Where do I set UIX Range?

I have created a uix page in which I have dropped in a read-only table from the data control palette. Everything is working fine, however I would like to display more than the default 10 records per page. However, I can't seem to find anywhere to set the range to accomplish this. Thanks in advance for any help!

I figured this one out:
Under the view controller>application sources>view section in the navigator, click on the appropriate xml file relating to the view you want to change the iterator range for.
In the structure window, you will see the iterator object for that view. Click on that, then in the property inspector change the range value to whatever you want to display per page. Or just edit the xml file directly, which it doesn't seem that you can do from within jdeveloper, but you can within notepad, etc.

Similar Messages

  • Where should I set up my FTP server if I have no money to spend? I would prefer if someone answers this quickly as I want this site up and running soon.

    Where should I set up my FTP server if I have no money to spend? I would prefer if someone answers this quickly as I want this site up and running soon.

    Ethmoid is right... There ARE free web hosts, but... as the old saying goes "You get what you pay for" and if you pay nothing?
    Most free web hosts are riddled with ads, and some are even hosts to malware. DO YOUR RESEARCH before committing to anything.
    While some ISP's do provide free hosting, there are limitations with many of them, such as monthly bandwidth and file storage. You may not be able to get your whole site upto the server (depending on how big it is), or it may be down several days a month due to "excessive" traffic. Again - DO YOUR RESEARCH before committing to anything.
    There are also a lot of services that run in the range of $4-7 a month for feature filled, bandwidth enabled hosting. Dreamhost is offering two domains for $3.95 a month right now. I use ICDSoft (have since 2003) and they're $7 a month, but they offer a lot for that.
    Lastly, you want to look at SUPPORT. If your site goes down, and your "free" host is nowhere to be found.... It's as bad as having no site at all, if you cant get it fixed and no one can access your URL for days on end.

  • How do I set the range of pitch bend for the EFM-1?

    Hi folks,
    I have a simple patch for my EFM-1 and I want to apply a pitch bend in Mainstage.  It is presently set up to go a whole step up or down when the pitch bend is pushed all the way up (or down).  I probably set it up that way.....but I can't for the life of me remember how I did it, or how to change it.  For this particular patch, I need the pitch bend to go an octave.  Where do I set this usually easy-to-find parameter?  Is there a global setting?  (It seems to be set for a whole step for all patches).  A setting within the EFM-1?
    Thanks!
    -Mike Kaplan

    Hi
    Mike Kaplan wrote:
    Hi folks,
    I need the pitch bend to go an octave.  Where do I set this usually easy-to-find parameter?  Is there a global setting?  (It seems to be set for a whole step for all patches).  A setting within the EFM-1?
    It does not look like there is a Bend Range parameter for the EFM1???
    CCT

  • Where does one set space after paragraph in the new Pages 5.0? It used to be under text in the Inspector in the previous version, but I just can't find it in this new version.

    Where does one set space after paragraph in the new Pages 5.0? It used to be under text in the Inspector in the previous version, but I just can't find it in this new version. Paragraphs seem to only be dealt with in styles, and the Formatting window for text doesn't seem to have the space after paragraph contrtol that the older Inspector had. What am I missing?

    Sorry I did this without looking:
    Side panel >Text > Style > Spacing > Turn the triangle > Before Paragraph/After Paragraph/
    This is the trouble with the Peeky Boo Contextual Interface that so many wiser heads than mine love to love.
    Peter

  • Missing Functionality -where do I set a budget for a Project?

    Budgeting for Projects is non - existent
    Budget for Profit and Loss for a particular project , How is it done ?
    Does not work , No facility to put in Budget for a project ?
    The report I am trying to run is:
    REPORTS>FINANCIAL>BUDGET REPORTS>Profit and Loss Statement Budget Report.Then go to Expanded and choose a PROJECT, say MailOrder.
    The result is that it will show the MailOrder project for the ACTUAL but it will show the whole company Turnover against the BUDGET column.
    This is because there is no place to set a budget for MailOrder Project in the first place. So the question is where do I set a budget for a Project?
    1 Budget setup screen - this has no facility to setup a budget for a PROJECT
    2.Budget Profit and Loss - this has the facility to run a PROJECT budget but the figures for the Budget cannot be right because they were not setup in the first place.
    PS MailOrder project is just an example.
    Version: SAP BUSINESS ONE 2007 A Patch Level 41
    Description of requirements: As above
    (Valid as of: (Date that this legal requirement is applicable) N/A
    Business needs: Customer cannot set the budget for a project and this effects their accounting.
    Examples: (Please describe a typical example, how the functionality should work.)
    Current Workaround: None.
    Proposed solution: Create a Project and then be able to set a Budget for it
    Edited by: Darpal Thiarha on May 14, 2008 10:34 AM

    Hi Darpal/Kerstin
    Please ignore my previous replies because I have now worked out why this idea will not work:
    Kerstins' idea is based on setting up new Nominal Codes for every Project and for Every Nominal Code in the Profit and Loss structure. Apart from the fact that this will create a messy Nominal Structure with hundreds of Nominal Codes, the main issue here is the way the Cost Of Goods Sold is structured. The logic of our Nominal Structure for Sales and Cost of Goods is based on Item/Item Groups and the Nature of these Items. In our case we sell Skin Care products under 3 Brands. Say Brand A, B and C
    So Brand A is summarised into one item Group and the ITEM GROUP is coded to Sales Nominal 20000 and the Cost of this group is coded to Nominal 30000. In Kertins suggestion, I would need to raise a Nominal Code 20001 for say Project Mail Order and 30001 for the Cost of Goods for Mail Order but this the Mail Order project is selling ALL our brands (A,B,C) - so you can see the problem here. You cannot use Nominal Codes for two different purposes and make it work. So the problem here is that my BRAND A summary will contain a Nominal with a Project Mail Order, that has SALES of Brand A,B,C. The Net effect will be that we will not be able to summarise anything in SALES and Cost of SALES in a logical way (Neither by Brand or By Project) and the Nominal Structure will be a mess.
    My conclusion is that SAP b1 Sales and Cost of Goods section demands certain logic when building the Nominal Codes, and this is based on the NATURE OF THE STOCK ITEM and trying to superimpose the PROJECT issue into this, will never work. In my view, the PROJECT issue needs to be sorted without involving New Nominal codes and the starting point would be in sorting out the SALES and COST of SALES and the project Budget for this.
    Please let me know if you need further illustration of the problem.

  • HT1677 Where can you set default in Safari to view as web page instead of Mobile Version?

    Where can you set the default setting in Safari to open page as web page instead of Mobile Version on iPad running iOS6.01?

    And, to make it even more fun, sometimes a website changes how it deals with Safari Mobile. A website that treated it like a desktop browser suddenly starts treating it like a cell phone. Just to mess with you. Or push an app.
    Best of luck.

  • Where do I set up rules for conflict resolution when syncing iTunes with Outlook?

    I just got an iPhone 5 and I'm coming from a Blackberry.  I've been syncing Outlook Calendar and Contacts to a portable device for over 10 years, even back in the day of the pocket pc and more recently the Blackberry.  My iPhone 5 syncs great and seemlessly with Outlook using iTunes.  I've had no issues as of yet.  The problem for me is, it just seems "too" easy.  I didn't see anywhere where I could set rules for conflict resolutions.  For example, if your pc says one thing but your iPhone says another, who wins and supercedes the other?  What if by accident your iPhone loses all of its data, then iTunes syncs with your pc - will it delete all the Outlook data on your pc because it thinks it's syncing with updated data from your iPhone?  (in my case data I've had for over 10 years) 
    With the Blackberry software it asked you to set up rules for conflict resolution when first connecting the phone (including an option to ask you first).  In my case, I chose to have it ask me whenever it discovered a conflict.  So whenever I synced, it specifically alerted me exactly how many items are being synced, and then if there were any conflicts, it'd stop and then ask me which device I want to supercede the other.  This gave me a lot of piece of mind.  Now after getting my iPhone and using iTunes to sync, it's been great so far but I have to say that I don't have as much piece of mind.  Does anyone have any feedback on how to set up conflict resolution with iTunes and Outlook or does it not exist at all?  Again, what would happen if there was a conflict between the two devices? 

    Yes! Thankyou for that. I had of course put the context.xml file in the web-inf directory.
    I followed your example to the letter and it still wouldn't work. Or rather, I followed to the letter expect for the difference between "WEB" and "META".
    Once I worked that out, it started working like a dream.
    Note to anyone else who has a similar problem, make sure you REALLY look at the answer given. Make sure you REALLY do have all the files in the suggested places. It will save you time.
    Thanks again.

  • Setting duration a slide stays on screen, where is this set in Keynote 3?

    I want to know where do I set the duration of how long a slide stays on screen before it advances? What other settings affect duration? Are the setting for the desired time a slide stays on screen preserved when I export to a Quicktime movie?
    As always thank you for your time in reading my post,
    Sebastian

    The duration is actually set for the transition. The longer the delay for the transition, the longer the slide stays up. The qt export timings are sometimes off, especially when you're using QT movies on your slides and timing things to them. Most of the time though, things work okay.

  • How to set the Range size dynamically in an Iterator?

    Hi,
    One of my scenrio, i read the range size of Iterator and i performed the business logic validation. But in my case, range size is changed as per business requriement for a paricular Iterator.
    Is it possible to set the Range size property dynamically in an Iterator of pageDef File.
    I'm using JDeveloper 11.1.1.3.0
    Can anyone help me regarding this???
    Thanks & Regards,
    Perumal S

    Good afternoon,
    This works: f?p=1:#MYPAGENUMBERCOLUMN#::Session:Request:Debug:Clearcache:itemname:itemvalue:printerfreindly
    It works very well. I have been struggling for a couple of hours trying to figure out how to calculate the page number I wanted to link to from a report column defined as a linked item. I ended up modifying my VIEW to include the page number for that particular type of data and use this technique to jump to the correct page.
    Thanks for posting this. Nothing else seems to work.
    Don.

  • Where can i set up connection in "exec sql"?

    i have code block like this:
    EXEC SQL.
        SET CONNECTION :'PA'
      ENDEXEC.
      IF SY-SUBRC <> 0.
      Connection not yet opened.
        EXEC SQL.
          CONNECT TO :'PA'
        ENDEXEC.
        IF SY-SUBRC <> 0.
          write: / sy-msgid ,sy-msgno,sy-msgty,sy-msgv1,sy-msgv2,sy-msgv3,sy-msgv4.
          write: / 'connect error'.
           RAISE EXCEPTION TYPE cx_sy_native_sql_error.
        ENDIF.
      ENDIF.
    where can i set up the 'PA'?thanks very much!!!!

    You set  up new databse connection for SAP to communincate with using 'DBCO' tcode.

  • Where do I set the polling frequency for Technical monitoring in Solution Manager 7.1 SP10 ??

    Hi All,
    I am customizing my technical monitoring templates and would like to know :
    1. Where we can set the polling frequency for each metrics for triggering alerts through Technical monitoring in Solution Manager 7.1 SP10 ??
    2. Is it like each time our threshold is breached, it will send an alert irrespective of polling frequency ??
    I know the data collection interval time for each metrics in technical monitoring template but the as per my observation the polling frequency is different.
    Need your guidance.
    Regards,
    Manish K

    Hi Javier,
    Refer to the documentation 'MAI Alert Consumer BAdI Interface' under
    http://wiki.scn.sap.com/wiki/display/TechOps/Alert+Consumer+BAdI+Interface link for information on the input to the BAdI.
    Kind regards,
    Roland

  • Where to find set up my iPad?

    Where to find set up my iPad on THE iPad? Or it has to be connected to an Apple computer?

    Setup new iPad
    1. Turn on iPad
    2. Set Language; tap Next
    3. Set Country; tap Next
    4. Enable Location Service; tap Next
    5. Setup WiFi (connect to internet)
    6. Setup as new; tap Next
    7. Sign-in with Apple ID
    8. Agree with Apple Terms and Conditions
    9. Enable iCloud
    10. Enable Find My iPad
    11. Register iPad
    12. Start using iPad

  • Where is the setting in LR 2.0 to turn on the view the embedded jpg file instead of rendering a thum

    Where is the setting in LR 2.0 to turn on the view the embedded jpg file instead of rendering a thumbnail image from the RAW file?

    Doug, this is a user to user forum so you get advice here from other users just like yourself.
    AFAIK LR will show the embedded jpeg until it renders its own preview after that there is no way to get it to show the embedded jpeg.
    When you are importing photos into LR in the import dialog box there is an option to show a preview of the embedded jpeg while the import is actually taking place.
    Also this is the regular LR user to user forum and there is a link to the LR 2.0 Beta forum at the top of this forum. Maybe its best to post your question there.

  • Where can i set the location of the LogonTicket cookies in the visual admin

    hello:
       where can i set the location of the LogonTicket cookies in the visual administrator?
    thanks!!

    Hi,
    When the SAP LOGON ticket Expired or if we need to update the dates, it is generally done at the Visual Administration Level. SAP Logon Ticket is represented as cookie in the Browser which will help us for SSO.
    In Visual Admin under keystore admin where our Old Portal certificate exists.
    We will need to delete the old portal certificate, then we need to generate new ceritificate and a pop box will appear.. where we need to provide our System details like SID, Client. After these details are given we can get a new certificate in which validity period dates are automatically generated. And also we can import teh same into Portal at Sys Admin->sys config->key store admin for it to be available as .PSE or .DER file for SSO.
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/59bba290-0201-0010-468b-cd12efda573a
    check the above for EP security guide which might help you in the same.
    Regards,
    Ravi

  • Where can I set the window dimensions for the "Java Applet window"?

    Hi,
    When I run a form on the web, the Java Applet is loaded and the form appear in the window. But "base window" have gived dimensions indifferent what dimensions has the window of the form which I run.
    So, where can I set the dimensions of the "core window" which is behind the MDI window of the application?
    Thanks in advance,
    Eugen

    Eugen,
    in formsweb.cfg you will find parameters "width" and "height". You can set absolute values in pixels or "relative" in percent.
    width=800
    height=600
    or
    width=100%
    height=100%
    Gerald Krieger

Maybe you are looking for