another server, I am going to try Haloscan. How do I use this? Where do I post the code exactly??
Thanks, Mark. The Haloscan stuff on my site adds it as a guestbook though, not as individual comments for blog entries.
To add Haloscan to blog entries for commenting, I recommend iComment:
http://web.mac.com/cbrantly/iWeb/Software/iComment.html
Here's an alternative commenting system I like better than Haloscan:
http://js-kit.com/comments/
Directions for adding it are here:
http://www.varkgirl.com/Varkgirl/Basic%20HTML%20Additions.html
I use this on my blog, example here:
http://www.varkgirl.com/Varkgirl/Updates/5BE814D6-A24F-45C0-A79C-C013C43F4528.ht ml
Disclaimer: My website contains various ads, so if you click them while visiting my site, I will receive financial compensation, which I use for materials for my classroom. -
Where to put the code for dynamically change dataprovider
I have a table bound to dataprovider1 by default ( by the SJC ). In the same page, I also have a dataprovider2 which is for the same fields of the same table of dataprovider1. The only different is to put some criteria on one field ( like F_D1 = '5' ) so that one provider will show all rows, the other just some rows.
The code to change the dataprovider is as follows :
tableRowGroupWorksheet.setValueBinding("sourceData", getApplication().createValueBinding("#{WorksheetPage.dataprovider2}") );
If I put this code into some button_action() and then I click that button, then the page displays the corresponding data just fine.
But if I put this code in either preprocess or prerender, then things seems messed up : the number of pages is for data of dataprovider1, but when I click button Next of the table then it shows the number of pages of dataprovider2. ( I also try to put it in init but this does not help either ).
I need this code to be run when this page is selected but right now it requires me to click on a button :(
The reason I need it runs automatically is because of the logic generated from the previous page.
Thanks for your advive,
VuAfter re-reading the life-cycles of JSF and the injected phases of SJC, I think I know why it does not work when the page is first called. In this case, AplyRequestValue phase is skipped therefore preprocess is never called. Also in this case, the component tree, with binding, validators, ... is only built in the Render Response phase and this phase is right after PreRender is called therefore the binding code I put in prerender is overwritten by Render Response.
When using a button action, the component tree is already built and not rebuit under Render Response, therefore that code is not overwritten. Also in this case, preprocess is called so putting that code under either preprocess or prerender will work.
Please correct me.
Thanks,
Vu -
Where do I write the code for customer exit variable?
Hi Gurus,
Can anyone tell me where and the procedure that I have to follow to get to the include ZXRSRU01 where I can write customer exit variable code.
I know its written in ZXRSRU01, but in my system it seems like its not active or does not exist. How do I get to start working in this include for customer exit variables?
Any help is appreciated. Thank you.
Regards
Reddyhi Reddy,
variable exit use enhancement RSR00001 not RSAP0001. EXIT_SAPLRRS0_001.
try to follow some steps in 'how to' doc related to this, and sample code may useful for you
https://websmp206.sap-ag.de/~sapdownload/011000358700002762582003E/HowToDeriveVariableValue.pdf
https://websmp206.sap-ag.de/~sapdownload/011000358700002765042003E/HowToVerifyVariableInput.pdf
INCLUDE ZXRSRU01 *
DATA: L_S_RANGE TYPE RSR_S_RANGESID.
DATA: LOC_VAR_RANGE LIKE RRRANGEEXIT.
CASE I_VNAM.
WHEN 'CUMMONTH'.
IF I_STEP = 2. "after the popup
LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
WHERE VNAM = 'MONTH'.
CLEAR L_S_RANGE.
L_S_RANGE-LOW = LOC_VAR_RANGE-LOW(4)."low value, e.g.200001
L_S_RANGE-LOW+4(2) = '01'.
L_S_RANGE-HIGH = LOC_VAR_RANGE-LOW. "high value = input
L_S_RANGE-SIGN = 'I'.
L_S_RANGE-OPT = 'BT'.
APPEND L_S_RANGE TO E_T_RANGE.
EXIT.
ENDLOOP.
ENDIF.
ENDCASE.
hope this helps. -
Where to copy the codes for flow logic?
Hi.
I know that SE37 is to access the source code for function modules,
and SE38 is to access the source codes for programs/reports.
Does anyone know where I could get the codes for the<b> flow logic of the dialog screens</b> called by my programs?
Thanks.Hi,
SE80 transaction
Select program in drop down & enter the program name
Best regards,
Prashant -
Architecture question...where to put the code
Newbie here, so please be gentle and explicit (no detail is
too much to give or insulting to me).
I'm hoping one of you architecture/design gurus can help me
with this. I am trying to use good principals of design and not
have code scattered all over the place and also use OO as much as
possible. Therefore I would appreciate very much some advice on
best practices/good design for the following situation.
On my main timeline I have a frame where I instantiate all my
objects. These objects refer to movieClips and textFields etc. that
are on a content frame on that timeline. I have all the
instantiation code in a function called initialize() which I call
from the content frame. All this works just fine. One of the
objects on the content frame is a movieClip which I allow the user
to go forward and backward in using some navigation controls.
Again, the object that manages all that is instantiated on the main
timeline in the initialize() function and works fine too. So here's
my question. I would like to add some interactive objects on some
of the frames of the movieClip I allow the user to navigate forward
and backward in (lets call it NavClip) . For example on frame 1 I
might have a button, on frame 2 and 3 nothing, on frame 4 maybe a
clip I allow the user to drag around etc. So I thought I would add
a layer to NavClip where I will have key frames and put the various
interactive assets on the appropriate key frames. So now I don't
know where to put the code that instantiates these objects (i.e.
the objects that know how to deal with the events and such for each
of these interactive assets). I tried putting the code on my main
timeline, but realized that I can't address the interactive assets
until the NavClip is on the frame that holds the particular asset.
I'm trying not to sprinkle code all over the place, so what do I
do? I thought I might be able to address the assets by just
providing a name for the asset and not a reference to the asset
itself, and then address the asset that way (i.e.
NavClip["interactive_mc"] instead of NavClip.interactive_mc), but
then I thought that's not good since I think there is no type
checking when you use the NavClip["interactive_mc"] form.
I hope I'm not being too dim a bulb on this and have missed
something really obvious. Thanks in advance to anyone who can help
me use a best practice.1. First of all, the code should be:
var myDraggable:Draggable=new Draggable(myClip_mc);
myDraggable.initDrag();
Where initDrag() is defined in the Draggable class. When you
start coding functions on the timeline... that's asking for
problems.
>>Do I wind up with another object each time this
function is called
Well, no, but. That would totally depend on the code in the
(Draggable) class. Let's say you would have a private static var
counter (private static, so a class property instead of an instance
property) and you would increment that counter using a
setInterval(). The second time you enter the frame and create a new
Draggable object... the counter starts at the last value of the
'old' object. So, you don't get another object with your function
literal but you still end up with a faulty program. And the same
goes for listener objects that are not removed, tweens that are
running and so on.
The destroy() method in a custom class (=object, I can't
stress that enough...) needs to do the cleanup, removing anything
you don't need anymore.
2. if myDraggable != undefined
You shouldn't be using that, period. If you don't need the
asset anymore, delete it using the destroy() method. Again, if you
want to make sure only one instance of a custom object is alive,
use the Singleton design pattern. To elaborate on inheritance:
define the Draggable class (class Draggable extends MovieClip) and
connect it to the myClip_mc using the linkage identifier in the
library). In the Draggable class you can define a function unOnLoad
(an event fired when myClip_mc is removed using
myClip_mc.removeMovieClip()...) and do the cleanup there.
3. A destroy() method performs a cleanup of any assets we
don't need anymore to make sure we don't end up with all kinds of
stuff hanging around in the memory. When you extend the MovieClip
Class you can (additionally) use the onUnLoad event. And with the
code you posted, no it wouldn't delete the myClip_mc unless you
program it to do so. -
Urgent where i put this code for delete
hi master
sir this code is right for my requirment but when i put on_delete event system not respons or not delete record
where i put this code for conditional deletion
this is my code
declare
recno number;
begin
if :system.cursor_block='accbal' then
delete accbal where accid=:chartofacc.accid;
go_block('chartofacc');
next_record;
elsif :system.cursor_block='chartofacc' then
select count(*) into recno from accbal where accid=:chartofacc.accid;
if recno=0 then
delete_record;
go_block('chartofacc');
previous_record;
else
message ('system found matching record then no delete master record');
message ('system found matching record then no delete master record');
end if;
end if;
end;
please gide me which event i use
thanking you
aamirHello,
The ON-DELETE triger fires only after a COMMIT statment and only for those records that have been deleted in the block.
Francois -
please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!. thanks
Place the iPOd in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
some one can help me please
i have no idea what i must to do.
an unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.The Exception Handler gave all the info that you need. No need to print the whole stack trace.
The exception handler says
Exception Details: java.lang.IllegalArgumentException
TABLE1.NAME
Look in the session bean (assuming that is where your underlying rowset is). Look in the _init() method for statements similar to the following:
personRowSet.setCommand("SELECT * FROM TRAVEL.PERSON");
personRowSet.setTableName("PERSON");
What do you have? -
How to find where the code for append structures for LIS extractors?
Hi,
I found 4 append structures for extractor 2LIS_03_BF,
Out of 4 append structures, I found code for one, using where-used option. But in vain for other 3. Is it possible they didn't transport the code for remaining structures? how to find that?
Cheers,
Kannan NKannan,
When ever you apply a logic to populate tdata for the appended filed then you will be writing some code in CMOD transaction code where you will find a ZXRSAU01
program, just double click on that then it will take you to the complete exit. Ther you can find with your data source name.
Hope it helps...
****Assign Points if it helps******
Gattu -
I forgot the code for my iPhone to access the Home screen I do , please help me
try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appearsHello polo-angulo,
I apologize, I'm a bit unclear on the nature and scope of the issue you are describing. If you are saying that you are getting an error code (3004) when you try to restore your iPhone (because you could not remember your passcode), you may find the information and troubleshooting steps outlined in the following articles helpful:
Resolve iOS update and restore errors in iTunes - Apple Support
Get help with iOS update and restore errors - Apple Support
Sincerely,
- Brenden -
I purchased an itunes gift card for my nephew. I received a confirmation that the credit card had been debited, however he never received a code to activate his gift. Where can I find out the code for my gift voucher?
If you purchased your gift using iTunes, you can resend it. Just follow these steps to resend an unredeemed gift to any address:
http://support.apple.com/kb/HT1541 -
I entered the code for an app. Put my apple id after the code. Dialogue box said downloading, but no app to be found on my iPad 3. Pls help. Thx
The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Unfortunately she has been misdirecting folks with that update bug link for far too long.
Candidly, when you see the Apple ID for a stranger appear in the Mac App Store (MAS) on your Mac regarding an update for an app that you haven't bought, it is a notice that you have a pirated app that you got from an outside source. Some trial version or a "free" version is actually a MAS version that someone has cracked and is distributing.
Finding a pirated app
All MAS apps have a MAS receipt in their app bundle. Check any app acquired from the MAS. Right click on the app's icon in your Apps folder and choose Show package contents. In the Contents folder is a _MASReceipt folder and in that folder is the coded MAS receipt. It has the Apple ID of the MAS account that bought/acquired the app from the MAS. It is that receipt that the MAS uses to alert you that an app has an update. There would not be a notice of an update with someone else's Apple ID showing in the MAS on your Mac, if there was not an app with a receipt from this person's account somewhere on your Mac.
Download the free app FindAnyFile (FAF);
http://apps.tempel.org/FindAnyFile/
This app is easier to use and seems to be more powerful than Spotlight. Open FAF and in the box type _MASReceipt and press Find. It should come up with a list of every app on the Mac with a MAS receipt. Compare the apps with receipts in FAF's list with your purchased apps list in the Mac App Store. The odd app out should be the pirated app. -
Where Do You Put The Un-Ziped Files For...
The manual is unclear.
Where Do You Put The Un-Ziped Files for Contact Sheet X in CS4.CSX v1.4.2 README
INSTALLATION:
If there are previous versions of CSX, be sure to remove them at
this time. Failure to do so may result in 'Copy' errors during installation.
Unzip the CSX zip file into a temporary directory. It's location is
unimportant EXCEPT DO NOT unzip it anywhere your Photoshop application tree.
Run the InstallCSX script in the top-level directory. You can do this by:
1) double clicking it
2) dragging it onto a PS application
3) running it from inside PS via File->Scripts->Browse
If your OS is Vista, you will probably need to start Photoshop using
'Run as administrator' because the installation script needs to install
CSX into Photoshop folders that are normally protected.
If you have more than one installation of Photoshop on your computer, you'll
need to run the installation script for each copy of Photoshop.
When the installation is complete, you can removed the contents that you
unzipped before.
MANUAL INSTALLATION:
You don't need to do this if you ran the InstallCSX script.
If there are previous versions of this script, be sure to remove them at
this time.
Unzip the distrubution file in your Photoshop Presets/Scripts directory and
restart Photoshop. "CSX-1_4_2.jsx" should appear in your File->Scripts menu
in CS2.
With CS3 and CS4, CSX should appear under File->Automate menu as
'Contact Sheet X v1.4.2...'.
Maybe you are looking for
-
Why does InDesign (CS6) run so very, very slowly on my Mac?
Any idea what may be causing InDesign to run like it is stuck in molasses? Everything takes minutes: saving, opening a new document, opening an existing file, importing images, entering text - all slow. Any thoughts?
-
Photoshop on PC and Mac?
Hello, I bought photoshop for my PC desktop. I'm considering buying a Mac laptop and I want to know if I'll be able to use my license to install photoshop on it. I read somewhere that I can install it on two computers, but I'm not sure if the PC/Mac
-
HT201335 Since I updated iOS on my iphon4s and iPad mini i cant get mirroring to work via vga cable
Since I updated iOS on my iphon4s and iPad mini i cant get mirroring via my vga-cabel to my smartboard projector to word anymore. I used to be able to swipe right twice to chose mirroring via my Apple cable. Why doesn't it work anymore? All the threa
-
I have tried and tried to up date my iPod with no success and am now on the verge of tears trying to figure out what to do. I can't re-install my iTunes with the cd I received with my iPod because it says that a newer version is installed, but I can'
-
How do I delete music off of iTunes as well as my iPhone 5
How do I delete music from my phone as well as iTunes