Where does app.documents.add() get its document profile from?

It has a set of defaults listed in the scripting reference, I understand that much. but a new doc (without specifying anything else) also contains swatches/symbols/brushes etc. that don't seem to match any existing doc profile. Where is it fishing these from?

I tried various scenarios and documents.add() always matched the Print Profile, which happens to be the first in the list.

Similar Messages

Where does iTunes calendar sync get its info data from?

Does it get it from one source? for example, I see a birthday in iCal, but it does not want to appear on my iPhone, and I can't figure out why that should happen. I keep looking for a source of data that might not jive , like looking in Entourage address book or looking in Apples Address book. Both those sources have the correct information. I normally use Entourage as my mail program. Bottom line, my question seems to come back to what data source does the iphone/itunes interface use for Calendar sync, or for that matter, contacts, and mail?

It syncs to the program that you selected.
http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

(SOLVED) where does the xorg server gets the Composite file from?

I'd like to see the list of composite combinations. Seeking on the Internet I understand that the file should be:
/usr/share/X11/locale/en_US.UTF-8/Compose
Where en_US.UTF-8 is my locale, but according to that file:
<Multi_key> <underscore> <o> : "ō" U014D # LATIN SMALL LETTER O WITH MACRON
I should obtain the small letter o with the macro using multi_key underscore and o. Instead I obtain this: º.
Same problem with the
<Multi_key> <c> <o> : "ǒ" U01D2 # LATIN SMALL LETTER O WITH CARON
If I press the keys I obtain: ©, the copyright sign...
So... Where does the arch xorg got its Compose file? Change I change its behavior?
Thanks.
Last edited by ezzetabi (2009-10-10 15:25:02)

I ignored that is was an application side issue, thanks for explanation. And indeed I was using lxterminal: the terminal emulator of lxde that is based on GTK. Using the xim input system everywhere solved the problem.
People! Listen! Put this two lines in your .xinitrc :
. /etc/X11/xinit/xinitrc
export GTK_IM_MODULE=xim
export QT_IM_MODULE=xim
exec whatever you use
Thanks! Cheers!
Last edited by ezzetabi (2009-10-10 15:25:25)

Where does the svc system get its infos from?

The longer I work with Solaris 10, the more I dread this awful "services" construction and its unwieldy administration.
I have a newly setup machine with two zones, one created right after the other, meaning they should be identical.
/usr is, as usual, lofs'ed into both zones, and contains a /usr/local/samba dir with a handcompiled 3.0.30 release.
I have not created any manifests as I intended to simply delete the 'onboard' samba service and start the new version
via the classical init script.
I boot both zones.. and one starts "/usr/local/samba/smbd -D -f /etc/smb.conf", and the other starts (or tries to) "/usr/sfw/sbin/smbd -D".
I inspected the manifest xmls for the network/samba service, and in both zones the entry lists /usr/sfw as start method.
svccfg listprop network/samba also reports /usr/sfw for both zones.
Where did the one zone get the info to start the /usr/local samba installation, and where did it get the (correct) conf file parameter?
Why does svccfg report a different startup method property than it really runs on svcadm enable?
I have grepped through all of /lib/svc, /etc/svc and /var/svc and nowhere is any reference to the /usr/local file nor the conf parameters.
Swapping the svc repository.db file between both zones also swaps the problem around - so it must be somewhere in there,
but as it's no longer a human readable file, I'm out of luck there. How did the /usr/local path and parameters get into that DB file?
Does the service system search the filesystem for known daemon binary names and other guesswork? And if it does such voodoo,
why didn't it do the same in the other identical zone?
rant Did we really need to get this svc "feature"? Until now I have seen no advantage from it, and only incurred a huge load of inconvenience,
be it the additional work of creating manifests for new services or debugging problems that I never had in a decade or two of init script usage.
We have all seen for many years how well this registry/service stuff worked on Windows..*/rant*

>
I boot both zones.. and one starts "/usr/local/samba/smbd -D -f /etc/smb.conf", and the other starts (or tries to) "/usr/sfw/sbin/smbd -D".
I inspected the manifest xmls for the network/samba service, and in both zones the entry lists /usr/sfw as start method.I take it you mean the full path with /usr/sfw in it, not "/usr/sfw" all by itself....
What do you get for:
svcprop -p start/exec network/samba:defaultThat should display the start string it uses.
Where did the one zone get the info to start the /usr/local samba installation, and where did it get the (correct) conf file parameter?I can only assume that some program inserted that string into the service. As you said, it's not in the manifest, so it didn't come from there.
Why does svccfg report a different startup method property than it really runs on svcadm enable?
I have grepped through all of /lib/svc, /etc/svc and /var/svc and nowhere is any reference to the /usr/local file nor the conf parameters.
Swapping the svc repository.db file between both zones also swaps the problem around - so it must be somewhere in there,
but as it's no longer a human readable file, I'm out of luck there. How did the /usr/local path and parameters get into that DB file?
Does the service system search the filesystem for known daemon binary names and other guesswork? And if it does such voodoo,
why didn't it do the same in the other identical zone?
rant Did we really need to get this svc "feature"? Until now I have seen no advantage from it, and only incurred a huge load of inconvenience,
be it the additional work of creating manifests for new services or debugging problems that I never had in a decade or two of init script usage.As with many such things, the advangages are greater when the environment is more complex. For starting a single job, you won't see the benefits as much.
Of course, the milestone services still run startup scripts out of /etc/rc[S23].d, so those are perfectly valid places to run a startup script.
Darren

Where does list level number get its text attributes?

I am writing an applescript to change all of the text of one font to another (regardless of style). The only hangup I seem to be having is that the list level numbers do not change fonts even when the body of the paragraph does.
Any ideas?
TIA

Figured it out

Where does flash store Add-ins

Boils down to:
Where does Flash Store Add-ins?
Why do I need to know this?
I want to try something, theres a .deb for adobe connect addin, inside, a compiled binary, I want to try and see if I can throw that binary at flash as an addin and see if it'll work. I realize only Ubuntu is supported, but I've had this work with other things from Ubunto.
OS: A variation on Thinstation, linux for short
Flash Version: 10.1
Browser: Firefox

The data are in:
C:\Documents and Settings\{yourname}\Data aplikací\Macromedia\Flash Player\#SharedObjects\
where Data aplikací means something like application data or something like that in english.
I'm not sure if you can change that location. Maybe by hacking in registries.
o.

Where does an abap program get stored after save?

Where does an abap program get stored after save? ...plzz tell
Edited by: Alvaro Tejada Galindo on Feb 18, 2008 11:28 AM

this program download the code to presentation server
Analyse this code.
CHECK IT IN DEBUGGING
REPORT zdownload_source MESSAGE-ID zabap.
TABLES: trdir.
SELECT-OPTIONS: repo FOR trdir-name.
PARAMETERS: path(60) TYPE c DEFAULT 'C:\programs\'.
DATA: BEGIN OF tabsource OCCURS 10,
 source(72) TYPE c,
 END OF tabsource.
DATA: BEGIN OF tabtext OCCURS 50,
 tab LIKE textpool ,
 END OF tabtext.
DATA: BEGIN OF tabrdir OCCURS 100,
 rdir LIKE trdir,
 END OF tabrdir.
DATA: filename LIKE rlgrap-filename,
 mode TYPE c VALUE ' ',
 rdirrows TYPE i,
 sourcerows TYPE i,
 rc TYPE i,
 length TYPE i.
FIELD-SYMBOLS: .
DATA: ok TYPE i VALUE 0,
 fail TYPE i VALUE 1.
AT SELECTION-SCREEN.
DATA: i TYPE i.
DESCRIBE TABLE repo LINES i.
IF i <= 0.
 SET CURSOR FIELD repo.
 MESSAGE i001 WITH 'se message class'.
ENDIF.
START-OF-SELECTION.
CONDENSE path NO-GAPS.
length = strlen( path ).
SUBTRACT 1 FROM length.
ASSIGN path+length(1) TO .
IF <> '\'.
 ADD 1 TO length.
 ASSIGN path+length TO .
 = '\'.
ENDIF.
SELECT * FROM trdir
 INTO TABLE tabrdir
 WHERE name IN repo.
DESCRIBE TABLE tabrdir LINES rdirrows.
CHECK rdirrows > 0.
LOOP AT tabrdir.
 MOVE tabrdir TO trdir.
 PERFORM download_sourse USING rc.
 CHECK rc = ok.
* PERFORM download_textpool USING rc.
ENDLOOP.
write :/ sy-dbcnt , ' number of programs downloaded'.
*& Form download_sourse
* text
* -->P_RC text
FORM download_sourse USING rc.
rc = fail.
CLEAR: tabsource, filename.
REFRESH: tabsource.
READ REPORT trdir-name INTO tabsource.
DESCRIBE TABLE tabsource LINES sourcerows.
CHECK sourcerows > 0.
CALL FUNCTION 'STRING_CONCATENATE_3'
 EXPORTING
 string1 = PATH
 string2 = TRDIR-NAME
 string3 = '.ABA'
 IMPORTING
 string = FILENAME
 EXCEPTIONS
 too_small = 1
* OTHERS = 2
IF sy-subrc <> 0.
WRITE: 'AAAA'.
ENDIF.
CONDENSE filename NO-GAPS.
PERFORM download TABLES tabsource USING filename rc.
ENDFORM. " download_sourse
*& Form download_textpool
* text
* -->P_RC text
FORM download_textpool USING p_rc.
rc = fail.
CLEAR: tabtext, filename.
REFRESH: tabtext.
READ TEXTPOOL trdir-name INTO tabtext LANGUAGE sy-langu.
DESCRIBE TABLE tabtext LINES sourcerows.
CHECK sourcerows > 0.
CALL FUNCTION 'STRING_CONCATENATE_3'
 EXPORTING
 string1 = path
 string2 = trdir-name
 string3 = '.TXT'
 IMPORTING
 string = filename
 EXCEPTIONS
 too_small = 1
* OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM download TABLES tabtext USING filename rc.
ENDFORM. " download_textpool
*& Form download
* text
* -->P_TABTEXT text
* -->P_FILENAME text
* -->P_RC text
FORM download TABLES tabtext
 USING filename
 rc.
rc = fail.
CALL FUNCTION 'WS_DOWNLOAD'
 EXPORTING
* BIN_FILESIZE = ' '
* CODEPAGE = ' '
 FILENAME = filename
 FILETYPE = 'ASC'
 MODE = 'MODE'
* WK1_N_FORMAT = ' '
* WK1_N_SIZE = ' '
* WK1_T_FORMAT = ' '
* WK1_T_SIZE = ' '
* COL_SELECT = ' '
* COL_SELECTMASK = ' '
* NO_AUTH_CHECK = ' '
* IMPORTING
* FILELENGTH =
 TABLES
 data_tab = TABTEXT
* FIELDNAMES =
* EXCEPTIONS
* FILE_OPEN_ERROR = 1
* FILE_WRITE_ERROR = 2
* INVALID_FILESIZE = 3
* INVALID_TYPE = 4
* NO_BATCH = 5
* UNKNOWN_ERROR = 6
* INVALID_TABLE_WIDTH = 7
* GUI_REFUSE_FILETRANSFER = 8
* CUSTOMER_ERROR = 9
* OTHERS = 10
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc <> 0.
 WRITE: / sy-subrc, ' message declare '.
ENDIF.
rc = sy-subrc.
ENDFORM. " download
regards.
santhosh reddy
<REMOVED BY MODERATOR>
Edited by: Santhosh Reddy on Feb 13, 2008 6:48 PM
Edited by: Alvaro Tejada Galindo on Feb 18, 2008 12:00 PM

Where does the ACS server get the DNS info for IP pools?

I am trying to change the DNS servers that my VPN users are assigned from the IP pools on the ACS server. Where does the IP pools get the DNS server information. I have changed the DNS Ips on the windows server and rebooted. But the VPN clients are still being assigned the old DNS servers.

ACS ip pools do not push DNS server information
It is either being forwarded from VPN concentrator group setup or
it is being send from ACS user/group setup > Radius(VPN 3000) attributes > [026/3076/005] Primary-DNS.
Hope this helps.
Regards
Rohit

Where does WebDynpro ABAP URL get defaulted

When creating a WebDynpro ABAP application, the URL gets generated automatically.
My question is where does this path get generated from. Is there a place to edit the settings?
The reason why I ask is that the Basis team has disabled protocol HTTP and are now using HTTPS.
The problem is, our WebDynpro ABAP applications still get defaulted to HTTP in the URL string.
Where do you change the settings?

Yes, I replied to your question before realizing the answer had been given by Shruti. By going to tcode SMICM, in GOTO/services menu, I noticed that HTTP and HTTPS were both set to active. So, I inactivated the HTTP and by doing that the WebDynpro ABAP application URL's that get defaulted (tab folder adminstrative data) now default to HTTPS and the port defined in SMICM.
The Basis team had disabled HTTP, I assuming by removing the port address, but keeping the HTTP service active and this was causing a problem for all the WebDynpro ABAP programs. They were still defaulting to HTTP. Why they did not make this change I just did, I don't know.
I couldn't get anyone to take charge of this, so I did.
Problem solved.

Where does EXS 24 look for its samples with the normal installation?

Where does EXS24 put its samples normally on the Mac?

What will probably work is to refresh the Spotlight index.
http://support.apple.com/kb/ht2409
Note: after step 5, it can sometimes take up to a minute before indexing starts. Be patient, wait untill the whole process is finished before starting up Logic. You can check the progress by clicking the Spotlight icon (magnifying glass) top right of your screen

Where does the Connect Add In live on a Mac these days?

I installed the wrong one from the downloads site and need to uninstall and reinstall the right one. Where does it live in Mavericks?

woodhouse1898 wrote:
I have recently bought a Macbook Pro having previously been familiar with Windows. ...
You may find these Links of Interest and value...
http://www.apple.com/support/switch101/ Switching from PC
Show me how to set up my Mac.
http://www.apple.com/support/mac101/

Where does the file path get reported from?

When looking at ZAM software information, it'll show the product name and then like:
c:\program files\something\
Where does that path information come from?
The windows registry?
Or does it actually come from the location of the .exe itself?

kjhurni,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Where does the Document publisher used in Duet Entp. reporting reside.

Hi All,
I was reading on the architecture of Duet Enterprise reporting given in [this MSDN link|http://technet.microsoft.com/en-us/library/gg385205.aspx]. I wanted to know where the Document publisher and where the reports queue reside (SAP Backend or SCL) as explained in the diagrams in the above link.
Appreciate any help in understanding this architecture.
Regards,
Avishek.

Hi Binosn,
Thanks for your interest and reply.
Wanted to know some more details regarding the document publisher.
How does the backend push the report to the Gateway, is there also a queue maintained in the backend system which processes the report requests asynchronously or the Gateway report publisher pulls them synchronously or is there any component necessary to be installed in the backend system for processing reports?
Is the document publisher feature a gateway feature or a Duet Enterprise specific feature?
Please suggest some material for further details if available.
Regards,
Avishek.

In Trex where does the documents reside ?

We have Enterprise portal and use TREX for collaboration rooms and document indexing. EP is a java only Netweaver stack on AIX and TREX is on a window box. What I wanted to know is where do the actual documents, which TREX indexes reside?
Does Trex retain a copy of the indexed document? For a particular index where is the mapping of the actual document? Where can I look at all this data?
Pls advise.
thank you
regards
Laxmi

Hello Kai,
documents original location is transparent on KM, whether it is on a external repository or not doesn't matter,
for KM and TREX it is part of repository manager (configured at System Administration > System Configuration >
Knowledge Management > Content Managenement > Repository Managers).
Once a repository manager is activeted, there are several services running on top of it, eg.: subscription, rating,
etc. and other global services which affects every repository. Crawler service and Index Management are the
global services which will do indexing work
In fact TREX doesn't look for documents, the crawler is the component that retrieves the documents and
deliver for TREX. Have in mind that the crawler is part of KM, not TREX. It is active for every repository,
you can check on the monitor at System Administration > Monitoring
for more information: http://help.sap.com/saphelp_nw70/helpdata/en/fb/38ef207d0a47ee9dc08deeed855392/frameset.htm
once documents are retrieved by the crawler and is at TREX hands, it will index normally, it uses
a file system based architecture, if you browse through TREX server you can find the indexes you have
created as folders and documents information inside. Be careful when checking at file system level, data
there is designed for TREX work only, it doesn't serve as backup and can't be considered for any
other functioning.
kind regards,
Rafael

Where does a document go if it disappears

I was typing a document and had been working on it for a couple hours then all of a sudden it was gone and I couldn't find it anywhere. where did it go?

i didnt save it because its supposed to save automatically with the lion 10.8.3. unfortunately I think I wasted 2 hours! I have no idea how it just disappeared out of nowhere

Where does app.documents.add() get its document profile from?

Similar Messages

Maybe you are looking for