Where do I view discussions which I have participated in?

Where do I view discussions which I have participated in? They aren't listed with the ones that I started myself.

Hi, Timothy -
You can also set up your own personalized homepage which will show that information.
To do that, click the large-face "Apple Support Communities" legend at the top of this page. You'll be taken to the site's generic homepage.
Then click the tab Your View. You'll be shown a different array of things. On that tab is a small "personalize" link - click it, and you'll be taken to the setup area for Your View.
Ignore the Layout choices for right now.
The basic means of adding a widget (a section on the page) is to use the hierarchical menus in the blue area near the top to get the one you want displayed in the right-hand space of that area. Once it is displaying there, grab the green box and drag it down into the lower area - the background will highlight a pale green indicating where you can drop/place that item.
To get rid of a widget already placed - click the small reveal triangle in the widget's header, and choose 'Remove this widget'.
I would suggest getting rid of the section Recent Content and replacing it with Your Content or with Watch A User  - both of those are accessed via the Content item in the menus. Both of those show pretty much the same thing provided you set Watch A User to watch you. Both will display all discussions (threads) you've posted in, whether it is a discussion you started or one you added a reply to. They are shown in chronological order based on recent activity in that discussion by anyone, most recent on top. How many are displayed depends on how you set the pref for that widget.
You can use the Edit This Widget choice in a widget's reveal triangle menu to set things like number of items to be shown, etc.
Once you've got things set up the way you want them for the moment, click the Publish button.
You can fiddle with how things look to your heart's content. Even after you've got Your View set up the way you like it, you can try out different things. If you don't like the way they look, just click the Discard Changes button and you'll be returned to the last arrangement you published.
If you want that personalized page to appear anytime you go to the forum homepage link, after publishing your personalized page and with the Your View tab active, click the 'set as default tab' link just to the right of that tab.

Similar Messages

  • Where can i view the pictures that have been uploaded to my cloud?

    Where can I view the pictures that have been uploaded to my cloud? when i log onto icloud it doesnt give me the option to view photos

    How were the photos "uploaded"? If via backup or Photo Stream, they aren't viewable online. If you turned on iCloud Photo Library (beta) you should see a Photos app at iCloud.com
    More details at iCloud Photo Library beta FAQ - Apple Support

  • Where can I view threads. I have lost an email and can't find it. It was there and disappeared??

    When I opened my emails a particular email was there unopened. I clicked on it to check what it was about and clicked off to check another email. When I went back to read it properly it was not there but a caption related to the email appeared at the bottom of subsequent emails that I opened to read. I have been unable to locate the email to read it properly and can not find where it has gone.
    Could you please advise how I may locate and access it.
    thank you
    Sharon

    If you didn't set up Find My iPhone on your phone before losing it, then unless your cell carrier offers a tracking service, something you again usually need to set up before the phone goes missing, there's no way to trace it. Notify the police and change any appropriate passwords.
    Regards.

  • Where to find a password which i have forgot

    Hi all ,
    I forgot the pw to enter into sqlplus . Please let me know how can i find it.

    If ur talking about SYS user, and if you have windows OS, and if you can work on the server, change sqlnet.file entry of AUTHENTICATION_SERVICES to SQLNET.AUTHENTICATION_SERVICES= (NTS) and login to sys user as dba with ANY password, then change it to your choice, for any other user, ask your DBA to change the password. For other scenarios, wait for more replies.
    *009*
    Edited by: 009 on Sep 2, 2010 12:08 AM

  • I have some loops from acid 5 which I have dragged in a folder to the loop browser.  Some of them retain the folder name in the View: and some don't.  I have had some that seem to go in but I can't find them.  Where should I look?

    I have some loops from acid 5 which I have dragged in a folder to the loop browser.  Some of them retain the folder name in the View: and some don't.  I have also had some that seem to go in but I can't find them.  If I try to add them again, I get a msg that they are already there.  Where should I look?

    It may be best to recreate the folder and the smart playlists from scratch.
    tt2

  • When i go on to hotmail on my iphone 4s i am unable to view messages in my subfolders which i have created. When i go on to my laptop and go to hotmail i can see them there. Please help

    When i go on my iphone 4s and go to my hotmail I cannot see the messages in my subfolders which i have created, however when i go on my laptop and go into my hotmail the messages can be viewed there. i have seen some discussions and solutions on how to view them so I tried adding an account being the microsoft exchane i put in the required info and it tells me it cannot create account that an identical hotmail account already exists... i may have done something wrong the first time i tried and somehow it has my info but nothing has worked...Please help me.

    Delete the account from you iPhone first (Settings>Mail,Contacts,Calendars>tap the account, tap Delete Account), then try setting it up as an Exchange account (see http://www.howtogeek.com/howto/32784/sync-hotmail-with-your-iphone-or-ipod-touch -with-exchange-activesync/).

  • HT1399 I have 11,000 songs on my iPod Classic but since downloading the new itunes software I am having trouble locating where I can view my full collection of songs. Can anyone tell me where I can view these please?

    ! have 11,000 songs on my iPod Classic but since downloading the new version of itunes software I am having trouble locating where I can view my full collection to edit/delete. I can add music and see the additions cannot see the full list. Can anyone tell me where I can view them please?

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • What does backup mean? i want my previous data which i have been backed up. i lost my previous data from phone and my back up too.i want my previous data now.apple should make a system where backup keeps all history from 1st to last.

    what does backup mean? i want my previous data which i have been backed up. i lost my previous data from my phone and my back up too.i want my previous data now.apple should make a system where backup can keeps all history from 1st to last.when new back up done, new back up should keep previous back up or old backup with it. by which when i restore my phone i can have my data from 1st to last.
    i am feeling sad that my all text were gone. that was very important to me.

    Follow the steps in wjosten's post here: https://discussions.apple.com/message/13356770#13356770 (for Windows, substitute Outlook in step 2).

  • Previously I could view my appointments/reminders in my calendar.  This feature is no longer available.  I know I have a reminder in the year 2020.  Where can I view my appointments/reminders?

    Previously I could view my appointments/reminders in my calendar.  This feature is no longer available.  I know I have a reminder in the year 2020.  Where can I view my appointments/reminders?

    Reminders is a separate app from Calendars.
    Appointments are in Calendar and remonders are in Reminder.

  • Eversince I updated my iphone 4 to IOS 5.0.1, sometimes I get a 'No Service' or 'Searching'  signal where my network signal should be upon which I have  to 'Reset all Settings' to get the phone normal again.Is  there a solution to this?

    Eversince I updated my iphone 4 to IOS 5.0.1, sometimes I get a 'No Service' or 'Searching'  signal where my network signal should be upon which I have switch the phone off then on then 'Reset all Settings' to get the phone normal again.Is  there a solution to this?

    I couldn't find the edit button on my original post so I am posting an update here.
    I have gone through more apps and have had good luck on all but one more.  And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should.  On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much.  I will post a note in the app store to let them know.  I really like the Yahoo app better than the new stock app.
    I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine. 
    Starbucks app works as it should. 
    I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

  • I need MS office for Chinese online banking.The Apple website says the Air can use the latest MS Office if it has a 32bit processor, but the tech specs dont say which Airs have a 32bit processor.  Where can I find out?

    I need MS office for Chinese online banking.The Apple website says the Air can use the latest MS Office if it has a 32bit processor, but the tech specs dont say which Airs have a 32bit processor.  Where can I find out?

    john howkins wrote:
    Thanks, but the website says I need a 32 bit processor so presumably a 64 bit processor is no good? Or can a 64 bit automatically do everything a 32 bit one can do?
    Where is the link that says you need a 32 bit processor?  On my MBA, in the past I've ran both Office for Mac and Windows 7 (MS Office) via Parallels (Bootcamp does the same thing).  I chose installing Windows 7 in the 32 bit mode ONLY because I have a couple of other legacy Windows programs that only run in 32 bit mode.

  • I recently changed computers and would like to re-install Photoshop Elements 10, which I have previously purchased.  where would I find that download?

    I recently changed computers and would like to re-install Photoshop Elements 10, which I have previously purchased.  where would I find that download?

    Hi There,
    Kindly check the below mentioned link to download PSE 10.
    Download Premiere Elements products | 13, 12, 11, 10
    Thanks,
    Atul Saini

  • Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk.

    Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk. I press the :c" button on startup but its not picking up the disk in the rom, i have tried to put the disk in an external rom but same answer, am starting to think that my os disk is bad. Please help me.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    *Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • How to map the node which i have created dynamically into the view

    Hi All,
    Many thanks to all ur answers in advance.
    I have created a node dynamically.I want to display the fields which i have fetched in that node.
    i dont know how to map the node which i have created dynamically into the layout of the view.
    Other than Using ALV is there any other way to do.
    for example usin table control

    Hi,
    use the reference variable of view to access the corresponding UI element and then use the method of that UI element to do data binding with context node.
    for ex:
    Context node = flights
    element = inputfield, ID = inp_name
    data view type ref to if_wd_view.
    data lr_inp type ref to cl_wd_input_field.
    lr_inp ?= view->get_child_element( ' INP_NAME' ).
    use following methods of input field to define the data binding.
    SET__DDIC_BINDING( )
    BOUND__PROPERTY( ).
    BOUND__PRIMARY_PROPERTY( ). " for input field it is value property.
    Get the reference of view from wddomodifyview method as importing parameter(view). Store this parameter as controller attribute.
    Thanks,
    Rahul

  • I am trying to reset my 4s iphone to the original settings and erase all my content. It is asking for a passcode which i have not used before. How/where do I get the passcode?

    I am trying to reset my 4s iphone to the original settings and erase all my content. It is asking for a passcode which i have not used before. How/where do I get the passcode?

    It needs the restrictions passcode. You or someone with physical access to the phone had to set it. It can not set itself.

Maybe you are looking for

  • How to Get My Dashboard as Default Page Instead of Home Page in OBIEE 11G?

    Hello Gurus, I have one requirement where i need to change default page to "My Dashboard" like what we had in OBIEE 10G ? Rite-now in OBIEE 11G when any user logs in they are directed to "Home" Page, but i want to change the navigation to "My Dashboa

  • F110 - Grouping of downpayment with invoice

    Hi SAP gurus, For a vendors , we have downpayment for  20000 and invoice  for 10000. Both the downpayment and invoice have same due date. We have also configured that the sp Gl indicator allowed for payment in FBZP. So when we run the APP , the syste

  • Premiere Pro CC 2014 Crashing on Start Up

    After installing Premiere Pro CC 2014 on my mac i opened the app but with in seconds of opening its crashed with this message '[/cloudroom/releases/2014.09/shared/adobe/MediaCore/Utilities/QTParser/Src/QTTrack.cpp-5 08]' It does this every time i ope

  • Why am I unable to Configure Database Mail?

    To Anyone who can help -- I am following the self-paced training kit for Microsoft SQL Server 2008 Implementation and Maintenance written by Mike Hotek and have entered the following code as requested:  ( Note that I have italicized the code & messag

  • Customised Error Message for ESS-MSS Applications

    Hello All, Currently, if there are any errors in the ESS/MSS transactions, we get the 503 error with lot of irrelevant data to the users. We have a basic html page which says, "There is a issue-Please contact XXXX". Is there a way to replace the stan