Where do I view the space left on my external hard drive?
Where do I view the space left on my external hard drive?
If you have the status bar turned on in the Finder, you can view it there when you select the disk.
Otherwise, Get Info on the external.
Similar Messages
-
Where can I find the files using up my external hard drive?
I have a 1TB iMac and have two external hard drives attached to keep the computer free of hard drive use for two reasons: Disk 1-is a 250GB hard drive I have dedicated to perform Time Machine backups of my home folder. Disk 2-is a smaller 120GB hard drive I keep my compete iTunes library of music in case the computer has a malfunction, so all the work I've done putting the library together will be secure. Here's the thing...the iMac's hard drive is hardly used, just as I want containing about 150GB total. Meanwhile, the Time Machine disk is nearly full with 225GB used, and just 25GB remainibg. The hard drive with the iTunes files looks pretty good too using about 70GB of it's 120GB. I believe Time Machine is in no way, backups the iTunes library just the iMac.
How can I figure out where the additional space is getting used up on that disk? I do have a couple of extra logins I use for alternate use such as a different iPhoto library I want kept seperate from mine, but I did not think the backup was saving those files as they are not even under the Time Machine setup.
Can anyone advise why the backup is larger than the use of the computer? I knew when I dedicated a smaller hard drive to back up a larger one that it was possible the backup drive would get too full, but I can figure out what's happening. I've erased the Time Machine disk and allowed it do a completlely new backup and again, it's always sigificantly larger.
Thanks!Okay...I have some more information and perhaps we are getting closer. On the 250GB, first I went into that disk and used Disk Utilty to re-format it once using Mac OS Extended (Journaled) then a second time, zeroing it out. I did a screen shot to review if needed, and both times it looked perfect...249GB available. Then I went into the Time Machine preferences to get ready to backup again, and it had not excluded the other external 120GB with iTunes so I excluded it. I may has previously, never noticed in that screen that it takes a bit of time for it to calculate the information to save. I may have just clicked on it quickly without reviewing it first. Today I did, and gave it time to calculate. At one point the actual 250GB itself, showed up and I excluded it too like the 120GB. After it finished, the calculations are still it wrong - claiming it has a 200GB backup when the iMac either contains 150GB (based on when I do Get Info) on it or from OmniDisk which calculated about 100GB. I have not allowed Time Machine to do a backup yet, until this discrepancy can be clear.
One thing that I thought I had seen or reviewed previous on the Time Machine settings was my home folder - I could be wrong but wanted to mention that. Another little tidbit to ponder an well is that I have a files of icons that I use for the Hard Disks, and a few folders where I Get Info on the Icon and on the destination and just cut and paste. I did that today to the 250GB after zeroing, but while I was in the Time Machine settings the change was deleted and neither the manufactures icon was there nor mine, and it has the default blue-green one the software uses. I know, because my sister's is that way on her system-unchanged.
Feedback? -
Can I view photos and movies from my external hard drive? I used Time Machine and a WD Passport for backup. Since my drive on my MacBook Pro is filling up I was planning to delete some of the movies and photos. I wanted to see if I could view them from the hard drive. Thanks
Hello, eco1.
Thank you for visiting Apple Support Communities.
This sounds like you are wanting to move your iTunes media folder to an external drive and have iTunes this folder from this location. If this is the case then I would recommend taking a look at the article below.
iTunes for Mac: Moving your iTunes Media folder
http://support.apple.com/kb/ht1449
Cheers,
Jason H. -
how can I change the desktop icon for an external hard drive. Using LaCies and Dimple hard drives.
One of the things I've found with OS X (at least with Snow Leopard, which is my first excursion into OS X), is that all too often the thumbnail displayed on a file, whether a file created or one downloaded, is a false thumbnail. That is, when you do a Get Info on the file the icon in the upper left is the generic icon for that file type, rather than the thumbnail displayed in Finder. Makes it a bit difficult to copy.
Apparently Finder uses Preview in the background to generate the displayed thumbnail without actually creating one.
What I've resorted to doing, particularly with graphic images, is to process them with GraphicConverter - I have its prefs set to automatially add thumbnails and previews. With an individual file this means opening it in GC and doing a Save As. However, a much easier and faster way is when there are two or more such files; I put them in a common folder and drop the folder onto GC. GC then opens them in a catalog view, in the process adding real thumbnails and previews to each automatically. Doesn't take long to do several hundred files that way. -
On imac 10.6.8 using current version of Aperture. How can I access the Aperture Library on my external hard drive that I use with time machine for backup? I can only access the application but not the library..
Go into Time Machine (the program not the bundle on the extrnal disk) and using Time Machine's browser go to the Folder where the library lives. You could look in the library bundle in Time Machine but that won't really tell you much,
If you want to make sure it truely has backed up your library you will need to restore it and open the restored library with Aperture.
If all this still has you confused you need to read up on Time Machine in order to get a feel for how it works, for what it is doing and for how to restore files from it. -
I recently moved my Aperture Library file to an external hard drive. Can I now create a vault to be saved on my Time Capsule for the Aperture library on this external hard drive?
One thing to bear in mind, if you are using Time Machine on your Time Capsule and have it set so the TM backup includes your external drive, you will effectively be backing up your Aperture library twice on the same drive, once with Time Machine and once with the vault. This isn't a problem unless you start to run out of space.
Another thing to note, vaults on network drives used to be flaky (i.e. not really supported) and required workarounds to be able to use them. I'm not sure if this has changed, but I just managed to create a vault on my TC ok. -
I was trying to move my photos from the iPhoto library to an external hard drive. I now have a desktop display of thousands of cascading photos. How do I remove them from my desktop screen?
Strangely enough we can not see you so it really helps if you share with use exactly what you have, exactly what you did and details about the problem
what version of iPhoto and of the OS? What exact steps did you do? where are you seeing these "thousands of cascading photos" now and using what software and what exactly did you want to accomplish
The correct way to move your iphoto library to an external drive is to verify the drive is formatted Mac OS extended (journal) and then drag the iphotl library intact as a single entity to is
The correct way to move some or all of your photos is to select them in iphoto and export 9file menu ==> export -- https://discussions.apple.com/docs/DOC-4921 ) to the external drive
LN -
Download the creative cloud apps to external hard drive?
Hello,
My wife just purchased the creative cloud, but our home connection is horrible.
I need to download the huge files to an external hard drive here at work where we have a fast connection.
Then take that hard drive home to install them on her Mac laptop, where she can plug in her license information.
I went and tried/followed all the online adobe help, but there still was no place/menu I could find where I could *target the download* to.
This should be easy ... right?
Please help.
Thanks in advance,
[email protected]Hi christiswimmer,
With respect to the issue that you are facing , my suggestion would be to download the product from Adobe.com/downloads as a trial version and save it over to your Hard Drive . Once you are at home , you can simply connect the same hard drive to the wife's mac and install the same . it would get converted to a full version during the installation as soon as you enter the Adobe id and Password .
Hope this helps,
Kartikay S -
And how do I turn off FACES?
I copied the iPhoto library to an external hard drive, then imported it to the new iPhoto. It turned my 2000 photos into 12,000!!
According to you youo did not do what I instructed - you said you imported the old library into th enew library which can easily take a 2000 photo library and turn it into 12,000 including two ro three versions of each photo pus all the face thumbnails
The correct procedure has NO importing involved
drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac
That is it
LN -
i am using for first time the time machine and an external hard drive because I want to erase my macbook and start from zero files. Am i keeping my files in the portable hard disk when I will connect it again with the macbook or the time machine will erase all?
I would like to know if after I erase all my data, empy hard drive inside the macbook, the time machine will erase all my files that I have saved in my "WD "My passport" external hard driveWelcome to Apple Support Communities
Time Machine has to erase the external disk in order to make backups. Before setting Time Machine up, copy the files of your external disk to the hard disk of the Mac in order not to lose them, and then, set up Time Machine. The first backup will start automatically.
If you want more information about Time Machine, read the Pondini's site > http://pondini.org -
I was just about to order a photo book, using photos stored on an external hard drive. I organised the book and pressed 'buy'. IPhotos instructed me that I needed to upgrade and so I went on the ASpp store, bought the upgrade and installed as directed. I then used the iPhoto Library upgrader as directed.
After the iPhoto upgrade I can no longer access the photos stored on my external hard drive. I am able to access the photos stored on my internal hard drive - the remainder (including the photo album) seem to have vanished into thin air.
Any suggestions please?What format is the external drive?
-
I just purchased a new computer that runs windows 8 and it doesn't want to recognize the time capsule as an external hard drive (ie doesn't show up under my compter). I've downloaded and run airport utility, but it seems to have a hard time finding the time capsule...maybe one out of 10 times it will find it.
What's more, when I look under network infrastructure under the control panel, it shows my Broadcom ADSL centurylink Router...so I'm wondering if my modem/router combo is overriding the router function on my timecapsule and the time capsule is not being used as a router...
Any help much appreciated!In this case the TC should be in bridge mode.
Win8 is still problematic. Try using ethernet instead of wireless. I think the drivers are poor still and it is well worth having a try via ethernet if you haven't already.
Otherwise you will need to wait for apple to release bonjour for windows 8 and airport utility.. which is not out yet.
Also make sure the windows is set to home, not work or public.. even turn off the firewall.
Open windows explorer and type the TC ip address into the address bar.. (none of which is perhaps the same.. I gave away windows at vista.. shudder)
\\TCIPadderss. -
I just bought a new Mac and I want to transfer some data (not all) from my old Mac. Basically, I want to move my itunes library, iphoto library, and a few documents. I have not even turned on my new Mac yet. Is the best way by an external hard drive?
If both have Firewire ports then you can accomplish your goal by using Target Disk Mode. If this is not possible then you can do using an external drive or if you have a local network connect both to your network and use filesharing between the two computers.
File Sharing on Macs
Mac 101- File Sharing -
I want to use the Thunderbolt connection for an external hard drive
I want to use the Thunderbolt connection for an external hard drive - so what port would I use on the MacBook Pro 13" for the display monitor. Thank you!
This is not the forum for MacBook Pro owners.
You just need to reformat the drive in Disk Utility and erase the drive and have Mac HFS.
If you did need to use NTFS then you would not want -3G but Paragon NTFS for OS X x. 10.0
Or buy something that isn't pre-formatted to Windows NT file system.
First though make sure you have backups of your system. TimeMachine being used now?
http://macperformanceguide.com/Mac-TimeMachine-drive.html
http://www.apple.com/support/timemachine/
Maybe cleanout some files you don't need.
Install a larger notebook hard drive even.
http://www.macsales.com/firewire has a lot of choice in Mac compatible drives and enclosures so you don't need to worry about Fantom not working at some point.
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard -
Hi everyone,
Before I set up my new iMac, I transferred all my important files from my old windows computer (pictures, documents, iTunes etc) onto an external hard drive. I had no trouble using and locating my hard drive on my old computer, however I'm having great difficulty finding it on my iMac. The external hard drive is plugged in with all wires connected and correct. I've tried all the USB ports and I still can't locate it!
I just want to transfer everything from my hard drive to the iMac!
If anyone could help me locate and guide me through the process of using an external hard drive on an iMac, then that would be brilliant!Try using Migration Assistant following this guide:
http://support.apple.com/kb/HT4413#3
There is advice in this document for using Migration Assistant from Time Machine or other hard drive.
Maybe you are looking for
-
Why is my iMac so slow and now it is locking up on me
My iMac is soooooooo sow and it just locked up on me. Screen went white and a folder with a question mark was flashing and would not do anything for at least 8 minutes. I had to turn it off from the on/off switch and it took almost 10 minutes to tur
-
How to fail messsages when timeout exception is thrown in BPM?
Hi In my BPM, if the time out exception is thrown in BPM, in SXMB_MONI, all the inbound messages' staus is 'processed sucessfully' ? How can I make the message fail? With a red flag or anything indicating exception? In my design I used deadline bra
-
HT2953 After I burn a CD onto iTunes, I cannot find it in my iTunes library
I want to burn an Album onto iTunes. It is imported. However, it does not come under that artist. What do I do?
-
Passing Paramters to sub-report
I need some help with parameters between reports. I have a master report and a sub-report which is linked to a stored procedure. The stored procedure used in the sub-report has input parameters defined. I have a master report which has a two level
-
Handle invalid xml character while serializing
I have requirement where I need to serialize a document which contains a string like "ﾝￊￒ%ﾝￋ &". While serializing it throws the following exception java.io.IOException: The character ' ' is an invalid XML character Is there a way we can serialize th