Where do I send my return for the ipad 2?
I am going to return my ipad 2. I do not know where and what postal service to send it too. It does not say it eaither on the apple return page. Does anyone know how i am supposed to send this? USPS or UPS? thanks.
What do you mean "return" it?
As in you no longer want it and want your money back?
See this -> http://store.apple.com/us/help/returns_refund?mco=MTM3NDgyOTE
Note that if your iPad is engraved, you may not return it (except for service).
Or is it no longer working correctly and you want to get is serviced?
Did you complete out a Service request here? -> https://selfsolve.apple.com/GetWarranty.do
Instructions will be shown on how to get it serviced.
Similar Messages
-
Hi how are you i want to replace my iphone 4 with a new one. But i am in Darwin,there is no any apple stores. So where can i send my phone for replacement and how much for that?
Warranty and Support are only valid in the country of origin. You will need to take the device to whatever country it originally came from.
Apple will not accept shipments from outside the country nor will they return it to an address outside the country. -
Where should I send my iPhone for warranty?
If I purchase my iPhone from http://www.apple.com/my/ (Malaysia), where should I send my phone for warranty?
Note: There is no Apple store in MalaysiaThis is how for Malaysia
Service
How do I obtain service for my iPhone?
The iPhone support site has troubleshooting articles to help you solve your iPhone issue on your own. If you have reviewed those articles and still need service for your iPhone, you can contact your carrierif you purchased your iPhone from a Malaysia carrier or contact Apple if you purchased your iPhone from the Apple Online Store. Note: There may be a fee for diagnostic service. Please do not send any accessories with your iPhone because they will not be returned to you.
The blue text is a link to the details -
There is an invalid number of result bindings returned for the ResultSetType
SSIS SQL Task: Single Row Result Set
Code was updated to test for data in target: If Exists Do Merge ELSE Do Insert
Previously was just a merge that Output $Action to @ChangeSum and then @ChangeSum queried for updates and inserts
That all worked but after injecting new code I receive the error There is an invalid number of result bindings returned for the ResultSetType that I don't know what it means or how to troubleshoot.
Inject New Code:
IF OBJECT_ID('tempdb..##TblTemp', 'U') IS NOT NULL
DROP TABLE ##TblTemp
Declare @sql nvarchar(max);
set @sql = @TestForData
exec (@sql);
IF EXISTS (select top 1 * from ##TblTemp)
Begin
--Beginning of existing code
begin transaction;
begin try
declare @MergeQuery varchar(max)
set @MergeQuery = convert(varchar(max), @MergeQuery1) + convert(varchar(max), @MergeQuery2)
+ ' ' + convert(varchar(max), @MergeQuery3)
+ ' ' + convert(varchar(max), @MergeQuery4)
+ ' ' + convert(varchar(max), @MergeQuery5);
exec(@MergeQuery);
end try
begin catch
declare
@Message VARCHAR(4000)
,@Severity INT
,@State INT;
select
@Message = ERROR_MESSAGE()
,@Severity = ERROR_SEVERITY()
,@State = ERROR_STATE();
if @@TRANCOUNT > 0
rollback transaction;
raiserror(@Message, @Severity, @State);
end catch;
if @@trancount > 0
begin
commit transaction;
end
--End of existing code
End
else
Begin
declare @InsertQuery nvarchar(max)
set @InsertQuery = convert(varchar(max),@InsertQuery1)
exec (@InsertQuery);
end
Drop Table ##TblTemp
=================================
SSIS Variable @InsertQuery1:
This variable is executed in SQL Task and the last 3 lines I expect a single row of Insert & Update counts to be returned.
declare @ChangeSum table(change varchar(25));
declare @Inserted int = 0;
declare @Updated int = 0;
While 1 = 1
Begin
INSERT INTO [R_Paid].[BusCodeF454x93]
OUTPUT Inserted.Sta3n INTO @ChangeSum
SELECT TOP 1000 s.*
FROM [R_Stage].[BusCodeF454x93] s
WHERE NOT EXISTS
SELECT 1
FROM [R_Paid].[BusCodeF454x93]
WHERE STA3N=S.STA3N and [BusCodeF454x93IEN] = s.[BusCodeF454x93IEN]
IF @@ROWCOUNT = 0 BREAK
END
set @Inserted = (select count(*) from @ChangeSum );
set @Updated = 0;
select @Inserted as Inserted, @Updated as Updated;"SELECT " + (DT_WSTR,50)@[User::TargetExists] + " = CASE WHEN COUNT(*) > 0 THEN 1 ELSE 0 END
FROM " + (DT_WSTR, 100) @[User::DataDestinationTable]
must do the trick
The T-SQL merge allows both inserts and updates:
MERGE Target AS T
USING Source AS S
ON (T.EmployeeID = S.EmployeeID)
WHEN NOT MATCHED BY TARGET AND S.EmployeeName LIKE 'S%'
THEN INSERT(EmployeeID, EmployeeName) VALUES(S.EmployeeID, S.EmployeeName)
WHEN MATCHED
THEN UPDATE SET T.EmployeeName = S.EmployeeName
WHEN NOT MATCHED BY SOURCE AND T.EmployeeName LIKE 'S%'
THEN DELETE
OUTPUT $action, inserted.*, deleted.*;
ROLLBACK TRAN;
GO
Arthur My Blog -
No response returned for the http request
My application is running on Weblogic 10 in a clustered environment. The UI is a developed in Eclipse RCP.
I have a problem where a particular request never returns from the server to the desktop.
This can be reproduced only in Beta environment and does not happen in Development, Integration or System Test Environment.
I tried thread dumps but there was no thread waiting for this request.
I tried http monitor tool but I am unable to find the cause and solution for this.
Can someone please help me to understand in which situation would this happen and what must be done to overcome this?
Thanks
BalaThanks for replying.
yes, we have put in the logger messages.
The desktop calls Struts2 Action class and the server does recieves the request, processes it (contacts a 3rd party system), recieves the response from the 3rd party system and then persists the necessary information to the database.
After this we have logs to print which Action class took how much time. That also gets printed successfully.
For this process the server took 275 seconds (this is the most time consuming task in the whole app) . After printing this there is no response returned from the server to the desktop.
There are no exceptions and errors.
The fact which is most disturbing is that this is not re-creatable in any other environments (dev, IT,ST) and only in BETA. Though all are clustered environments.
Please help me trace the response. I am ready to implement any ideas. But I want to reach to the root cause. As this is in BETA I am unable to remote debug as well :-((
Thanks
Bala -
Where can I send my iPhone for repair?
Where can I send my iPhone for repair,I live in seng Kang and bought from Apple,not retail
The system suggest to go OCD@Taiseng by QCD
Technology PTE lTD,Leong haut building,is the place correct
For iPhone repair?Contact Apple and find out who provides support in the country where the device originated from.
There is a Contact Us link at the bottom of every Apple website. -
I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions
Options for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
If recovery does not work there's:
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/ -
Where can I buy a case for the iphone 3g 16gb
Where can I buy a case for the iphone 3g 16gb?
YOU ARE KIDDING ME!!!
do u know sth called INTERNET & SEARCH ENGINS??? they been on for some time now and they help a lot!!!
do u want us to buy u the case and give it to you?? and show u how to put ur device on it?? -
Can anyone tell me where to find an install guide for the Liveoffice app.
Can anyone tell me where to find an install guide for the Liveoffice app.
Thanks
JeffHi Jeff,
You can download the install guide for Liveoffice application from the link provided below,
http://help.sap.com/businessobject/product_guides/boexi/en/boXI_LiveOfficeInstall_en.pdf
Hope this helps you.
Regards,
Abhijeet T. -
My iLife v9.03 Install disk is corrupt. Where can I find a download for the the app (not update) at apple support online ?
I have an iLife 11 disc that doesn't work very well so I tried creating a disk image of it with Disk Utility. It took two tries but finally got a disk image that I could use to install the iLife 11 applications. Give it a try.
OT -
Where can I get a eropean prong for the Ipad mini charger in the USA?
Hi, [email protected]
Thank you for visiting Apple Support Communities.
The link below is the World Travel Kit that we offer for our devices to be used domestic and abroad. This can be found at any Apple Retail Store and most Apple Retailers.
http://store.apple.com/us/product/MB974ZM/B/apple-world-travel-adapter-kit
Cheers,
Jason H. -
HT4623 Is there virus protection for the iPad? Where would I find it? Thankd
Is there virus protection for the iPad available? Where would I find it please? Thanks
CathyJ248There are no viruses for iOS currently.
iOS employs security features built into it-mainly sand boxing.
You can not download apps from the Internet, apps cannot make changes to the core system or system wide, apps can access data inside the app itself and a very limited set outside itself.
Sand boxing also prevents AV software from working in iOS.
You can't scan the device from the AV software because it can't access the other apps or their data. -
Where do I put the micro sim for the iPad , I cant find any where to put the card.
What model is your iPad? (iPad, iPad 2 or New iPad). Did you get the AT&T or Verizon model? If you got the Verizon model, it doesn't have a SIM slot.
-
Pls help me in sending sequential responses for the different commands.
Hi all
pls help me in sending sequential responses for the different commands. For example,i have to send the response1 for command1 then again host wll send the some other command ,say command 2 after receiving response 1,then again i have to respond to the corresponding command.i m using the pci-6221 card not tradition DAQcard.
regards,
nitinHi,
you need to be more specific. What is your setup?
Obviously, what you need is a command parser. Look this article for the basics. I know it is meant for RT but the concept is there.
Not sure it will help with so few infos: http://zone.ni.com/devzone/conceptd.nsf/webmain/CD63FD0F746B17A686256F090065F572
Dai
Dai
LV 7.1 - WIN XP - RT - FP -
Where do I register my computer for the one year warranty?
Where do I register my computer for the one year warranty?
If you’re trying to register an Apple product, chances are it’s already registered. Most Apple products can be registered when you turn them on for the first time and begin the setup process. Service and support for your Apple product are linked to its serial number, so it’s OK if you don’t register it. If you'd like to check the service and support coverage for your Apple mobile device or computer, click here.
Maybe you are looking for
-
I have iTunes Match and it's been fine until now. I'm trying to download my music to my phone so I don't have to use the wifi to play it all the time.....but iTunes match won't let me copy from my computer without shutting it off. If I do that then t
-
FontWithName no longer exists?
Yesterday, I upgraded my MacBook Air to Yosemite (OS X 10.10) and this subsequently triggered an update of some parts of Xcode. I do not know any details about what this automatically triggered update did. I am using Xcode to develop an iOS-app. Now,
-
Hello Friends, We are implementing MM-SUS functionality and facing some issues. Could be very generic for those who have already worked on it so would need your help to fix these. 1. Once the PO is created and submitted to Supplier , he is able to se
-
Video blog works with safari, but all of a sudden firefox NOTHING
Hey gang.... www.danhproductions.com.....on the demo video section always came up no problem...just noticed on my firefox it will not show the video blogs and says at the bottom: # Exception: TypeError # Message : localizedSpans.each is not a functio
-
Jython having issue importing weblogic modules for changing passwords
I am trying to import some WLST modules into a Jython script as outline in the documentation at http://e-docs.bea.com/wls/docs92/config_scripting/config_WLS.html#wp1019971 The strange thing is that it says it is a WLST script, but it appears to be a