Where do you put the grey wire?!

I just bought me some slightly used t7700's, and I noticed that it has the cable with 4 colored plugs at the end- one grey, one orange, one green and one black. However my sound card (Audigy 2 zs) only has 3 holes for inputs! On the website where it says how to plug them,
inhttp://ask.americas.creative.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=55,E=0000000000059732096,K=40,Sxi=0,Question38 95=obj(3895)bj(3899)
it says i'm supposed to have only 3 plugs on one end of my wire. I tried to mess around with this, plugging them in whatever combination I can find, but the best I get is two speakers not working. So where do I plug the grey wire?

ph33r,
The audio cable that are bundled with the speaker had 3 plug on one end and 4 plug on the other end. You are to connect those 4 plug end to the subwoofer and the 3 plug end to the sound card. If you had purchase from another person then it's best to check with him if he had given you the wrong cable.
Jason

Similar Messages

  • Where Do You Put The Un-Ziped Files For...

    The manual is unclear.
    Where Do You Put The Un-Ziped Files for Contact Sheet X in CS4.

    CSX v1.4.2 README
    INSTALLATION:
    If there are previous versions of CSX, be sure to remove them at
    this time. Failure to do so may result in 'Copy' errors during installation.
    Unzip the CSX zip file into a temporary directory. It's location is
    unimportant EXCEPT DO NOT unzip it anywhere your Photoshop application tree.
    Run the InstallCSX script in the top-level directory. You can do this by:
    1) double clicking it
    2) dragging it onto a PS application
    3) running it from inside PS via File->Scripts->Browse
    If your OS is Vista, you will probably need to start Photoshop using
    'Run as administrator' because the installation script needs to install
    CSX into Photoshop folders that are normally protected.
    If you have more than one installation of Photoshop on your computer, you'll
    need to run the installation script for each copy of Photoshop.
    When the installation is complete, you can removed the contents that you
    unzipped before.
    MANUAL INSTALLATION:
    You don't need to do this if you ran the InstallCSX script.
    If there are previous versions of this script, be sure to remove them at
    this time.
    Unzip the distrubution file in your Photoshop Presets/Scripts directory and
    restart Photoshop. "CSX-1_4_2.jsx" should appear in your File->Scripts menu
    in CS2.
    With CS3 and CS4, CSX should appear under File->Automate menu as
    'Contact Sheet X v1.4.2...'.

  • Where do you put the upgraded raw or dng file in the latest Lightoom 5????

    How do you upgraded your raw or dng in lightroom 5, Where does it go.?

    Not sure exactly what you mean? Are you inquiring about what happens when you upgrade from an earlier version of LR to version 5?
    Maybe the link below can provide some answers.
    How To Upgrade To Adobe Photoshop Lightroom 5

  • Where do you put the  SMTP Server Name  ?

    I am trying to set up the email address of the SNMP.
    i can set up the Server SNMP Agents and the trap destinations, but can't find where to specifiy the SMTP Server Name i.e our company email address name [email protected]
    I looked in security realms can't find it.
    Any ideas

    Hi,
    Here is sample setup for AIX machine.
    SETUP:
    GC agent installed in AGENT_ORACLE_HOME
    RDBMS installed in RDBMS_ORACLE_HOME
    Database and listener up and running, monitored by Grid Control,
    this implies that the AGENT_ORACLE_HOME/sysman/emd/targets.xml contains the correct credentials for the database.
    The listener name given ion RDBMS_ORACLE_HOME/network/admin/listener.ora is identical to the name of that listener target in Grid Control.
    AGENT_ORACLE_HOME/network/admin/sqlnet.ora must exist.
    SETUP steps needed for operating system AIX:
    A. AIX is using its native snmp deamon pointing to the snmpdv3 deamon (this is the default on AIX5L):
    [hostname]/root> ls -l /usr/sbin/snmpd
    lrwxrwxrwx 1 root system 9 Jul 24 2009 /usr/sbin/snmpd@ -> snmpdv3ne*
    B. The script AGENT_ORACLE_HOME/network/snmp/peer/start_peer has needs to be corrected on AIX :
    1. the locations of "whoami" needs to be corrected from "/usr/ucb/whoami" to "/bin/whoami"
    2. the command starting the os snmp deamon must be changed to
    $SNMPD $SNMPD_OPTIONS -p $NEW_SNMPD_PORT >snmpd.out 2>&1 &
    Alternatively add two blocks for operating system AIX:
    elif [ "$uname" = "AIX" ] ; then
    USERID=`/bin/whoami`
    SNMPD=/usr/sbin/snmpd
    SNMPD_CONFIG=/etc/snmpdv3.conf
    SNMPD_OPTIONS=""
    BP="AIX"
    TRPCMD="exit 1"
    ENCAP_OPT="-s 1160"
    elif [ "$uname" = "AIX" ]
    then
    echo "Starting $SNMPD ..."
    echo "$SNMPD $SNMPD_OPTIONS -p $NEW_SNMPD_PORT >snmpd.out 2>&1 &"
    $SNMPD $SNMPD_OPTIONS -p $NEW_SNMPD_PORT >snmpd.out 2>&1 &
    Starting up emsubagent
    None of the following processes must be upp and running: snmpd, emsubagent, master_peer, encaps_peer
    The following ports must not be allocated: snmp, smux, 161, 1161, 199
    run as root:
    ORACLE_HOME= <full path to the AGENT_ORACLE_HOME>
    export ORACLE_HOME
    $ORACLE_HOME/network/snmp/peer/start_peer -a
    This must start the following processes as root: master_peer, encaps_peer, snmpd
    As agent ORACLE_HOME owner run
    AGENT_ORACLE_HOME/bin/emctl start subagent
    The snmp_*.ora files needs to be copied from AGENT_ORACLE_HOME/network/admin to RDBMS_ORACLE_HOME/network/admin
    Restart the listener, query the listener status
    "RDBMS_ORACLE_HOME/bin/lsnrctl status <listener_name>" must show: SNMP ON
    Regards,
    Kal

  • Where should i put the DEFAULT&SMARTBAR

    Hello,
    where should i put the DEFAULT&SMARTBAR ? and the main Menu ?
    in order to be shown in each form..
    in using Forms 6i.
    Regards,
    Abdetu..

    Hello Gerd,
    Thanks for reply..
    put such things into *a reference form* what is meant by a reference form do u mean the main form?
    Create a property class (PC) for your FORM-MODULE-properties,
    put this PC into the reference form.
    Create there an object group (OG), put the PC into the OG and the inherit the OG to your local form.
    Automatically you have then the PC inherited too.i did all what u mentioned..
    Bbut the problem is that the DEFAULT&SMARTBAR
    can't be seen in allllllllllll my forms in the main menu inspite of i put it into the form module property ->in the intial menu property.
    Regards,
    Abdetu..

  • Where should I put the sevlet

    I just started to work with Tomcat and I compiled the helloWorld sevlet.
    It's said from a book that the sevlet should be placed in serlver_root/webapps/ROOT/WEB-INF/classes, however there isn't a "classes" folder in my WEB-INF folder. So I put the helloWorld sevlet in the WEB-INF folder.
    Then I type http://localhost:8080/servlet/helloworld in my browser, I get a message from the sever said "The requested resource (/servlet/HelloWorld) is not available".
    Could anybody tell me how can solve this prolbem, where should I put the sevelt?

    have ones more a look to your book - especially to information about the configuration file "web.xml" which also should be placed in the WEB-INF folder. This file defines which servlets should be found by the server and which request-URL should be mapped to this servlet.
    for examples concerning the web.xml file see those already defined in your server. copy one and edit it for your needs. if you really want to understand what else might be configured using web.xml see the DTD for this file - it's pretty good documented!
    hope it helps :)

  • Where Should I put the time capsule?

    Where Should I put the time capsule?
    I'm using a wireless modem/router provided by the internet company, and both (the TC and the router) are located next to the pc, in the living room . Using this way, I don't have signal in my bedroom. Should I get a signal amplifier?
    Thanks!

    It would be better to use EOP adapters (homeplug is another name) or ethernet to locate the TC closer to your room.. you can use another apple router to extend the wireless if you need to.

  • I own the original (color photometer) EYE1 PHOTO. I use Windows 7; where do I put the printer profile?

    Where do I put the (original-color photometer) EYE1 printer profile in Windows 7?

    You could try to put it here:
    C:\Program Files\Common Files\Adobe\Color\Profiles
    Copying the color folder from your laptop? I don't know - it might work, but I would create a restore point beforehand,
    I'm no expert on Windows, so hopefully somebody more knowledgeable might be able to help you.

  • TS2662 Where do I put the disk in the computer

    Where do I put the disk in the computer

    A bit more info on what you want to do?
    What kind of disk is it and what do you want the computer to do with it?

  • Where do we put the favicon.ico?

    I know that we have to put it in our file in idisk but where exactly?
    Thank you
    Odette

    If you're hosting your site with MobileMe and have a domain name which you're forwarding with CNAME forwarding you just put the ico file in your iDIsk/Web/Sites folder. 
    If you're hosting to a 3rd party server you put the file in the same folder/directory that you upload your site to.
    If you're hosting your site to MobileMe without a domain name put the favicon.ico file in the iDisk/Web/Sites folder and add the following code to an HTML snippet on each page:
    <script type="text/javascript">
    var head = parent.document.getElementsByTagName("head")[0];
    var favicon = parent.document.createElement("link");
    favicon.rel = ("shortcut icon");
    favicon.href = ("http://web.me.com/your_MobileMe_Account_name/favicon.ico");
    head.appendChild(favicon);
    </script>
    Thanks to  Koeklin from this topic:
    http://discussions.apple.com/thread.jspa?messageID=11234670#11234670
    It's a one time addition to each page of your site and no post publication editing of the site's pages are necessary.
    OT

  • Where does iphoto put the library?

    where does iphoto put the library?
    i thought it would be put in the pictures folder but at least in my case it is not there! the folder is empty.
    I can import pictures and they show in iphoto and frontrow but I would simply like to know where on my harddisk they end up.
    anybody?
    thanks

    Chris
    No! Don't make anew library it will overwrite your old one.
    It's there somewhere, it's just that it's visibility status has changed (why??)
    Anyway try the following:
    go to http://www.cocoatech.com and download Pathfinder. This is an alternative to the Finder - and it has extra features, among them a View-> Show Invisible Items command. This might help us find it.
    Pathfinder is shareware, but you can use it for a trial period without paying.
    Regards
    TD

  • HT4199 where do I put the micro sim for the iPad, dosent seem to be any where to insert the card

    Where do I put the micro sim for the iPad , I cant find any where to put the card.

    What model is your iPad? (iPad, iPad 2 or New iPad). Did you get the AT&T or Verizon model? If you got the Verizon model, it doesn't have a SIM slot.

  • Where I should put the bean class?

    Hello,
    I am learning JSP. I want to know where I should put the bean class? Which directory should I put the bean class?
    note that I am using Tomcat 4.1
    johnwen
    24-12-2005

    I can't tell if you've got everything you need or not, but what you've shown looks right so far. Let me run down the necessities:
    In your JSP file:
    <%@ page import="aos.*" %>
    <%-- imports all of the classes in the "aos" package --%>
    In your Java file:
    package aos; // tells Java this is a package (you probably have this)
    Then, of course, you put the class file into the directories that you mentioned, ie, $CATALINA_HOME/ROOT/WEB-INF/classes/aos (forgive me if I use Unix-styled slashes; old habit, and shouldn't make any difference.)
    You may need to restart Tomcat. You have to restart it when you add certain directories, although I'm not sure exactly which ones. But it never hurts to just restart it anyway.

  • Where do you put libflishplayer.so for firefox6 on mandriva 2010.2

    I am running Mandriva 2010.2
    just went to firefox 6 :)
    where do you put libflashplayer.so

    Does it work if you create a plugins folder in the Firefox Profile Folder and place a symlink to the Flash plugin (libflashplayer.so) in that folder?
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *Help > Troubleshooting Information > Profile Directory: Open Containing Folder

  • Which field do you put the 'network key' in?

    Does anyone know where you put the 'network key' I.D. in the utility client program?

    Welcome to the Apple Community.
    It sets itself automatically.
    Assuming this is not the first time you have used your Apple TV
        1.    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
        2.    Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
        3.    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
        4.    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Maybe you are looking for