Where does my win7 partition go?

Hello all,
I've used my MBP since 2011, I use auch both win7 and mac OS.
I've my snowleopard upgrated to OS X 10.9.1 later. The both systems work good.
Last week i tried to upgrade my win7 OS, because this one is not actived since it has been installed.
The system needs to restart, then i restart the machine. That's the time i got the problem.
Whenn the OS restarts, i press the option key to switch to Win7, but I got just EFI boot. After choosing the item, the screen stay for 30 minute with a symbel, it's indicates that the OS works failed, then the machine is power off.
I'm using the driversutilities under Mac OS to check the information of my drivers, find out that the size of the driver is right(320GB), but the partition(60GB) for win7 is totally gone. which means the partiton is invisable right now for Mac OS..
Can anybody tell me, what's going on here? How can I find back my losting Win7 partition or how can I find the driverspace of Win7.
Any inputs will be appreciated!
Jian

Jian,
in the Finder, press Command-Shift-U to bring up the Utilities folder; run Terminal there. In the Terminal window, give it the following commands, one per line, ending each line by pressing the Return key:
diskutil list
diskutil cs list
mount
Please include in your reply the full output from these commands.

Similar Messages

Where Does Yosemite Installer Hide? (aka missing disk space)

I've been using a 400GB partition on an external drive for Time Machine backups for some time and it's had plenty of room to work with. I upgraded to Yosemite recently and all was well with the Time Machine backups.
Yesterday I downloaded Yosemite again to install it on a second drive so that I would have a second bootable drive. Today I got notice that there was not enough space on my Time Machine backup drive. Suddenly the 400GB was not enough and my primary boot drive had swollen to 480GB. I don't know what it had been, but obviously there is now a lot more on it than there was.
My assumption is that I have the Yosemite Installer and/or hidden installer files that didn't get cleaned up after the second installation. I can't find anything in hidden files or folders that I recognize as such but soemthing is eating up lots of disk space that I need to free.
Where does the App Store stash downloads in case that's it?
If I hold Option on a restart, I no longer have the Installer as an optional boot disk, but I do get three "Recovery-10"... disks. Possibly those are the problem, but I can't locate them either.
Any ideas would be appreciated.

Ok, I may have found a possible solution. I found this at stack exchange. It's not the best option and it requires a simple shell command, and will not be able to be used to restore from Time Machine, but for backing up one or more directory, at least in the short term, this will work. Here it is:
There seems to be an issue with Yosemite renaming the computer local host by adding (#) after the computer name. There are other reports of this happening in a thread on MacRumors Forum and I believe a few people have blamed this as a cause of time machine backup failures. I've tried a few of the suggestions in the thread but so far none have worked. I've stopped using time machine for now and reverted to an old bash rsync script.
A really simple solution is to open the terminal and type:
rsync -avu ~/ /Volumes/backup_disk/backup_folder
replacing 'backup_disk' with the name of your external hard drive and 'backup_folder' with the name of the backup folder i.e.: 'yosemite_backup'. The three flags -avu mean: archive (a) copy the home directory recursively into sub folders, verbose (v) print to the terminal window everything you are copying (feel free to leave this out) and update (u) will only overwrite files that are newer than the archived file (useful after the initial main backup). This solution isn't as hands off as time machine but at least it's a simple way to back up vital information in Documents and Pictures/Videos.
Hope this helps!
to read the full discussion go to http://apple.stackexchange.com/questions/151662/os-x-yosemite-time-machine-ident ity-of-the-backup-disk-has-changed

When u import a cd, where does it go ? i need to put on external hard drive

when u inmport a cd, where does itunes actually put it ? c:\ hard drive ? or where my music is located, on external k:\

It will put it where ever it is you've told iTunes to put your music. What do you see if you look under Preferences>Advanced?

Where does one set space after paragraph in the new Pages 5.0? It used to be under text in the Inspector in the previous version, but I just can't find it in this new version.

Where does one set space after paragraph in the new Pages 5.0? It used to be under text in the Inspector in the previous version, but I just can't find it in this new version. Paragraphs seem to only be dealt with in styles, and the Formatting window for text doesn't seem to have the space after paragraph contrtol that the older Inspector had. What am I missing?

Sorry I did this without looking:
Side panel >Text > Style > Spacing > Turn the triangle > Before Paragraph/After Paragraph/
This is the trouble with the Peeky Boo Contextual Interface that so many wiser heads than mine love to love.
Peter

Where does firefox cache the form parameters to be used in the reload event of a page that was the resposne of a HTTP POST request?

Suppose there is form in a web page and it submits data in HTTP POST method. After submitting the form, if I reload the page [either by the refresh button or back button; whichever applicable], firefox asks permission to resend the form data by saying "To display this page, Firefox must send information that will repeat any action...". Now if the user clicks on the resend, firefox resubmits the form data.
So where does firefox store this from data for such future resending/resubmission?
Is it possible to retrieve/manipulate those stored form data?

I thought I'd tried that, as tried lots of other things like encoding URL, but obviously not as this works.
Thanks for the quick reply.
We also have an issue with the people results not being able to be refined by Department or Job Title now we have connected the SP2010 farm to use the service applications from a SP2013 farm.
Any ideas on this? I've started a new thread as its unrelated though:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c89d5463-4531-4a28-9586-1f690c7b580d/can-you-refine-people-search-results-using-a-sharepoint-2013-search-service-application-connected-in?forum=sharepointsearch

Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running google maps app on the phone. Siri cannot seem to get me to a specific address. Where does the problem lie? Thanks.

Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running Google Maps app on the phone. SIRI cannot seem to get me to a specific address. Where does the problem lie? Also can anyone tell me the hierarchy of use between the Apple Maps, SIRI, and Google maps when the app is on the phone? How do you choose one over the other as the default map usage? Or better still how do you suppress SIRI from using the Apple maps app when requesting a "go to"?
I have placed an address location into the CONTACTS list and when I ask SIRI to "take me there" it found a TOTALLY different location in the metro area with the same street name. I have included the address, the quadrant, (NE) and the ZIP code into the CONTACTS list. As it turns out, no amount of canceling the trip or relocating the address in the CONTACTS list line would prevent SIRI from taking me to this bogus location. FINALLY I typed in Northeast for NE in the CONTACTS list (NE being the accepted method of defining the USPS location quadrant) , canceled the current map route and it finally found the correct address. This problem would normally not demand such a response from me to have it fixed but the address is one of a hospital in the center of town and this hospital HAS a branch location in a similar part of town (NOT the original address SIRI was trying to take me to). This screw up could be dangerous if not catastrophic to someone who was looking for a hospital location fast and did not know of these two similar locations. After all the whole POINT of directions is not just whimsical pasttime or convenience. In a pinch people need to rely on this function. OR, are my expectations set too high?
How does the iPhone select between one app or the other (Apple Maps or Gppgle Maps) as it relates to SIRI finding and showing a map route?
Why does SIRI return an address that is NOT the correct address nor is the returned location in the requested ZIP code?
Is there a known bug in the CONTACTS list that demands the USPS quadrant ID be spelled out, as opposed to abreviated, to permit SIRI to do its routing?
Thanks for any clarification on these matters.

siri will only use apple maps, this cannot be changed. you could try google voice in the google app.

In Forms 10g Where does SQLs execute?

In Oracle Forms 10g there is Java Applet on top of which our Application runs. Now suppose we have a button and in that we execute a SQL to get a column value.
Now where does the SQL fire?
Does it fire in the Applet (i.e in client) or does it go to the App Server and then execute?

RTM first!
If it's PL/SQL written in the form, that executes on the application server, that has a PL/SQL engine.
If it's a call to a procedure stored in the database, that executes in the database.
If it's SQL, then that can execute nowhere else except in the database.
Do not imagine that the applet does any other thing except rendering what you see on screen and handling the clicks and keystroke to the application server (which does the further processing, handling to the database the SQL that has to be executed).
Briefly, that's the basics.
HTH
Edited by: BEDE on Nov 16, 2010 11:15 AM

When i exit, mozilla will prompt me a message asked if i would like to save my tabs(i have 13 tabs opened). may i ask, where does all those 13 tabs (web addresses/links) stored in mozilla, or in which file that i can locate in mozilla's folder? I need a s

I have a problem with my bookmarks, cookies, history or settings
Description
When i exit, mozilla will prompt me a message asked if i would like to save my tabs(i have 13 tabs opened).
may i ask, where does all those 13 tabs (web addresses/links) stored in mozilla, or in which file that i can locate in mozilla's folder? I need a solution that i can find/copy down that 13 web addresses without needed to open mozilla browser.
YOUR ATTENTION TO ABOVE MATTER IS VERY MUCH APPRECIATED!
PLEASE HELP!
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729)

Please see '''sessionstore.js''' in your Firefox profile directory, the location of which is described in the [[Profiles]] knowledge base article. This file can be viewed in a readable format using the [https://addons.mozilla.org/en-US/firefox/addon/10869/ JSONView] add-on.

Where does one post ......

Where does one post to a higher echelon a suggestion for new feature or product

Click here and choose a category.
(48478)

HT3078 When I opened up my Apple Wireless Mouse to replace the batteries, there was a metallic "strip" inside. I have no idea how it goes back in and it isn't shown in the instructions here. Where does it go?

I have an Apple Wireless Mouse (model A1015 EMC No. 1938).
I metal "strip" fell out. I can not figure out how to put the strip back in.
Leaving it out, the mouse doesn't work (no light, no nothing).
Does the strip actually belong and if so, where does it go?
I went to the Apple site and looked up how to replace the batteries and started off saying to turn off the mouse. I have no idea how to turn off the mouse. It also did not show a metal strip on the inside.
When I opened the mouse, the battery cover popped off. Without the metal strip, the cover does not pop off and is very hard to remove.
HELP!!!

See: https://discussions.apple.com/message/1958068#1958068

Importing audio from CD-where does it go?

I tried importing audio from a cd tonight for the first time, from within the audio window. Where does the file go? After I quit the song and tried to open again, the file could not be found. I tried importing again. When I put the CD in iTunes opened up and somehow renamed the CD "John Ford Radio"!? Anyway, I figured out that once the file was in the audio window I used the "move" function to copy the file to the song folder.
Is there an easier way to do this?

If you import audio from a CD, it stays on the CD. You probably saw a message something like "Insufficient privileges" which means that the OS recognised that it couldn't write the calculated wave overview back to the CD.
The best method is to copy it to your hard disk and check the Ownerships and Permissions within the Finder info. You need to have Read/Write on any audio file.
Finally, when saving your work, always use Save as Project since that will create a single folder with all your files nicely tucked away.
Pete

Hi, I have a Power Book G4 Tiger 10.4.11 and my problem concerns iTunes 9.2.1(5). I have changed my Apple ID and password recently. Since that, I am told when I try to buy something in iTunes Store that my "session has expired". Where does this come from?

Hi, I have a Power Book G4 Tiger 10.4.11 and my problem concerns iTunes 9.2.1(5). I have changed my Apple ID and password recently. Since that, I am told, only when I try to buy something in iTunes Store, that my "session has expired". Where does this come from? What should I do to solve this problem ? I would greatly appreciate your help. Thank you in advance.

Hi, I am khonthaï. I solved the problem thanks to JHdeVilliers's post on 4 Dec. 2011: I removed all cookies in Safari and it worked immediately !!!

Where does Messages store attachments on the iPad?

Where does Messages store attachments on the iPad?
some photos are quite large, so it would be good to know where they go, and how to manage the app.... ;)

Managing memory usage is not possible because the user does not have access to the file structure (unless you have jail broken your iPad that is).

Where does iPhone store backups in Mac and Windows?

Sorry I could not find the answer elsewhere.
Where does iPhone store backups on Windows and Mac?
Can the location be changed?
Thanks!

Mac:
Library/Application Support/MobileSync/Backup/
Windows:
C:\Documents and Settings\username\Application Data\Apple Computer\MobileSync\Backup
(Note you may need to turn on show hidden files and folders to see it on Windows)
As far as I know, you can't change it.
Good Luck!
EDIT: Too slow to post :P.

I made a Keynote slide show completely on my iPhone. Then I "saved to iTunes", but I cannot find it. Where does it go? Can anybody help?

I made a Keynote Slide show completely on my iPhone.....300 slides. Turned out great! However, I went to "save it to iTunes"....but I cannot find it. Where does it go? I can't figure it out.....thanks!

Dock your phone....locate it on the left in iTunes....hit the 'Apps' tab on the right, then scroll down to the 'File Sharing' section below...

Where does my win7 partition go?

Similar Messages

Maybe you are looking for