Where does iPhone store back up in Windows?

Sorry if this is in wrong place.
Where does the iPhone store the back up in Windows?
Thanks a ton!

XP:
C:\Documents and Settings\USERNAME\Application Data\Apple Computer\MobileSync\Backup
Vista:
C:\Users\USERNAME\AppData\Roaming\MobileSync\Backup
Note that you may have to enable viewing of hidden folders/files.

Similar Messages

Where does iPhone store backups in Mac and Windows?

Sorry I could not find the answer elsewhere.
Where does iPhone store backups on Windows and Mac?
Can the location be changed?
Thanks!

Mac:
Library/Application Support/MobileSync/Backup/
Windows:
C:\Documents and Settings\username\Application Data\Apple Computer\MobileSync\Backup
(Note you may need to turn on show hidden files and folders to see it on Windows)
As far as I know, you can't change it.
Good Luck!
EDIT: Too slow to post :P.

Where does iPhone store contacts?

Hello,
I will be in a different country for a few days and I will buy a SIM card from a different operator over there.
Where does iPhone store contacts? Will my contacts stay on the phone with the new SIM card?
Thank you.

Contacts are stored on the device. The iPhone does not store contacts on the SIM. Make sure you have been backing up the device and syncing your contacts with a supported application on the computer or iCloud or other cloud service. Changing the SIM will not affect your contacts.

When itunes backs up my iphone where does it store contacts

When itunes backs up my iphone where does it store contacts

iTunes places the backup files in the following locations:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start, and then choose Run. Type %appdata% and click OK.
Windows Vista and Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start, and then in the search bar type %appdata% and press the Return key.
But I doubt you can retrieve contacts from there.

Where does iPhone configuration utility store data?

Where does iPhone configuration utility store profiles and other data on the system? I know you can export the individual profiles to back them up, but I would like to just backup the entire iPhone Configuration Utility storage location.

Thanks for the reply. It helped me get more information on where to find it on the Mac. Here's the location for the Mac if anyone else needs the information:
Your home folder > Library > MobileDevice
There are folders in the "MobileDevice" folder that contain data for iPhone Configuration Utility (configuration profiles, device information, etc.)

Where does MAX store channel config such as names, input type, and scalers

Where does MAX store the channel configuration such as the channel names, input type (volts, current, etc), and scaling info?
Unfortunately, our hard drive failed and our Labview back up folder didn't include the MAX channel description/configuration. Our hard drive is currently at a data recovery service and it would be much simpler if we could recover the file instead of re-creating all the channels within MAX. Any help to find the actual location and file name/s would be greatly appreciated.
We are currently using Labview 7.1 on an XP platform that is now freshly installed. Once I complete the install, I plan on making a ghost image of the drive to prevent this from every happening again
Thanks

Thank you for contacting National Instruments.
I believe the information you want is contained in this KnowledgeBase article:
Where Can I Find the Default NI-DAQ Configuration File (niconfig.daq) for Measurement & Automation Explorer (MAX) Under Windows 98/2000/XP?
http://digital.ni.com/public.nsf/websearch/AAB44ACFF1A81F5286256C6C000035CC?OpenDocument
Michael P
National Instruments

Where does the ipad back up stored

where does the ipad back up stored

iTunes places the backup files in these locations:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Note: To quickly access the Application Data folder, click Start > Run. Type %appdata% and click OK.
Windows Vista Windows 7: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, click Start, type %appdata% in the search bar, and press the Return key.
Windows 8: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
Note: To quickly access the AppData folder, move the cursor to the upper-right corner, click the magnifying class, type %appdata%, and press the Return key.

Where does Leopard store my Identity info?

I dunno what's going on, but Mail insists on continuing to use an email account that was closed and deleted last year, and Safari has some other issues relating to my personal info.
I'd like to take back control. Where does Leopard store my identify info?
Thanks.

Thanks, Baltwo. Any idea where I can edit the zip code that the system defaults to (which is no longer correct)? A couple of websites use my zip code to customize my visits. I can't find my zip code in anything related to Safari. I know I entered one when I first set-up the computer. Where can I find that stuff?
Thanks!

FontBook - where does it store font informations?

As I've posted here before, I've been massively frustrated by Leopard's FontBook over and over again... so much so that this afternoon's longish post was deleted by the modgods here (they say "Your post was removed from Apple Discussions as it contained feedback or feature requests" when they mean "You used foul language to describe Apple products"
Anyway, I've now installed Leopard on an external disk with one, and one purpose only: to get exactly the font files that are part of OS X 10.5.
Having done that, I
- deleted everything in /Library/Fonts
- copied all the original Apple system fonts from the external disk
- changed owner group and access data for each font resource to be exactly like the virgin 10.5
- deleted the FontBook pref file in ~/Library/Preferences
- deleted all ATS cache files
- rebooted
Now when I open FontBook, (of course) it still displays all sorts of fonts from before this open-heart surgery operation.
So my questions are:
- where does FontBook store its font informations?
- how does one clear, delete, wipe out, nuke or kill these informations... whatever is necessary to not have Zombie font descriptions lurking in FontBook?
TIA if anyone has an answer to enlighten this murky swamp!

Maybe this is interesting to someone: after my 6th or so cold reboot this morning, and Spotlight having started its ritualistic "Indexing" my external FW harddrives (for the 6th time in 3 days...), my Console is filled with hundreds of this:
23.11.07 02:34:35 com.apple.ATSServer[940] 2007.11.23 02:34:35.85
23.11.07 02:34:35 com.apple.ATSServer[940] A fatal error was detected using fontiD 131127 while processing a message (id: 11) from pid=425.
23.11.07 02:34:35 com.apple.ATSServer[940] Font Info:
23.11.07 02:34:35 com.apple.ATSServer[940] In-memory font for ATS owner 311 -> pid 425.
23.11.07 02:34:35 com.apple.ATSServer[940] FontObject 0x2debd0; ID 131127 ( 0x20037: gen: 2; index: 55 )
23.11.07 02:34:35 com.apple.ATSServer[940] Name:
23.11.07 02:34:35 com.apple.ATSServer[940] No name in cache
23.11.07 02:34:35 com.apple.launchd[1] (com.apple.ATSServer) Throttling respawn: Will start in 10 seconds
23.11.07 02:34:45 com.apple.ATSServer[941] FODBError: FODBRemoveFromAnnex - Got called to remove an annexIndex that does not match what is in the font
23.11.07 02:34:45 com.apple.ATSServer[941] ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Now ATSserver is throttling and re-spawning, seemingly forever.
Since this OS experience can't possibly get much worse -- I guess even Windows would be better at this point -- I'll go and delete all ATS caches (again) as well as FontBook's cache files, and reboot (again).
Oh joy.

Where does Iphoto store ratings, arrangement of photos, events, libraries?

Hi, I currently have Leopard, I was planning on doing a clean install with Snow Leopard soon. Afterwards I plan on restoring Iphoto back to the way it was. I have a 70 gb library and importing my photos, rearranging the events, photos, and libraries would take ages if I had to start from scratch. I have my whole computer backed up using Carbon Copy Cloner. My question is where does Iphoto store the ratings, manual arrangement of photos, events, libraries, etc? Thanks

iPhoto is a relational database program and everything is stored in the iPhoto library - it must be treated as a single entity - it is not possible to isolate components in it - simply drag the iPhoto library intact as a single entity from the clone back to the pictures folder of the main computer
To test prior to doing an erase and install (the Mac does not have a "clean install") you can depress the option key and launch iPhoto and select the backup copy and test it - be sure to do an option launch and paint back to the main library afterwards
LN
LN

Where does OIM store the LDAP Sync URL

Where does OIM store the LDAP URL which was specified when ldap sync is configured? Is it possible to change this URL?
Thanks
Aspi

iTunes places the backup files in the following places:
Mac: ~/Library/Application Support/MobileSync/Backup/
Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
Windows Vista: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\

Where does mail store downloaded photos

Where does mail store downloaded photos?

If I understood you... you can export your entire iPhoto library to an external Hard Drive? I could only see import option...
You're welcome. Yes, that is correct. In iPhoto, File > Export... > Select external drive.
You said your drive has to be specially formatted - is that for if you want to export your photos to that drive? Or do you mean if you wanted the iPhoto library to be located primarily on the hard drive?
I meant the latter > specifically, your external drive would need to be formatted in this manner if you wanted your primary iPhoto library to reside on an external drive and function correctly. This format is the format of your MBP's internal drive.
Format the drive as FAT32 using disk utility to make the drive universally compatible between OSX/windows. Place the JPEG images on the drive. Transfer between machines with no problem.

Where does Firefox store images saved as desktop wallpaper?

Where does Firefox store images saved as desktop wallpaper? i was playing around with windows theme and I can't find the wallpaper that was displayed before.

Firefox saves downloads to wherever you specify. Check your settings in Tools > Options > General, Download section. If you have it set to "Always ask me where to save files", then only you know where they were saved.
See: http://support.mozilla.com/en-US/kb/Options+window+-+General+panel
Also see: http://www.sevenforums.com/tutorials/281-desktop-background-change.html
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)''': your ver. 10.0 r45; current ver. 10.1 r53 ('''important security update 2010-06-10''')
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer.
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
'''You''' ~~red:'''MAY'''~~ '''need to Update Adobe Reader for Firefox''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Start > Program Files, find and click Adobe Reader to open, click Help, click Check for Updates.
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer.
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

Where does portal store the username after a successful log in?

We have an intranet application, we use the portal security and login screen, etc.
I have written a stored procedure which requires two parameters. One of them we already have at the time we need to call it. The other is username. All we need
to know is how to get the username at the time we must call it. Where does portal store the username after a successful log in for the particular session this user is logged into?
I tried using the following syntax,
When i log in using PORTAL30 then it returns,
SQL> select portal30.wwctx_api.get_user()
2 from dual;
PORTAL30.WWCTX_API.GET_USER()
PORTAL30
But when i logged in using some other user i.e.rtemps it returns,
SQL> connect rtemps@mpdb
Enter password: *******
Connected.
SQL> select portal30.wwctx_api.get_user()
2 from dual;
PORTAL30.WWCTX_API.GET_USER()
PUBLIC
Why does it return PUBLIC, instead of RTEMPS?
rtemps is a Database user though.
How do i test this script for portal users?
Also my application is a multiple user application.
So at a given time, there could be more than user logged in, also there could be more than one sessions of the same user logged in.
what happens in that scenario?
Thank you,
Kalpa

still not working..
The first page my user goes to log in, is
http://159.225.218.59/pls/portal30_sso/portal30_sso.draw_custom_login_page
when i look at this stored procedure, it makes a call to the following procedure,
PORTAL30_SSO.wwsso_app_admin.ls_login
and passes a parameter ssousername
From here my user is directed to the home page, which is built using the portlets, the URL for the same is,
http://159.225.218.59/servlet/page?_pageid=255,257&_dad=portal30&_schema=PORTAL30
This is where i want to pass the ssousername, so as to keep track of what the user is doing.
Question 1: where does this page physically reside, or how do i add the parameter ssousername to this page?
I have 1 HTML PORTLET, on this page, and the code behind this looks like,

<%@ page language="PL/SQL" %>
<%@ plsql parameter="i_pagenum" default="1" %>
<body>
<table width = 760>
<tr>
Link 1
</tr>
</table>
In the above code, when they click on link 1, it calls a database stored procedure(rpt_param_prov), which is also a psp page.
In here, i want to pass the parameter ssousername.
e.g. the link should look like,
Link 1
Again this is a HTML portlet, so i don't think it will recognize the psp tags.. so that probably might be another issue.
But this is what i want to accomplish. So i can use the user who logged in, for my audit trail application, which will be inserting a record in a database table, everytime, the user runs reports that are being clicked.. like link 1 in above example.
I don't understand why this is so hard.
When i tried
portal30.WWCTX_API.get_user, it still brings back PUBLIC or PORTAL30_PUBLIC.

Where does Messages store attachments on the iPad?

Where does Messages store attachments on the iPad?
some photos are quite large, so it would be good to know where they go, and how to manage the app.... ;)

Managing memory usage is not possible because the user does not have access to the file structure (unless you have jail broken your iPad that is).

Where does iPhone store back up in Windows?

Similar Messages

Maybe you are looking for