Where do the self registered users go

Hi ,
I am new to oracle web center. i have created a sample app no db connections just pure oracle web portal application.
This app has a defalut weblogic/weblogic1 admin user.
Apart from this i ahave also added a self registration page from the readily available security taskflow.
Now i am able to add users at runtime through this self registration page.
But since i am not using any DB am wondering where are these newly registered users and their passwords are being persisted.
can any one shed some light on this cos i cant even see the new users in Jazn xml
--Sanket

ok these registered users are being created in the integrated weblogic ;
but why arent we able to browse thorugh thtem trough jazn xml.
--sanket

Similar Messages

Self-Register User Notifications

I need to send out several email notifications during a self-register user request: Request Initiated, Request Awaiting Approval, Request Approved/Rejected. It seems that OIM 11g/SOA is only setup to handle 2 out of these 4. The SOA engine can notify the approver of the pending approval. OIM can notify the end-user that the account was approved and created based on the Self-Register User Event. Unfortunately, there doesn't seem to be an OIM event or enough data passed to SOA to handle the Request Initiated or Request Rejected scenarios. I am wondering if anyone knows of a way to meet these requirements?
Thanks,
Pete

Here is a solution but will work only if users click on the appropriate self registration links. Also may not be very feasible in cases where self registered user need to be added to a group from large number of groups.
In the workflow step did you configure multiple targets?
You can configure multiple targets under the workflow domain you have chosen.
To self-register a user under a particular group you need to provide a self registration link to users with ObDomainName query string configured appropriately.
Eg:
Self registration Workflow domain is dc=acme, dc=com
Say you want users to be added to groups
cn=users1,dc=acme,dc=com and
cn=users2,dc=acme,dc=com.
For this create 2 Targets in 2nd step of your workflow for the two groups you want user should be added to. Now you have effectively two self registration urls,
http://host:port/identity/oblix/apps/userservcenter/bin/userservcenter.cgi?program=workflowSelfRegistration&ObWorkflowName=...<your value here>...&ObDomainName=cn=users1,dc=acme,dc=com
http://host:port/identity/oblix/apps/userservcenter/bin/userservcenter.cgi?program=workflowSelfRegistration&ObWorkflowName=...<your value here>...&ObDomainName=cn=users2,dc=acme,dc=com
Now if you can manage users to click on appropriate links then you can achieve the goal.

Problem while creating self-registered users

Hi
we are creating a self registered users. When the self registered users enters the data it has to go for the line manager approval.
We have an entity adapter which is triggering after the manager approval. What the adapter will do is it triggers an end date for the user after the approval.
But its showing "DOBJ.error Create user" error after the approval.So we are not able to create the user
KK

I am providing all the mandatory values like Organization and last name.
But still its throwing DOBJ error.
Any Clue...
At this moment i am not able to provide the logs.
Thanks,
KK

Self-Register user workflow add user to Group

Hi,
I have a fairly basic Self-Register user workflow that I am playing with in OAM. I am wondering if I can somehow add a step(s) into my workflow that will add the user to be a member of a Group in OAM during registration?
If so, can this be done without an "external action" or custom code?
If anyone knows anything that can help I'd appreciate it.
Thanks,
Jackie

Here is a solution but will work only if users click on the appropriate self registration links. Also may not be very feasible in cases where self registered user need to be added to a group from large number of groups.
In the workflow step did you configure multiple targets?
You can configure multiple targets under the workflow domain you have chosen.
To self-register a user under a particular group you need to provide a self registration link to users with ObDomainName query string configured appropriately.
Eg:
Self registration Workflow domain is dc=acme, dc=com
Say you want users to be added to groups
cn=users1,dc=acme,dc=com and
cn=users2,dc=acme,dc=com.
For this create 2 Targets in 2nd step of your workflow for the two groups you want user should be added to. Now you have effectively two self registration urls,
http://host:port/identity/oblix/apps/userservcenter/bin/userservcenter.cgi?program=workflowSelfRegistration&ObWorkflowName=...<your value here>...&ObDomainName=cn=users1,dc=acme,dc=com
http://host:port/identity/oblix/apps/userservcenter/bin/userservcenter.cgi?program=workflowSelfRegistration&ObWorkflowName=...<your value here>...&ObDomainName=cn=users2,dc=acme,dc=com
Now if you can manage users to click on appropriate links then you can achieve the goal.

Allow creation of Self Registered Users

Under Portal Settings in the Admin section is a checkbox to "Allow creation of Self Registered Users". And a note that says "Changes in these settings will take effect immediately."
I'd like to utilize this feature and have therefore checked the box, and made sure my custom login adaptive layout includes this tag: <pt:ptui.createaccount />
After giving the setting a good hour to work its magic, the view source shows that the tag creates just this: <span id="pt-login-create-account"></span>
I was assuming that there'd be some more code than that - at least a link!
Any idea what might be the issue? It seems like such a straight forward type of setting.
Thanks

The issue has been narrowed down slightly by including the problematic extranet login page as a portlet within our intranet - which then succeeds in displaying the page.
One item of note was that we have the admin area installed on both of our load balanced intranet servers - and each had to be set to allow creation of users via the admin interface before it could be seen by all. This is slightly disconcerting as we assumed they relied on the same data repository (db).
Fortunately, this might be a clue as to why it isn't working still on our extranet server.
The catch there is that we can't access the admin interface via our extranet - so I'm now in the process of trying to track down exactly where this value is saved to from the project settings page.
Any suggestions?
Thanks!
Solution--
I set our extranet to be able to display the admin section, restarted the server, logged in, checked that the admin setting was correct, reset the config file, restarted the portal and then the link magically appeared.
Lesson learned - don't trust the documentation when it says that a restart isn't required...

Self-Register User Template Error : MinLimitException: size minimum limit

I am using OIM 11.1.1.5. When I click "Self-Register User" request template link, I get the following errors. Note that this link was working on other OIM environment where no custom UDFs are present.
Thanks!
Kabi
The Error in IM pop up screen says "size < minimum limit ; ADF_FACES-60097: for more information, please see the server's error log or an entry beginning with ADF_FACES-60096:Server Exception during PPR,#1"
The oim_server1-diagnostic.log says
ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase INVOKE_APPLICATION 5[[
oracle.iam.platform.utils.MinLimitException: size < minimum limit
     at oracle.iam.platform.canonic.model.Values.setMinLimit(Values.java:187)
     at oracle.iam.requesttemplate.agentry.operations.OpenActor.renderAttributeRestrictionsTab(OpenActor.java:822)
     at oracle.iam.requesttemplate.agentry.operations.OpenActor.prepare(OpenActor.java:195)
---------------------------------------

Did u import any object for self registration? if so import it again...i have seen this error before in my env.
If the self registration fails, then it is a Oracle Bug and they are working on getting a patch for it...
~VSN

Populate fields only for self registered users

Hi All,
Scenario : I have an approval task for self registered user. When the user enters the details it goes for approval. The userAccount gets created only when the approver enters values for mandatory attributes like organization.I also have few other mandatory attributes that needs to be filled out.
The requirement is that these mandatory fields have to be populated automatically. I cannot use an entity adapter because if i do so the manadatory fields will be populated when users are being created by xelsysadm.Please help.
Thanks.

You can use Ajax or Java Script for populating other fields.

Self-registered users : Auto activate and add ESS role ?

Hi all ,
we are allowing users to self-register for our ESS portal. We would like to auto-activate the users and give them the ESS role without any Admin action .
Is this possible ?
Regards
Daniel

Hello Daniel,
please assign your ESS Role to the group "everyone".
Then the self registered(but also every other user on the portal) will have this role by default.
Assign Default Role to User
Regards
Frank

Self Register User Auto Approval Scenario in OIM 11g

Hello,
I was working on scenario of suppressing approval while Self-Registrating user, following steps were performed
1) Export SelfCreateUserDataSet.xml using weblogicExportMetadata.sh
2) Modified SelfCreateUserDataSet.xml [removed approver-only tag from organization attribuite]
3) Imported SelfCreateUserDataSet.xml using weblogicImportMetadata.sh
4) Restarted OIM & SOA server.
5) Created approval policies i.e. Request Level & Operational Level bote with Auto Approve condition.
6) Made a clone of Self-Register User template & added organization restriction & added Self Operator role.
7) When tested above scenario then xelsysadm had to approve for request & operational level,organization was already selected ,so shouldnt it get approved
automatically as i have mentioned Auto-Approve in approval policy ?
Tested using following link:
http://hostname:port/oim/faces/pages/USelf.jspx?E_TYPE=USELF&OP_TYPE=SELF_REGISTRATION&T_ID=Clone of Self-Register User
Thanks,
Rahul

Hello,
No i cannot see organization field as i have restricted organization to 'xyz' .
My Issue is resolved & problem was that i had changed password of OIM,weblogic also updated boot.properties file in oim & soa,but for some reason my SOA was not working although SOA server was running,so changed password of SOAADMIN from EM,restarted all 3 servers & now my scenario of Self Register Auto Approve works.
Now only thing i am curious is that when i self register user,it shows Request failed,but when checked in OIM user is created .
Thank-You
Rahul

Where oh where is the self registration API?

Can anyone point me to where the self registration api is supposed to be located?
Thanks

Daniel,
Have you looked at the PL/SQL APIs? There may be something in there you can use to create/register a user.
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/PDK/plsql/doc/astart.htm
Take a look at the wwsec_api package.
Hope this helps,
Sue

How to notify a self registered user that his/her request has been denied

Hello,
Is there a way to send an email to the requestor (this email address is what the user puts in the self registration form under requestor email) to notify that the request has been denied? (OIM 9.1)
In The User Registration Process Definition, Task Awaiting Approval Data, I have the Assignment Tab set as follows:
Rule: Default
Target Type: Group
Adapter AssignApproverGroup (this adapter dynamically looks for the members in a group based on the requestor organization, assigns the task to these individuals, and sends an email notifying that self registration approval is pending to all members of that approvergroup)
Priority: 1
Notification Tab
Assignee is checked
Status: R
Email: Self registration request Denial
When the Assignee logs in and denies the request, an email is sent to the Assignee about the denial.
Questions:
1. If the ApproverGroup has more than 1 member, how can we notify all the members of the Approver group that the request has been denied?
2. How can we notify the requestor that his/her request has been denied using his/her provided email from the self registration form?
Thanks
Edited by: Khanh on Dec 4, 2008 3:36 PM

You need to think about how the whole system is going to work - you need to know everything that the button will require, and then think about how to provide this information to the button.
So, by the sounds of you need say a single button to press when you want to add a new button to the calculator. Associated with this have text fields that take the function for the calculator. I would specify that the function uses variables e.g. x and y as in function = x * y. Then your program could parse the input string describing the function, by recognising "*" to mean * in the Java code syntax and "/" to mean /. Then treat everything else as variables. Since you can filter out the other variables i.e. not the operators, you can then say associate an array to contain the values of these. Then when the user uses the button and specifies the input parameters and presses the button, you can update this array, and perform the calculation based upon these values.
Hope this helps.
My advice really is just to think about everything that a button that creates new function buttons is going to need.
PS. Remember to repaint the GUI once update its Container. Swing does this automatically, but I always specify it explicitly anyway to be safe. You can use either repaint(), validate(), or revalidate().
Goodluck mate!

Where is the password for user SDM stored in sap system?

Hi SAP Gurus,
We recently changed the password of the user j2ee_admin in our dual stack system where our UME is ABAP.
Now, we have made changes in the su01 and configtool but after the system restart, the user id j2ee_admin is getting intermittently locked.
On starting the the JSPM/SDM, we found it still uses the old password so wanted to know that from where does the user SDM picks up the password and starts.
Searched few blogs and found that it reads from secstore of configtool. Could you please help.
Regards,
Himanshu

Hi Himanshu,
SDM uses encrypted administrator credentials stored which are stored secure store to use deploy service.
If you have changed the password, updated in secure store and is correct, the you should be able to logon to VA.
If not, then
Goto /usr/sap/SID/DVEMBGSXX/SDM/program/config and open sdmrepository.sdc file to see the values of SecStore.properties and SecStore.Key are pointing to correct path. You can verify this from configtool or config.properties in configtool folder.
If you are not able to save this password in configtool, then refer 1228507 - Config Tool does not properly save password in Secure Store
Regards,
Divyanshu

Where is the iPhone 5 user guide, where is the iPhone 5 user guide

I am trying to search for the manual that comes with the phone thru a tab. I can't seem to find it does any one knows how to reinstall.

My brother just updated to an Apple iPhone 5 - 4G
He purchased it from his cell phone carrier AT&T.
Since he is older he is having MUCH trouble using it.
He does not have a computer or iPad thus he cannot obtain an online user guide.
Can anyone direct me to where I may obtain a user guide for him that is on DVD or possibly CD?
Thank you for your consideration and assistance,
silverdude

Where's the documentation or user guide?

I am now working through the twelve lessons in Adobe Premiere Elements 11 Classroom in a Book. Several times the book says to refer to Premiere Elements documentation or user guide for a full explanation of a subject. Is there such a thing and where do I find it? There is plenty of clear information in the Help and Tutorials but not the documentation that comes, for example, with a camcorder.

Tommy,
You will find a lot of that here: http://helpx.adobe.com/pdf/premiere-elements_reference.pdf
Also, the Help File, F1, will have good material too, and is active on-line, so there are some comments via Community Help there, as well.
If you are new to PrE, here is a partial list of useful resources: http://forums.adobe.com/message/3953827#3953827
I particularly recommend Steve Grisetti's Basic Training Series on Muvipix.com.
Good luck,
Hunt

Where is the X1 DVR user manual?

Thanks. I posted another thread on peoples' experience with voice Remote before I saw these recent answers. Hope that's okay. Rick, that's exactly my concern, that I'd go through the trouble to obtain one and find it doesn't do what I need most: Easy, efficient movement amongst AND WITHIN these functions: Menu, Guide, Recorded, Evaluating and/or deleting episodes of a series, Play, Rewind, etc. I never search for anything, nor do I want to see 'For You' selections, or 'Popular' selections. Although I live alone, neighbors pass nearby and it's odd to think of them hearing me issuing commands. Get your point.

Well...
You found your way to this forum so maybe you could have looked at the "sticky threads" at the top of this forum.
http://forums.xfinity.com/t5/X1/X1-General/td-p/1854693
The information linked here is roughly the best info Comcast has decided to make available.
kkm9 wrote:
Where can I find a text version of a DETAILED user manual for the X1 - DVR interface? I do not want to search for a 'TIPs' screen within the interface. It's too slow to deal with. Am I the only one for whom this interface is infuriatingly slow? It usually takes multiple clicks to Pause, to select and get Menu, to Exit, to do ANYTHING. Major aggravation. Many things are unclear, including how to delete unique episodes of a recorded show vs deleting the entire contents of a 'Saved' show. How to pause an episode, then delete it without having to Exit, then open Menu. How to review recorded episodes as a list, in the order they were recorded. How to quickly delete an episode once you decide you want to. So many things are frustrating to accomplish. This interface is awful.

Where do the self registered users go

Similar Messages

Maybe you are looking for