Where does NI hide the full list of bug fixes? and why is it hidden from users?

So I get an enticing email begging me to try the august 2009 release of LabVIEW. Ok. I'm twitching with anticipation. I'd like to know if several specific bugs are fixed in a new release of a specific module, however. Otherwise I'd prefer to install it some other time when I'm not busy writing dlls to compensate for the bugs that I hope are now fixed. I've been clicking in circles on the NI website trying to find complete information regarding changes and as is entirely far too typical of NI, I only have access to an anemic, watered down version of what should be proper documentation.
"LabVIEW Readme—Use this file to learn
important last-minute information about LabVIEW, including installation
and upgrade issues, compatibility issues, a partial list of bugs fixed
in the current version of LabVIEW... bla bla bla"
Where is the full list of bug fixes? I don't care if it isn't spellchecked or if it's sloppy; I just want the information. The readme you provide for the specific module I'm interested in is ridiculously small. I know darned well you must have changed more than what is listed. So what secret vault do I have to burgle to find the full list of bug fixes? Am I just missing an obvious hyperlink?
- mushroomed
Message Edited by Root Canal on 08-11-2009 11:29 AM
global variables make robots angry

Root Canal wrote:
Where is the full list of bug fixes? ...
They are locked-up in the Ivory Tower.
I have been a LabVIEW Champion for about four years and even after signing NDA's I still can't see the full list.
Seruously, the full list includes probably millions of bugs that NI finds internally before you and I ever see it.
The best way to handle your situation is to track the CAR's for your bugs. You can call NI support with the CAR number and they can tell you if the bug was fixed and in which version you will find the fix.
If it has not been fixed you can contact you rlocal NI rep and ask them to look into it for you. They may be able to tell you in which release the fix is scheduled and bump up the priority of the fix if you make a good arguement.
Just trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

  • Where does Safari store the full list of sites visited?

    I have just started using Safari on my computer and noticed that it pulls down an immense list of site suggestions as soon as I start typing an URL. On closer inspection, these are all sites that I have visited in the past, with other browsers (IE and Mozilla/ Firefox).
    Where did Safari go to get this information?
    I usually set my browsers to auto erase of history, cookies, etc., so I wasn't aware that these records were being stored in my computer - and I sure would like to know where exactly.
    Thanks in advance to anyone who may be able to shed some light on this.

    Hi
    I think the autofill information comes from your bookmarks (if you have cleared the history)

  • Where can I get the full list of features and details of v28

    Where can I get the full list of features and details of v28, I searched alot but could not find the official list of features.

    try this:
    http://helpx.adobe.com/digital-publishing-suite/help/whats-new-release.html

  • Who selected the default list of product forums, and why?

    I am struck by the odd list of product forums listed at the entry point to the new forums (http://forums.adobe.com/index.jspa). There are one-click icons that jump to the Flash Player, Acrobat, Flash, Photoshop Elements, Dreamweaver, Livecycle, Photoshop, Adobe Reader, ColdFusion, Flex, Acrobat Connect Pro, and Lightroom forums. I can understand the massively popular products like Flash, Adobe Reader, and Photoshop, but Livecycle, ColdFusion, and Acrobat Connect Pro? Why are those niche products elevated to such prominence, while flagship Adobe products like InDesign and Illustrator are buried in a drop-down menu? I wonder if these were just random selections by the web design team, or if they reflect a corporate emphasis on "new media" products over print design.
    If it is just a random selection of Adobe products, is there a way I can create my own jump list, or will I always have to dig through a labyrinth to find the forums that interest me most?

    Brutus_Maximus wrote:
    If it is just a random selection of Adobe products, is there a way I can create my own jump list, or will I always have to dig through a labyrinth to find the forums that interest me most?
    Your guess is as good as mine.  One thing is clear; if they are only listing 10 products, a bunch of people will be upset regardless of which they choose.
    On finding forums; I suggest using bookmarks.  Drag your favs to your browsers toolbar for quick access.  Thats a lot faster than popping back to a webpage for an index.
    Or; the History menu near the top of the forum is helpful to keep track of the last 3 forums you were on.

  • Where oh where does it hide the captured footage?

    Despite all manuals telling you to keep all files tidy and have a good filing system to make things easy to find, some people (i.e. me) tend to get a little excited on installation and completely miss where the captured files are stored.
    I now cannot find them anywhere! Could you tell me where they are stored and how you change this?

    Hi Becki,
    you'll need to read more about *System Settings* and how to properly set your scratch disk paths.
    It is all in the manual.
    For the time being if you can at least see the clips in FCP browser then *control click* over the clip and choose *reveal in finder*. FCP will immediately locate the folder where your media is and you will be able to find the paths.
    Also go to the website below to read some very useful tutorials:
    http://www.kenstone.net/fcphomepage/fcp_homepageindex.html
    G.

  • How to hide the URL path on click of an link to URL element,from user

    Hi All,
          I have an link to URL element, on click of the link it opens the specified url in a new window. But in new window the user is able to see the entire URL path. I want to hide this path from the user. Can any one please suggest me how to do it.
    Regards,
    lakshmi.

    hi,
    just check this help
    http://help.sap.com/saphelp_nwce10/helpdata/en/f7/f289c67c759a41b570890c62a03519/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/7d/fdc99ab37a8d42892e0d39bbd23be8/frameset.htm
    Link to URL Question

  • Where does Front Row get its list of Videos?

    Where does Front Row get its list of Videos? And how do I purge this list? Front Row is listing Videos that no longer exist on my computer and when selected do nothing.
    I tried by trashing my prefs, but the same missing files are still in the list.

    ok, worked on it a little bit more... the only thing left was an entry in the library file, when you opened the xml file in safari you could find the entry. I didn't dare playing around with the file itself, but found a script called: "super remove dead tracks" on this website, which does the trick: http://dougscripts.com/itunes/scripts/scripts01.php?page=1#removedeadsuper
    it worked great, nothing is showing up in front row any.

  • Where does one find the product serial number?

    Where does one find the product serial number to enter and get a "Generate a response code" to finalize the license if the computer has no internet access?  I went to "Help>System Info" entered that number and it came up short of numbers.

    Find your serial number quickly

  • Where can I find a full list of the Logic Pro X Software Instruments?

    Where can I find a full list of the Logic Pro X Software Instruments (the ones you can play with a MIDI keyboard)?  From what I've read so far, there are a number of new software instruments in the LPX additional content (as well as loops, etc, but I'm looking for the software instruments).  I cannot seem to find this information in the product pages or documentation, though.
    With older versions, I was able to find a list of all of the software instruments that came with the software, and all of the software instruments that came with the Jam Packs.  Is that list available from Apple, or does anyone have one from somewhere else?

    Hi Guys,
    I exported my folders from a clean LPX install, does this give you what you want?
    First one is the Patch instruments:
    http://www.supportat.net/forumfiles/LPX_PatchInstruments.txt
    This one is the sampler Instruments:
    http://www.supportat.net/forumfiles/LPX_SamplerInstruments.txt
    This is all the files:
    http://www.supportat.net/forumfiles/LPX_AllFolders.txt

  • From where does exachk reads the list of stoage nodes that should be checked ?

    exachk automatic tries to check a storage node thats closed. From where does exachk reads the list of stoage nodes that should be checked ?

    Great! you found it and thanks for sharing the location. 
    Did you find it thought script or Google? 

  • Where can I find the full installer for Premiere 7.2.2?

    Anybody know where I can find the full installer for Premiere 7.2.2? As detailed here, we can't get any of our CC apps to update, either via AAM, or by downloading and running the patch files. The "direct download link" provided by one of the commenters in the thread doesn't actually work; I get a "you do not have permission to access the file" message.
    I would like to uninstall Premiere and reinstall the most up-to-date version of it.

    This might help.
    AAM doesn't update to Creative Cloud desktop Application
    Available updates not listed
    Creative Cloud Update fails due to DynamicLinkManager 

  • Where can I find a full list of FRM Errors for forms 9i?

    Where can I find a full list of FRM Errors for Forms 9i?
    I have installed Forms 9i + the documentation CD but it has very little documentation on forms, just lots of J2EE stuff.

    Look in the Forms - Builder help. There you find a lot about Forms - Error.

  • Where can I find the filename list for iOS image Default.png ?

    I have a really hard time finding where information is scattered on Adobe. Does anyone know the definitive list of supported Default image filename for iOS publishing?
    Here is what I was using previously to support up to iPhone5 in portrait orientation:
    Default.png
    [email protected]
    [email protected]
    Default-Portrait.png
    [email protected]
    I'd like to add iPhone 6 and 6+
    thanks

    Up until now, I would include these images for a landscape only app:
    [email protected]
    Default-Landscape.png
    [email protected]
    Default.png
    [email protected]
    The Default-Landscape.png would appear on non Retina iPad, and would be correct whichever way you held the device. Likewise [email protected] would do the same for Retina iPad.
    According to your article, Default-Landscape@2x doesn't exist any more, and Default-Landscape is now specifically for Landscape Left.
    Is this correct, or can we continue to only have Default-Landscape & Default-Landscape@2x?
    My guess/hope is that the article is wrong, and that there is both a Default-Landscape@2x still, and a Default-LandscapeLeft, and that Default-Landscape is not specifically for Landscape Left.

  • Where do I find a full list of Skype calling rates?

    I can only find a country dropdown but I will need a full one page rate card with all countries displayed at the same time. Where do I find a full list of Skype calling rates?

    kozo wrote:
    Where do I find a full list of Skype calling rates?
    Hello and welcome to the Skype Community.
    Unfortunately a full list isn't available any more. It was withdrawn some time ago as it's viewing volume was very low.

  • Where does iWeb save the contents of my website now that iDisk is not available?

    With the latest change to iCloud and iDisk not available anymore, where does iWeb save the contents of websites?
    I looked for the files undel Library/Application Support/....but could not find the iWeb folder.
    Any ideas please?
    Thank you.

    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

Maybe you are looking for

  • How to stop email notifications

    I share reminders with my wife and every time she changes something in her shared calendar, I get an email notification.  How do I stop them?

  • ColumnSeries fill color change fails

    Hi, I have a chart with column series that are populated dataprovider and for which the color is set in a separate CSS file. My software allows to dynamically change the CSS (compiled as SWF) and apply the changes. problem: - the first time the chart

  • Disabling computer account in Active Directory will still allows the workstation to login

    I have a special scenario. A Widows 7 workstation was in lock mode (waiting for CTRL+ALT+DEL). As an administrator, I disabled the computer account, user account and even reset the password for that user and the workstation. My requirement is that th

  • Clicking Add Page button deletes data from initial page.

    I have an Add Page button on the first page. I enter information into my first page. When I click the Add Page button, a new page (page 2) is added but the information I have inputted into the first page disappears. I have attached the form that I am

  • P2 Panasonic log and transfer, FCS refuses to see....

    hi, this is driving me crazy...I have looked all over the web, and all tutorials seem straight forward, and I have followed them, but my FCS refuses to see the P2 files. I open Log and Transfer and they don't show up. Well they did, the first 2 times