Where do we see bluetooth transferred video files ...

Using bluetooth just transferred video from my old mobile corby to lumia620 ..but i cant see it videos - music& videos ...can anyone
Moderator's note: The subject was amended.

yogeshmohite, does this help?

Similar Messages

How to see name of video files in iOS7?

How to see name of video files in iOS7?

Hi cnavap81,
Thanks for visiting Apple Support Communities.
You can hide or unhide purchases using iTunes on a PC or Mac. This article explains how to do so:
iTunes Store: Hiding and unhiding purchases
http://support.apple.com/kb/HT4919
Best,
Jeremy

Trouble Transferring Videos Files from computer to ipad in ios 8

Hello -
I'm a bit confused about the "sharing" aspect of what used to be the "home videos" section in itunes for transferring video files to my ipad. It appears I can only access these files when my itunes is open and able to be accessed via wifi. What am I missing? I would like to have the files themselves on the ipad so that I can watch videos when not connected to the internet, and not near my computer.
Apologies, this is probably an easy fix - I haven't been able to find an answer,
Elizabeth

Hello there, Elizabeth.
For answers to any of your Apple related questions, you've come to a great place. The following Knowledge Base article offers up some great inforamtion on how to sync content to your iOS device:
iOS: Syncing your data with iTunes
http://support.apple.com/kb/ht1386
Thanks for reaching out to Apple Support Commuities.
Cheers,
Pedro.

Close Captions can't see audio from video file

Trying to close caption a video file using Slide Notes in Captivate 5. Inserted Video via Insert>Slide Video, added notes via Slide Notes and checked off cc box. When I go to Audio dialog (Audio > Record > to Slide), my notes show up only as notes, the captions tab is empty. No audio is displayed for the slide (because it is expecting me to record or import some audio).
From what I've read, this audio dialog box is where I synch my slide notes as captions, but I can't see any audio or video synch reference at all -- even duration / frame count would work.
Do I need to import a separate mp3 version of the movie to synch to?
Any suggestions?

I figured it out - typical obvious error on my part. If I'm captioning a MOVIE, I need to adjust the timing via the Video tab, not the audio tab.

Transferring Video Files without Losing Project Links

I know this issue must have been addressed in the archives, but I can't seem to find the specific issue. Hope someone can help. The online manual is no help.
My C: HDD is filling up with video files, and I'd like to move all video files (and future files) to a new 2TB disk that I have installed dedicated for that purpose. I intend to leave Premiere Elements 4.0 and my .prel projects in my existinng C: drive.
How do I do this safely, without losing the links between the raw video files and clips inserted in my project?? Thanks.

the Archiver seems straightforward, but I will then have my .prel project on a drive different from the Premiere program. Somewhere I read that this is possibly unstable. Any opinions?
Actually, this is preferred. On a two, physical HDD setup, allocation like this is best: Not sure where you saw a rec. to have the Project on the same drive as the program.
C:\ OS, program files, and maybe the Windows Virtual Memory (Page File)*
D:\ Project, Assets and Scratch Disks
If one has a 3 HDD I/O, this would be the best
C:\ OS, program files, and maybe the Windows Virtual Memory (Page File)
D:\ Project, and Scratch Disks
E:\ Assets
* A bit of experimentation might indicate that the Page File does better on another HDD, as far as ultimate performance is concerned. I have two different Page File locations, on two different machines. On one, splitting the statically managed Page File over C:\ and D:\ yielded the best performance, while on another computer, locating it fully on E:\ was best. Just depends, though locating on C:\ will usually be pretty good. For video-editing, I do like to statically manage the Page File, as is explained in this ARTICLE.
Good luck,
Hunt

Transfering video file Help

I recently purchased the video ipod and planned to transfer all of my files... one problem they are not .mov... they are all windows media vido files...
How do i change them so they can play on my ipod...
When i try saving it as a .mov it tells me i must install quicktime... well i have quicktime and quicktime pro...
Or when i do save it and try to open it it denies it and tells me its not a movie file ???
SOMEONE PLEASE HELP !!!
Windows XP

from a post from monkeyboy67:
Hopefully in answer to the many posts on “how to get various video formats onto your iPod” I have put together a summary of applications I use. I have tried a few others with varying amounts of success (some of which are free) - I have finally plumped for the software produced by Xilisoft as providing good quality video relatively affordable cost for use with PC’s and numerous MS operating systems. The link below takes you to their site which not only allows you to download trail versions of their software but also has a comprehensive set of tutorials and FAQ's for their iPod video conversion software.
I have regularly used these applications to convert various file formats to iPod friendly video. They are simple to use although frequently processor and RAM hungry:
Use Xilisoft iPod Video Converter if you want to:
[*]Convert various video file formats to MP4
[*]Convert most audio file formats to MP3
[*]Extract audio from video file and save to MP3
[*]Encode several files simultaneously
[*]Pause encoding process to run other CPU time consuming programs at any time
Supported file formats:
Video:
[*]MPEG(mpg, mpeg, dat, vob); WMV; ASF; AVI; QuichTime(mov, qt); MPEG4(mp4); 3GP; DV(dv,
dif); Real Video(rm); Animated GIF(gif - decoding only); Macromedia Flash(swf - decoding
audio only);
Audio:
[*]MPEG Audio(mp2, mp3); WMA; WAV; AU; MPEG4 Audio(m4a); Real Audio(ra); OGG; AAC; Raw
AC3(ac3); NUT Open Container Format(nut);
To convert DVD's to an iPod friendly video format:
Use Xilisoft DVD to iPod V4:
[*]Just pop the DVD in your drive select compression variables (default settings work well) and sit back!
All these products are available on a "try before you buy basis", yes there are applications for XP which are free but and may work just as well but I have converted many hours of video for my iPod without hassle using the Xilisoft products (no I don't work for them!). Check there web site HERE

Transfering video files to external hard drive

I'm trying to transfer videos off my macintosh HD and onto an external hard drive. Using cut and paste, and the drag and drop method. When using the drag and drop the OS pop up box says "could not be moved because "movie" cannot be modified". Also Videos within the hard drive cannot be moved. Anyone have any advice how I can get these files off my mac hard drive and into an external?
Thanks
Mike

Is this with any file or only with video files?

Where can i ask about Lifecam video file that won't work?

i used lifecam studio in order to capture once in a lifetime event. when i wanted to stop, the softwer didn't responded and i was left with 2:30 hours wmv file (1.78gb) that plays for like 1 minute and then stucks! what can i do ?! it's an emergency!

I'd ask them over here.
Windows
Video forums on Microsoft Answers
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Extreme trouble transfering video files to ZEN MX

I'm having trouble putting videos on my Zen MX. I've tried a multitude of ways to transfer the file(s);
. Using Centrale with a normal avi. file - convert unsuccessful.
2. Using Format Factory to change the avi. file using the preset conditions for Zen MX and then using Centrale with the new file - convert unsuccessful.
3. Using Format Factory to change the avi. file to WMA. format and then using Centrale with the new file - convert unsuccessful.
I just cannot understand why this isn't working. Any suggestions welcome, because if this doesn't work I'm going to have to buy an iPod and I can't be dealing with that shi.

please creative. Scrap the useless fileformat and start support the ones we actually use!

Transferring video files from camera to external drive.

Forum,
How do I transfer video, or indeed can I, to an external drive using Firewire?
I can connect the camera with Firewire 400 to the computer and the external drive with F/wire 800.
I have not tried because i do not want damage my kit.
Thank you
Michael Craven.

Just connect the drive and see if you can capture to it... many times you can, but sometimes you can't... depends on the FW bridge in the drive. If it's fast enough, you won't have a problem. You won't hurt anything trying at any rate. If it drops frames or something, then a firewire card added to your system to create a second firewire bus will fix you right up.
Jerry

Transferring video files ( dvd & blu-ray movies)

I can not transfer any movie that are over 3gb to my external hard drive ( my book live duo). Can someone please offer me some help.

To Everyone, I'm okay now, I simply didn't read the instructions correctly on transferring content to the external hard drive. Everything is working just fine. Thank you anyway. I appreciate people wanting to help. Thanks again. Bryon

Video files show very low resolution poster image

Using Indesign CC and the latest tools and content viewer I am creating Autoplay video animations for the cover of our weekly magazine.
With each issue I have published the same problem occurs where the poster image for the video file is very low resolution and makes our content look very amateur (for a brief moment) before playing the video file at full resolution.
I have tried creating animations using flash, photoshop and Edge Animate, exporting MP4, MOV and OAM files. The problem is present with all movie files and with the Edge animation files a white flash appears before the file plays.
Is there a solution for either of these issues? We are looking to continue to use animations for our covers and need them to look 100% crisp and clean.

Sorry to jump in but I'm having the same issue too!
I have an H.264 mp4 which I created in After Effects and inserted using the Media panel within DPS.
As you see below, it plays on page load and I have chosen the finished front cover to be the poster image when it ends from within the Folio Overlays panel. I have set the video to stop on the last page.
When the video stops you can see all the artifacting around the text which I would expect to be as crisp as the original PSD file I uploaded as the poster image.
Is there anything I'm doing wrong or is there anything that can improve the quality of the final still?

IPod recognize my video files as audio file

suddenly happens
I can only see all my video files (include Podcast) in Music option. my video playlist become music playlist. Same thing happen when I brose iPod with iTune. I've tried 5 Rs, doesn't help. what can I do to make video go back to where it should be. (I didn't back up any fo them)

alright ive had this problem before and i love
helping w/this problem okay all you gotta do is go to
video settings and turn Tv signal to OFF if its on ON
thanks. I think you mean TV out, it's off, and TV signl is PAL/NTSC. I've try to change them, but either of it works.
is there any other possibility?

No sound on Sony video files in Lightroom 4

Hello. I can see my mts video files in Lightroom 4, but however they do not have sound. Is there anything that I could do to have the sound? (The sound is working for videos that I made with my Nikon 3100 camera, but not for the videos that I made with my Sony camera.) Also, is there a way to light the video files from Lightroom 4 to Adobe Premiere, as Adobe Premiere seems to have more editing capabilities and plays the sound from my Sony videos?

So, my understanding is that Lightroom does not support the codec used by Sony. Is there any plan in supporting it in the future?
Thanks,Nancy
Date: Wed, 28 Nov 2012 13:34:21 -0700
From: [email protected]
To: [email protected]
Subject: No sound on Sony video files in Lightroom 4
    Re: No sound on Sony video files in Lightroom 4
    created by Brett N in Photoshop Lightroom - View the full discussion
Please see: http://forums.adobe.com/message/4575043#4575043
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4881421#4881421
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4881421#4881421
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4881421#4881421. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

'Lost' or 'un-linked' video files in iPhoto 11

Hi Everyone,
In a nutshell, it seems that iPhoto can't find most of my video files, even though they are still there on the HDD. Additionally, it won't let me drag them onto / into the app.
Just updated to the latest iphoto 9.2.1 and the video files in my library (apart from some recent ones) won't play. If i click the thumbnail, the page goes to a ! in a triangle. If there is an image next to it on the thumnail page, that image will load. With the video file, if i go to File > Reveal in Finder > 'Modified File' /or/ 'Original File', they're both greyed out, which implies that iPhoto has 'lost' the file.
If i do the same with the image file, i can reveal the original in the finder, and see that the video file (ie .mov) is still there alongside the image file, and if i double click it, then it loads in quicktime and plays perfectly. If i try to drag that file into iphoto, i get the error
Unreadable Files: 1
The following file could not be imported. The file is in the iPhoto Library.
(It then gives me the true path and file name).
I have started up iPhoto with Cmd (or whatever it is) and ticked all of the boxes to rebuild the folders etc, but it doesn't work, and the fault remains.
At least i have the files (have heard some horror stories about iPhoto 11) but can anyone tell me how to get it all back working?
Cheers, and thanks in advance
slaterk
ps MP 3,1 OS 10.7.2

Thank you Terence for taking the time to reply - and thank you v v v much for giving me the answer!
Using iphoto library manager to rebuild the library meant that i could then add the images that weren't showing up, to get a full library back again.
Incase anyone else is coming after me:
i rebuilt the library with iPLM
went to the old iPhoto library and showed the contents of the package (right click on the iPhoto file)
Dragged over whole folders full of images / videos from the 'Masters' folder
Told it to ignore duplicates.
Also i found this, though it's dependent on you not having opened the library with iPhoto 11:
http://iphoto11.wordpress.com/2010/10/26/iphoto-11-fix/
though it may help someone.
Cheers

Where do we see bluetooth transferred video files ...

Similar Messages

Maybe you are looking for