Where do the graphics in templates come from?

I'm trying to use an existing template in Pages to create an invitation. It doesn't suit my needs but I'm trying to make it work. I don't want to purchase a template, though I've not even found anything affordable and appropriate in my searches.
Anyway, as a former PC user, I'm accustomed to being able to change a graphic in a pre-designed template. But I can't find a source for the graphics used in Pages anywhere on my iMac! I used to have thousands of 'clip art' images at my disposal. Is there nothing comparable on a Mac?

I guess I should have tried your suggestion before responding. I cannot locating anything remotely similar to an image in the path you described. First of all, when I go to my 'applications' folder I hit a dead end at 'Pages08'. There is no pages 'folder' that contains these shared resources. I've searched 10 different ways, including a spotlight search on the file name in the original response. Can anyone give me another path or a suggestion for a spotlight search that would turn up this 'content' folder of shared resources?
Again, many thanks.
Message was edited by: nicolef207

Similar Messages

Where does the smiley Mac face come from?

Hi folks,
Forgive me if I have the wrong forum but I couldn't find a more appropriate one. A few times recently I have come back to my machine when I've left it with aMule running (an eMule file sharing app) and I've found a smiley Mac face on the bottom of my desktop, just under where the Widget icon appears in my dock.
This face then remains on top of any other window I open. If I reboot the machine it disappears but I am just very curious to hear if anyone can explain how or why it gets there?
With my utmost thanks as always to anyone who takes the trouble to respond to my pesky query (thank heavens it's all I have to worry about for once
Kind Regards
Bernard
Powerbook G4 1.67mhz 15" Mac OS X (10.4.5)

Thanks Jrsy
I guess that's the best place to ask. I am assuming it must have something to do with aMule but I just wanted to check in case anyone else is familiar with this scenario and can explain it. It seems to be malign enough, but I am a little concerned as it would suggest that the fact that I've only granted access to my shared folder for public use, this does not prevent me from the possibility of receving some unwanted stuff elsewhere and I am therefore a little concerned I might be leaving myself open to more malicious actions?
Much appreciate you bothering to get back to me
Kind Regards
Bernard

Billprint program where does the prior reading value come from? which table

hi all,
In billprint pgms the value is stored in structure ERDZ but i'm not able to find how these values are populated and where?
i need to know from which table prior reading and current readings are populated..
is there any program that triggers the billprint forms, if so how to find it?
pls suggest those pgm names.
thanks

Hello,
If you have already attached the form in your contract account and you have done your meter read and Billing, you get these values during running of Invoice program.
Pls look into EABL
also
EABLG MR Reasons in MR Document
EABLARC Internal index f. analyzing archivable meter reading results
Hope this helps
Rgds
Rajendra

HT6240 Where does the DEP Supervision Profile come from?

I've configured a server instance in DEP and successfully enrolled an iPad with OTA Supervision using Casper 9.4. I cannot figure out where it got the Supervision Profile from, and why it correctly states the name of my school district. I did not upload it anywhere that I remember..
thank you,
chris

Thank you. I now see that is coming from the DEP account information.
I was looking at an iPad that enrolled using the prestage settings but must have been supervised still from Configurator.. And the district name was slightly different than the DEP info! Confusion reigned at the end of my day..
chris

Where does the name space prefix come from

When I test my mapping in the Integration Builder both my mapping type and my name space get prefixed with nsX (ie ns1, ns2, etc). How can I tell in advance was the X value will be?
Thanks
Patrick

Hi Patrick,
there is no possibility.
According to the XML namespace declaration the prefixes are just internal aliases with no external meaning.
E.g. <ns1:abc xmlns:ns1="http://www.sap.com" /> and
<iLikeLongPrefixes xmlns:iLikeLongPrefixes ="http://www.sap.com" /> are totally equivalent according to the XML namespace specification.
Therefore, everyone (human or machine) who produces a program can choose the prefixes as he wants. Moreover, he may change the rules for creating these prefixes without being incompatible.
Consequently, the namespace prefixes should not be important for you.

Where do the song title names come from?

i just bought a cd off ebay, one which i believe was manufactured by the person who sold it to me, because i don't think the album was ever released on cd, only in mp3 form.
anyway, i put the cd in, and instead of the correct track listing coming up on itunes, each track listing had been replaced by a title which insults the artist who made the album.
i'm trying to find out if these new, insulting track names were somehow encoded by the album seller who manufactured the cd, or whether the names were encoded into itunes library of track names which were then matched up with the code of the tracks on the cd when i put it into my computer.
anyone know whats up?

For CDs, iTunes does a query to the Gracenote database to get the track info. Since Gracenote is user-updatable, somebody apparently put bogus data in for that particular CD.
To correct the info, right-click the track, Get Info, go to the Info tab and type in the correct info.

Where does the extra outside route come from?

VPN-ASA5505# sh route inside
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route
Gateway of last resort is <IP address> to network 0.0.0.0
S    172.16.55.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S    192.168.174.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S    10.1.43.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S    10.1.32.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S    10.162.225.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S    10.162.35.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S    10.162.8.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S    10.162.9.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S    10.162.10.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S    10.162.12.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S    10.162.2.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S    10.160.0.0 255.255.0.0 [1/0] via 10.161.0.1, inside
C    10.161.0.0 255.255.0.0 is directly connected, inside
S    10.162.7.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S    10.162.30.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S    10.162.19.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S    10.162.20.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S    10.162.21.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S    10.162.110.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S    10.162.99.0 255.255.255.0 [1/0] via 10.161.0.1, inside
S    10.162.95.0 255.255.255.0 [1/0] via 10.161.0.1, inside
VPN-ASA5505#
VPN-ASA5505#
VPN-ASA5505# sh route outside
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route
Gateway of last resort is <IP address> to network 0.0.0.0
S    10.92.1.1 255.255.255.255 [1/0] via <IP address>, outside
C    <IP address> 255.255.255.224 is directly connected, outside
S*   0.0.0.0 0.0.0.0 [1/0] via <IP address>, outside
VPN-ASA5505#
VPN-ASA5505#
VPN-ASA5505# sh run | incl route
route outside 0.0.0.0 0.0.0.0 <IP address> 1
route inside 10.1.32.0 255.255.255.0 10.161.0.1 1
route inside 10.1.43.0 255.255.255.0 10.161.0.1 1
route inside 10.160.0.0 255.255.0.0 10.161.0.1 1
route inside 10.162.2.0 255.255.255.0 10.161.0.1 1
route inside 10.162.7.0 255.255.255.0 10.161.0.1 1
route inside 10.162.8.0 255.255.255.0 10.161.0.1 1
route inside 10.162.9.0 255.255.255.0 10.161.0.1 1
route inside 10.162.10.0 255.255.255.0 10.161.0.1 1
route inside 10.162.12.0 255.255.255.0 10.161.0.1 1
route inside 10.162.19.0 255.255.255.0 10.161.0.1 1
route inside 10.162.20.0 255.255.255.0 10.161.0.1 1
route inside 10.162.21.0 255.255.255.0 10.161.0.1 1
route inside 10.162.30.0 255.255.255.0 10.161.0.1 1
route inside 10.162.35.0 255.255.255.0 10.161.0.1 1
route inside 10.162.95.0 255.255.255.0 10.161.0.1 1
route inside 10.162.99.0 255.255.255.0 10.161.0.1 1
route inside 10.162.110.0 255.255.255.0 10.161.0.1 1
route inside 10.162.225.0 255.255.255.0 10.161.0.1 1
route inside 172.16.55.0 255.255.255.0 10.161.0.1 1
route inside 192.168.174.0 255.255.255.0 10.161.0.1 1
VPN-ASA5505#

Hello,
Show run | include reverse-route
10.92.1.1 belongs to which IP address pool? REmote IPsec users or Anyconnect?
Anyconnect by default has RR with no configuration needed
Rate all of the helpful posts!!!
Regards,
Jcarvaja
Follow me on http://laguiadelnetworking.com

WHERE IS THE DRIVERS FOR IT COME ONE EVERY OTHER COMPANY REALEASED THEM VISTA !!!!!!!!!!!!!!!

<IMG src="http://parcom.pro-networks.org/images/beta2banner.jpg">
WHERE IS THE DRIVERS FOR IT COME ONE EVERY OTHER COMPANY REALEASED THEM
ATI HAVE AC AUDIO 97 HAVE WHERE YOURSSSSSSSSSSSSSSSSSSSSSSSSSS
CAN YOU RELEASE BETA DRIVERS FOR IT YOU MUST HAVE THEM
A WANT TO TRY IT OUT AND SO DO OTHER HUNDRED PEOPLE DO AS WELL FROM HERE
WE WANT THE DRIVERS NOWWWWWWWWWWWWWWWWWWWWWWWW

First of all sorry for this post Cat but I was answering this guy when you locked his thread, I did put quite a bit of effort into it so i will just paste what i put in my reply here lock it if you wish its just for his information--
All brand spanky new hardware has drivers not a lot of older stuff have drivers for vista, so if you have a lot of pre 2004 hardware chances are you will have to upgrade
but as to your question the newest creative (x-fi) cards DO HAVE VISTA drivers
vista 64 bit
http://uk.europe.creative.com/suppor...ype=0&x=20&y=6
vista 32 bit
http://uk.europe.creative.com/suppor...ype=0&x=25&y=3

[svn:fx-trunk] 9171: Adding the change notes that come from the TLF folks

Revision: 9171
Author:   [email protected]
Date:     2009-08-07 08:57:35 -0700 (Fri, 07 Aug 2009)
Log Message:
Adding the change notes that come from the TLF folks
bug: nope
qa: nope
checkintests: no need
Added Paths:
    flex/sdk/trunk/frameworks/projects/textLayout/ReleaseNotes.txt

Where are the tutorials for Raw files from my Nikon?

Where are the tutorials for Raw files from my Nikon?

These tutorials should how to work in camera raw so you can edit NEFs.
How to make non-destructive edits in Camera Raw | Adobe Photoshop CC tutorials

1st job of the day has to come from local computer

I've bought and installed a Laserjet M125a by usb cable in a windows 7 64 bit computer at my office. I've shared the printer with other computers (XP, 7, 32 and 64 bit) through our LAN (cable and wireless).
Everyday, when we turn everything on in the morning, we can't print from any computer in the LAN. The 1st print job of the day has to come from the computer to which the printer is connected via usb cable. After that 1st print, the other computers in the LAN are able to print.
I have already uninstalled, reinstalled, unshared and reshared it on all computers, but nothing fixed the issue.
Any ideas?
(Sorry for the broken english!)

What if she waits another 5 minutes? I suspect some autostart stuff is still loading in the backgrund and slowing the start down.

Recently i noticed that the sound is not comming from my i phone 4s so i needed to restore it as it was earlier. So i decided to do it by restoring it without itunes. Now it is taking too long to restore it. Can anybody Tell me what problem i am facing???

recently i noticed that the sound is not comming from my i phone 4s so i needed to restore it as it was earlier. So i decided to do it by restoring it without itunes. Now it is taking too long to restore it, it is still going on since 3 hours . Can anybody Tell me what problem i am facing???

Which software did you use to restore it, if you didn't go with iTunes?

Where are the "backups"-files listed in the disk utility program come from?

Hi community,
I recently tried to "tidy up" my macbook air and wondered why there is so much HD-space occupied by "backups". My disk utility program shows almost 15 GB of "backups", although I use a USB-HD for time machine backup (which works fine). Where do these files come from? Do I need them? How to delete them?
Thanks for helping!

Welcome to Apple Support Communities
Lion and Mountain Lion create local snapshots on MacBooks, MacBooks Air and MacBooks Pro with Time Machine activated > http://pondini.org/TM/30.html
Time Machine will delete them automatically when the hard drive gets full, so you should leave this as it is. If you want, you can turn them off or delete them, but you don't need this. Also, some tasks may turn them on

Where are the "Display As" templates?

I am using the Blue Grey theme on an application. On some forms there are fields that are not updateable and have the Display As set to "Text Disabled, ..."
In the Blue Tan theme fields that are set to Display As "Text Disabled, ..." are grayed out. I want to gray out the text or the boxes on the fields in the Blue Gray theme just like that.
I looked at the Blue Tan templates for the form Region and can not see what I should change... not even a clue. Doesn't look like it cares about the Display As property.
Where should I look?
Or, heaven help me, does this require changing the CSS file?
TIA,
Sam
Message was edited by:
slavanaway

Christina,
The themes are
2 is Blue and Tan
13 is Blue Gray
Let me see if I understand the problem correctly. When you set an item as either Text Field (Disabled, does not save state) or Text Field (Disabled, saves state) display type, this works in Blue Tan theme, but does not work in Blue Gray theme?
Close but not exactly.
In both themes the "Display As" property of Text Field (Disabled, ...) does disable the field from updates. In theme 2 (Blue and Tan) it also "grays" the text. This is common in many applications for identifying information that can not be updated. In theme 13 (Blue Gray) it does not change the text to gray but leaves it black.
If you go to Shared Components>Templates, you will find templates for "Labels" types (No Label, Optional Label, etc.). When you set the Label type in a Page Item, the template changes the way the Label is displayed and allows HTML coding.
I am looking for templates for the "Display As" type. It isn't on the templates page so I assume it is hidden somewhere in the bowels fo ApEx.
Sam

HTML DB v1.6 Install - Where did the graphics go?

Hi Everyone,
I just installed version 1.6 over 1.5 and noticed the image graphics went missing!
I also noticed my passwords were trashed so I went into the 10g Enterprise Manager and found the OBE user I created for the tutorial and re-typed the password. I then was able to log into the OBE account on HTML DB.
Can you tell me how to get the graphics back, and what other user's are connected to the ADMIN account so I can re-type those passwords?
Thanks.
Emad

Hi Sergio,
Here are the steps.
1. I unzipped the downloaded files.
2. I ran sql/plus and used the command as described in the documentation as the first example. After a short while sql/plus crashed.
3. I changed the properties for the sql/plus shortcut to start in the directory I unzipped the downloaded files.
4. I ran sql/plus again and used the command as described in the documentation as the first example. This worked and there was a success message displayed before sql/plus ended. I am taking for granted they have an exit command in the script to do that.
5. I loaded HTML DB in the browser and it displayed the login page but had no graphics. I tried to use the workspace obe, user name obe, and password obe. It said the login was invalid.
6. I started the Enterprise Manager and found the obe account and re-entered the password.
7. I loaded HTML DB in the browser and it displayed the login page but still had no graphics.
8. I was able to successfully log in as obe, but still no graphics. I was also able to run the application and the original graphics from the old templates were displayed.
9. I logged out as obe and tried the workspace internal, user name admin, and password indonesia (This is the password I set up when originally installing version 1.5 from the companion disk.) It said the login was invalid.
10. I tried to re-enter the passwords to the following accounts in the Enterprise Manager. flows_010600, flows_files, and htmldb_public_user. When I tried to login as admin it still said the login was invalid.
I hope this helps.
Thanks.
Emad.

Where do the graphics in templates come from?

Similar Messages

Maybe you are looking for