Where does my sim contacts get stored ?? Am not able to view them

I tried importing my sim contacts but still am
Not able to find my sim contacts

You should be able to import contacts from a SIM that was used by a different phone. Settings>Mail, Contacts, Calendar>Import SIM contacts.
Best of luck.

Similar Messages

Where does a new contact get stored when Exchange and iCloud are configured?

I have Contact (and mail and calendar) configured for iCloud and Exchange. When I add a new contact, how do I determin where it is stored?
When I click Add (via the + or Command N) I get
Which account will hold the new contact?
Thank you

You should be able to switch between three different views at the bottom of Contacts (three buttons next to each other below your contacts list) - the leftmost button should show all your accounts and groups next to your list of contacts and you can then simply drag & drop contacts into an account or group :-)

Where does an abap program get stored after save?

Where does an abap program get stored after save? ...plzz tell
Edited by: Alvaro Tejada Galindo on Feb 18, 2008 11:28 AM

this program download the code to presentation server
Analyse this code.
CHECK IT IN DEBUGGING
REPORT zdownload_source MESSAGE-ID zabap.
TABLES: trdir.
SELECT-OPTIONS: repo FOR trdir-name.
PARAMETERS: path(60) TYPE c DEFAULT 'C:\programs\'.
DATA: BEGIN OF tabsource OCCURS 10,
 source(72) TYPE c,
 END OF tabsource.
DATA: BEGIN OF tabtext OCCURS 50,
 tab LIKE textpool ,
 END OF tabtext.
DATA: BEGIN OF tabrdir OCCURS 100,
 rdir LIKE trdir,
 END OF tabrdir.
DATA: filename LIKE rlgrap-filename,
 mode TYPE c VALUE ' ',
 rdirrows TYPE i,
 sourcerows TYPE i,
 rc TYPE i,
 length TYPE i.
FIELD-SYMBOLS: .
DATA: ok TYPE i VALUE 0,
 fail TYPE i VALUE 1.
AT SELECTION-SCREEN.
DATA: i TYPE i.
DESCRIBE TABLE repo LINES i.
IF i <= 0.
 SET CURSOR FIELD repo.
 MESSAGE i001 WITH 'se message class'.
ENDIF.
START-OF-SELECTION.
CONDENSE path NO-GAPS.
length = strlen( path ).
SUBTRACT 1 FROM length.
ASSIGN path+length(1) TO .
IF <> '\'.
 ADD 1 TO length.
 ASSIGN path+length TO .
 = '\'.
ENDIF.
SELECT * FROM trdir
 INTO TABLE tabrdir
 WHERE name IN repo.
DESCRIBE TABLE tabrdir LINES rdirrows.
CHECK rdirrows > 0.
LOOP AT tabrdir.
 MOVE tabrdir TO trdir.
 PERFORM download_sourse USING rc.
 CHECK rc = ok.
* PERFORM download_textpool USING rc.
ENDLOOP.
write :/ sy-dbcnt , ' number of programs downloaded'.
*& Form download_sourse
* text
* -->P_RC text
FORM download_sourse USING rc.
rc = fail.
CLEAR: tabsource, filename.
REFRESH: tabsource.
READ REPORT trdir-name INTO tabsource.
DESCRIBE TABLE tabsource LINES sourcerows.
CHECK sourcerows > 0.
CALL FUNCTION 'STRING_CONCATENATE_3'
 EXPORTING
 string1 = PATH
 string2 = TRDIR-NAME
 string3 = '.ABA'
 IMPORTING
 string = FILENAME
 EXCEPTIONS
 too_small = 1
* OTHERS = 2
IF sy-subrc <> 0.
WRITE: 'AAAA'.
ENDIF.
CONDENSE filename NO-GAPS.
PERFORM download TABLES tabsource USING filename rc.
ENDFORM. " download_sourse
*& Form download_textpool
* text
* -->P_RC text
FORM download_textpool USING p_rc.
rc = fail.
CLEAR: tabtext, filename.
REFRESH: tabtext.
READ TEXTPOOL trdir-name INTO tabtext LANGUAGE sy-langu.
DESCRIBE TABLE tabtext LINES sourcerows.
CHECK sourcerows > 0.
CALL FUNCTION 'STRING_CONCATENATE_3'
 EXPORTING
 string1 = path
 string2 = trdir-name
 string3 = '.TXT'
 IMPORTING
 string = filename
 EXCEPTIONS
 too_small = 1
* OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM download TABLES tabtext USING filename rc.
ENDFORM. " download_textpool
*& Form download
* text
* -->P_TABTEXT text
* -->P_FILENAME text
* -->P_RC text
FORM download TABLES tabtext
 USING filename
 rc.
rc = fail.
CALL FUNCTION 'WS_DOWNLOAD'
 EXPORTING
* BIN_FILESIZE = ' '
* CODEPAGE = ' '
 FILENAME = filename
 FILETYPE = 'ASC'
 MODE = 'MODE'
* WK1_N_FORMAT = ' '
* WK1_N_SIZE = ' '
* WK1_T_FORMAT = ' '
* WK1_T_SIZE = ' '
* COL_SELECT = ' '
* COL_SELECTMASK = ' '
* NO_AUTH_CHECK = ' '
* IMPORTING
* FILELENGTH =
 TABLES
 data_tab = TABTEXT
* FIELDNAMES =
* EXCEPTIONS
* FILE_OPEN_ERROR = 1
* FILE_WRITE_ERROR = 2
* INVALID_FILESIZE = 3
* INVALID_TYPE = 4
* NO_BATCH = 5
* UNKNOWN_ERROR = 6
* INVALID_TABLE_WIDTH = 7
* GUI_REFUSE_FILETRANSFER = 8
* CUSTOMER_ERROR = 9
* OTHERS = 10
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc <> 0.
 WRITE: / sy-subrc, ' message declare '.
ENDIF.
rc = sy-subrc.
ENDFORM. " download
regards.
santhosh reddy
<REMOVED BY MODERATOR>
Edited by: Santhosh Reddy on Feb 13, 2008 6:48 PM
Edited by: Alvaro Tejada Galindo on Feb 18, 2008 12:00 PM

Where does the buffer data gets stored in bw 3.5 bps?

Hi all,
Is there any standard tables, where in i can look for the buffer data. And how to delete nor refresh the buffer data in bw 3.5 bps?
Can anyone let me know the significance of buffer in bps 3.5?
Thanks
Pooja

Hi,
I think Data in the buffer is not stored temporarily in any specific table,once it is saved it will be as transaction data of the cube or the master data.
The place where data is stored in buffer is called planning buffer and All changes to the data are written to planning buffer.So you don't have to save continuously.If the data is not already in the buffer, the system reads it either from:
The database table (Customizing objects), or Info cube (Plan Data)
and writes it to the planning buffer.
You can use the given function module to delete the buffer data:'UPF_METHOD_DESTROY'
Regards,
Indu

Where does iPhone store contacts?

Hello,
I will be in a different country for a few days and I will buy a SIM card from a different operator over there.
Where does iPhone store contacts? Will my contacts stay on the phone with the new SIM card?
Thank you.

Contacts are stored on the device. The iPhone does not store contacts on the SIM. Make sure you have been backing up the device and syncing your contacts with a supported application on the computer or iCloud or other cloud service. Changing the SIM will not affect your contacts.

Where does substitution variable meta data stored?

where does substitution variable meta data stored in the essbase folder? Thanks Arun

I believe substitution variables are stored in the Essbase.sec (Security file).

Where does the supporting deatil is stored? in Planning or Essbase?

Where does the supporting deatil is stored? in Planning database (RDMS) or Essbase database?
Appreciate if u could reply ASAP.
Thanks in Advance!!

Supporting details are stored in Planning Applications RDBMS. check out HSP_COLUMN_DETAIL and HSP_COLUMN_DETAIL_ITEM in the application relational database
Re: Refresh Database
I can see 6 question and all are unresolved, Mark the answers if you think they are correct or helped you and close the thread.
Cheers..!!
Edited by: RahulS on Jun 21, 2011 3:58 PM

Where does the ACS server get the DNS info for IP pools?

I am trying to change the DNS servers that my VPN users are assigned from the IP pools on the ACS server. Where does the IP pools get the DNS server information. I have changed the DNS Ips on the windows server and rebooted. But the VPN clients are still being assigned the old DNS servers.

ACS ip pools do not push DNS server information
It is either being forwarded from VPN concentrator group setup or
it is being send from ACS user/group setup > Radius(VPN 3000) attributes > [026/3076/005] Primary-DNS.
Hope this helps.
Regards
Rohit

Where does airdrop use contact details from?

Where does airdrop use contact details from?

When you attempt to turn on AirDrop from your iPhone, one of the options is "Contacts Only". I think your question is that when this appears, which device supplies the contact details?
The answer is that your iPhone (the device you are turning AirDrop on from) supplies the contact details.

I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them.

I am trying to sync my itunes with my ipod, but when I get to step 3 of syncing, it stops. Also, I deleted all the songs on my ipod, and when I go to my music in my ipod the songs are all still there and in a grey color and I'm not able to select them. How do I completely clear my ipod music, and how can I solve the syncing problem?

Sync works the same way it always has, connect the device, select the content desired to sync and sync.
All the media should be in iTunes already, iDevices are not and have never been backup devices.
If this is a new computer, move the content from the old computer to the new computer.

HT1338 when I click on a website where there is a pdf to view, I am all of a sudden not able to view. Please adivse

when I click on a website where there is a pdf to view, I am all of a sudden not able to view. Please adivse

Linked from https://support.mozilla.org/en-US/questions/976863
Hi Anita,
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

I installed new OS to my IPhone 4 and now phone gets hangs and not able to type or chat .. how to resolve it now

i installed new OS to my IPhone 4 and now phone gets hangs and not able to type or chat .. how to resolve it now

Try a reset to begin with. hold down the Sleep and Home key until Apple logo appears on the screen.
Regards,
Steve

I received a massage to upgrade carrier, after upgradtion I am not able to view the APN setting which earlier was showing. Please advice how to resolve the problem as I am not able to use internet on my mobile with my data sim.

Hi,
I am using Qtel data sim at Doha - Qatar. I have receive a message to upgrade your carrier which I did.
Unfortunetly after upgradtion I am not able to view and edit the Cellular data setting & APN setting.
Please help me out as I am not able to access internet.

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

Where does the svc system get its infos from?

The longer I work with Solaris 10, the more I dread this awful "services" construction and its unwieldy administration.
I have a newly setup machine with two zones, one created right after the other, meaning they should be identical.
/usr is, as usual, lofs'ed into both zones, and contains a /usr/local/samba dir with a handcompiled 3.0.30 release.
I have not created any manifests as I intended to simply delete the 'onboard' samba service and start the new version
via the classical init script.
I boot both zones.. and one starts "/usr/local/samba/smbd -D -f /etc/smb.conf", and the other starts (or tries to) "/usr/sfw/sbin/smbd -D".
I inspected the manifest xmls for the network/samba service, and in both zones the entry lists /usr/sfw as start method.
svccfg listprop network/samba also reports /usr/sfw for both zones.
Where did the one zone get the info to start the /usr/local samba installation, and where did it get the (correct) conf file parameter?
Why does svccfg report a different startup method property than it really runs on svcadm enable?
I have grepped through all of /lib/svc, /etc/svc and /var/svc and nowhere is any reference to the /usr/local file nor the conf parameters.
Swapping the svc repository.db file between both zones also swaps the problem around - so it must be somewhere in there,
but as it's no longer a human readable file, I'm out of luck there. How did the /usr/local path and parameters get into that DB file?
Does the service system search the filesystem for known daemon binary names and other guesswork? And if it does such voodoo,
why didn't it do the same in the other identical zone?
rant Did we really need to get this svc "feature"? Until now I have seen no advantage from it, and only incurred a huge load of inconvenience,
be it the additional work of creating manifests for new services or debugging problems that I never had in a decade or two of init script usage.
We have all seen for many years how well this registry/service stuff worked on Windows..*/rant*

>
I boot both zones.. and one starts "/usr/local/samba/smbd -D -f /etc/smb.conf", and the other starts (or tries to) "/usr/sfw/sbin/smbd -D".
I inspected the manifest xmls for the network/samba service, and in both zones the entry lists /usr/sfw as start method.I take it you mean the full path with /usr/sfw in it, not "/usr/sfw" all by itself....
What do you get for:
svcprop -p start/exec network/samba:defaultThat should display the start string it uses.
Where did the one zone get the info to start the /usr/local samba installation, and where did it get the (correct) conf file parameter?I can only assume that some program inserted that string into the service. As you said, it's not in the manifest, so it didn't come from there.
Why does svccfg report a different startup method property than it really runs on svcadm enable?
I have grepped through all of /lib/svc, /etc/svc and /var/svc and nowhere is any reference to the /usr/local file nor the conf parameters.
Swapping the svc repository.db file between both zones also swaps the problem around - so it must be somewhere in there,
but as it's no longer a human readable file, I'm out of luck there. How did the /usr/local path and parameters get into that DB file?
Does the service system search the filesystem for known daemon binary names and other guesswork? And if it does such voodoo,
why didn't it do the same in the other identical zone?
rant Did we really need to get this svc "feature"? Until now I have seen no advantage from it, and only incurred a huge load of inconvenience,
be it the additional work of creating manifests for new services or debugging problems that I never had in a decade or two of init script usage.As with many such things, the advangages are greater when the environment is more complex. For starting a single job, you won't see the benefits as much.
Of course, the milestone services still run startup scripts out of /etc/rc[S23].d, so those are perfectly valid places to run a startup script.
Darren

Contacts get stored with different names

Hi,
I have had this problem for a while now, i even got a new Q10 and still problem exists. whenever i store a new contact with a new name it gets stored but the display name is something totally different it will choose one of my existing contacts first name and last name and will store the new contact as such.
yet when i search for my new contact with the given name i stored it with it finds it and yet displays the made up name it did.
for example
I already have contacts
John Smith,
Paul Adam,
Anthony Connery
and I want to save a new contact of Jennifer tyler.
the Q10 after pressing save with give me her name to be something like Paul Adam.
when searching for jenn
it will give me all the jennifers including paul adam
when searching for paul adam it will give me 2 contacts and one of them with jennifer tyler's contact details.
I CANT KEEP UP and i stopped storing numbers it is very annoying and i cant remember who is who
PLEASE HELP

here is a video to demostrate
http://www.youtube.com/watch?v=SweXyd3UGF8
and it happens to any number saved and ten it saves it to any name on my contacts

Where does my sim contacts get stored ?? Am not able to view them

Similar Messages

Maybe you are looking for