Where does Premiere Elements 8 store files?

I recently bought a new computer and installed Elements 8 on it. I was in the middle of a video project in 7 on my old computer, had a project folder on my D drive with what I thought contained all my photos and captured video. I moved that folder to my new computer and have been able to link up my photos but cannot find the video clips. I went back to my old computer in the the organizer the frames were there with the clip names but it couldn't link to the actual video clip anymore. I've searched everywhere I know, but can't locate them I 've seen the PREV folder but need to find I guess the project folder. I sure don't want to have to recapture all the footage again if at all possible. Any answers to where Elements stores the video?? Lesson learned, don't upgrade / change computers in mid-project. Thanks

I didn't think PRE does anything with the source video. It stores project details in and under the folder you select when you create a new project. These project files tell PRE what to do with the clips but does not affect the clips themselves.
To see where the source clips are just hold the cursor over a clip in the Organize tab and up it pops with the path details.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Similar Messages

Where Does XFinity to go store files on android?

Does anyone know where xfinity to go stores files on an android device?

curiousgh wrote:
Does anyone know where xfinity to go stores files on an android device?It is storred on the internal memory and you cannot change that nor can you copy the file to a different location/device.

Does premiere elements 13 support canon mov files?

Does Premiere Elements support Canon mov files or must I convert the mov file to a different format first? If I have to convert the mov file first, what file conversion program should I use and what file type should I convert it to?

Howard Scheer
Thanks for the additional very helpful information.
Two concerns in your case...
1. Canon 70D and its H.264 intra frame compression. Please refer to the following
current thread on the color fade of the exports of the Canon 70D footage
export quality
2. Premiere Elements 10 on a computer with a NVIDIA GeForce video card/graphics card
is bad news. The typical fix is to roll back the driver version to about May 2013. But, when the
computer operating system is Windows 8 or 8.1 64 bit, often there is not an older enough driver
version to revert to in order to get Premiere Elements 10 to display and work properly.
http://www.atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
Also see Announcement at top of this forum about the Premiere Elements 10/NVIDIA GeForce issue.
You should not expect to run into this problem in Premiere Elements 13. But, go tryout before purchase
to assure the compatibility of the program with your computer environment and project goals.
Please review and consider and then we can discuss your situation further.
Thank you.
ATR

Premiere Elements 9: .AVI file - no sound

I am using Premiere Elements 9, video files imported using the import function in Adobe Organizer from an Insignia NS-DV1080P digital video camera. File format is .AVI.
The videos play fine from the organizer and other video players, however when I edit the files with Premiere Elements 9 the audio is all but lost. There is an audio track in Premiere but the sound is so quiet as to be nearly gone. Increasing the audio using the volume controls makes no difference. Video is also very jumpy.
I have used different presets, but have not found any difference between the various settings.
System info:
Windows 7 Home Premium 64 bit
AMD 2.60 Ghz Processor
6GB RAM
Has anyone come across this problem, or do you have any idea how to fix it?

Welcome to the forum.
AVI is but a wrapper, and can contain a lot of different "stuff," both Audio and Video. This ARTICLE will give you some background, and some tips on finding out what is inside the AVI files.
Some cameras also record a mono signal, and this can often lead to very low dB levels in PrE/PrPro. Often, just doing either a Fill Right, or Fill Left will get the levels up to adequate. In some cases, one would need to duplicate the mono file and align it with the original. I would Pan one Left and one Right. The mix-down will be 2-channel anyway.
Also, you can increase the Gain of the Clips, by Rt-clicking and choosing Audio Gain. Just Click-drag on the 0.0 to increase.
There are other possibilities, but where you seem to be observing this in your workflow, I feel that they are unlikely candidates. We can address them, should the above not help out.
Good luck,
Hunt

Where is photoshop elements 11 catalog files stored in windows 7 for carbonite to back up?

Where is photoshop elements 11 catalog files stored in windows 7 for carbonite to back up? Also any other files besides the pictures that I should back up?

[email protected] wrote:
Where is photoshop elements 11 catalog files stored in windows 7 for carbonite to back up? Also any other files besides the pictures that I should back up?
Very important : your catalog does not contain your pictures. They are where you have imported them in your computer. If they are all under a master folder like 'My Pictures' or 'Pictures', you should set your backup software to backup those folders.
The catalog itself is mainly a database keeping all the information about your pictures : location, keywords, ratings, albums...
It's a folder containing the dababase and several other components. You find its location looking in the help section, system info.
The integrated backup / restore process in Elements saves both your media files and the catalog.
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Backing_up_your

Does Photoshop Elements support raw files from the Panasonic GH3 camera?

Does Photoshop Elements support raw files from the Panasonic GH3 camera?

Yes, if you have PSE 11 (not the mac app store version). You will need to go to Help>Updates in the editor to update ACR to 7.3.

Does Premiere Elements 10 have to be permanently connected to Internet in order to work?*

Does Premiere Elements 10 have to be permanently connected to Internet in order to work?

As Steve points out, there are several modules in PrE, that need to be Activated, when first used. That Activation is usually totally seamless and transparent to the user. For those initial Activations, one does need to be connected to the Internet, but once all of those modules have been Activated, the only use for an Internet connection will be to Update the program, but that function can be done manually, by downloading any Updates with another computer, with an Internet connection, then just Copying that/those Update(s), Extracting any ZIP/7Z files, and installing them.
Good luck,
Hunt

Why does premiere elements 8 say I need the right 'codec' when trying to open hdd video?

Why does premiere elements 8 say I need the right 'codec' when trying to open hdd video? where can I find this codec?

hey, I'm not sure if I've set it up for hard drive video. When I
try to import it says it's the wrong codec. I had a similar problem with windows moviemaker.
except the error message there (moviemaker) said 'too many methods firing from events'
hmmm. I don't know what it all means. I have an hdd sony digital handycam.
dcr-sr45 is the model. any suggestions?

Does premiere elements support analog video

I have DVD's of analog videos burned from a 8mm Camcorder recorded in UDF format. Does Premiere Elements support analog video for editing?

theodorepost
Thanks for what sounds like good news.
I see no need for you to convert those VTS_01_1.VOB files into anything else.
Here is my suggested plan...
a. Download and install the free 30 day tryout of Premiere Elements 12 from Adobe
b. Put your DVD disc in the DVD burner tray. Open Premiere Elements 12 to the Expert workspace.
Click on File Menu/New/Export and set the project preset for NTSC DV Standard or Widescreen (depending on whether
your files are for standard 4:3 or widescreen 16:9)...do not forget the check mark next to "Force Selected Project Setting on
This Project".
c. Then back in the Expert workspace, use Add Media/"DVD Camera or Computer Drive"/Video Importer. In the Video Importer,
put a check mark next to your VTS_01_1.VOB, a check mark next to Add to Timeline, and designate at Save In location. Then click
Get Media to put the file in Project Assets and on the Timeline.
d. Then we can gauge the situation.
Again, if possible, do not purchase the program until you have work through the tryout in order determine if Premiere Elements 12 work for your video editing/export goals and is compatible with your computer environment.
We will be watching for further developments.
ATR
Add On...If any problems (I do not expect any) with Add Media/DVD Camera or Computer Drive), we might consider Add Media/Files and Folders/ and navigate to the VTS_01_1.VOB.

Where does WL keep my Java files that it creates from JSPs?

Hi,
I'm using WL 9.2.2 on Solaris 9 (JDK 1.5). When WL builds a JSP page, it presumably converts those JSP pages to Java files before compiling them. Where does it keep those Java files? I'm having a hard time figuring out where my NullPointerException is occurring ...
java.lang.NullPointerException
at jsp_servlet._jsp._groups.__addgroup._jspService(__addgroup.java:810)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.ServletStubImpl.onAddToMapException(ServletStubImpl.java:394)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:309)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:525)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:261)
at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1085)
at org.apache.struts.action.RequestProcessor.processForwardConfig(RequestProcessor.java:398)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:241)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at com.myco.nps.im.plugin.NPSIMIntercepter.forwardRequestDirect(NPSIMIntercepter.java:852)
at com.myco.nps.im.plugin.NPSIMIntercepter.doFilter(NPSIMIntercepter.java:193)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3229)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2002)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1908)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1362)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Thanks, - Dave

It deletes them by default. If you want to preserve them, set the "keepgenerated" and "working-dir" (this one so you don't have to hunt for them) elements in the "jsp-descriptor" element in the weblogic.xml file.
[http://e-docs.bea.com/wls/docs103/webapp/weblogic_xml.html#wp1038491]

Does Premiere elements 10 support MOV movie clip formats?

Does premiere elements 10 support MOV movie clip formats?

MOV is really but a wrapper, and can contain a broad range of CODEC's. Many, like PhotoJPEG, Animation, H.264, and many more will work fine, so long as one has Apple's QT Player installed, or the necessary CODEC's installed. However, if the file came from a Mac, and went to a PC, and had been Exported from FCP, or similar, there could well be one of the Apple Intermediate CODEC's inside, and most of those are NOT available on the PC. Also, if the file came from FCP, even if going to a Mac, there are CODEC's, that will only come from FCP, so one would need that program installed.
This ARTICLE will give you more detail on File Formats as "wrappers."
Please let us now what is inside that MOV wrapper, and someone can direct you.
Welcome to the forum, and good luck,
Hunt

Does Premiere Elements 13 have SmartSound? I can't find the button anywhere...

Does Premiere Elements 13 have SmartSound? I can't find the button anywhere. I am using Classroom in a Book Premiere Elements 11 to learn it as there isn't a CIB for PE13, so I know it's not ideal, but by looking up help PE13 mentions SmartSound but I still can't find it under my 'audio' panel.

nic22
No.
There is no SmartSound feature in Premiere Elements 12/12.1 and 13/13.1. In those versions, you have Music Score under the Audio Tab in the workspaces.
Music Score is the same in concept as SmartSound (you can change music duration without altering the music arrangement), but is not SmartSound.
There are several places in the Premiere Elements 13 Help PDF where information is correct for other versions but not Premiere Elements 13.
Using video tutorials and books written for versions different than your own can get confusing. The principles tend to stay the same from version to version, but features
tend to get moved, deleted, changed from version to version. And, often the video tutorial does not
make a point of what version of the program is being used to demo the tutorial - assumption "same".
As a guide, if you are watching a video tutorial and the headers read
Quick and Expert - that is 11.
Quick , Guided, and Expert - that is 12.
eLive, Quick, Guided, Expert - that is 13. (but note, some users in Europe do not have eLive).
Please review the above. If any questions or need clarification, please ask.
Thank you.
ATR

Where does iPhone configuration utility store data?

Where does iPhone configuration utility store profiles and other data on the system? I know you can export the individual profiles to back them up, but I would like to just backup the entire iPhone Configuration Utility storage location.

Thanks for the reply. It helped me get more information on where to find it on the Mac. Here's the location for the Mac if anyone else needs the information:
Your home folder > Library > MobileDevice
There are folders in the "MobileDevice" folder that contain data for iPhone Configuration Utility (configuration profiles, device information, etc.)

Does Premiere Elements use a "rate curve" for pan/zoom?

Does Premiere Elements pan/zoom feature have a sort of accelerate/decelerate option, either user-selectable, or built in to the pan/zooms?
By accelerate/decelerate, I mean the pan/zoom will start very slowly, then over a period of just a second or two, accelerate to whatever constant speed it needs to move the user-defined distance in the user-defined time, and then at the end of the pan/zoom, decelerate over the last second or two, to a stop.
Makes the pan/zoom seem much more "human/organic"...as opposed to, "robot-like" if the pan/zoom does not gently accelerate/decelerate at the start and end.
Thanks...
Bill

Bill NM Aerial Photos
If you are referring to Bezier Curves and interpolation methods, yes with regard to keyframing the Motion Scale property (for Zoom) and the Motion Position property (for Pan). The Pan and Zoom Tool keyframes can also be adjusted. Keyframing of some other properties can also be adjusted.
From Premiere Elements 13/13.1 on Windows 7 or 8.1 64 bit.
Below is an example from keyframing of the Crop property.
What version of Premiere Elements do you presently have and on what computer operating system is it running? If you do not already
have Premiere Elements 13/13.1, please evaluate the tryout before purchase to determine the compatibility of the program with your
computer environment and video editing goals.
Please let me know if I have targeted your question. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Where does Plan Version field store in SAP project system table?

Hi,
I would like to know where where does Plan Version field store in SAP project system table.
The plan version that I m refering is the Plan Version 1 in the menupath u201COn the Project Info System: Progress Analysis: Initial Screen, Choose Settings > Value display > Plan versionsu201D.
T-Code: CNE5
Thanks.

hi,
try table TKA09
regards

Where does Premiere Elements 8 store files?

Similar Messages

Maybe you are looking for