Where does the data get saved from (notepad) or Notes on Windows Mobile 5?
Where does the data get saved from (notepad) or Notes on Windows Mobile 5?
(ON the Phone) Sticky note like program WM5
I ask because I synced my Blackjack 1 to my pc after about a year and MANY notes later, All the notes from the PC remained but ALL new notes on phone (a years worth) were deleted from the phone.
I would like to attempt a data recovery on my mobile device- that was an insane endeavor but i got it to work now i just need to know what to look for (what type of files to recover) and or where to recover from?
I did make the phone a drive already and have data recovery software that can pull deleted files from the phone in fat or raw data format.
Thanks.
Hi,
I think this is not the best forum for your question. This forum is for Microsoft Exchange Server's mobile connectivity issues.
Regards,
Zoltán
http://www.clamagent.org - Free Antivirus for Exchange
http://www.it-pro.hu
http://emaildetektiv.hu
Similar Messages
-
HT1430 where does the backup get saved on the windows computer?
whenever m tryin to backup my phone it starts and after consuming the space on the hard drive of computer it stops after the msg saying bakup could nt b saved on the computer.. so my question is where does the backup get saved on d computer n how to access it n hw to clear the old backup history n free the space on the computer? help plz...
WHERE ARE BACKUPS LOCATED
ITunes stores one active backup and each time a backup is created the old backup is overwritten. Icloud saves the last three backups. You cannot view the backups unless you have special software to read it. If you want to know where the backups are located on your computer then read this article
http://support.apple.com/kb/HT4946 -
Where does the data come from which powers the ship date and delivery date
Hi All,
Please let me know, where does the data come from which powers the ship date and delivery date?.
Adi.Hi,
DELIVERY DATE will be maintain in the SALES DOCUMENT TYPES in VOV8 in the tab REQUESTED DELIVERY DATE/PRICING DAE/PURCHASE ORDER DATE.
The field is PROPOSE DELIVERY DATE .
If you check the field then the document created date will be the Requested date and will be carried from ORDER TO DELIVERY.
If you want the delivery date other thann the CURRENT date then you have to maintain the LEAD TIME in days in the same tab.
SHIP DATE: is the date on which you do the PGI in the delivery .
Please check them and revert back if u need further details
thanks,
santosh -
Where does the information get stored when you sync/back up your i-phone. I have no idea where to look if I need it again!
ThanksYou can chhose the backup when you would reset your device. In this case you would get the option, during the set up process, to choose your backup and restore your device from it.
(You can find a few information e.g. size and date of your backup in "Settings > iCloud > Storage & Backup > Manage Storage") -
Where does the default route come from ?
Dear All
As we know, the edge router in client side gets default route from ISP' edge router. Where does the default route come from in ISP? If the ISP edge router has full route table, it produces there. If not, it comes from its upstream router until full routes table(only BGP). Please correct me if I am wrong. Thank you.Hello.
While establishing BGP with ISP, there are three options for a client:
> Default route (used in general) - client router forwards every request (for destination route) to ISP router.
> Full route - ISP router's complete routing table would be received and maintained in client router.
> Partial route - Only specific route would be received from ISP (Head office - Branch office scenario)
ISP generate default route from their peering router that should have full routing table or knowledge of the router having it. A local ISP may generate default to their client and have one received from their upstream or global / larger ISP. Hope this helps. -
How the data gets replicated from CRM to ISU
Hello All,
How the data gets replicated from CRM to ISU?
Would appreciate documents send to [email protected]
Regards,
RemiHere is the link!
http://help.sap.com/saphelp_crm50/helpdata/en/c8/b0a68afbb3624cbabeb5ea12a8c639/frameset.htm
Cheer,
Daniel
http://sapro.blogspot.com -
My imac running OS 10.6.8, and want to install Garmin software that needs OS10.7.
The latest upgrade Maverick requires a MAC dated 2007 or later. Where is the date... It is NOT in "About this Mac".
I feel an older upgrade than Maverick might be better for my machine?
Is it possible to upgrade to ie, 10,7? or another recommended upgrade.
How to proceed?Upgrading from Snow Leopard to Lion or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99.
If you sign into the App Store and try to purchase Mountain Lion but the App Store says your computer is not compatible then you may still be able to upgrade to Lion per the following information.
A. Upgrading to Mountain Lion or Mavericks
To upgrade to Mountain Lion or Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion or Mavericks (Free) from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion — System Requirements
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
B. Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply. -
Where does downloaded music get saved?
Hello. Downloaded 1 music album from Google Music. I can see it and play it but cannot find it in the file system. Where does downloaded music get stored on the Ellipsis 8? Thanks.
OK, I have read a bit more...in the purchase req release strategy config notes I read the following:
"The system assigns the values fromthe communication structure CEBAN to the characteristics of this class."
But I would still like to know where the data from CEBAN-USRC1 is actually stored....
Thanks for the help
Lynton -
Where does the Attachments gets stored.
Hi All,
We are adding attachments to a Human Task ADF TaskDetails page.
When opening the attachments we are getting an error.
Reason : The HOST_NAME is getting changed to the managed server name while opening the attachment.
Can someone tell me where does these attachments gets stored.Can i query and check which host_name is used while storing it , if it is using the database for it.
Please help me to debug this issue.
Thanks,
Sid.Hi,
Here are the tables you should look at:
fnd_attached_documents
fnd_documents
fnd_documents_tl
fnd_lobs
fnd_documents_short_text
fnd_attached_documents has a column called entity_id which contains the po_header_id or po_line_id depending on where the document is attached.Those tables are already mentioned in the link referenced above --> Where are attachments stored in oracle apps
Regards,
Hussein -
Where does CustomIDocumentPlugin:identifyIncomingDocument get doctype from
When handling positional flat files it looks like doctype is not defaulting from B2B setups for oracle.tip.adapter.b2b.document.custom.CustomIDocumentPlugin:identifyIncomingDocument
oracle.tip.adapter.b2b.document.custom.CustomIDocumentPlugin:identifyIncomingDocument Enter
oracle.tip.adapter.b2b.document.custom.CustomIDocumentPlugin:identifyIncomingDocument non-XML Payload
oracle.tip.adapter.b2b.document.custom.CustomIDocumentPlugin:identifyIncomingDocument iDoc ECS = xyzECS.ecs
oracle.tip.adapter.b2b.document.custom.CustomIDocumentPlugin:identifyIncomingDocument start pos = 71
oracle.tip.adapter.b2b.document.custom.CustomIDocumentPlugin:identifyIncomingDocument end pos = 75
oracle.tip.adapter.b2b.document.custom.CustomIDocumentPlugin:identifyIncomingDocument key = [METH]
oracle.tip.adapter.b2b.document.custom.CustomIDocumentPlugin:identifyIncomingDocument value = [METH]
oracle.tip.adapter.b2b.document.custom.CustomIDocumentPlugin:identifyIncomingDocument target = [METH]
oracle.tip.adapter.b2b.document.custom.CustomIDocumentPlugin:identifyIncomingDocument doctype = xyz, doctype revision = 1.0
oracle.tip.adapter.b2b.document.custom.CustomIDocumentPlugin:identifyIncomingDocument Exit
the doctype that I have defined in B2B is different than what's being identifyed by CustomIDocumentPlugin
message only gets processed if I go and change my doctype name to whats in the log.I understand start and end position, they are matching. but its identifying the doc type as lets say "xyz" and revison 1.0 , where as there is no such setup in Oracle B2B. my question was where is it getting "xyz" and 1.0. it always defaults to doc type as "xyz" and revision 1.0
If I go and change my B2B setups (doc type as "xyz") only then the document gets processed or else it errors saying agreement not found.
This is very strange , is it possible that the doc type is somehow getting derived from ecs and not B2B setups ? -
Where does the data of health service watcher node gets stored in OperationsManagerDB/DW ?
Hi,
We have integrated SCOM 2007 R2 to some third party tool which takes the data of health service as the component from OperationsManagerDB/DW and shows the availability of each server in graphical format. But we have noticed that due to some issues with health
service, the availability gets affected. Hence, we have thought to add the data of health service watcher node as a component in that tool than
health service only. But we are unable to get the exact location of health service watcher in OperationsManagerDB/DW.
Could anyone please help me with the location of health service watcher node data in
OperationsManagerDB/DW.
What is the table name where the data of health service watcher node gets collected in OperationsManagerDB/DW.
Thanks in anticipation.Hi,
A watcher node is an agent that runs monitors and rules that test an application or feature on another computer.
A watcher node can either be the agent with the application or feature installed, or it can be a separate agent. If the watcher node is a separate computer, in addition to ensuring that the application or feature is healthy, the watcher node can validate
that clients can connect to it and test such additional features as security, network availability, and firewalls.
I think according to applications monitored, watcher node is configured differentlly, the below article is talking about lync watcher node, you may want to check it:
http://technet.microsoft.com/en-us/library/jj204943.aspx
Regards,
Yan Li
Regards, Yan Li -
Where does the date come from when using Tip type = dateFormat
Hi,
Can anyone tell me when using personilizations where the date that is shown comes from when using tip type = dateFormat? Today it shows (example: 24-Sep-2012) but yesterday it was the 23rd so seems to increment by one day. Is there a way to change the date shown here, to sysdate for example?
ThanksHi,
You can check Inline Messaging, Tips, Hints and Bubble Text section in OA Framework Developer Guide
Thanks,
Jit -
Why does not the data get saved into the Database
Please check if there is any thing wrong with my code here. Why cant i save the data in to my database. when i used the same things in other places it works.
guys i have copied a portion of the code here. right now i have commented few areas to not give me any errors on the whole program
Please check why cant i save the data into the database.
i have created a seperate class for database connection Utilities
void saveData()
//Utilities ut = new Utilities();
//connection = ut.getConnection();
//ResultSet resultSet;
// JourneyID = ut.getResults(qryJourneyID);
strJourneyID = txtJourneyID.getText();
System.out.println("++++++++++++++++++++++++"+strJourneyID);
strVehicleID = (String)comboVehicleID.getSelectedItem();
System.out.println("++++++++++++++++++++++++"+strVehicleID);
strDriverID = (String)comboDvrID.getSelectedItem();
System.out.println("++++++++++++++++++++++++"+strDriverID);
strStartDateTime = txtDateTime.getText();
System.out.println("++++++++++++++++++++++++"+strStartDateTime);
int a = JOptionPane.showConfirmDialog (null, "Are u sure you want to save the changes?", "WARNING!", JOptionPane.YES_NO_OPTION, JOptionPane.QUESTION_MESSAGE);
if (a == 0)
if(NEW)// new is a boolean value
//ADDING NEW DATA STATMENT
System.out.println("INSERTING NEW ROW IN THE TABLE...");
try
String insert ="INSERT INTO Job VALUES (" + "'" + strJourneyID + "'"+
", '"+ strVehicleID + "',"
+"'"+ strDriverID +"',"
+ "'"+ strStartDateTime +"')";
System.out.println("STATEMENT IS " + insert);
// InsertStmt = connection.createStatement();
// InsertStmt.executeUpdate(insert);
JOptionPane.showMessageDialog(null, "You data has been successfully saved.","TIS: Operation completed", JOptionPane.INFORMATION_MESSAGE);
catch (Exception e)
e.printStackTrace();
JOptionPane.showMessageDialog(null, "Problem encountered while adding new data");
else
JOptionPane.showMessageDialog(null, "it is supposed to save data");
/*try
String ChangeRecord = "UPDATE Job SET " +
"JourneyID = '" + strJourneyID+ "'"+
"VehicleID = '" + strVehicleID+"',"+
"DriverID = '"+strDriverID+"'," +
"StartDateTime='" + strStartDateTime+ "'";//syntax error???
System.out.println(""+ ChangeRecord);
UpdateStmt = connection.createStatement();//just added
UpdateStmt.executeUpdate(ChangeRecord);
JOptionPane.showMessageDialog(null, "You data has been successfully saved.","TIS: Operation completed", JOptionPane.INFORMATION_MESSAGE);
catch (Exception change_exception)
change_exception.printStackTrace();
JOptionPane.showMessageDialog (null, "Problem encountered while updating","TIS: Problem encountered",JOptionPane.ERROR_MESSAGE);
else
JOptionPane.showMessageDialog(null, "You chose to cancel the operation","Operation cancelled", JOptionPane.INFORMATION_MESSAGE);
}Yes you have commented all the code that update the
database so how can it update the database.
By the way for inserting dont use Statement use
PrepairedStatement
by the way next time please post codes in code tagsMan i have commented it becaues it if i dont comment it givens me errors. like cannot find variable and i dont understand how to use the code button. whereever i click the code button it displays the at the end of the code! what to do?
connection = ut.getConnection();
ResultSet resultSet;
UpdateStmt = connection.createStatement();
UpdateStmt = connection.createStatement();
UpdateStmt.executeUpdate(ChangeRecord);
please check it once again
void saveData()
Utilities ut = new Utilities();
connection = ut.getConnection();
ResultSet resultSet;
// JourneyID = ut.getResults(qryJourneyID);
strJourneyID = txtJourneyID.getText();
System.out.println("++++++++++++++++++++++++"+strJourneyID);
strVehicleID = (String)comboVehicleID.getSelectedItem();
System.out.println("++++++++++++++++++++++++"+strVehicleID);
strDriverID = (String)comboDvrID.getSelectedItem();
System.out.println("++++++++++++++++++++++++"+strDriverID);
strStartDateTime = txtDateTime.getText();
System.out.println("++++++++++++++++++++++++"+strStartDateTime);
int a = JOptionPane.showConfirmDialog (null, "Are u sure you want to save the changes?", "WARNING!", JOptionPane.YES_NO_OPTION, JOptionPane.QUESTION_MESSAGE);
if (a == 0)
if(NEW)
//ADDING NEW DATA STATMENT
System.out.println("INSERTING NEW ROW IN THE TABLE...");
try
String insert ="INSERT INTO Job VALUES (" + "'" + strJourneyID + "'"+
", '"+ strVehicleID + "',"
+"'"+ strDriverID +"',"
+ "'"+ strStartDateTime +"')";
System.out.println("STATEMENT IS " + insert);
// InsertStmt = connection.createStatement();
// InsertStmt.executeUpdate(insert);
JOptionPane.showMessageDialog(null, "You data has been successfully saved.","TIS: Operation completed", JOptionPane.INFORMATION_MESSAGE);
catch (Exception e)
e.printStackTrace();
JOptionPane.showMessageDialog(null, "Problem encountered while adding new data");
else
JOptionPane.showMessageDialog(null, "it is supposed to save data");
try
String ChangeRecord = "UPDATE Job SET " +
"JourneyID = '" + strJourneyID+ "'"+
"VehicleID = '" + strVehicleID+"',"+
"DriverID = '"+strDriverID+"'," +
"StartDateTime='" + strStartDateTime+ "'";//syntax error???
System.out.println(""+ ChangeRecord);
UpdateStmt = connection.createStatement();//just added
UpdateStmt.executeUpdate(ChangeRecord);
JOptionPane.showMessageDialog(null, "You data has been successfully saved.","TIS: Operation completed", JOptionPane.INFORMATION_MESSAGE);
catch (Exception change_exception)
change_exception.printStackTrace();
JOptionPane.showMessageDialog (null, "Problem encountered while updating","TIS: Problem encountered",JOptionPane.ERROR_MESSAGE);
else
JOptionPane.showMessageDialog(null, "You chose to cancel the operation","Operation cancelled", JOptionPane.INFORMATION_MESSAGE);
} -
Where does CEBAN-USRC1 get saved?
Hi there,
I hope you can help me I am currently doing a scenario involving ME51N (purchase requisition CREATE). I have been asked by the business analyst to populate field CEBAN-USRC1 with a specifc cost center in user exit EXIT_SAPLEBND_001.
That is fine, I have no problem populating that field CEBAN-USRC1 with the required value BUT where on earth is the value I enter actually get saved? I would maybe think in the account assignment somewhere....mmmm......Table EBAN has no "user fields"....and I have tried to debug but no luck yet. So to save me time I was wondering if any fellow ABAPer out there has ever wondered the same thing....?
I would really appreciate a push in the right direction
Thanks in advane
Regards
LyntonOK, I have read a bit more...in the purchase req release strategy config notes I read the following:
"The system assigns the values fromthe communication structure CEBAN to the characteristics of this class."
But I would still like to know where the data from CEBAN-USRC1 is actually stored....
Thanks for the help
Lynton -
Where does a site get saved?
Hi.
When we save a site on iWeb where does it exactly save them? this is one feature I wished iWeb would include in its Preferences settings so that we could at least find it easily or choose where we would prefer to save the site.
Thanks for your comments.
FarzadFirst thanks to all those who assisted with this question. The reason i was looking to look inside the files was because I was going to add a counter to my page and could not find the html files. And secondly i hope others who are looking for the solution will benefit from my sharing of the information below.
Here is how it works:
Depending on how the site is published - local folder or iDisk, we need to get to that saved location to find all the files that make the site work. in my case i was publishing to iDisk and thought when i execute a File/Save command that iWeb saves to my local drive somewher while I think, and I am not very sure, that it gets saved on iDisk or where the last publishing took place.
So this one of my issue has been solved. On with the cleaning of the gutters around the house now. It is full of leaves. Of course tomorrow when it is sunny again.
Farzad
Maybe you are looking for
-
SRM: Transformation Error
Dear Experts, When activating the Transforamtions DSO--> Datasource. Error Message: Start Routine Syntax Error. I checked the syntax for the start routine Error Msg: In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter "SOURCE_PACKAGE" is
-
Gif imagen dosen't work at o.s 6.0
The gif imagen in profile bbmsn contactas dosen't work in my torch 9800 os 6.0 all my friends that have got the os 6.0 have goy the same proble, i wanna know if there are or when is coming a update to solution this problem
-
Nokia 5610 does not recognize memory card
I have acquired a Nokia 1GB microSD memory card for Nokia 5610 d-1. But the memory card is not recognized. In Nokia 6303 the same memory card is recognized. I have formatted them with this mobile phone. Nevertheless, the 5610 (v10.00) does not recog
-
hi all, i am doing dynamic row addition in datatable and when new row is added focus was gone into the first row of the table but i want to set it into newly added row.. plz help me....its urgent
-
Ok im a newbie so forgive me. I have a imac running osx version 10.75 Bought new in 2009 with dual intel process. The problem i am having is with the superdrive. It will read most cd/dvd's but one of them it will just spit it back out. I original