Where does HP BIOS flash update tool save old BIOS backup by default

Where does this HP BIOS flash update tool save old BIOS backup by default ?
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-69499-1&lc=en&dlc=en&cc=us&...

I think the gpu has failed again, if the bios was dead you would get no beeps, it is the bios that generates the hardware failure beeps.
Home brew reflows generally do not last too long or can cause more damage.
The reason the gpu comes loose on most of that vintage was due to 2 problems
1. Overheating
2. Poor quality solder used when the gpu and other motherboard components were flowed at the factory.
Reflowing it does not always work because of the quality of the ball solder they used, also you only get one reflow attempt, doing more than one weakens the original solder even more. Most likely the seller reflowed it shortly before selling it to you.
Proper repair is what is called a reball (solder replacement) of the gpu, not may repair facilities have the equipment to performed this, and is usually expensive procedure depending on the motherboard design.

Similar Messages

How and where does SAP standard programs update the master tables...

Hello there,
How and where does SAP standard programs update the master tables...
to be precise.. if a (any) transaction occurs the programs behind it holds the data in temporary structures.
where and when does it get updated in the master table.
can anyone tell me how it happens?
I Know that from the where used list one can find the corresponding table but most of the time it wont suffice
I am expecting a proper answer.
Santosh B

Hello Santosh,
you need to do some self-reading on the following topic
Updates in the SAP System (BC-CST-UP)
http://help.sap.com/saphelp_47x200/helpdata/en/e5/de86e135cd11d3acb00000e83539c3/frameset.htm
Regards,
Siddhesh

BIOS Flash Update Utility "Failed to Read BIOS"

As the title says.
The computer has been flakey on startup recently, so I want to update the BIOS.
I run the Thinkpad BIOS Flash Update Utility on my Thinkpad Yoga, it returns an error saying "failed to read the BOS".
Can anyone suggest a work around?

I am told that the update burn down the motherboard looks like a serious update
those who are going to do a bios update should think twice... I have done it a million times before.. never had a problem.
the worst part : I have a 160GB intel ssd that I bought to use with the new w510 is sitting idle on my desk.
ABOVE ALL , I AM STILL WAITING FOR THE WARRENTY SERVICE TO REPLACE THE PARTS AND SEND IT BACK TO ME...
I can't believe that I am going through this.. I am like a handycapped these days.
I ordered this laptop three months ago when it was introduced, by the time I ordered it went out of stock... I had to wait three whole months to get the laptop. I didn't even use it.

BIOS flash update to W510 = dead laptop

Hi ...
I just did an update to the BIOS flash that is given in the updates section of w510 ( windows utility ) upon sucessful update it asked for restart. Nothing happens just black screen. If I press 'Power ON" then it checks the capslock and some other lights but nothing on the screen, then it restarts itself a coupleof times then the thrid time it just stay on powered... CPU fan is running like crazy.
Brand new laptop... got it yesterday... was installing win7 ultimate and then installed drivers from lenovo site and on BIOS flash update "BOOM"
Is there anything I can do now to make it run again, or do I have to go and give it to the tech support guys ??

I am told that the update burn down the motherboard looks like a serious update
those who are going to do a bios update should think twice... I have done it a million times before.. never had a problem.
the worst part : I have a 160GB intel ssd that I bought to use with the new w510 is sitting idle on my desk.
ABOVE ALL , I AM STILL WAITING FOR THE WARRENTY SERVICE TO REPLACE THE PARTS AND SEND IT BACK TO ME...
I can't believe that I am going through this.. I am like a handycapped these days.
I ordered this laptop three months ago when it was introduced, by the time I ordered it went out of stock... I had to wait three whole months to get the laptop. I didn't even use it.

HT1926 Where does iTunesSetup.exe go when I save it?

I have repeatedly tried to download iTunesSetup.exe so that I can install an update of iTunes. Everytime I save it, no matter what the location, it does not appear there. I have set the view to show hidden files, but it still does not appear. Where does the file go?

Have you looked in your Downloads folder?

Please help:System keeps rebooting after Bios flash update

Hello,
Ok for starters I have the K9A2 CF motherboard,4GB of ram,My last Bios was 1.8.
I was flashing to 1.9 using the bios flash tool and a usb 1GB stick.The Bios flash went without errors and I rebooted.After this I booted back up.It gets to the 512Mb on the screen then poof,the system reboots automatically and keeps doing so thereafter unless I shut the PC off.How can I restore my Bios or fix this issue.This is not good as I cant even get to the post screen before it reboots to change anything.
Thanks,
K9A2 CF board
Windows Vista 64
4GB Corsair ram
80GB Stata HD
200GB IDE HD
DVD-RW Drive

Quote from: soldat32 on 06-August-09, 05:16:16
CPU Type QuadCore AMD Phenom, 2500 MHz (12.5 x 200)AMD Phenom X4 9850 Quad Core Processor HD985ZXAGHBOX - Black Edition, Unlocked 2.50GHz, 4MB Cache, 2000MHz (4000 MT/s) FSB, Agena, Quad-Core, Retail, Socket AM2+, Processor with Fan
No errors were found in my memory.My PSU seems to be working fine.My VGA is a XFX Nvidia 9600GT with 512mb.
Have you tried that?:
Quote from: Svet on 06-August-09, 03:52:32
Try with your second stick alone in the same DIMM slot.
Quote from: soldat32 on 06-August-09, 05:16:16
CPU Type QuadCore AMD Phenom, 2500 MHz (12.5 x 200)AMD Phenom X4 9850 Quad Core Processor HD985ZXAGHBOX - Black Edition, Unlocked 2.50GHz, 4MB Cache, 2000MHz (4000 MT/s) FSB, Agena, Quad-Core, Retail, Socket AM2+, Processor with Fan
Its 125W CPU.
Can you shows picture of your board? Is it V2? Is there a heatsink over mosfets?:

Adobe Flash update only saves file, how to activate it?

After receiving message from Firefox that I should download the Adobe Flash updater, I tried to complete this action. The only popup I get after I select this option is to Save the File or Cancel the action. After I save the file, nothing happens. How do I install Adobe Flash Update 10?

Make sure Firefox is closed. Then double-click on the Flash_setup file that you saved to start the installation.

Toshiba Satellite L730-120 Bios flash update.

I have just got my Satellite today and was updating the Toshiba drivers and tried to install a new bios update. I ran the program and the laptop restarted and has gone to a blank screen, power light on, and nothing. This was 10 min ago and stills no change. What should I do? It said not to turn it off.

Just to let you all know. I tried to turn the laptop off at the power button and no luck. So I tuck the battery out and unhooked the power to shut it down. Powered up and started in safe mode ok. What is it with flash updating had it brick a router and a net book

Laptop won't boot up after HP Support Assistant BIOS Flash update.

Updated my bios as recommended by the hp support assistant, now the lap top will not boot up. The fan runs for about 3-5 seconds then stop, power light on and Caps Lock LED flashes. I have an HP 2000-2a28DX running Win 7 Ultimate.

Try the procedure here>Restoring the BIOS:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02693833&tmp_task=solveCategory&cc=us&dlc=en&la...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Where does the manditory CF10 update needed to be copied to?

We are running ColdFusion 10,282462 on a Windows Server 2008 R2 (64-bit) server. There are several updates waiting to be downloaded and installed. Before I can install these updates I need to download and install a manditory update. I have downloaded the manditory update, but I am not sure where on our server that I need to copy the files included in the cf10_mdt_updt folder which I downloaded from your website. Where do I copy the downloaded files to on our server?

The file I downloaded was downloaded with the following filename cf10_mdt_updt.zip. I then ran an extract all and saved the extracted files to a folder called cf10_mdt_updt. I then copied the folder with the extracted files to the following folder c:\ColdFusion10\jre\bin. I then ran Command Prompt as Administrator and got the error message shown below.

Where does downloaded 2.0 update file get stored?

I purchased and downloaded the 2.0 update. It created a folder in my

It doesn't matter where the .ipsw files are located, which is why I moved them to a directory I back up.
If you hold down the option key while clicking 'Check for Update' in iTunes, a Finder window pops up to let you locate the restore files.

Where does the CS5 Automatic Update put temporary files?

I am getting the same error that I see other people have had. When I try to download and install CS5 updates using the automatic updater, I am told that the download failed and that I should try again later. My guess is that one of the files was damaged in the download, and that it chokes each time it tries to open it. I suspect that the "fix" is to delete all of the downloaded and temporary files and to start over, but I don't know where they are. Anybody know? Thanks.

The file I downloaded was downloaded with the following filename cf10_mdt_updt.zip. I then ran an extract all and saved the extracted files to a folder called cf10_mdt_updt. I then copied the folder with the extracted files to the following folder c:\ColdFusion10\jre\bin. I then ran Command Prompt as Administrator and got the error message shown below.

Why does not Shockwave Flash update?

I'm running on Windows Vista business with service pack 2. Firefox's (13.0.1) plug-in list said to upgrade Shockwave Flash. I did it but even if I restart computer, the plug-in still needs to be updated. Could someone help me? Thank you very much.

Which version of Flash do you have?
*http://www.adobe.com/software/flash/about/
*http://helpx.adobe.com/flash-player.html
You can find the latest Flash player for Firefox on this page.
*http://www.adobe.com/special/products/flashplayer/fp_distribution3.html

Does the latest flash update work?

You all know the drill. Is it fixed yet???

I am using latest version of flash 11.7.700.202 and it crashes almost immediately,I have all updates I clear my history and I have removed some extensions and plugins and I would like an answer that is truthful. What is wrong!?!??

Why does the latest flash update automatically install Mcafee?

Just wondering why I can't opt out of installing unwanted software when updating flash player?
For reference:
- I turned on my computer and was faced with a regular looking flash player box that stated an update was available.
- I clicked the "update" button and was taken to the following page: https://get3.adobe.com/flashplayer/download/?installer=Flash_Player_13_for_Other_Browsers& os=Windows%207&browser_type=Gecko&browser_dist=Firefox&a=McAfee_Security_Scan_Plus_FireFox _Browser&dualoffer=false&type=au&browser_vers=28 (yes it mentions Mcafee in the address, but only the address. No warning whatsoever on the actual webpage. I wasn't aware that it would automatically install Mcafee without asking).
- I saved the update, then ran it (there were no checkboxes at all to opt out of Mcafee, it just installed it).
Not particularly happy at having unwanted software installed with no real warning, and no opt out available.
Win 7 x64 updating flash to v 13.0.0.182

http://forums.adobe.com/thread/1395219
That one goes back three updates ago, and http://forums.adobe.com/message/4315988 goes back two years...
This has been an ongoing thing. There is an updater that blindly installs McAfee and another that installs Google Chrome and Toolbar. People have been complaining about it for years, and it doesn't change, and it won't change.
I'm not being condescending, and I'm not trying to lecture you on this. I'm just stating the facts. If there had been any intent on anyone's part to do something about it, posts like this wouldn't pop up here every month and a half, like clockwork.
It's the number one reason we post the FULL installer links. Because they have NOTHING IN THEM but the Flash Player plug-in.

Where does HP BIOS flash update tool save old BIOS backup by default

Similar Messages

Maybe you are looking for