Where does the CS5 Automatic Update put temporary files?

I am getting the same error that I see other people have had. When I try to download and install CS5 updates using the automatic updater, I am told that the download failed and that I should try again later. My guess is that one of the files was damaged in the download, and that it chokes each time it tries to open it. I suspect that the "fix" is to delete all of the downloaded and temporary files and to start over, but I don't know where they are. Anybody know? Thanks.

The file I downloaded was downloaded with the following filename cf10_mdt_updt.zip. I then ran an extract all and saved the extracted files to a folder called cf10_mdt_updt. I then copied the folder with the extracted files to the following folder c:\ColdFusion10\jre\bin. I then ran Command Prompt as Administrator and got the error message shown below.

Similar Messages

Where does the manditory CF10 update needed to be copied to?

We are running ColdFusion 10,282462 on a Windows Server 2008 R2 (64-bit) server. There are several updates waiting to be downloaded and installed. Before I can install these updates I need to download and install a manditory update. I have downloaded the manditory update, but I am not sure where on our server that I need to copy the files included in the cf10_mdt_updt folder which I downloaded from your website. Where do I copy the downloaded files to on our server?

The file I downloaded was downloaded with the following filename cf10_mdt_updt.zip. I then ran an extract all and saved the extracted files to a folder called cf10_mdt_updt. I then copied the folder with the extracted files to the following folder c:\ColdFusion10\jre\bin. I then ran Command Prompt as Administrator and got the error message shown below.

(SOLVED) where does the xorg server gets the Composite file from?

I'd like to see the list of composite combinations. Seeking on the Internet I understand that the file should be:
/usr/share/X11/locale/en_US.UTF-8/Compose
Where en_US.UTF-8 is my locale, but according to that file:
<Multi_key> <underscore> <o> : "ō" U014D # LATIN SMALL LETTER O WITH MACRON
I should obtain the small letter o with the macro using multi_key underscore and o. Instead I obtain this: º.
Same problem with the
<Multi_key> <c> <o> : "ǒ" U01D2 # LATIN SMALL LETTER O WITH CARON
If I press the keys I obtain: ©, the copyright sign...
So... Where does the arch xorg got its Compose file? Change I change its behavior?
Thanks.
Last edited by ezzetabi (2009-10-10 15:25:02)

I ignored that is was an application side issue, thanks for explanation. And indeed I was using lxterminal: the terminal emulator of lxde that is based on GTK. Using the xim input system everywhere solved the problem.
People! Listen! Put this two lines in your .xinitrc :
. /etc/X11/xinit/xinitrc
export GTK_IM_MODULE=xim
export QT_IM_MODULE=xim
exec whatever you use
Thanks! Cheers!
Last edited by ezzetabi (2009-10-10 15:25:25)

How and where does SAP standard programs update the master tables...

Hello there,
How and where does SAP standard programs update the master tables...
to be precise.. if a (any) transaction occurs the programs behind it holds the data in temporary structures.
where and when does it get updated in the master table.
can anyone tell me how it happens?
I Know that from the where used list one can find the corresponding table but most of the time it wont suffice
I am expecting a proper answer.
Santosh B

Hello Santosh,
you need to do some self-reading on the following topic
Updates in the SAP System (BC-CST-UP)
http://help.sap.com/saphelp_47x200/helpdata/en/e5/de86e135cd11d3acb00000e83539c3/frameset.htm
Regards,
Siddhesh

Where does Bridge CS5 store the metadata files?

Where does Bridge CS5 store the metadata files that are created under the Tools menu? I moved CS5 from one drive to another on my Mac Pro and lost all of them. I'd like to recover them is possible.

Yikes!
genenphoto wrote:
…I moved CS5 from one drive to another on my Mac Pro…
First of all, all Adobe applications really need to be installed and reside permanently on your boot volume, i.e. the same volume where your OS resides. There will be endless grief if you install the applications elsewhere.
Secondly, I hope by "moved" you mean that you deactivated CS5 and then used the Adobe Uninstaller to uninstall CS5, then re-installed CS5 from the original media, from scratch, and not just drag-copied the Application folder. And hopefully there's an OS installation on that other drive that will allow you to boot off that drive.
Third, you need to refer to your preferences in Bridge as you set them to find out whether you were keeping the cache in distributed folders or were using the central database, whether you were using separate xmp sidecar files, whether you had Export Cache to Distributed Folders set in Bridge preferences, etc..
Wo Tai Lao Le
我太老了

Where does the java classes go?

I normally use IntelliJ which automatically puts the java class and the jsp where they are meant to go.
Can some help me.
Can someone please tell me where to put the java class, i have put the jsp pages in the webapps\ROOT but where does the java classes go?
Edited by: Tinkerbelle on Jul 24, 2008 1:46 AM

Tinkerbelle wrote:
sorry being stupid i do that sorry,
If i change the class to type (as someone said in a previous post)That would only work if you already put the bean in the session scope.
Did you try what PaulOckford wrote?
>
i get this error:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP:
An error occurred at line: 6 in the generated java file
Only a type can be imported. com.database.contactDB resolves to a packageDo you have a package structure that looks like this:
com
com/database/ <-- This is where contactDB.class is located
com/database/contactDB/
Because that is what the compiler is saying. Though it may be thrown off by case (see below)
P.S. If you use the jsp:useBean you do not need the import statement which appears to be where the error occurs. (One of the things that makes JSPs so hard to debug is the fact that the error line in the generated java file as referenced above is never the same as the line in the JSP file).
>
An error occurred at line: 3 in the jsp file: /login.jsp
database.contactDB cannot be resolved to a type
1: <%@ page import="com.database.contactDB" %>
2:
3: <jsp:useBean id='db'
4: scope='session'
5: type='database.contactDB'/>
6: <html>
And to be ultra clear - you did compile contactDB from a .java file to a .class file, and the class is called contactDB and not ContactDB correct? The class name is case sensitive and should be the exact same case in the useBean and import statements as in the real class name.
>
An error occurred at line: 3 in the jsp file: /login.jsp
database.contactDB cannot be resolved to a type
1: <%@ page import="com.database.contactDB" %>
2:
3: <jsp:useBean id='db'
4: scope='session'
5: type='database.contactDB'/>
6: <html>
Stacktrace:
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:93)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:330)
     org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:435)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:298)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:277)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:265)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:564)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:302)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:329)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.26 logs.
Apache Tomcat/5.5.26Edited by: stevejluke on Jul 24, 2008 7:33 AM
Fixed compile from .class file to a .java file to compile from a .java file to .class file

After trying to run the iTunes automatic update, I got this "The feature you are trying to use is on a network resource that is unavailable." Click OK to try again,or enter an alternate path to a folder containing the installation package 'itunes.msi"

After trying to run the iTunes automatic update, I got this box on my pc "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi" in the box below.. I ran a search for the file, and entered that into the box, to no avail. Then I launched iTunes and clicked on 'check for updates', and was told I had the latest version 11.0.1 I think it is. So, any clue on what to do? Thanks for any and all help.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Where does DW CS5 store FTP and other data in W7

My computer self destructed the boot sectors of it's system disc. I managed to get a clever chap to rescue all the app data and have managed to get back all my browserss book marks, pass words etc.
My next stap is to try and get back all my presets and FTP data for all my client's web sites in dreamweaver, without all the pain and grief of reloading it all manually.
So - where does Dreamweaver CS5 store all the site data etc on a Windows 7 (64bit) machine?
Many thanks
Ralph
Vision Design UK Limited

The only way to retrieve site definitions is from previously exported .ste files.
To backup, go to Sites > Manage Sites > Export...
To recover, go to Sites > Manage Sites > Import > browse to .ste files on your hard disk, local site folders or removable flash drive.
If you didn't backup your site definition settings to a safe place, I'm afraid you'll need to manually input this info again.
See Migrating snippets, workspace and extensions...
http://cookbooks.adobe.com/post_Migrating_Dreamweaver_configuration__site_settings-17658.h tml
Nancy O.

The latest automatic update was accompanied by "You should update Adobe Flash Player right now". Having done this a few days ago a new Firefox update arrived with the same "request". Why and what do I need to do to stop this?

The latest automatic update (in March) was accompanied by "You should update Adobe Flash Player right now". Having done this a few days ago a new Firefox update arrived (today 7. March) with the same "request". Why does this happen and what can I do to stop it? Firefox 3.6.15 and Adobe flash player 10.1.82.76 are currently installed.

Shockwave Flash 10.1 r82 is not the latest version of Flash. '''r152''' is the latest.

Where does the magnet go for the reed switch? (i found the magnet after . .

My hinges had broken on the display so I replaced the display.
After putting back the unit together I found a magnet ?
The unit was going to sleep with the screen open.
I assume this is for the reed switch, where does the magnet go?
in the computer?
I found reference to the 12" ibook G4 1.2ghz with the reed switch under "end" key and the magnet in the screen. However I found the sensor "reed switch" in my screen in the right upper side.

I found it.
Message was edited by: Patrick Bagdasarian

Where does the control moves at first at END-OF PAGE or END-OF-SELECTION

Is END-OF PAGE triggered like TOP-OF-PAGE from the AT-SELECTON-SCREEN automatically with a write statement & where does the control moves at first
at END-OF PAGE or END-OF-SELECTION?

Hi,
1. End-of-selection:
This event is triggered after the start-of-selection. to display the contents on the report.
2.Top-of-page: Every time a new page is triggered. Mainly this is used for header of the report.
3. End-of-page : every time the list data reaches the footer region of the page.
This way first data is disaplyed then it reaches the footer..
first End-of-selection then End-of-page
These example may help u in detail...
Leaving Event Blocks Using STOP
If you use the STOP statement within an event block, the system stops processing the block immediately. The ABAP runtime environment triggers the next event according to the following diagram:
Before and during selection screen processing, the next event in the prescribed sequence is always called. From the AT SELECTION-SCREEN event onwards, the system always jumps from a STOP statement directly to the END-OF-SELECTION statement. Once the corresponding event block has been processed, the system displays the list.
The following program is connected to the logical database F1S.
REPORT EVENT_TEST.
NODES: SPFLI, SFLIGHT, SBOOK.
START-OF-SELECTION.
WRITE 'Test program for STOP'.
GET SBOOK.
WRITE: 'Bookid', SBOOK-BOOKID.
STOP.
END-OF-SELECTION.
WRITE: / 'End of Selection'.
This produces the following output:
Test Program for STOP
Bookid 00010001
End of Selection
As soon as the first line of SBOOK has been read, the system calls the END-OF-SELECTION event block.
Exiting Event Blocks Using EXIT
If you use the EXIT statement within an event block but not in a loop, the system stops processing the block immediately. The ABAP runtime environment triggers the next event according to the following diagram:
Before and during selection screen processing, the next event in the prescribed sequence is always called. From the START-OF-SELECTION event onwards, the system starts the list processor directly when the EXITstatement occurs, and displays the list.
If the EXIT statement occurs inside a DO, WHILE, or LOOP loop, it is the loop that terminates, not the processing block.
The following executable program is connected to the logical database F1S.
REPORT demo_program_exit_1.
NODES: spfli, sflight, sbook.
START-OF-SELECTION.
WRITE 'Test Program for EXIT'.
GET sbook.
WRITE: 'Bookid', sbook-bookid.
EXIT.
END-OF-SELECTION.
WRITE: / 'End of selection'.
This produces the following output:
Test Program for EXIT
Bookid 00010001
After the first line of SBOOK has been read, the list is displayed immediately.
The following executable program is connected to the logical database F1S.
REPORT demo_program_exit_2.
NODES: spfli, sflight, sbook.
DATA flag(1) TYPE c.
AT SELECTION-SCREEN.
IF carrid-low IS INITIAL.
flag = 'X'.
EXIT.
ENDIF.
START-OF-SELECTION.
IF flag = 'X'.
WRITE / 'No input for CARRID'.
EXIT.
ENDIF.
GET spfli.
GET sflight.
GET sbook.
END-OF-SELECTION.
WRITE / 'End of Selection'.
If the user does not enter a value for CARRID-LOW, the output appears as follows:
No selection made for CARRID
After the first EXIT statement, the next START-OF-SELECTION event is triggered. After the second EXITstatement, the output list is displayed.
Regards.

Where does the ISAPI redirector go?

Where does the ISAPI redirector iisforward.dll go? Does it go on the
specific website or on the general website? The docs, from what I
remembered were a bit ambiguous about that. I put it on the whole thing
(WWWService) cause that's where I needed to put it for an older Apache to
work. But I seem to be at least getting a log file generated when I tried
putting it on one specific website within the WWWService. However, I'm
still not getting any redirects.
Thanks.

The scroll bar is hidden by default. You can re-enable it in System Preferences > General > Select Always show Scroll bar.
See attached image for a visual aid.

Where does the "Internet Plug-in" folder go? What's the path?

Where does the "Internet Plug-in" folder go? What's the path? I moved it by misake and don't know how to put it back where it belongd

The folder should be In Macintosh HD (Or whatever your hard drive is called) >> Library.... just copy the folder into the Library folder.

Hp touchsmart 15 Q: where does the 7th brown wire go inside the laptop?

My friend has an HP Touchsmart 15-R laptop that doesn't want to accept the ac power supply line in jack. With a flashlight and a micro dental hook tool, i poked around inside the potr in and notice that i do not see the traditional circle and center pin configured jack port like ALL other windows 7 laptops iv'e come accross.
After watching a youtube video that shows an identical laptop being taken apart and then put back together,i noticed that this laptops pin out/power plug has a completely different configuration! There are 7 wires going inside the laptop from the port plug.I can identify 6 of them (2white: LED light/ 2 red: dc v+/ 2 black:dc v-) the 7th is a single brown wire, Its situated between the red and black wires on the back side of the female power port plug and as i mentioned, when looking inside the port where the power supply jack connects,the configuration is different (see pictute)Where does the brown 7th wire go?

Hi,
Open Intel Rapid Storage from the Control Panel and it will show it there. The Intel Rapid Storage Control Panel will show the 8GB mSSD under the acceleration tab. The computer actually combines the 8GB mSSD and the main hard drive into a RAID-0 array so it all appears as a single drive.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Z77a-g45 where does the little speaker go and why does my computer pause on c5

so my computer boots does evrything plays games etc but when it starts these numbers in the bottom right corner go off then it stops at c5 for a second then goes to bios screen then boots to windows. is this bad?
also where does the little speaker plug into.

it will be fine its just a hang not an error or failure! its just struggling for a short time to get the hard drive opperating thats all and is nothing to loose any sleep over!
Hang = nothing to worry about really
failure = thats the oposite of a hang its where it never starts and is to actually worry about!
unless your computer never gets past that code and refused to load because its failed its not a issue to really bother about! like Xmad said you could try a BIO's update to the most recent one and do a firmware update if you have an SSD! its just a detection hang and an update of both could fix it!
if you are thinking about doing a bios update use this >>Use the MSI HQ Forum USB flasher<<
do not use live update to do the bio's flash as it has a 50/50 chance of bricking the board and the tool above has never had a failure of a flash!

Where does the CS5 Automatic Update put temporary files?

Similar Messages

Maybe you are looking for