Where does the magnet go for the reed switch? (i found the magnet after . .
My hinges had broken on the display so I replaced the display.
After putting back the unit together I found a magnet ?
The unit was going to sleep with the screen open.
I assume this is for the reed switch, where does the magnet go?
in the computer?
I found reference to the 12" ibook G4 1.2ghz with the reed switch under "end" key and the magnet in the screen. However I found the sensor "reed switch" in my screen in the right upper side.
I found it.
Message was edited by: Patrick Bagdasarian
Similar Messages
-
i just got the macbook air for christmas and i also got the dr dre headphones so i am trying to enable my soundcheck on my iTunes but i cannot figure out how to find where sound check is located can someone please help!!
Go to the iTunes menu > Preferences > Playback.
-
Where is the App icon for HD 1080p Video? From the online photos it should be separate from the camera App.
It's supposed to have a blue background with 1080p in white, while inside there is a white camera with the letters HD in blue.
I cannot find this App icon. Where is it located? It was supposed to be preinstalled.
Thanks.There is no app.
It is the camera. Just take video with the camera.
iPhone User Guide (For iOS 5.1 Software) -
I have a horrible time with my new Iphone-4, No SIM card found issues and while i tried to contact customer care with device serial number getting a messgae of "Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us."
What step should i take next.Where did you get the phone?
That phone was replaced by Apple or an AASP and was not returned to Apple as it should have been, or it was stolen from Apple or somewhere in the supply chain.
You can not get support from Apple for that phone.
Return it to wherever you got it and get your money back. -
I purchased Adobe sc6 master collection from software city and i cannot locate the redemption code, but I do have the serial number for mac, do i still need the redemption code and where would i find it?
Hello,
please have a look there: https://helpx.adobe.com/x-productkb/global/redemption-code-help.html
>>> Redeem your redemption code in three easy steps.
Hans-Günter -
What if I Tunes can't find the album artwork for some of my CDs' within the i-tunes store? There should be a way for it to download the Album Artwork automatically anyway ,shoild'nt there?My friens do it with all there CDs' but they moved.They do it with CDs' that i-tunes do'nt even know exist .I just can't figure it out .Any advice or help out there ?
"If the content doesn't exist in iTunes then you can'd load artwork."
If not in the iTunes Store, iTunes uses the Graceland database for artwork and tag info. -
....or can't be accessed.
Ok so I have trawled the internet and found this to be a known problem, however mine has an extra twist.
Ok, my Mac has a local admin account, lets call it Admin, but the account I use is a network account called PBN.
This network account does not create a home folder path to the server, as such it stores a user folder in Macintosh HD/Users/.
Since buying this mac this has been working fine, no issues, but today when I log onto the machine it gets the error "The home folder for <user> isn't located in the usual place or can't be accessed", whats more is that its created a new folder labelled "~".
Things I have tried:
1) repair permissions and repair disk while booted into SL DVD
2) Right clicking while in System Pref - Users to get to advanced options to check the home drive path (Can't do this because its a network account although the profile is stored locally)
3) xattr -d com.apple.FinderInfo / on problematic machine
Couldn't do this on the PBN account as it has no permissions (although it is a domain admin)
attr file no found error the admin account
4) xattr -d com.apple.FinderInfo /volumes/users/ while booted into another machine with broken machine in target disk mode.
So, I am at a major loss and would really preciate any helpThe error messages regarding network homes really don't offer any specific clues as to what's wrong. The error message you're getting means one of several things - you've done something wrong setting up your server, you've done something wrong setting up your clients, your server has hardware/software issues, or your network infrastructure is bad. I'm honestly not trying to give you a bad time here, just going over possibilities.
DNS, which you mentioned, is a good place to start. You mentioned that forward/reverse lookups work, and that's a good sign. But just to be sure, have you run sudo changeip -checkhostname
If that reports back that the names match and there is nothing to change, then it's pretty certain that DNS is not the issue. Just to be sure, your clients are using your OS X Server, or whatever server is hosting DNS records for your setup?
The next step is to double-check permissions on the shares where user homes are located. The clients should also have accurate date&time settings.
The logs on the clients and server can also offer clues, however cryptic they may be, be sure to look at them if you haven't.
Also, has this setup worked before, if not, can you describe how you set everything up? I've been stymied by OS X Server myself, so I get where you're at, but the more details you provide, the better chance that Tony, Mr. Hoffman, or other folks here can offer a few more clues/suggestions.
hth
Jeff -
DCDIAG /test:dns result is pested here.
C:\Users\administrator.SUD>dcdiag /test:dns
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = MUM-ADS-01
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\MUM-ADS-01
Starting test: Connectivity
......................... MUM-ADS-01 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\MUM-ADS-01
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
......................... MUM-ADS-01 passed test DNS
Running partition tests on : ForestDnsZones
Running partition tests on : DomainDnsZones
Running partition tests on : Schema
Running partition tests on : Configuration
Running partition tests on : sud
Running enterprise tests on : sud.in
Starting test: DNS
Test results for domain controllers:
DC: MUM-ADS-01.sud.in
Domain: sud.in
TEST: Basic (Basc)
Warning: The AAAA record for this DC was not found
TEST: Forwarders/Root hints (Forw)
Error: Root hints list has invalid root hint server:
a.root-servers.net. (198.41.0.4)
Error: Root hints list has invalid root hint server:
b.root-servers.net. (128.9.0.107)
Error: Root hints list has invalid root hint server:
c.root-servers.net. (192.33.4.12)
Error: Root hints list has invalid root hint server:
d.root-servers.net. (128.8.10.90)
Error: Root hints list has invalid root hint server:
e.root-servers.net. (192.203.230.10)
Error: Root hints list has invalid root hint server:
f.root-servers.net. (192.5.5.241)
Error: Root hints list has invalid root hint server:
g.root-servers.net. (192.112.36.4)
Error: Root hints list has invalid root hint server:
h.root-servers.net. (128.63.2.53)
Error: Root hints list has invalid root hint server:
i.root-servers.net. (192.36.148.17)
Error: Root hints list has invalid root hint server:
j.root-servers.net. (192.58.128.30)
Error: Root hints list has invalid root hint server:
k.root-servers.net. (193.0.14.129)
Error: Root hints list has invalid root hint server:
l.root-servers.net. (198.32.64.12)
Error: Root hints list has invalid root hint server:
m.root-servers.net. (202.12.27.33)
TEST: Delegations (Del)
Error: DNS server: sud-ad.sud.in. IP:<Unavailable>
[Missing glue A record]
TEST: Records registration (RReg)
Network Adapter
[00000006] Intel(R) PRO/1000 MT Network Connection:
Warning:
Missing AAAA record at DNS server 10.1.6.132:
MUM-ADS-01.sud.in
Warning:
Missing AAAA record at DNS server 10.1.6.132:
gc._msdcs.sud.in
Warning:
Missing AAAA record at DNS server 10.1.6.133:
MUM-ADS-01.sud.in
Warning:
Missing AAAA record at DNS server 10.1.6.133:
gc._msdcs.sud.in
Warning: Record Registrations not found in some network adapters
Summary of test results for DNS servers used by the above domain
controllers:
DNS server: 128.63.2.53 (h.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 128.63.2.53
DNS server: 128.8.10.90 (d.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 128.8.10.90
DNS server: 128.9.0.107 (b.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 128.9.0.107
DNS server: 192.112.36.4 (g.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.112.36.4
DNS server: 192.203.230.10 (e.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.203.230.10
DNS server: 192.33.4.12 (c.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.33.4.12
DNS server: 192.36.148.17 (i.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.36.148.17
DNS server: 192.5.5.241 (f.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.5.5.241
DNS server: 192.58.128.30 (j.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 192.58.128.30
DNS server: 193.0.14.129 (k.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 193.0.14.129
DNS server: 198.32.64.12 (l.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 198.32.64.12
DNS server: 198.41.0.4 (a.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 198.41.0.4
DNS server: 202.12.27.33 (m.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.127.in-addr.arpa. failed on the DN
S server 202.12.27.33
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: sud.in
MUM-ADS-01 PASS WARN FAIL FAIL PASS WARN n/a
......................... sud.in failed test DNSHi Meinolf,
Please find the IP Details as well as DNS test results.
C:\Users\Administrator.SCI>dcdiag /test:dns
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = MDCDCDNS
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: MDC-Powai\MDCDCDNS
Starting test: Connectivity
......................... MDCDCDNS passed test Connectivity
Doing primary tests
Testing server: MDC-Powai\MDCDCDNS
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
ERROR: NO DNS servers for IPV6 stack was found
......................... MDCDCDNS passed test DNS
Running partition tests on : ForestDnsZones
Running partition tests on : DomainDnsZones
Running partition tests on : Schema
Running partition tests on : Configuration
Running partition tests on : sci
Running enterprise tests on : sci.com
Starting test: DNS
Test results for domain controllers:
DC: MDCDCDNS.sci.com
Domain: sci.com
TEST: Basic (Basc)
Warning: The AAAA record for this DC was not found
TEST: Records registration (RReg)
Network Adapter
[00000009] Microsoft Virtual Network Switch Adapter:
Warning:
Missing AAAA record at DNS server 10.64.7.32:
MDCDCDNS.sci.com
Warning:
Missing AAAA record at DNS server 10.64.7.32:
gc._msdcs.sci.com
Warning:
Missing AAAA record at DNS server 10.64.7.35:
MDCDCDNS.sci.com
Warning:
Missing AAAA record at DNS server 10.64.7.35:
gc._msdcs.sci.com
Warning:
Missing AAAA record at DNS server 10.20.33.72:
MDCDCDNS.sci.com
Warning:
Missing AAAA record at DNS server 10.20.33.72:
gc._msdcs.sci.com
Warning:
Missing AAAA record at DNS server 10.20.33.71:
MDCDCDNS.sci.com
Warning:
Missing AAAA record at DNS server 10.20.33.71:
gc._msdcs.sci.com
Warning: Record Registrations not found in some network adapters
MDCDCDNS PASS WARN PASS PASS PASS WARN n/a
......................... sci.com passed test DNS
C:\Users\Administrator.SCI>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : MDCDCDNS
Primary Dns Suffix . . . . . . . : sci.com
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : sci.com
Ethernet adapter Local Area Connection 7:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : External Internal Virtual Network
Physical Address. . . . . . . . . : 00-14-4F-CA-83-AC
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 10.64.7.32(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.64.7.1
DNS Servers . . . . . . . . . . . : 10.64.7.32
10.64.7.35
10.20.33.72
10.20.33.71
NetBIOS over Tcpip. . . . . . . . : Disabled
Ethernet adapter Local Area Connection 6:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : TEAM : Team #1
Physical Address. . . . . . . . . : 00-14-4F-CA-83-AC
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Autoconfiguration IPv4 Address. . : 169.254.105.163(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 8:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.{2D5A4A27-298F-48E5-A376-EA886EF1E
42A}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 9:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : isatap.{14FA7CD4-8B69-4C86-A58B-056793B7D
901}
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Please check and revert back for any queries..
Thanks...
Deva Self-trust is the first secret of success. -
I am new to Muse so I am following the tutorial for Katie's Cafe. I downloaded the sample files. The problem is not all the files are in the folder as are on the tutorial. The colour sample for instance is not there. The CC Getting Started Katies.mulib file is also not there so you cannot automatically download all the necessary library files. Can anyone help?
found it in another area
Where do I find the cc getting started Katies.mulib File ? -
Hi, Need help. I am trying to download the latest iTunes for Windows application but on running the program it says that it can not be completed as it can not find the folder location of the file "iTunes.msi" . Any clues would be appreciated
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
REP-1352: The fonts specified for this report cannot be found for the char
We have migrated all our character reports to oracle 10g - sun solaris machines.
Now, these reports give us an error....
REP-1352: The fonts specified for this report cannot be found for the character set specified by NLS_LANG
Does anyone have suggestions.
desformat - DELIMITED
mode - character
ThanksHi,
Did you check this DocId:203781.1. I think it will help you problem.
Moreover does your X-server or vnc server on HP work fine.
In the past with HP version 11.0 there was always problem with HP x-server. just check that your x-server is runinig will ex. x-clock.
Cheers,
Hamdy -
AD DS Config problem (The AAAA record for this DC was not found) Cannot connect to ADUC
I am trying to figure out what is wrong with my AD DS Config. I ran dcdiag. The results were:
C:\Users\Administrator>dcdiag /test:dns
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = R210_1_2K12
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\R210_1_2K12
Starting test: Connectivity
......................... R210_1_2K12 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\R210_1_2K12
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
......................... R210_1_2K12 passed test DNS
Running partition tests on : Schema
Running partition tests on : Configuration
Running partition tests on : bcas-tbf
Running enterprise tests on : bcas-tbf.local
Starting test: DNS
Test results for domain controllers:
DC: R210_1_2K12.bcas-tbf.local
Domain: bcas-tbf.local
TEST: Basic (Basc)
Warning: The AAAA record for this DC was not found
TEST: Records registration (RReg)
Network Adapter [00000017] Hyper-V Virtual Ethernet Adapter:
Warning:
Missing AAAA record at DNS server 172.16.0.202:
R210_1_2K12.bcas-tbf.local
Warning:
Missing AAAA record at DNS server 172.16.0.202:
gc._msdcs.bcas-tbf.local
Warning:
Missing AAAA record at DNS server ::1:
R210_1_2K12.bcas-tbf.local
Warning:
Missing AAAA record at DNS server ::1:
gc._msdcs.bcas-tbf.local
Warning: Record Registrations not found in some network adapters
R210_1_2K12 PASS WARN PASS PASS PASS WARN n/a
......................... bcas-tbf.local passed test DNS
IPCONFIG info:
C:\Users\Administrator>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : R210_1_2K12
Primary Dns Suffix . . . . . . . : bcas-tbf.local
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : bcas-tbf.local
Ethernet adapter vEthernet (Broadcom BCM5716C NetXtreme II GigE (NDIS VBD Client
) #36 - Virtual Switch):
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #2
Physical Address. . . . . . . . . : 00-26-B9-7E-81-74
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::bda9:1a28:974a:5fc3%19(Preferred)
IPv4 Address. . . . . . . . . . . : 172.16.0.202(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 172.16.0.1
DHCPv6 IAID . . . . . . . . . . . : 335554233
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1A-0A-52-45-00-26-B9-7E-81-75
DNS Servers . . . . . . . . . . . : ::1
172.16.0.202
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{AE70C63E-0A8A-4461-A789-8E4CD99CEA46}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:9d38:90d7:1cf5:1d4f:53ef:ff35(Pref
erred)
Link-local IPv6 Address . . . . . : fe80::1cf5:1d4f:53ef:ff35%15(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled
I'm unsure of what the problem is or what to do next. Thank You.Disable IPv6 according to Pauls blog:
Disabling
IPv6 on Windows 2008
After disabling run:
ipconfig /flushdns
ipconfig /registerdns
restart the netlogon service or reboot.
For co-existence from IPv4 and IPv6 see:
Configuring DNS for IPv6/IPv4
Coexistence
IPv6
for the Windows Administrator: How Name Resolution Works in a Dual IPv4/IPv6 Scenario
IPv6 for the Windows Administrator: IPv6 Fundamentals
Hopefully, that fixes your issue. Added some links to read in cause you want to.
If it answered your question, remember to “Mark as Answer”.
If you found this post helpful, please “Vote as Helpful”.
Postings are provided “AS IS” with no warranties, and confers no rights.
Active Directory: Ultimate Reading Collection -
The "week" display for Calendar is screwed up. The whole week of days will not display.
Sounds like a different problem but:
Since these threads aren't merged, I'm posting the same in several threads.
I've had the screen blank problem, the sound and copmputer were still on. I took the IMac in twice, got home, still not fixed.
But they used their own keyboard in the shop and couldn't reproduce the problem. I switched keyboards and so far so good. It's been 3 days now.
I'll keep folks updated. Don't get a new graphics card before you try a new keyboard.
Be sure to take the batteries out of your keyboard when testing another one as the board does not turn off if it is like mine. -
How to Use the same iview for both KM End User and the KM Administrator
Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan. -
If I choose "restore from iTunes backup" to move everything from old iphone to a new one, will I still be able to use the old phone for music and apps? Can the old phone be docked up to that same computer every now and then? Or will the new and old phone overwrite each other in some way? In other words, are the two phones treated as different devices when the "restore" option is used to set up the new phone? Thanks in advance.
Yes, you can use the old iPhone as an iPod touch.
Read this:
http://support.apple.com/kb/HT3406 -
My photos always seem to look darker in photoshop elements than when I view them in windows photo viewer - and now I have purchased the annual contract for photography cloud they look exactly the same in PS CC6 as they do in photo viewer - but I still use PS Elements 12 for some tasks and they still appear slightly darker in there - any ideas? - Regards Robert
My photos always seem to look darker in photoshop elements than when I view them in windows photo viewer - and now I have purchased the annual contract for photography cloud they look exactly the same in PS CC6 as they do in photo viewer - but I still use PS Elements 12 for some tasks and they still appear slightly darker in there - any ideas? - Regards Robert
Maybe you are looking for
-
I have been trying for days to help a friend with a new iMac to turn on the icon size slider bar that on my iMac appears at the bottom of ever folder when it is open when in the "view" > "icon" mode. I cannot find anything that discusses this slider
-
How to check if a function module has been called dynamically in programs
Hi, I wanted to know if there is a way to check if a function module has been called dynamically in any programs. In SE37, if you click on where used list for a FM, it shows FM not found in programs (Possibly dynamic calls). I am checking if the func
-
Tell a friend MobileMe gallery not working in Aperture 3
I am trying to share my gallery photos - tell a friend is not working this week - it has worked fine for the past 3 years - what's up?
-
Missing images when printing (in Word)
I am wrapping up a very long report for a client, and have inserted a number of color images (JPG). I cannot for the life of me get them to print. They show up just fine in the print preview, but nothing actually shows up on the paper when I actually
-
How to create table with 1 row 1MB in size?
Hello, I am doing some R&D and want to create a Table with 1 row, which is 1 MB in size. i.e. I want to create a row which is 1 MB in size. I am using a 11g DB. I do this in SQL*Plus: (1.) CREATE TABLE onembrow (pk NUMBER PRIMARY KEY, onembcolumn CL