Where do we define partner types like KU,LI,VS,LS...?

where do we define partner types like KU,LI,VS,LS...?

Hi,
SPRO>S&D>BASIC FUNCTION>PARTNER DETERMINATION..
Their u can select area where u want to define them.
Only clicking after one of the options u will se partner function on the left side of ur screen, double click on it.
There u will see all the partner functions...here u can create new partner function or use the available one..
Hope it helps.
Thanks
Dushyant

Similar Messages

Where should we define Stock type in IMG Settings ....

Hello guru's,
In Mi03 transaction, if you go and edit the transaction displays material, material description followed by Stock Type, where should I define stock type in IMG settings so that the list will display in the scroll bar. Will anyone guide me.
Full points for the answer.
Regards,
PV

This is system defined stock type.........there is no config for this

Where can I define Rate Types

Hello,
I tried to define Rate Types by the following path of IMG, but I couldn't do it.
Can anyone know where and how you can configure Rate Types of utilities?
[Path I tried]
IMG -> SAP Utilities -> Contract Billing -> Billing Master Data -> Rate Structure -> Define Rate Types
For your reference, I attached two images which I got when I executed the above path.
[Description of the attached file]
01_Entering rate type.JPG
I got this image when I pushed "New Entry" button and tried to enter rate type by typing.
It says I need to enter rate type by selecting a certain value, not by typing any alphabets.
02_Selecting rate type.JPG
I got this image when I tried to select any values. (You can also do this by pushing F4 key)
It seems like I need to define rate types elsewhere before I execute this configuration.
Thank you in advance for your help.

At the time new Rate type creation you should always tell this rate type is for register or Device are for Installation Facts.Check required checkbox then you will be able to save Rate type.
Thanks,
LN

Define New Partner Types

Hi,
Where and how do we define new Partner Types (e.g., KU - Customer, WK - Plant etc.) ?
Regards,
Piyush

Hi Piyush,
You can go to the following path.
SPROSDBFPartner determinationSet up partner determination---Set up Partner determination for Customer master (or for any other transaction too)
Here you can see that partner types are also defined along with the partner functions we use. We can copy the partner type and create a new one.
Whenever we create a new Partner Function, the function has to be assigned to one of the partner types so that the partner function can behave as the partner type. For example if a partner function is assigned to partner type KU, then a partner of that PF can behave like a partner type.
Reward if it helps.

Where can I create Partner Role type (TSW003-supplier) for TSW

HI IS OIL Expertise,
Where can I create Partner Role type (TSW003-supplier) for TSW?
Because while creating partner role @T Code: O4TQ @ Role Assignment” TSW003-supplier” not available on drop-down list.
please do needful on this.
Thanks
Chandra

Hello Chandrasekhar
As you know that Partner Role is -
"The master data record of a partner role is used to define a business partner. The partner role includes information about the activities that the business partner can carry out and where the business partner carries out these activities. Stock-holding objects, such as plants and storage locations can also be defined as partner roles."
According to your screen shot and question, you want to define the TSW003 which only shown when you enter Vendor code in initial screen i.e. O4TQ.
Thanks
Yogesh

How and where to define movement type for O4G1 or O4H1

Hello.
When Loading confirm(O4G1) and Delivery confirm(O4H1), some movement types create.
For example,
After Loading confirm 311->647->101.
After Delivery confirm 309.
How and where to define movement type for O4G1 or O4H1.
Please, answer to me.
Good day~!

Hi Bulk shipment type and   intransit posting group will determine the Movement type.
For Define bulk shipment type ;
SPRO => Industry Solution Oil & Gas (Downstream)=>TD   (Transportation and Distribution) =>TD Bulk Shipment => Define bulk shipment type
For Define intransit posting group :
SPRO => Industry Solution Oil & Gas (Downstream)=>TD   (Transportation and Distribution) =>TD Bulk Shipment =>Intransit Stock =>Define intransit posting group.

Plz can someone tell me where can I define the material type?

Hi All,
I want to create a new group of material, there is a material type should be specified. I want to use my own. plz can someone tell me where can i define it?
thanks and regards,
samson

Hi Samson,
U can create a new material type using the tcode OMS2 and then copy the material type which u need to modify and then define the name of the new material type and make the required changes which u want for that material type and save it.
Hope it wud have answered ur question
reward if useful
Shawn

What is purpose of CO Partner Update fied in OPJH - Define Order types

Dear All
Could U explain the Purpose of CO Partner Update fied in OPJH - Define Order types .In help it is explained as below :
In allocations within CO, a totals record is usually produced for each sender-receiver combination. In orders, you can influence this process in the following ways:
·"Not active"
In allocations between an order and another object, no totals record is produced for the relationship with the order.
·"Partly active"
In allocations between orders, totals records are produced for each combination.
In allocations which are not directly between two orders, such as activity allocations between cost centers and orders), no totals record for the relationships with the order is produced in the other object.
·"Active"
In allocations between an order and another object, a totals record is always produced for the combination including the order.
Unable to under stand this explanation....pl explain me clearly,,,
Thanks & Regards
prasad

Hi,
Co Partner Update- This field determines how an order will post during CO allocations. This setting will influence the number of data records maintained in order accounting. there are three choices available-
Active- A total record will be maintained for all parties involved.
Semi-Active- During order to order allocation such as 'settlements', a total record for both the objects will be maintained but for allocation between an order & a cost center, such as reposting, a total record will not be maintained for the order on the cost center.
Not Active- No total record is maintained on the receiving object.
hope it make you clear.

In XML Gateway Responsibility How to add User defined Trading Partner type.

Hi,
We have a requirements to add user defind Trading Partner Type apart from the default trading partner type.
How to do this? If any one know , kinldy let me explain it
Thanks

I looked it up in the mean time ...
The docs state that you only can use simple data type or java.util.list or AttributeList (which is a wrapper for any viewRow). So I guess you have to somehow flatten your complex data type or create a custom VO which holds it.
http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcextservices.htm#CJAEHFJD
Scroll down to 11.2.3
Timo

User-Defined Table Types - Where is it in SQL Server 2008?

I am having 2 issues:
1. I don't see a folder for 'User-Defined Table Types' under programmability-->Types
2. When I execute the following code to create a Type; I get an error 'Incorrect syntax near the keyword 'AS'.'
USE Locations;
GO
/* Create a user-defined table type */
CREATE TYPE LocationTableType AS TABLE
( LocationName VARCHAR(50)
, CostRate INT );
GO

Hi Shayann,
The user-defined table type is a new
feature from SQL Server 2008. If you want to use it you have to upgrade your database to SQL Server 2008 or above.
In you scenario(SQL Server 2005),as a workaround, you can use the local temporary table instead.
--in SQL Server 2005
CREATE TABLE tblType(id INT,name VARCHAR(99))
GO
CREATE PROC proc1
AS
BEGIN
SELECT * FROM #temp;
END
GO
SELECT * INTO #temp FROM tblType; -- the #temp name is fixed
INSERT INTO #temp VALUES(1,'Eric');
EXEC proc1
--In SQL Server 2008 or above
CREATE TYPE LocationTableType AS TABLE
( id INT,
name VARCHAR(99) );
GO
CREATE PROC proc1 @t LocationTableType READONLY
AS
BEGIN
SELECT * FROM @t
END
GO
DECLARE @t LocationTableType;
INSERT INTO @t VALUES(1,'Eric');
EXEC proc1 @t
I still suggest you upgrade to higher SQL Server.
If you have any question, feel free to let me know.
Best regards,
Eric

Partner type -only logical system?

Hi!
I have a scenario where I want to send an idoc to SAP using XI idoc adapter. It works fine using a partner type "logical system" (LS). But now i would like a scenario where the partner i a type "customer" (KU). I have defined a new business system in the SLD as a sender (just in case) and the partner of course exist in SAP under customers). I have also mapped the korrekt values to the IDOC (sndprt, sndpor and so on) -but these are of course overwritten using the values from the SLD (which only operates using logical system). Is there a way to integrate using a partner of type customer? I have made a similar scenario work using the Business Connector -what is the missing link to make it work in XI?
best regards

Hi Martin,
> I have a scenario where I want to send an idoc to SAP
> using XI idoc adapter. It works fine using a partner
> type "logical system" (LS). But now i would like a
> scenario where the partner i a type "customer" (KU).
This is not foreseen in XI 2.0. You need to wait for XI 3.0, there it will be possible.
Regards
Stefan

Posting IDOCs with partner type SP ?

We have to post IDOCs to SAP where the partner type is SP . How do we configure XI to achieve this ?
We are disabling the control record and so not looking at the option of hardcoding the EDI_DC record.
I understand we need to specify Alternate identifiers in IDOC channel and also choose header mapping in receiver agreement, however am not very clear on the steps.
Can neone help me with the steps.
Thanks
Saravana

I need values something like below to be in the control record of the IDOC and could not find a way of doing it
<SNDPOR>PORT1</SNDPOR>
<SNDPRT>SP</SNDPRT>
<SNDPRN>ServiceProvider1</SNDPRN>
<RCVPOR>SAPS32</RCVPOR>
<RCVPRT>SP</RCVPRT>
<RCVPRN>ServiceProvider2</RCVPRN>
By default , the SNDPRT & RCVPRT carry the constant "LS"(i still do not get y this is enforced by the IDOC adapter). Our sender system is a FTP server & receiever is SAP system. We have the Business Systems defined as service without party.
I tried hardcoding the values in EDI_DC40 in message mapping, but the IDOC adapter removes(!!) it and creates its own header(inspite of the chk box being unchecked or checked!!?? in the communication channel configuration)
Christoph , i could not make out much out of the thread u ve pointed to.
Thanks
Saravana

Using user-defined data types in Forms 6i

When I use the following code in Oracle Forms 6i
PROCEDURE test IS
prcl prcl_ty;
BEGIN
prcl := prcl.setParcel('xxx-xx-xxxx');
END;
I get 'Error 801'. However the above does work in SQL editor. The online help says PL/SQL8 client-side program units cannot support Oracle 8 object-related functionality and I suspect this is the reason I get the error from Forms. Is there a work-around for this.
The TYPE is defined as:
CREATE OR REPLACE
TYPE PRCL_TY AS OBJECT
(parcel VARCHAR2(11),
MEMBER FUNCTION getBook RETURN VARCHAR2,
MEMBER FUNCTION getMap RETURN VARCHAR2,
MEMBER FUNCTION getItem RETURN VARCHAR2,
MEMBER FUNCTION getItem_NS RETURN VARCHAR2,
MEMBER FUNCTION getSplit      RETURN VARCHAR2,
MEMBER FUNCTION find RETURN VARCHAR2,
MEMBER FUNCTION find (yr in VARCHAR2) RETURN VARCHAR2,
MEMBER FUNCTION isValid RETURN BOOLEAN,
MEMBER FUNCTION toString                     RETURN VARCHAR2,
MEMBER FUNCTION toString (par IN VARCHAR2) RETURN VARCHAR2,
STATIC FUNCTION setParcel (istr IN VARCHAR2 DEFAULT '000-00-000A') RETURN prcl_ty) -- to be used as a constructor
NOT FINAL
CREATE OR REPLACE
TYPE BODY PRCL_TY AS
MEMBER FUNCTION getBook RETURN VARCHAR2 IS
BEGIN
return substr(self.parcel,1,3);
END;
MEMBER FUNCTION getMap RETURN VARCHAR2 IS
BEGIN
return substr(self.parcel,4,2);
END;
MEMBER FUNCTION getItem RETURN VARCHAR2 IS
BEGIN
return substr(self.parcel,6);
END;
MEMBER FUNCTION getItem_NS RETURN VARCHAR2 IS
BEGIN
return substr(self.parcel,6,3);
END;
MEMBER FUNCTION getSplit RETURN VARCHAR2 IS
BEGIN
return substr(self.parcel,9,1);
END;
MEMBER FUNCTION find RETURN VARCHAR2 IS
found varchar2(1);
BEGIN
begin
select 'x'
     into found
     from casrp
     where cp_book_num = self.getBook
     and cp_map_num = self.getMap
     and cp_item_num = self.getItem
          and rownum = 1;
     return 'CASRP';
     exception
     when NO_DATA_FOUND then
     begin
select 'x'
     into found
     from pro_prop
     where pp_book_num = self.getBook
     and pp_map_num = self.getMap
     and pp_item_num = self.getItem
          and rownum = 1
          and NOT EXISTS (select 'x'
                              from cncl_prcl
                              where cr_book_num = self.getBook
                              and cr_book_num = self.getMap
                                   and cr_book_num = self.getItem
                                   and rownum = 1);
     return 'PRO_PROP';
     exception
     when NO_DATA_FOUND then
          return '';
     end;
end;
END;
MEMBER FUNCTION find (yr IN VARCHAR2) RETURN VARCHAR2 IS
found varchar2(1);
BEGIN
begin
select 'x'
     into found
     from casrp
     where cp_book_num = self.getBook
     and cp_map_num = self.getMap
     and cp_item_num = self.getItem
          and cp_tax_yr = yr
          and rownum = 1;
     return 'CASRP';
     exception
     when NO_DATA_FOUND then
     begin
select 'x'
     into found
     from pro_prop
     where pp_book_num = self.getBook
     and pp_map_num = self.getMap
     and pp_item_num = self.getItem
          and pp_tax_yr = yr
          and rownum = 1
          and NOT EXISTS (select 'x'
                              from cncl_prcl
                              where cr_book_num = self.getBook
                              and cr_book_num = self.getMap
                                   and cr_book_num = self.getItem
                                   and cr_tax_yr = yr
                                   and rownum = 1);
     return 'PRO_PROP';
     exception
     when NO_DATA_FOUND then
          return '';
     end;
end;
END;
MEMBER FUNCTION isValid RETURN BOOLEAN IS
i number;
BEGIN
for i in 1..8 loop
     if substr(parcel,i,1) not between '0' and '9' then
     return FALSE;
     end if;
     end loop;
     if nvl(substr(parcel,9,1),'#') not between 'A' and 'Z' and
     nvl(substr(parcel,9,1),'#') != '#' then
     return FALSE;
     end if;
     return TRUE;
END;
MEMBER FUNCTION toString RETURN VARCHAR2 IS
BEGIN
return self.toString('-');
END;
MEMBER FUNCTION toString (par IN VARCHAR2) RETURN VARCHAR2 IS
BEGIN
return self.getBook||par|| self.getMap||par|| self.getItem;
END;
STATIC FUNCTION setParcel (istr IN VARCHAR2 DEFAULT '000-00-000A') RETURN prcl_ty IS
len number;
pos number;
     lastch varchar2(1);
temp varchar2(30);
invalid_format exception;
     pragma exception_init(invalid_format,-9001);
BEGIN
temp := upper(istr);
-- Find 1st occurance of '-'. If not in correct postion, pad book num with zeros.
     pos := instr(temp,'-',1,1);
if pos > 0 then
     if pos != 4 then
temp := lpad(substr(temp,1,pos-1),3,'0')||substr(temp,pos);
     end if;
-- Find 2nd occurance of '-'. If not in correct postion, pad map num with zeros.
     pos := instr(temp,'-',1,2);
     if pos != 7 then
temp := substr(temp,1,4)||lpad(substr(temp,5,1),2,'0')||substr(temp,pos);
     end if;
     -- Pad item num
     len := length(temp);
     lastch := substr(temp,len);
     temp := substr(temp,1,7)||lpad(substr(temp,8,len-1),3,'0');
     if lastch between 'A' and 'Z' then
          temp := temp||lastch;
     end if;
end if;
temp := replace(temp,'-','');
     if prcl_ty(temp).isValid then
return (prcl_ty(temp));
     else
     raise invalid_format;
     end if;
END;
END;
Rich Hall
[email protected]

You are correct in your assumptions. Client side PLSQL does not support user defined types like the one you are trying to use.
There are no workarounds I am afraid.

Need F4 Help for custom container element based on partner type

Hi Friends
I am displaying customer details in custom container .In that custom container I have a field Partner number,Partner type etc etc..
I included F4 help for partner number field, In that I referenced the following field.Now its coming perfectly.
wa_cat1-f4availabl = 'X'.
wa_cat1-ref_table = 'KNA1'.
wa_cat1-ref_field = 'KUNNR'.
But as per my requirement, customer wants to get the different F4 help when the partner type eq "Contact Person".
Rest of the partner type(Ship to party, Sold to party,Reseller, End user) should show the above one.
So I dont know, where I have to change, because in the field catelod level there is no option to control particular type in the column.
Kindly help me on this.
Thanks
Gowrishankar

Hi Jose
Thanks for your Input.I created Event Receiver than Defined and implemented a method to get F4 help for customer number and email id field.Already F4 help is available for Email ID.Now I want to Include the F4 help for partner number field, it will call the search help based on partner type.I can able to get the partner number field search help, but F4 help is not working for email id.
I am not sure some whee its over writing some values or I am not sure.If I comment partner number F4 help class, I can able to get the F4 help for email address.
Plz guide to me to fix the same.
Thanks
Gowrishankar

Business Partner Types

Hi Experts,
Under the SAP IMG -> Cross Application component, there is a function named, Business Partner Types. Can you please explain me what is the use of this in real time. Please explain this with real time example.
Thanks
Edited by: Navneet Singh Rana on Sep 29, 2011 2:45 PM

Hello, I'll try to be as clear as possible
BP types mean the classes of BPs that you segment in your company. SAP delivers 2 "dummy" types, but you must create your own. Depending on the business partner type, you will be able to hide or show certain fields in your BP screen, making easier access to the information for backend or front office agents.
Now, imagine you work in a Sales Office. You have premium customers and non-premium customers. For premium customers, you want a BP screen where you can see their special features (such as, say, the monthly income), and for non-premium, you don't want to show these features. In this case you would define ZVIP and ZNON partner types and, in another customizing task, you will be able to define which fields are visible display only or mandatory for your ZVIP and ZNON customers.
When you create a BP, you assign the ZVIP or ZNON so system can show certain fields or not.
I hope it was clear enough
Joaquin

Where do we define partner types like KU,LI,VS,LS...?

Similar Messages

Maybe you are looking for