Where does one return the usb adapter replacement
I have the box with me and do not know where I should return it.
http://www.apple.com/support/usbadapter/exchangeprogram/
Mine was delivered by Fedex, with instructions inside to call DHL to pick it up for the return. Well, I don't have DHL service in my area. After calling Applecare 4 different times in one day and spending I don't know how much time on hold, I finally talked to a human, who's expert solution was for me to take it to the post office!!!!! I explained that it had a prepaid DHL sticker on it, he said he didn't know why the Post office wouldn't honor that, or maybe I should call Fedex to come pick it back up, they would probably honor the DHL sticker too? I suggested that I would be near an Apple Store the next weekend and could take it there myself, he put me on hold for another 25-30 mins to check with someone to see if this could work. When he finally came back, he was pretty sure it would, if not they could just have DHL pick it up from them, since they use them anyway. This should not be this hard. I was sold a defective product, give me my better improved product and a simple way to get rid of the one that is going to kill me and my family without me having to make 4 phone calls, be given no real solutions to my problem, and in the end I have to come up with the answer myself.....Wonderful customer service.....
Similar Messages
-
HT4356 Where does one find the passphrase to connect a air printer to an i-pad?
where does one find the passphrase to connect an air printer to an i-pad?
I believe you are suppose to supply the code. Make sure you remember the code.
-
Where does one find the product serial number?
Where does one find the product serial number to enter and get a "Generate a response code" to finalize the license if the computer has no internet access? I went to "Help>System Info" entered that number and it came up short of numbers.
Find your serial number quickly
-
Where does one find the Oracle Best Practice/recommendations for how to DR
What is the Oracle Best Practice for install/deployment and configuration of ODI 11g for Disaster Recovery?
We have a project that is using Oracle ODI 11g (11.1.1.5).
We have configured all the other Oracle FMW components as per the Oracle DR EDG guides. Basically using the Host ip name/aliasing concept to ‘trick’ the secondary site into thinking
it is primary and continue working with minimal (or no) manual reconfiguration. But will this work for ODI? The FMW DR guide has sections for SOA, WebCenter and IdM, but nothing for ODI.
Since ODI stores so much configuration information in the Master Repository..when this DB gets ‘data guarded’ to the secondary site and promoted to Primary…ODI will still think it is at the ‘other’ site. Will this break the actual agents running the scenarios?
Where does one find the Oracle Best Practice/recommendations for how to DR ODI properly?
We are looking for a solution that will allow a graceful switchover/failover with minimal manual re-configuration.user8804554 wrote:
Hi all,
I m currently testing external components with Windows Server and I want to test Oracle 11g R2.
The only resource I have is this website and the only binaries seem to be for Linux OS.You have one other HUGE resource that, while it won't answer your current question, you'd better start getting familiar with if you are going to use Oracle. That is the complete and official documentation, found at tahiti.oracle.com
>
Does anybody know how I can upgrade my Oracle 11.1.0.7 version to the R2 release?
Thanks,
Bertrand -
Where does one find the Very Useful tool, Magic Wand, in the latest version of Photoshop, anyone? Its been well hidden. Why change for change's sake?
csuebele wrote:
I guess I'm too slow, Trevor.
That's no bad thing Chuck. It indicates that you have better things to do than constantly refresh the forum LOL.
I'm having a wee posting spree today after lacking the inclination to respond to the same old threads for the last few days. But I do love it when people get all in a tizzy complaining about stuff that is right under their nose (so to speak). So I guess my criteria for responding is often based as much on how big a smile it puts on my face, as to how much I am helping the OP. Unfortunately that irreverent approach gets me into trouble at times, and one of the moderators deleted one of my illustrated replies just a few days ago. It took me a few minutes to work out why it had been deleted. The subtext was 'risking one eye', and I eventually realized that the implied 'risk' could definitely be seen as offensive to some people. -
Where does one get the request code in order to register online?
If you have a redemption code you can redeem it here to get the serial number:
https://redeem.licenses.adobe.com/getserial -
Where does one find the "file browser" option in V10 like the one in V2?
Where does one find the "file browser" option in V10 like the one in V2
The file browser was more or less the precursor to bridge in photoshop elements 1,2 and 3 and photoshop 7 and cs, except it was built into the actual application instead of being separate like bridge.
The file browser was not an organizer as such, which was also along side the file browser in photoshop elements 3 on windows.
some info on the file browser in photoshop cs:
http://www.computer-darkroom.com/ps8_browser/fb_1.htm
Message was edited by: R_Kelly -
Where does one get the latest CS4 Patch?
I installed CS4 but don't know where the latest patches are? Where can one go to find out about those and download them?
Thank you.
I have the EX1. I just found out CS3 has a patch which makes it X.D CAM EX compatible. Given the fact Cineform will not yet work with CS4, I still wonder whether it isn't too soon to jump into CS4. CS3 has the advantage of being tested, it was designed for XP (which is what I'm using) and it is compatible with Cineform right now. On the other hand CS4 is the future. Which way would you go? -
Wher does one see the setting for the ABAp debugger
Do you know where one can see if the debugger is set to update debugging?
Hi,
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the <b>ABAP Debugger, you check Update Debugging under Settings</b> and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
http://www.sapdevelopment.co.uk/tips/debug/debug_backjob.htm
Regards
Sudheer -
Where does one find the WPA-key for their airport express?
I'm trying to have a Playstation 3 access my airport express network. It sees the network but when I get to the security settings (which is WPA-2) it asks for my WPA key. I don't know where to find that. I went into my computer's keychain utility to find it, but I am rather lost there. Any help?
I now am able to log on, thanks. I typed this in earlier and it said that it was an invalid key. Not sure what settings were doing things before. Thanks alot. However, I'm having another problem.
Since I got my airport express I have been having trouble logging onto certain sites that I use to with just the cable modem. The progress bar in Safari goes about half way and then stops. Firefox browser does the same thing on the same sites. It is only a just a couple sites like Yahoo home page for emails. When I tried to log into the Playstation Network, the same thing happened, it won't access it and then times out. My OS version is 10.6.8 if that helps. -
Where does one find the type of MBP
I just bought the latest MBP 15" and I'm thinking of getting Apple Care for it. I see listing such as "MB588LL/A". Where can I find if this is the model number that I have and if not, where would I look?
I don't see any of this type of description anywhere in "About this mac".Any AppleCare enrollment number for PowerBook or MacBook Pro will work for the MacBook Pro. The oldest boxes only say PowerBook. Slightly newer ones will say PowerBook/MacBook Pro, and the newest ones will say MacBook Pro. Any of them will work as long as the enrollment number hasn't been used yet.
Same story for the MacBook and MacBook Air. The oldest boxes will say iBook, the newer ones will say iBook/MacBook, and the newest ones say MacBook/MacBook Air. Even the iBook enrollment numbers will work for the MacBook Air.
If you have a 13" MBP you'll want this product - http://store.apple.com/us/product/MC246LL/A
If you have a 15" or 17" MBP you'll want this product - http://store.apple.com/us/product/MC247LL/A -
Web Widgets - Where does one get the required extensions?
Hello all,
I'm wondering where one would find the required extensions to
implement various JavaScript libraries into "Web Widgets" as per
the video:
http://tv.adobe.com/#vi+f1500v1434
Cheers,http://www.adobe.com/cfusion/exchange/index.cfm?s=5&from=1&o=desc&cat=290&l=-1&event=produ ctHome&exc=3
Ken Ford
Adobe Community Expert Dreamweaver/ColdFusion
Adobe Certified Expert - Dreamweaver CS3
Adobe Certified Expert - ColdFusion 8
Fordwebs, LLC
http://www.fordwebs.com
"nX07" <[email protected]> wrote in message
news:gdguuj$lil$[email protected]..
> Hello all,
>
> I'm wondering where one would find the required
extensions to implement
> various JavaScript libraries into "Web Widgets" as per
the video:
>
http://tv.adobe.com/#vi+f1500v1434
>
> Cheers, -
Where does one change the default formatting for a URL (href)
I want to have change the appearance of my href="#" tags so that they are not blue and underlined
Want to do that with a CSS
Do not know where to find and change the default setting in DW CS5 so that I make the changes globally
Could I have different styles of href="#"?
In the property list under what name is it in?
Thanks
erikBest practice would be to create an external style sheet and link to it in the <head> like this:
<link rel="stylesheet" media="all" type="text/css" href="style_sheets/main_styles.css" />
of course edit for your folder structure and file names.
But you could test various styles by placing them in the <head> directly, like this:
<style type="text/css">
<!--
a:link {
color:#ffffff;
text-decoration: none;
a:visited {
color:#ffffff;
text-decoration: none;
a:active {
color:#ffffff;
text-decoration: none;
a:link:hover {
color:#ffffff;
text-decoration: none;
a.home:link {
color:#0099FF;
text-decoration: none;
a.home:visited {
color:#0099FF;
text-decoration: none;
a.home:hover {
color:#0099FF;
text-decoration: none;
a.home:active {
color:#0099FF;
text-decoration: none;
-->
</style>
More info on how to include CSS:
http://www.w3schools.com/css/css_howto.asp
Best wishes,
Adninjastrator -
Hello,
I'd like to run some of the forms samples on technet, but I don't seem to have the jar file containing oracle.forms.[ui/pjc/...]. Does anyone know here I can find it?
Thanks
Eric Kamradt
[email protected]Hi,
Check out the "download" link at the following address.
http://cougaar.org/cgi-bin/viewcvs.cgi/jars/lib/jbcl.jar?cvsroot=core
Hope that help,
Jack -
Hello evi one .. My iphone 3gs is not charging and is not recognised by itunes .whenever i attach my iphone to my computer,it displays a message 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it ' . :-( it do charging sometime with charger but does'nt by computer . kindly please tell me the solution .. thanks
As I said above, some of the new lightning cables have been known to be causing problems for some users. Have it replaced if at all possible by bringing it into your local Apple Store's Genius Bar.
B-rock
Maybe you are looking for
-
Data Federator targetSchema. TableName hanging after deployment
Data Sources: DB2, AS400, Oracle 9i, Oracle 8i, Flat File EIM Tools: Data Federator 3.0 SP1 FP1. Data Services 3.0 I am using Data federator to connect to and integrate the data sources via 1 target table. The mapping rules and target table validatio
-
Can Bootcamp and Parallels share the same Windows applications and data?
I'm looking at getting an Intel iMac which will let me throw away my old PC - Yeah! I will have a couple of Win apps that I will need to hang on to (Quicken - Quicken for Mac is horrible, but that's another tghread). Anyway, can Bootcamp and Parallel
-
Help!! I am new to Java and just don't know enough to complete my project!!
Hi, I need help! Below is listed my code for a bar code scanning project that my company has asked me to write. I want to read a barcode, make sure that it is not already in my file, if not in file write to file(this part works - the write to file),
-
I have a WRT4G router that was reset yesterday. I enabled WPA security and am getting BSODs on ALL computers connected to the network. I have about 7 to 10 computers connected at once. DHCP is enabled. The BSOD messages are different each time an
-
BAM - Nor results on the bam weppage
Hello everyone, Dose anybody know why there is no results to show on the BAM-Portal. I don't get any error or exceptions in the application log. Even the Tutorial 4: Business Activity Monitoring, there were no error messages during the implementation