Where does my encoded media go ?...

Maybe a dumb question, but this is first time I am exporting with media encoder in CS4 : once the Start Queue has been pressed, where does the output file goes ? (I have not changed any default, so what's the default ?...)
Thanks,
Rob

You don't need to do that. Just scroll to the right and read the output file location.
Since my answer was correct to begin with, at least give some points for a helpful answer, now that you bypassed the correct one.

Similar Messages

C3-01: Where does music/vid media stored?

Where does music/vid media files are stored when transferred from OVI suite? Does it automatically saved to the memory card or the hardware built memory. How do I save it directly to the memory card?

The first step in the sync process is to create a backup. On a mac this backup is located at
~/Library/Application Support/MobileSync/Backup. The backup does not included iTunes media as it is assumed to be in the iTunes library you are syncing with. Also, as you have discovered, when you first sync with a new iTunes library iTunes will erase all iTunes media on the phone (music, videos, etc.) and replace it with the media in the library you are syncing with. Photos from Camera Roll (which are taken by the phone) are part of the backup. Photos in Photo Library (which were synced to your phone from your computer) are not; again, because it is assumed they are already on your computer as that is how they were synced to your phone in the first place.
What, exactly, is still on your phone at this point?

If you consolidate iMovie media by coping it, where does it go?

I was hopeing to copy my pictures right from my project and put it in a separate folder in the order they are in the project. It sounded like that was possible by "consolidating it via the copy option. I tried but nothing seems to have happen. Where does consolidated media go and how can I get to it?
Also is there anyway to give iMovie more ram to make it work better?

Hi ,
Scenario 1 :If you are having an single exchange environment with your domain name (i.e domain.com) as authoritative in accepted domain list then definitely sender will get the bounce back error message which says "recipient not found".
Scenario 2 : Say for instance you are using your domain (i.e domain.com) as a shared namespace between two different exchange forest.On that time definitely you will not get the bounce back message immediately .Because your message will get looped between
the exchange forest .On certain hop sender will be getting an bounce back message which says that "your message has reached the possible number of hop counts".
Note : On scenario 2 your domain (i.e domain.com) will be on internal relay on both exchange forest.
Please feel free to reply me if you have any queries.
Regards
S.Nithyanandham

Where does firefox cache the form parameters to be used in the reload event of a page that was the resposne of a HTTP POST request?

Suppose there is form in a web page and it submits data in HTTP POST method. After submitting the form, if I reload the page [either by the refresh button or back button; whichever applicable], firefox asks permission to resend the form data by saying "To display this page, Firefox must send information that will repeat any action...". Now if the user clicks on the resend, firefox resubmits the form data.
So where does firefox store this from data for such future resending/resubmission?
Is it possible to retrieve/manipulate those stored form data?

I thought I'd tried that, as tried lots of other things like encoding URL, but obviously not as this works.
Thanks for the quick reply.
We also have an issue with the people results not being able to be refined by Department or Job Title now we have connected the SP2010 farm to use the service applications from a SP2013 farm.
Any ideas on this? I've started a new thread as its unrelated though:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c89d5463-4531-4a28-9586-1f690c7b580d/can-you-refine-people-search-results-using-a-sharepoint-2013-search-service-application-connected-in?forum=sharepointsearch

Where does flex builder keep refererences to the flex projects?

Where does flex builder keep refererences to the flex projects?
I'm getting an error like this on FB3 startup:
The folder PR System Intranet does not exist in the workspace so the reference must be somewhere else.
thanks
!SESSION 2009-11-02 09:47:52.203 -----------------------------------------------
eclipse.buildId=unknown
java.version=1.5.0_11
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_GB
Command-line arguments: -os win32 -ws win32 -arch x86
!ENTRY org.eclipse.core.resources 2 10035 2009-11-02 09:47:53.610
!MESSAGE The workspace exited with unsaved changes in the previous session; refreshing workspace to recover changes.
!ENTRY org.eclipse.core.resources 4 567 2009-11-02 09:47:53.829
!MESSAGE Workspace restored, but some problems occurred.
!SUBENTRY 1 org.eclipse.core.resources 4 567 2009-11-02 09:47:53.829
!MESSAGE Could not read metadata for 'PR System Intranet'.
!STACK 1
org.eclipse.core.internal.resources.ResourceException: The project description file (.project) for 'PR System Intranet' is missing. This file contains important information about the project. The project will not function properly until this file is restored.
at org.eclipse.core.internal.localstore.FileSystemResourceManager.read(FileSystemResourceMan ager.java:663)
at org.eclipse.core.internal.resources.SaveManager.restoreMetaInfo(SaveManager.java:792)
at org.eclipse.core.internal.resources.SaveManager.restoreMetaInfo(SaveManager.java:772)
at org.eclipse.core.internal.resources.SaveManager.restore(SaveManager.java:663)
at org.eclipse.core.internal.resources.SaveManager.startup(SaveManager.java:1319)
at org.eclipse.core.internal.resources.Workspace.startup(Workspace.java:1949)
at org.eclipse.core.internal.resources.Workspace.open(Workspace.java:1713)
at org.eclipse.core.resources.ResourcesPlugin.start(ResourcesPlugin.java:363)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl$2.run(BundleContextImpl.java:9 99)
at java.security.AccessController.doPrivileged(Native Method)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.startActivator(BundleContextIm pl.java:993)
at org.eclipse.osgi.framework.internal.core.BundleContextImpl.start(BundleContextImpl.java:9 74)
at org.eclipse.osgi.framework.internal.core.BundleHost.startWorker(BundleHost.java:346)
at org.eclipse.osgi.framework.internal.core.AbstractBundle.start(AbstractBundle.java:260)
at org.eclipse.osgi.framework.util.SecureAction.start(SecureAction.java:400)
at org.eclipse.core.runtime.internal.adaptor.EclipseLazyStarter.postFindLocalClass(EclipseLa zyStarter.java:111)
at org.eclipse.osgi.baseadaptor.loader.ClasspathManager.findLocalClass(ClasspathManager.java :417)
at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.findLocalClass(DefaultClassLoade r.java:189)
at org.eclipse.osgi.framework.internal.core.BundleLoader.findLocalClass(BundleLoader.java:34 0)
at org.eclipse.osgi.framework.internal.core.SingleSourcePackage.loadClass(SingleSourcePackag e.java:37)
at org.eclipse.osgi.framework.internal.core.BundleLoader.findClassInternal(BundleLoader.java :405)
at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:369)
at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:357)
at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.jav a:83)
at java.lang.ClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClassInternal(Unknown Source)
at com.adobe.flexbuilder.standalone.FlexBuilderApplication.start(FlexBuilderApplication.java :111)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:169)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLau ncher.java:106)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.jav a:76)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:363)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:176)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:508)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:447)
at org.eclipse.equinox.launcher.Main.run(Main.java:1173)
at org.eclipse.equinox.launcher.Main.main(Main.java:1148)
!SUBENTRY 2 org.eclipse.core.resources 4 567 2009-11-02 09:47:53.829
!MESSAGE The project description file (.project) for 'PR System Intranet' is missing. This file contains important information about the project. The project will not function properly until this file is restored.
!ENTRY org.eclipse.osgi 4 0 2009-11-02 09:47:53.860
!MESSAGE An error occurred while automatically activating bundle org.eclipse.core.resources (161).
!STACK 0

Thanks but that file contains things like
<?xml version="1.0" encoding="UTF-8"?>
<actionScriptProperties mainApplicationPath="main.mxml" version="3">
<compiler additionalCompilerArguments="-services "X:\Coldfusion9\wwwroot\WEB-INF\flex\services-config.xml" -locale en_US" copyDependentFiles="true" enableModuleDebug="true" flexSDK="Flex 3.2" generateAccessible="true" htmlExpressInstall="true" htmlGenerate="false" htmlHistoryManagement="true" htmlPlayerVersion="9.0.28" htmlPlayerVersionCheck="true" outputFolderPath="Staff_Ratings-debug" sourceFolderPath="src" strict="true" useApolloConfig="false" verifyDigests="true" warn="true">
<compilerSourcePath>
<compilerSourcePathEntry kind="1" linkType="1" path="H:/flash"/>
</compilerSourcePath>
<libraryPath defaultLinkType="1">
<libraryPathEntry kind="4" path=""/>
</libraryPath>
<sourceAttachmentPath/>
</compiler>
<applications>
<application path="main.mxml"/>
</applications>
<modules/>
<buildCSSFiles/>
</actionScriptProperties>
I don't see how FB3 knows about the
Pr System Intranet
project that seems to be the cause of the errors.

Where does Keynote store the audio files in a presentation

I have slides with individual audio files. When I import or attach the file and then save the presentation, it changes the file name to .mov extension. Where does Keynote store those files? I would like to edit the saved Keynote version, but cannot locate the .mov file!

I'm not exactly sure of what you want to do, and I'm not sure if my answer is the most efficient, or even wholly correct, but here goes ...
When you save a KN presentation (a KN doc) which includes an audio (or movie) file, you can save it 2 (3?) ways: either without or with the file being copied into the document, or as a "package". In a test file I just made with 3 white slides (title, slide with song, second slide with song) the results:
without: 3.8 MB; with: 9.4 MB; package: 9.4 MB. The essential difference, aside from size, is that if saved without, if you play the KN on another machine which doesn't have those audio files on it, the audio won't be there. To make the KN truly portable, you must save with, or as a package. (I'm not too sure of the concept of package in KN. In PP, saving as a package means you end up with a folder, which contains the PP and the media files, each as separate entities. Saving a KN package yields not a folder but a file, which looks to me identical to the result achieved by simply saving with, and seems to behave identically, as well.) The audio file you used will in any case remain where it was before you used it, but, if the KN doc is saved with, or as a package, a copy of it will go into the KN doc.
But then, what do you mean by "edit"? What do you want to edit, the KN presentation, or the audio file within it? If the former, I don't understand where the problem might be. If the latter: using the QT inspector within KN, you can change the length of the audio file (where in the song it starts and stops), whether to start it on click, or automatically after transition, or to loop it. If you wanted to do some other, more exotic audio editing, like reverbs or other effects, I'd do that on (a copy of) the original audio file (found wherever it was before) with another app (GarageBand, for instance), and then I'd replace the first, non-edited, version of the audio file in the KN doc with that.
Have I missed something?
Message edited by gbdoc: maybe someone will chime in to clarify the difference between "saved with" and a "package"

When I transfer photos from my camera to my computer, where does the computer store them?

When I transfer photos from my camera to my computer, where does the computer store them?

Assuming you're using iPhoto 09 or later.
By default the photos are stored in the iPhoto Library in your Pictures Folder.
The iPhoto Library is a Package File. This is simply a folder that looks like a file in the Finder. This is a simple protection from users inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
Want to look inside? Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Standard Warning: Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things,, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
As an FYI: There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

Where does FireFox get the default value of a preference from. What is the format of the file that has the default value?

Where does FireFox get the default value of a preference from. What is the format of the file that has the default value?. I need the actual default value for a particualr preference.
About:config does show some default values but I need the source from which about:config picks up the default value.
Any help in this direction is greatly appreciated.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

The prefs that aren't hidden if they are the default are stored in two JavaScript text files in the Firefox program folder
You can open them via these links in a Firefox tab:
<code>resource:///defaults/pref/firefox.js
resource:///greprefs/all.js
</code>
([/forum/1/702598])

Where does Bridge CS5 store the metadata files?

Where does Bridge CS5 store the metadata files that are created under the Tools menu? I moved CS5 from one drive to another on my Mac Pro and lost all of them. I'd like to recover them is possible.

Yikes!
genenphoto wrote:
…I moved CS5 from one drive to another on my Mac Pro…
First of all, all Adobe applications really need to be installed and reside permanently on your boot volume, i.e. the same volume where your OS resides. There will be endless grief if you install the applications elsewhere.
Secondly, I hope by "moved" you mean that you deactivated CS5 and then used the Adobe Uninstaller to uninstall CS5, then re-installed CS5 from the original media, from scratch, and not just drag-copied the Application folder. And hopefully there's an OS installation on that other drive that will allow you to boot off that drive.
Third, you need to refer to your preferences in Bridge as you set them to find out whether you were keeping the cache in distributed folders or were using the central database, whether you were using separate xmp sidecar files, whether you had Export Cache to Distributed Folders set in Bridge preferences, etc..
Wo Tai Lao Le
我太老了

After ripping a CD, where does the file go?

After I insert a CD into the drive and click "import music" from the CD diretly into iTunes, where does the actual file go on my computer?
I use windows XP.
If I rip a cd in windows media player or something else, the actual file goes to My Music folder, where does the file go when I do it in iTunes?
HELP!

Thanks for the help, but that folder only contains music i purchased and downloaded from iTunes, it doesn't include music a import from CDs using iTunes.
Can anyone help?

Where Does A Switch Go In the Network?

I've maxed out the ethernet jacks on my Airport Extreme Base Station (gigabit), and I have a gigabit switch to introduce to the network, but I'm not sure where it should go. Here is my current setup:
Cable Modem ->
AEBS ->
(1) Apple TV (wireless);
(2) MacBook Pro 10.5.2 (wireless);
(3) Vonage Adapter (wired ethernet);
(4) Tivo HD (wired ethernet);
(5) Slingbox (wired ethernet);
(6) USB hub ->
(7) external HD "A";
(8) external HD "B"; and (soon)
(9) external HD "C."
Apple TV connects to the iTunes library on the MacBook Pro, which in turn finds the media files on external HD "A." MacBook Pro runs Backup to backup external HD "A" to external HD "B." MacBook Pro backs itself up via Time Machine to a separate external HD that is directly connected to the MBP, but eventually the Time Machine drive will be external HD "C," hanging on the AEBS.
All of this works more or less fine right now, but for logistical reasons, I'd like to put the Apple TV in a cabinet. I know the wireless signal will be difficult in the cabinet, so I'd rather have the Apple TV plugged in to the AEBS via ethernet cable. (The Apple TV streams Apple Lossless music beautifully in this arrangement, but there is a hiccup once every great while that plugging in would hopefully avoid.) That's where the need for the switch comes in immediately, but I'd also like the flexibility to connect other/future devices to the network via ethernet cable.
So, where does the switch go, before or after the AEBS? And having answered that, can you tell me which device handles DHCP (or do they both and if so, how does that work?)? Also, how do I setup port forwarding (Vonage, BitTorrent, etc.) with this new arrangement? What other things will I have to adjust or be mindful of?
Many thanks in advance to those willing to help me out with this.

So, where does the switch go, before or after the AEBS?
You'll want to connect the Ethernet switch "after" the AEBS.
And having answered that, can you tell me which device handles DHCP (or do they both and if so, how does that work?)?
The AEBS will handle DHCP service. Ethernet switches/hubs, typically, do not have this capability.
Also, how do I setup port forwarding (Vonage, BitTorrent, etc.) with this new arrangement?
The following is a typical port forwarding scenario ...
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): <enter the appropriate UDP port values>
o Public TCP Port(s): <enter the appropriate TCP port values>
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
o Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

Where does iMovie put my clips?

this is my first go at imovie, and i was wondering, when it imports my clips from a miniDV tape, where does it store the clips on my HD? i want to be able to burn raw-un-edited DV files to archive as original DV rips off of the tape, but i cant find the files.
the main problem is that i imported about 4 miniDV tapes (all recorded at extended play: EP) and i only used a few clips to make my movie, i've moved on from that project and deleted it, but i need the rest of the clips that weren't used in that project. i assumed that the clips are stored somewhere on my harddrive, but when i did a search for ".dv", "clip", "clip 1", "clip 2" etc. and "movie" i the finder didnt come up with anything.
i really need to get to those unused clips because the miniDVs have been carelessly recorded over. when i was working on a PC i know XP would jus import the moviez az WMVs and place them in "My movies" and i could just acess them from there, but for some reason i cant find my DV clips anywhere on the harddrive.
i've already deleted the first project i was working on because i thought it'd just delete the project, not the DV clips also.
can anyone help me find the "un-used" clips? do they still exist? if they dont, where would i find future clips that are imported in imovie?
i'm running imovieHD6.xxx

ok, so that means when i import from my miniDV cam, osx imports the files into a /media folder which is hidden? is there anyway i can access the folder manually?
i mentioned before that i imported every miniDV tape i had during a single project (so that i could have access and preview all my miniDVs w/o having to keep switching through tapes all the time and also determine a time line and seperate "dvds" for seperate events), then used the only a few of the clips i had to make one movie then transcoded it to DVD and then i deleted the project thinking that the other unused clips would still be there (somewhere on the harddrive) since i just deleted the project file.
from my understanding now is that the clips still exist after i've deleted the project file; is that correct? or did osx delete all files associated with my video project when i deleted project file?
not that i dont want to recapture my miniDVs but one or more of the tapes have been overwritten. since i thought i had already captured them onto my imac.
i guess my biggest question would be how would i get to that /media folder??? and are my other imported clips gone?
and once again.. yes.. i've unfortunately empty'd my trash...
thanks for your responses QuickTimeKirk and Matti

How does adobe encoder work with windows 8? I can't get it to work.

How does adobe encoder work with windows 8? I cant get it to work.

Flash Media Live Encoder doesn't work with Windows 8.
The best it gets is Windows 7 64 bit.

My PrE 11 App Crashes during DVD Burn at ~72% thru Encoding Media - image renderer dll

This error occurs consistently with a project I just started. Project was initially created under PrE 2 then Copied via Archive and continued under Pre 11. I'm a new user and I need some of your expert help to resolve this. Windows 7 event viewer signature is as follows: Hope you can help me with this I've spent 2 days working this so far.
oops - don't know how to insert text (.doc) file here. Will add in later post. Thanks for your interest.

Reporting progress this AM:
Windows updates are installed and current in both HP (Win 7 64) and Dell (XP 32). It appears anti-virus does not have any involvement in either case. Last set of trials had Norton on and active and had predictable outcomes (more later). Based on this mornings test cases it could be that Win 7 PrE 11 64 bit DVD Burn process (Sysinternals has PrE burn.exe running at 32 bits) is more sensitve to bad scene clips than the Win XP PrE 11 32 bit DVD Burn process.
Test cases performed today...Methodology -- since my detailed examination of the Project timeline did not turn up any answers I proceeded with a set of Tests to remove major scenes from the offending project stating from the END and working forward performing a project save and PrE restart after each scene removal.
Test case A - removed last scene, reduced timeline total from 01:00:18:00 h to 00:58:00:16. The resulting autoplay DVD burn on HP Appcrashed at 74% thru 'Encoding Media'. Last result prior to this was Appcrash at 71%. I then tested this Project case A against the Dell autoplay DVD burn which was good as expected.
Test case B - also removed the next to last scene, reduced timeline total to 00:54:07:28. The resulting autoplay DVD burn on HP Appcrashed at 80% thru 'Encoding Media'. Spotting a trend, I calculated the offending timeline event to be approximately 00:42:45:27 to 00:43:20:15. Going to this point in the Project timeline I once more looked for any artifacts or gaps. Finding none I also removed the continuous sub-scene starting at 00:42:45:26 ending at 00:43:45:08.
Test Case C - Removing the sub-scene along with last 2 scenes reduced the Project total timeline to 00:53:13:18. The resulting autoplay DVD Burn on HP Appcrashed this time at 82% thru "Encoding Media'. So...examining the total timeline scene at around 00:43:00:00 I find 13 more sub-scenes that are derived from a set of old 8mm film conversions to .avi files. The sub-scenes are moderately adjusted for lightness and color and are a little out of sequence from the original .avi files. So lets remove them all.
Test Case D1 - Removing the last 2 scenes and the 4th scene from last, reduced the Project total timeline to 00:50:42:00. The resulting autoplay DVD Burn on HP was successful! I then prepared a Travel-Menu-based DVD Burn on the HP with 3 scene markers and it also was successful. So I believe the Project may be OK under HP Win 7 64 PrE 11 by removing or perhaps re-editing the 4th from last Scene. To test this conclusion I will add the last 2 scenes back into the Project and try a Menu-Based Burn on both the HP and Dell platforms. I believe it will work .. will report back.
This conclusion does not explain the root cause(s) for the ProblemSignature 'Image Renderer dll Appcrash' but may establish a workaround for this project. For the 4 Test cases iterated here I used the referenced Process Explorer Sysinternals to look into potential process conflicts. After Test Case B the Sysinternals was used to examine the 'Adobe Premiere DVD burn.exe' thread (TID 4948, CPU 0.05). Message reads " Dbghelp.dll Configured does not support the Microsoft Symbol Server. Please download & install the Microsoft Debugging Tools for Windows to get a version that works." This action is way beyond my experience level. I will await overwatch input and continue with workaround analysis.
Apologies for tedious details...but, making progress. Thanks for listening & guidance. rdub

Where does blackberry torch stores the current wallpaper image?

Where does blackberry torch stores the current wallpaper image?

In Media > Pictures > Specific Folder Name as per Theme name.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Where does my encoded media go ?...

Similar Messages

Maybe you are looking for