Where does the installer put AIR 3.6?

I have installed CS6 Flash Pro on my Mac Mountain Lion, and just upgraded the AIR 3.xxx
Apparently it already had 3.5 installed, and upgraded that to 3.6
However, the Adobe Flash directory contains a directory AIR3.2 - not 3.5 and no other. So where is the AIR3.5 and or 3.6 directories that were installed?
Thganks

As far as I know, Adobe Flash CS6 comes with AIR 3.2. Go to Help / Manage AIR SDK to see the paths of installed SDKs or install other versions (using the [+] button).

Similar Messages

Where does the installer extract its files to

When you run the installer for thunderbird it extracts a number of files and puts them somewhere, where does it put them?
The machines I want to install thunderbird to can only run things from certain directories (which excludes the users home directory), as a sys admin I want to be able to install thunderbird, but I cant as it appears to extract files to some directory where we cant run applications from.
Ideally I would like to be able to move the files to somewhere where they can be run (as changing the security policy will take weeks if I am lucky).

I have no idea, but on the start menu type %tmp% in the search or run box and press enter. Windows explorer will open in that folder.

Where does the magnet go for the reed switch? (i found the magnet after . .

My hinges had broken on the display so I replaced the display.
After putting back the unit together I found a magnet ?
The unit was going to sleep with the screen open.
I assume this is for the reed switch, where does the magnet go?
in the computer?
I found reference to the 12" ibook G4 1.2ghz with the reed switch under "end" key and the magnet in the screen. However I found the sensor "reed switch" in my screen in the right upper side.

I found it.
Message was edited by: Patrick Bagdasarian

Where Does Yosemite Installer Hide? (aka missing disk space)

I've been using a 400GB partition on an external drive for Time Machine backups for some time and it's had plenty of room to work with. I upgraded to Yosemite recently and all was well with the Time Machine backups.
Yesterday I downloaded Yosemite again to install it on a second drive so that I would have a second bootable drive. Today I got notice that there was not enough space on my Time Machine backup drive. Suddenly the 400GB was not enough and my primary boot drive had swollen to 480GB. I don't know what it had been, but obviously there is now a lot more on it than there was.
My assumption is that I have the Yosemite Installer and/or hidden installer files that didn't get cleaned up after the second installation. I can't find anything in hidden files or folders that I recognize as such but soemthing is eating up lots of disk space that I need to free.
Where does the App Store stash downloads in case that's it?
If I hold Option on a restart, I no longer have the Installer as an optional boot disk, but I do get three "Recovery-10"... disks. Possibly those are the problem, but I can't locate them either.
Any ideas would be appreciated.

Ok, I may have found a possible solution. I found this at stack exchange. It's not the best option and it requires a simple shell command, and will not be able to be used to restore from Time Machine, but for backing up one or more directory, at least in the short term, this will work. Here it is:
There seems to be an issue with Yosemite renaming the computer local host by adding (#) after the computer name. There are other reports of this happening in a thread on MacRumors Forum and I believe a few people have blamed this as a cause of time machine backup failures. I've tried a few of the suggestions in the thread but so far none have worked. I've stopped using time machine for now and reverted to an old bash rsync script.
A really simple solution is to open the terminal and type:
rsync -avu ~/ /Volumes/backup_disk/backup_folder
replacing 'backup_disk' with the name of your external hard drive and 'backup_folder' with the name of the backup folder i.e.: 'yosemite_backup'. The three flags -avu mean: archive (a) copy the home directory recursively into sub folders, verbose (v) print to the terminal window everything you are copying (feel free to leave this out) and update (u) will only overwrite files that are newer than the archived file (useful after the initial main backup). This solution isn't as hands off as time machine but at least it's a simple way to back up vital information in Documents and Pictures/Videos.
Hope this helps!
to read the full discussion go to http://apple.stackexchange.com/questions/151662/os-x-yosemite-time-machine-ident ity-of-the-backup-disk-has-changed

Where does the ISAPI redirector go?

Where does the ISAPI redirector iisforward.dll go? Does it go on the
specific website or on the general website? The docs, from what I
remembered were a bit ambiguous about that. I put it on the whole thing
(WWWService) cause that's where I needed to put it for an older Apache to
work. But I seem to be at least getting a log file generated when I tried
putting it on one specific website within the WWWService. However, I'm
still not getting any redirects.
Thanks.

The scroll bar is hidden by default. You can re-enable it in System Preferences > General > Select Always show Scroll bar.
See attached image for a visual aid.

Where does the "Internet Plug-in" folder go? What's the path?

Where does the "Internet Plug-in" folder go? What's the path? I moved it by misake and don't know how to put it back where it belongd

The folder should be In Macintosh HD (Or whatever your hard drive is called) >> Library.... just copy the folder into the Library folder.

Where does the java classes go?

I normally use IntelliJ which automatically puts the java class and the jsp where they are meant to go.
Can some help me.
Can someone please tell me where to put the java class, i have put the jsp pages in the webapps\ROOT but where does the java classes go?
Edited by: Tinkerbelle on Jul 24, 2008 1:46 AM

Tinkerbelle wrote:
sorry being stupid i do that sorry,
If i change the class to type (as someone said in a previous post)That would only work if you already put the bean in the session scope.
Did you try what PaulOckford wrote?
>
i get this error:
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: Unable to compile class for JSP:
An error occurred at line: 6 in the generated java file
Only a type can be imported. com.database.contactDB resolves to a packageDo you have a package structure that looks like this:
com
com/database/ <-- This is where contactDB.class is located
com/database/contactDB/
Because that is what the compiler is saying. Though it may be thrown off by case (see below)
P.S. If you use the jsp:useBean you do not need the import statement which appears to be where the error occurs. (One of the things that makes JSPs so hard to debug is the fact that the error line in the generated java file as referenced above is never the same as the line in the JSP file).
>
An error occurred at line: 3 in the jsp file: /login.jsp
database.contactDB cannot be resolved to a type
1: <%@ page import="com.database.contactDB" %>
2:
3: <jsp:useBean id='db'
4: scope='session'
5: type='database.contactDB'/>
6: <html>
And to be ultra clear - you did compile contactDB from a .java file to a .class file, and the class is called contactDB and not ContactDB correct? The class name is case sensitive and should be the exact same case in the useBean and import statements as in the real class name.
>
An error occurred at line: 3 in the jsp file: /login.jsp
database.contactDB cannot be resolved to a type
1: <%@ page import="com.database.contactDB" %>
2:
3: <jsp:useBean id='db'
4: scope='session'
5: type='database.contactDB'/>
6: <html>
Stacktrace:
     org.apache.jasper.compiler.DefaultErrorHandler.javacError(DefaultErrorHandler.java:93)
     org.apache.jasper.compiler.ErrorDispatcher.javacError(ErrorDispatcher.java:330)
     org.apache.jasper.compiler.JDTCompiler.generateClass(JDTCompiler.java:435)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:298)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:277)
     org.apache.jasper.compiler.Compiler.compile(Compiler.java:265)
     org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:564)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:302)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:329)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.26 logs.
Apache Tomcat/5.5.26Edited by: stevejluke on Jul 24, 2008 7:33 AM
Fixed compile from .class file to a .java file to compile from a .java file to .class file

Does the iPad mini/air wifi cellular version carry worldwide 1 year warranty?

Does the iPad mini/air wifi cellular version carry worldwide 1 year warranty?

My point is the iPads wifi+cellular version is worldwide warranty? Why apple states below on web?
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.

Hp touchsmart 15 Q: where does the 7th brown wire go inside the laptop?

My friend has an HP Touchsmart 15-R laptop that doesn't want to accept the ac power supply line in jack. With a flashlight and a micro dental hook tool, i poked around inside the potr in and notice that i do not see the traditional circle and center pin configured jack port like ALL other windows 7 laptops iv'e come accross.
After watching a youtube video that shows an identical laptop being taken apart and then put back together,i noticed that this laptops pin out/power plug has a completely different configuration! There are 7 wires going inside the laptop from the port plug.I can identify 6 of them (2white: LED light/ 2 red: dc v+/ 2 black:dc v-) the 7th is a single brown wire, Its situated between the red and black wires on the back side of the female power port plug and as i mentioned, when looking inside the port where the power supply jack connects,the configuration is different (see pictute)Where does the brown 7th wire go?

Hi,
Open Intel Rapid Storage from the Control Panel and it will show it there. The Intel Rapid Storage Control Panel will show the 8GB mSSD under the acceleration tab. The computer actually combines the 8GB mSSD and the main hard drive into a RAID-0 array so it all appears as a single drive.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

(SOLVED) where does the xorg server gets the Composite file from?

I'd like to see the list of composite combinations. Seeking on the Internet I understand that the file should be:
/usr/share/X11/locale/en_US.UTF-8/Compose
Where en_US.UTF-8 is my locale, but according to that file:
<Multi_key> <underscore> <o> : "ō" U014D # LATIN SMALL LETTER O WITH MACRON
I should obtain the small letter o with the macro using multi_key underscore and o. Instead I obtain this: º.
Same problem with the
<Multi_key> <c> <o> : "ǒ" U01D2 # LATIN SMALL LETTER O WITH CARON
If I press the keys I obtain: ©, the copyright sign...
So... Where does the arch xorg got its Compose file? Change I change its behavior?
Thanks.
Last edited by ezzetabi (2009-10-10 15:25:02)

I ignored that is was an application side issue, thanks for explanation. And indeed I was using lxterminal: the terminal emulator of lxde that is based on GTK. Using the xim input system everywhere solved the problem.
People! Listen! Put this two lines in your .xinitrc :
. /etc/X11/xinit/xinitrc
export GTK_IM_MODULE=xim
export QT_IM_MODULE=xim
exec whatever you use
Thanks! Cheers!
Last edited by ezzetabi (2009-10-10 15:25:25)

Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running google maps app on the phone. Siri cannot seem to get me to a specific address. Where does the problem lie? Thanks.

Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running Google Maps app on the phone. SIRI cannot seem to get me to a specific address. Where does the problem lie? Also can anyone tell me the hierarchy of use between the Apple Maps, SIRI, and Google maps when the app is on the phone? How do you choose one over the other as the default map usage? Or better still how do you suppress SIRI from using the Apple maps app when requesting a "go to"?
I have placed an address location into the CONTACTS list and when I ask SIRI to "take me there" it found a TOTALLY different location in the metro area with the same street name. I have included the address, the quadrant, (NE) and the ZIP code into the CONTACTS list. As it turns out, no amount of canceling the trip or relocating the address in the CONTACTS list line would prevent SIRI from taking me to this bogus location. FINALLY I typed in Northeast for NE in the CONTACTS list (NE being the accepted method of defining the USPS location quadrant) , canceled the current map route and it finally found the correct address. This problem would normally not demand such a response from me to have it fixed but the address is one of a hospital in the center of town and this hospital HAS a branch location in a similar part of town (NOT the original address SIRI was trying to take me to). This screw up could be dangerous if not catastrophic to someone who was looking for a hospital location fast and did not know of these two similar locations. After all the whole POINT of directions is not just whimsical pasttime or convenience. In a pinch people need to rely on this function. OR, are my expectations set too high?
How does the iPhone select between one app or the other (Apple Maps or Gppgle Maps) as it relates to SIRI finding and showing a map route?
Why does SIRI return an address that is NOT the correct address nor is the returned location in the requested ZIP code?
Is there a known bug in the CONTACTS list that demands the USPS quadrant ID be spelled out, as opposed to abreviated, to permit SIRI to do its routing?
Thanks for any clarification on these matters.

siri will only use apple maps, this cannot be changed. you could try google voice in the google app.

Random Vectors/images color inverted in print, but not in PDF. Where does the fault lie?

Sent a PDF to the newspaper printer and some of the images had inverted/strange colors. However...
In one case I had duplicate images of a pink vector flower. SOME of the flowers were inverted, to a dark blue/black, and some were fine(pink). These were embedded vectors.
In other instances vectors, went from orange to blue/black, pink to blue/black, and yellow/white to blue black. I specify because in one vector image, a ring, the ring was yellow, but the diamond was white, and it all changed to the same blue/black in print.
Finally, there were two greyscale Tiff photographs of a pair of ladies. These are not embedded, and have not been altered at all and since the last time this paper has been printed, (which printed fine). This time, they were inverted. Nothing else on the page was inverted.
As far as I can tell, there is not a separation issue, and I have saved the file from InDesign CC to pdf using the same settings as dozens of times before. The pdf on my end looks fine. The printer says they just print what they receive, but as far as I can tell, there is no issue on our end. The fact that some duplicated images printed fine, and others did not seem to confirm this. Everything is properly linked. Has anyone else experienced this problem? Is this a pdf, InDesign, or even an adobe problem at all, or it is something on their end? I have heard of inverted colors before, but can't find a solution (especially as I can't even see the problem on my end.)
Using Windows 8, up-to-date InDesign CC, and Acrobat Pro, Illustrator CS6 ver.16.2.0 64bit
I have no idea what the printer uses.

Where does the fault lie? - in an environment where they (the newsprinter) collect up front, have no responsibility for quality and arrogantly believe, perhaps correctly, that you'll be back with another paying job in the future.
Check the file you sent via Acrobat Preflight or Output Preview for RGB elements.
Check the file you sent via Acrobat Preflight - Checks - For Transparency Used
Do any of these elements off color involve rgb or interact (with or near) any transparency?
(InDesign could show these attributes via the links panel or a Live Preflight. Both can be (probably should be in your case) changed via the PDF Export)

APEX_COLLECTION - where does the code go?

I am trying to create my first APEX collection.
Where does the code go?
Do I create a region as a PL/SQL anonymous block?
Please advise -
Regards,
Stan

Hi,
I think best is create page process where you create/populate collection
Br,Jari

I'm trying to use Dictation. Where does the text go, and how can I retrieve it? Thank you.

I'm trying to use Dictation. Where does the text go, and how can I retrieve it? Thank you.

You dictate after you open a blank page in any text editor. The text goes on the page.
You can use Text Edit for example (in your applications folder).
With the blank page open, go to the Edit menu and select Start Dictation. When you are finished, you save the file as you would any other document. You can retrieve it, edit it or anything else you want, because it is a file like any other you create with that text editor.

When I capture a still frame froma video in Llightroom 4.3, where does the captured frame end up?

When I capture a still frame froma video in Llightroom 4.3, where does the captured frame end up? I cannot find it. Stan

It will be right next to the movie in your library and the jpg file will end up on your hard disk right next to the movie file. You can see the actual file by right (or control) clicking on the image in the library view and selecting "show in Finder/Explorer"

Where does the installer put AIR 3.6?

Similar Messages

Maybe you are looking for