Where do you look for shutdown with RSD ?

Can someone please tell me exactly where to look (and how) for the -72 and/or -82 shutdown errors?
Also, out of curiousity, how does the MAC log an error when the machine spontaneously and randomly shuts right down?

It is 20ms for Time to First Byte. 1ms applies to a stretched farm. You could look at your storage latency, although how you would do this would vary from NAS manufacture. You may want to look at your product documentation.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Similar Messages

Hiring Mangers - Where do you look for candidates?

I inherited an open Programmer/Analyst position and am looking to fill it. Besides Spiceworks ($100/60 days is cheap) where have Hiring Managers had good luck filling entry to mid-level programmer/analyst positions?
I know I'll end up posting in multiple locations but we are giving this one last shot before hiring a head hunter to assist us.
Thanks in Advance.
This topic first appeared in the Spiceworks Community

It is 20ms for Time to First Byte. 1ms applies to a stretched farm. You could look at your storage latency, although how you would do this would vary from NAS manufacture. You may want to look at your product documentation.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

My iphone after syncing with my mac is saying "64 items could not be synced, see i tunes for details" however I cant see what items are not synced as no obvious message. Where do I look for this info?

My iphone after syncing with my mac is saying "64 items could not be synced, see i tunes for details" however I cant see what items are not synced as no obvious message. Where do I look for this info?

Connect your phone to iTunes, then right-click on the name of your phone on the left sidebar and select Reset Warnings. Then sync again and you should get a warning listing the problem files.

One question I am looking for help with is, when you hit the history button I want my last fifty pages to show up instead of just fifteen. Is it possible to

one question I am looking for help with is, when you hit the history button I want my last fifty pages to show up instead of just fifteen. Is it possible to change that setting?
TY

The History menu can only show that fixed maximum of 15 as that is hard coded.
Maybe this extension helps:
*History Submenus Ⅱ: https://addons.mozilla.org/firefox/addon/history-submenus-2/

What application does an iMac come with that lets you see the core of its system, and what would you look for to determine if malware was on it?

What application does an iMac come with that lets you see the core of its system, and what would you look for to determine if malware was on it?

This extension?
*FireBug: https://addons.mozilla.org/firefox/addon/firebug/
Firefox 4 also has a build in inspector: Firefox > Web Developer > Inspect

HT5731 How can I download my TV episodes to my Macbook Pro. I bought them from my iPad2, and I looked for them with the same AppleID on iTunes Store and they wont download to my iTunes.

How can I download my TV episodes to my Macbook Pro. I bought them from my iPad2, and I looked for them with the same AppleID on iTunes Store and they wont download to my iTunes.

What country are you in ? Depending upon what country that you are in then you might be able to redownload them on your Mac's iTunes via the Purchased link under Quicklinks on the iTunes store homepage
If you're not in a country where TV programmes can be redownloaded then connect the iPad to your Mac's iTunes and use the File > Devices > Transfer Purchases to copy them over from your iPad

Where to start looking for _JVM_SupportsCX8@0 error

I compiled a Java applet with jdk1.1.8 that html runs fine on Explorer 6.0.2800...
but when I run on Netscape 7.0 I get an error:
The procedure entry point JVMSupportsCX8@0 could not be located in the dynamic link library jvm.dll
I need a suggestion where to start looking for a solution.
Netscape or

You might need to use the Object & Embed tags rather than the Applet tag in your HTML. IE allows you use sun's JVM for the Applet tag, but I don't know about Netscape. Look for HTMLConverter to convert HTML files that support both tags.

How do EDGE charges work/where do I look for itemized billing GoPhone Pic

How do EDGE charges work/where do I look for itemized billing. I have the GoPhone Pick Your Plan. The AT&T _phone call_ charges are clearly itemized on line at AT&T.
Can I view the charges for the Media Net Unlimited feature package? I have connected to WiFi at the local coffee shop. I have connected briefly to a local TV weather page while using EDGE. I fear the twenty or thirty dollar charges I have read about if I do any serious use of Safari while using EDGE.
I have explored this on the following:
http://www.lindenlan.net/2007/08/15/prepaid-vs-contract-att-gophone-or-nation-pl an/
and
http://www.tuaw.com/2007/09/24/prepaid-data-packages-and-the-iphone/
and both suggest I will be thoroughly reamed unless I am on a WiFi hot spot.
Every time I read the word "Unlimited" in my unlimited Media Net package there is the dreaded double asterisk "**" and the warning "additional per minute charges apply.
I don't see a charge for my maiden foray onto the internet using EDGE to view the weather page at KKTV so where is it. Surly I cannot use EDGE without charges on this turkey plan. Or can I ?

How exciting ! You have gone way beyond the call of duty for me. I appreciate it; thanks. I am so pleased with the iPhone but did not want to spend my life in coffee shops just to use it. Also I need the map function at work to help my customers and we have no WiFi there yet. But looks like I am ok at work on EDGE.
Every other day I was oscillating between being extremely pleased with my purchase and then chastising myself for spending all the money on the service that I was sure would be inadequate. I don't call much and considering how fast things are changing I don't want to be locked into a two year contract though I understand Apple is locked into five years exclusively with AT&T.
I hope good things come your way !
Message was edited by: barkingmad

I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7. Can't find "Software Update" option under General Setting. Where might I look for the option to slightly upgrade the ISO for this device?

I'd like to update the ISO 4.2.1 on an old iPod Touch to ISO 7. Can't find "Software Update" option under General Setting. Where might I look for the option to slightly upgrade the ISO for this device?

You likely have a 2G iPod and those can go higher than 4.2.1
A 3G can go to 5.1.1
IA 4G, with cameras can go to iOS 6.1.6.
The 5G, also with cameras can go to iOS 8
To update
The Settings>General>Software Update comes with iOS 5 and later.
Connect the iPod to your computer and update via iTunes as far as your iPod model allows
iOS: How to update your iPhone, iPad, or iPod touch
- A 2G to 4.2.1. Requires iTunes version 10 or higher. If a Mac it requires OSX 10.5.8 or later.
- A 3G to 5.1.1 Requires iTunes version 10.5 or later
- A 4G to 6.1.6 Requires iTunes version 10.7 or later. For a Mac, that requires a Mac with OSX 10.6.8 or later
- A 5G to iOS 8 Requires iTunes 11.4 or later if you update via iTunes
Identifying iPod models

Where do I look for all my photos?

When I enter TM, if I click on Pictures under Places the window that opens shows iPhoto Library under an icon with a sunset picture that resembles the iPhoto symbol in the dock. When I click on that, a window opens that gives information about the latest modification date. Where do I look for the actual photos?

C34captain wrote:
I have had a similar problem for some time. All my pictures show up under now, but if I scroll back using the time bars on the side, all the pages are blank with a text that says "loading photos", but nothing ever shows up no matter how long I wait. I access time machine both ways and I get the same result.
That doesn't sound good. Where are your backups (external disk, Time capsule, etc.)? How big is the +iPhoto Library+ on your internal HD?
You might try doing a +*Repair Disk+* (not permissions) on your TM drive/partition via Disk Utility (in your Applications/Utilities folder).
If that doesn't help, take a look at your logs for the time you were trying to see the photos. Use the Console app (same place) to see if there are any messages indicating a problem.
When it starts, click +Show Log List+ in the toolbar, then navigate in the sidebar that opens up to your system.log and select it. Navigate to the time that you noted above, then see what follows that might indicate some sort of *error, failure, throttling respawn, termination, exit,* etc. (many of the messages there are info for developers, etc.). If in doubt, copy and post (a reasonable amount of) the log here.

Where do i look for a possible back up

OK last try
my 8 yrs old has remote wiped my i phone 4s ....using find my i phone app wit his ipodtoch ,i have lost all my data, but i would like to recover my 400 photos
where do i look for a possible back up my contact info and music are on my macbookpro laptop but i dont see the photos ,i dont see i cloud is telling me hey we ha have it and do this and that HELLLLLLLLLP consider it Xmass gift. Yes i was stupid to let him use my apple id so he can use it with hi

On a Mac the backup should be under :
~/Library/Application Support/MobileSync/Backup/
But only the restore process will be able to make any sense of the backup files. Have you tried restoring to your last backup ? Backups and restoring

HT1620 Where do I look for the security key when I download an item. Your website says your key is 0xD0261077

Where do I look for the security key when I download an item. Your website says your key is 0xD0261077?

Your question is somewhat terse, and I might infer you're conflating the PGP key used for Apple security-related email communications with cryptographic hashes (message digests) used to verify the integrity and the origin of files, and with digitally-signed binaries. While these areas are somewhat related, details vary. (If you're already familiar with this stuff, my apologies.)
The Apple PGP key is used to sign (verify) messages from the security folks at Apple, and can be to encrypt messages sent to the Apple security folks. See this Apple Security PGP web page for details on using the PGP key for message verification and for message encryption.
File downloads are implemented differently, and will generally involve a particular cryptographic hash or message digest (and not necessarily a PGP key), and what might be used used varies by the particular website and the download involved, with some sites using the older and insecure MD5, and with others increasingly using some variation of the less-insecure SHA cryptographic hash. Depending on the scheme used, these can protect against corruptions, or can also be used to sign the binaries. The system that Apple is encouraging developers to use is called Developer ID.
Shell commands used and useful here include md5 and various openssl commands for the sha hashes/digests.
If you have a particular public web site or file download, post a pointer and I'll have a look.

Looking for Help with Hyperion to JAVA

I am looking for help with connecting Hyperion to Java. We are in Maryland but would be willing to work out something for remote consulting. If you have experience with connecting web services, hyperion, and Java and would be interested in about 80 hours of consulting please contact me at:[email protected] x4846

Hi,
From your description, you want to achieve the following goal:
Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support

Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).

Looking for help with respect to configuring MS Exchange server to handle attachments over 10 MB for forwarding to Salesforce (Email-to-case).
Problem - SFDC does not create cases from emails that have more than 10 MB of attachments. Our clients will not go-live if their clients cannot send in emails with attachments over 10 MBs
Potential resolution - Configure MS exchange to strip off the attachments(if over 10 MB) and store it in a public folder, forward the email to Salesforce (so the case gets created or the email
is associated to an existing case), the client should have some way to know if the attachments were stripped off and should be able to dlownload the attachments and continue with case resolution.
Any help is appreicated!
Thanks

Hi,
From your description, you want to achieve the following goal:
Configure Exchange to filter the attachments if the size is over 10 MB and store it in a public folder, and then forward the email to Salesforce.
Based on my knowledge, I'm afraid that it can't be achieved. Exchange can filter messages with attachments, but it couldn't store these attachments on public folder automatically. Also, I don't see any transport rule can do it.
Hope my clarification is helpful.
Best regards,
Amy Wang
TechNet Community Support

SpaceX is looking for engineers with LabVIEW experience in Hawthorne CA (LA area)

SpaceX is looking for engineers with LabVIEW programming experience for our Launch group. Our responsibilities include:
Controlling launch pad equipment via PXI/LabVIEW
Commanding and monitoring our Falcon 1 and Falcon 9 rockets via a LabVIEW-based Vehicle control system
Commanding and monitoring our Dragon capsules via a LabVIEW-based Mission Operation system
Ocean recovery of Falcon 1 and Falcon 9 stages after liftoff and Dragon capsules after splashdown
Cargo configuration of Dragon capsules going to resupply the International Space Station
Maintenance of Mission Control Centers with the help of our IT department
With the exception of the launch pad equipment program, most of our LabVIEW programs do not interact with DAQ hardware (unusual, I know). The Vehicle control and Mission Operations software get their data via Ethernet from 'black boxes' that connect to NASA & Commercial RF ground stations. We also create several utility programs in LabVIEW that also don't interact with hardware. So, this is mostly a software gig, not a hardware/software gig.
Ideal candidates will have the following qualities:
CLD-level LabVIEW experience
A good understanding of basic computer networking (TCP/IP, UPD, firewalls, VPN)
Must be enthusiastic about space (What year did we land on the moon? How many men walked on the moon? How many Space Shuttles do we currently have? etc.)
Must be willing to travel. Common destinations include Houston (NASA Johnson Space Center), McGregor TX (test site), Cape Canaveral FL (launch site), Kwajalein Marshall Islands (launch site)
Must be able to work without supervision. We have a very flat management structure, no one will be telling you what you need to do. If you don’t know, ask. If you do know, get it done.
About the job:
Job is located in Hawthorne, CA in the Los Angeles area.
This is not a 9-5 job. There will be some late nights.
You won't be LabVIEW only. Everyone chips in as needed. Our group has done Javascript, C++, MATLAB, configuring of TELEX comm systems, cutting of metal with bandsaws, welding, Unigraphics CAD, etc. If we need it and you don't know it, grab a book and learn.
We are only hiring full time employees. Contractors need not apply.
To conform to U.S. Government space technology export regulations, SpaceX hires only U.S. citizens and U.S. Permanent Residents.
Apply at SpaceX.com. Click the Careers button and fill out the general application. Mention this posting in the cover letter field. Don’t reply to this forum. You need to go to SpaceX.com to get your information into our system.
Message Edited by Lavezza on 03-31-2010 03:59 PM

There is a job posting up now at SpaceX.com. Go to the careers tab and search for LabVIEW.
Look for the position called: Mission Control Software Engineers (LabVIEW).

Where do you look for shutdown with RSD ?

Similar Messages

Maybe you are looking for