Where do the things go when I put them in archive

I keep losing pictures ...I put them on archive and they just disappear ...where do they go and how can I get them back?

Migration Assistant doesn't copy files, it copies an account (and the files inside it). You'll need to log out of your current Mac account and when you do you should see that you have (at least) two accounts now: Your Mac account created when you turned on your Mac for the first time and the account(s) imported from your PC. That account should have the same password it did on the PC .

Similar Messages

How can I format an SD card on my mac? I have tried the erase thing but when I put the card into my 35mm camera it says that the card has to be formatted.

I just purchased two new SanDisk 8gb SD cards for my trail cameras. When I put the cards into the trail cameras, the cameras will take pictures but it won't store them on the cards. When I put the cards into my 35mm camera the camera tells me that the cards need to be formatted. I have went through the steps in the disk utilities and erased the cards, which I assume is the same as formatting them?? I have tried this for hours and have had no luck getting these things to work at all. It was awful disgusting when I checked my two trail cameras the first time and found out that they had taken close to 75 pictures but the cards were empty. When I bought my 35mm camera several years ago, I bought a couple of Kodak SD cards and used them right out of the package and never had to do any of this formatting thing. I don't understand what is going on and could sure use some help with this. Thanks for any information anyone can give me with this problem. I would love to have seen what animals set my cameras off 75 times in the last few days. Thanks again.
Respectully
Jim

AFAIK cameras offer their own built-in format utility for inserted SD cards. You should use that. Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly. Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan. I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole.

Where do the videos go when i sync my phone? The ones i take with my phone

Where do the videos go when i sync my phone? The ones i take with my phone?
im looking for them on my PC not the phone btw
thanks for any help
Message was edited by: jakobstone

They don't sync with iTunes. You access them from another application on your computer. For me, I use Photoshop Elements to get pictures and videos off my iPhone when it's synced. Mac users can use iPhoto to do the same thing.
Also, on the PC you can drill down into the iPhone folder structure from your Explorer window and copy/paste the videos onto your PC.
Message was edited by: dmiannay

In pages(not the New version) footer is over to the left, so when i put the page numbers in they don't sit right. How do i move the footer

In pages(not the New version) footer is over to the left, so when i put the page numbers in they don't sit right. How do i move the footer

The footer is not only to the left. To get the page number to the right you can use Format > Align right. That will make all page numbers move to the right. Is that what you want?

I want to upgrade my Hard Drive to 1TB and more. What is the maximun Hard Drive I can install for a MacBook Pro 2009 Yesterday, I tried a SEAGATE SSHD but my screen was always a showing a QUESTION MARK (?). It's not the cable because when I put back

I want to upgrade my Hard Drive to 1TB and more.
What is the maximun Hard Drive I can install for a MacBook Pro 2009
Yesterday, I tried a SEAGATE SSHD but my screen was always a showing a QUESTION MARK (?). It's not the cable because when I put back the old original version, everything works...Any sugestion of brabnding or procédure to upgrade my hard drive?

The largest 2.5" dia SATA drives available are 2 TB in capacity.
Have you tried the Seagate SSHD connected externally to the MBP via USB? The drive itself may be faulty.
Ciao.
Here is a good place to start looking for a replacement drive:
http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/

I have Adobe Acrobat 7.0 Professional that I want to migrate to my newer laptop running Windows 7. I downloaded the file 22020134.exe to reinstall it on my new computer and I go through the hops and when I put in the Serial Number it tells me its invalid.

I have Adobe Acrobat 7.0 Professional that I want to migrate to my newer laptop running Windows 7. I downloaded the file 22020134.exe to reinstall it on my new computer and I go through the hops and when I put in the Serial Number it tells me its invalid.

22020134.exe is the file Adobe say you must download and run to instal Acrobat 7.0 Pro. I went through the process, the one described in your link, I downloaded the file, ran it, it runs well, except it tells me my serial number is invalid. Now what? Does this mean I now have to discard my Adobe Acrobat 7.0 Professional and start again with a $500 purchase? All I want to do is transfer what I have to another computer.

Why are the apps on my IPad scattered across the whole thing and when I open them they turn to little rectangles in the corner of the screen and I can't even use them or tap on anything. Also when I turn my iPad it doesn't flip the screen over

Why are the apps on my IPad scattered across the whole thing and when I open them they turn to little rectangles in the corner of the screen and I can't even use them or tap on anything. Also when I turn my iPad it doesn't flip the screen over.

Hi The next thing to do is to Restore back to Factory Settings this will get rid of any bugs . After Restore use same Apple ID /Password then you should get all your Apps & data back If you still have this problem make an Appointment at Apple Store . Cheers Brian

I have Java set up as a plug in but cann't get into yahoo games. Where is the firefox button when I have the browser open? Only button I see gives me close, resize,

I have java installed and properly working as a plug in. Why can I not get into Yahoo games and play Card Games? Where is the firefox button when I have the browser open? Only button that looks like anything for firefox allows me to restore, move, size, minimize, maximize, and close. That button is top left hand corner location.

I recently purchased a second hand new macbook air, although it was second hand to me the previous owner had never actually turned it on.
Something doesn't make sense here, though I'm not saying the previous owner is lying....
Time to send your serial # to iTS and let them see what's happening here.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

I have created a folder and album where I've renamed the images, yet when I export them, the default to their original numbering. How can I block that so I can keep the newly renamed images as I've renamed them?

I have created a folder and album where I've renamed the images, yet when I export them, the default to their original numbering. How can I block that so I can keep the newly renamed images as I've renamed them?

As TD pointed out:
OT

HT5096 where is the administrator window when I drag the folder "Backups.backupdb" from the old hard drive on the new one?

where is the administrator window when I drag the folder "Backups.backupdb" from the old hard drive on the new one? At the moment when I try to do it, the window that appear doesn't allow me to continue. it only says "the volume has the wrong case sensitivity". thanks

Although the documentation says you can copy Time Machine backups in the Finder, it's very slow and sometimes doesn't work at all.
Launch Disk Utility, open the built-in help, and search for the term "Duplicate." Follow the instructions. All existing data on the destination volume will be erased. That shouldn't be a problem, because you don't want to mix backup and non-backup data on the same drive anyway. Turn Time Machine OFF in its preference pane while copying the volume.

I forgot the code for my iPhone to access the Home screen I do , please help me try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears

I forgot the code for my iPhone to access the Home screen I do , please help me
try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appears

Hello polo-angulo,
I apologize, I'm a bit unclear on the nature and scope of the issue you are describing. If you are saying that you are getting an error code (3004) when you try to restore your iPhone (because you could not remember your passcode), you may find the information and troubleshooting steps outlined in the following articles helpful:
Resolve iOS update and restore errors in iTunes - Apple Support
Get help with iOS update and restore errors - Apple Support
Sincerely,
- Brenden

I created mega menu in adobe muse ( master page ) but the thing is when i preview the menu in other pages the stuff i alreahy had created will overlap the menu. Is there anything i can do fix that problem up. I'd like to have the menu overlap the stuff i

I created mega menu in adobe muse ( master page ) but the thing is when I preview that menu in other pages contents I already had created will overlap the menu. Is there any options that would fix that problem up. I'd like to have the menu overlap the contents. That does not happen on master page ( master page looks good ) Thank you very much.

Place the menu on its own layer above the rest of the page content.

How do i fix my phone it will show the apple sign when i put it on the charger it will show the apple sign and it wont charge and it will not come on how do i fix my phone i have the iphone 4s

how do i fix my phone it wont charge it will show the apple sign when i put it on the charger and it will show the apple sign and then it will shut right back off and it wont come on and i have the iphone 4s how do i fix my phone

Check the USB port and the USB cable for any kind of lint, debris or bent pins.
Try another, working USB cable.
If still no luck, get it checked by visiting an Authorized Apple Service Provider or contact Apple Support to get it serviced:
iPhone - Contact Support - Apple Support

When I get ready to burn my dvds they tend to be blurred. Even with pictures they do the same thing. When I preview them they blur while playing. But when I stop the video it becomes crystal clear.

When I get ready to burn my dvds they tend to be blurred. Even with pictures they do the same thing. When I preview them they blur while playing. But when I stop the video it becomes crystal clear.

Lamontsplace
Thanks for asking for clarification. Appreciated. I did not see you post 8 until after I posted my post 9.
Important that we define the issue as being related to just preview or to preview and export.
Project Preset....
When you start a new project, a project preset (project settings) need to be set by you or the project. The program
is designed to do that based on the properties of the first video file that you drag to the Timeline. Sometimes the program
does it right, sometimes not. If not, then you set the project preset manually assuring that the description of the project preset
matches your video properties for at least frame size, frame rate, etc. A major function of the project preset is to direct
the program to give you the correct space in the Edit area monitor for editing. If you select a project preset which includes
1920 x 1080 in its description, then the space in the Edit area monitor will reflect that 16:9 format.
If you or the program have set the correct project preset, then, when you drag your video to the Timeline for the first time, there
will be no colored line over its content. That means that you are getting the best possible preview in the monitor. Once you
edit that video, you will get an orange line over it. That is the program telling you that you no longer have the best possible preview
and to get it you Timeline render using the Render button above the Timeline. When that Timeline rendering is complete, the orange
line turns to green. That is the program telling you that you have the best possible preview which will be in effect until you edit the
file again. Then orange to green again.
Right now I would prefer to stay with trying to get your photos to an acceptable preview stage. No matter what the project preset,
these will need Timeline rendering after they are dragged to the Timeline. Several have reported that the use of the DSLR project preset results in sharper images pre and post export. I want to see if any of that can enhance your situation.
Please review and consider and then let me know if I am going in the right direction for the explanations. I will adjust
my instructions/suggestions accordingly.
More later.
Thanks again for the follow up.
ATR

How to rotate pictures from iphone when you put them on the computer

how to rotate pictures from iphone when you put them on the computer

The program you use on your computer to view the picture might have a feature to allow you to rotate the photo

Where do the things go when I put them in archive

Similar Messages

Maybe you are looking for