Where does the Purpose field in IT9 gets updated in Employee vendor master.

Hi All,
I have maintained the purpose field with a value in IT9 for an employee.
I have run PRAA program to update the bank details for the employee in employee vendor master.
Can you please let me know where will the purpsoe field in IT 9 gets updated in employee vendor master.
Regards
Vish

Hi Micheal,
Initally Purpose Field is hidden in screen module pool. we have enabled it . so it is available in IT9.
Regards
Vish

Similar Messages

  • Where does the approver list  fro sc get populated????

    Hello everyone,
      It will be really helpful , if some one can guide me.  i am using a copied (custom)version of ws10000031 for shopping cart approvals. the standard workflow is for two level approval. there is some problem with this custom workflow now. it is not identifying the rite agents . where should i look for to find out where the approver list is getting populated. I am unable to pinpoint a place where the agents are being identified. moreover for two level approvals, i cannot see the second approver name inthe cart status.
    also even after switching on the event trace , i cannot see any event getting triggered inthe trace but i c workitems generated.is this common??
    help would be appreciated.
    thank you

    hi Disha,
    Thanks for ur reply, but i had already done those steps .as i said i am using a copied version of the wf so i have assigned it to an expression &agent_0001.agent& and &agent_0002.agent&. that is what is there in the standard workflow too. my problem is i want to know where this container element is getting populated, since i am going to modify this workflow, i need to know this information. i have tried many different approaches but still cannot find it. it will be great if u can tell me whether this happens in any BADi or it happens inthe bsp code or where ???
    or is it the adhoc agent assignment where this agent assignmetn is taking place?
    because i can see the approval list inthe approval preview inthe cart status screen. i am wondering where and when this apporoval list is being generated???
    thanks once again for the reply.

  • Z fields don't get updated in delivery enhancement

    Hi,
    I have a requirement to create some Z fields into VL02N and VL03N in a new custom tab.
    The tab was created, the 3 new fields are being shown (it's created a new subscreen 9000) and its corresponding fields were created in LIKP.
    However, when the Delivery is saved, the information from the new fields are not being updated in the database.
    I've implemented method IF_EX_LE_SHP_DELIVERY_PROC-SAVE_DOCUMENT_PREPARE from BAdI LE_SHP_DELIVERY_PROC to perform some data manipulation before saving.
    CT_XLIKP gets updated accordingly when we change a standard field. But the Z fields doesn't get updated on that.
    Anyway, I know I should populate the structure CT_XLIKP in order to save into LIKP, but how should I do to retrieve the data from the fields in order to do that?
    Tks.

    Yeah, I think it became a bit strange.
    I needed to create the 3 fields only for display information (even in VL02N) because we have interfaces with legacy systems that creates deliveries through remote BAPI call. So, during the bapi call (BAPI_OUTB_DELIVERY_CREATE_SLS), the EXTENSION_IN is being used and through the bapi documentation, we've to create couple of FM's to upload data to a global access area (BAPI exit) and then download it within the delivery BAdI (method SAVE_DOCUMENT_PREPARE).
    This way, I take the information from global data (which came from EXTENSION_IN) and put it direct to CT_XLIKP).
    Now the question is, I have to open the zfields for edition in VL02N, it was done, but I don't know where or how to take the field's content to put in the CT_XLIKP structure.
    If you could provide me with some example of how to use the get/set to retrieve the information from the field, would be very helpful. Thank you !
    Edited by: rvsilvax on Oct 25, 2011 8:08 PM

  • Where does the Value of EECST gets stored

    Hi,
    Where does the value of EECST gets stored for the infotype p0167. How can it be retrieved from that specific infotype. - Urgent issue.
    Thanks........
    sk

    hi,
    what is EECST?
    there is no such field in data dictionary.
    plz specify properly or atleast u give the name of field in general that is used in pa0167 infotype so that we can help u.

  • Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running google maps app on the phone. Siri cannot seem to get me to a specific address. Where does the problem lie? Thanks.

    Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running Google Maps app on the phone. SIRI cannot seem to get me to a specific address. Where does the problem lie? Also can anyone tell me the hierarchy of use between the Apple Maps, SIRI, and Google maps when the app is on the phone? How do you choose one over the other as the default map usage? Or better still how do you suppress SIRI from using the Apple maps app when requesting a "go to"?
    I have placed an address location into the CONTACTS list and when I ask SIRI to "take me there" it found a TOTALLY different location in the metro area with the same street name. I have included the address, the quadrant, (NE) and the ZIP code into the CONTACTS list. As it turns out, no amount of canceling the trip or relocating the address in the CONTACTS list line would prevent SIRI from taking me to this bogus location. FINALLY I typed in Northeast for NE in the CONTACTS list (NE being the accepted method of defining the USPS location quadrant) , canceled the current map route and it finally found the correct address. This problem would normally not demand such a response from me to have it fixed but the address is one of a hospital in the center of town and this hospital HAS a branch location in a similar part of town (NOT the original address SIRI was trying to take me to). This screw up could be dangerous if not catastrophic to someone who was looking for a hospital location fast and did not know of these two similar locations. After all the whole POINT of directions is not just whimsical pasttime or convenience. In a pinch people need to rely on this function. OR, are my expectations set too high? 
    How does the iPhone select between one app or the other (Apple Maps or Gppgle Maps) as it relates to SIRI finding and showing a map route?  
    Why does SIRI return an address that is NOT the correct address nor is the returned location in the requested ZIP code?
    Is there a known bug in the CONTACTS list that demands the USPS quadrant ID be spelled out, as opposed to abreviated, to permit SIRI to do its routing?
    Thanks for any clarification on these matters.

    siri will only use apple maps, this cannot be changed. you could try google voice in the google app.

  • HT5262 where does the information get stored when you back up your i-phone? It just reports its done but I have no idea where to find it if I need it again!

    Where does the information get stored when you sync/back up your i-phone. I have no idea where to look if I need it again!
    Thanks

    You can chhose the backup when you would reset your device. In this case you would get the option, during the set up process, to choose your backup and restore your device from it.
    (You can find a few information e.g. size and date of your backup in "Settings > iCloud > Storage & Backup > Manage Storage")

  • Where does the details of the files on usr/sap directories get saved?

    hi,
    when a (.dat) file is created by background job processing in the 'usr/sap/' directories, where does the details like last changed, last modified of these files get saved?
    which table does these detiails get saved?
    thanks,
    swamy

    Hi,
    Transaction AL11 does exactly wat you are looking for,
    it lost list of files present on the server SORTED on date and time.
    and also u can use function module EPS2_GET_DIRECTORY_LISTING which contains a date/time stamp
    Hope it helps u...

  • Where does the data get saved from (notepad) or Notes on Windows Mobile 5?

    Where does the data get saved from (notepad) or Notes on Windows Mobile 5?
    (ON the Phone)  Sticky note like program WM5
    I ask because I synced my Blackjack 1 to my pc after about a year and MANY notes later, All the notes from the PC remained but ALL new notes on phone (a years worth) were deleted from the phone.
    I would like to attempt a data recovery on my mobile device- that was an insane endeavor but i got it to work now i just need to know what to look for (what type of files to recover) and or where to recover from?
    I did make the phone a drive already and have data recovery software that can pull deleted files from the phone in fat or raw data format.
    Thanks.

    Hi,
    I think this is not the best forum for your question. This forum is for Microsoft Exchange Server's mobile connectivity issues.
    Regards,
    Zoltán
    http://www.clamagent.org - Free Antivirus for Exchange
    http://www.it-pro.hu
    http://emaildetektiv.hu

  • Where does the ACS server get the DNS info for IP pools?

    I am trying to change the DNS servers that my VPN users are assigned from the IP pools on the ACS server. Where does the IP pools get the DNS server information. I have changed the DNS Ips on the windows server and rebooted. But the VPN clients are still being assigned the old DNS servers.

    ACS ip pools do not push DNS server information
    It is either being forwarded from VPN concentrator group setup or
    it is being send from ACS user/group setup > Radius(VPN 3000) attributes > [026/3076/005] Primary-DNS.
    Hope this helps.
    Regards
    Rohit

  • HT1430 where does the backup get saved on the windows computer?

    whenever m tryin to backup my phone it starts and after consuming the space on the hard drive of computer it stops after the msg saying bakup could nt b saved on the computer.. so my question is where does the backup get saved on d computer  n how to access it n hw to clear the old backup history n free the space on the computer? help plz...

    WHERE ARE BACKUPS LOCATED
    ITunes stores one active backup and each time a backup is created the old backup is overwritten.  Icloud saves the last three backups.  You cannot view the backups unless you have special software to read it.  If you want to know where the backups are located on your computer then read this article
    http://support.apple.com/kb/HT4946

  • Where does the converted document get saved to?

    After the PDF doc is converted to word and I hit save, where does the saved/converted document end up?

    Wherever your browser is configured to save files to by default or the location you select.
    I would suggest searching for the file name (without extension) through Windows Search or Spotlight.
    If you're having difficulty saving the files at all, I'd suggest trying the troubleshooting steps outlined here: http://forums.adobe.com/docs/DOC-1831
    Let us know how it goes!
    -David

  • (SOLVED) where does the xorg server gets the Composite file from?

    I'd like to see the list of composite combinations. Seeking on the Internet I understand that the file should be:
    /usr/share/X11/locale/en_US.UTF-8/Compose
    Where en_US.UTF-8 is my locale, but according to that file:
    <Multi_key> <underscore> <o>         : "ō"   U014D # LATIN SMALL LETTER O WITH MACRON
    I should obtain the small letter o with the macro using multi_key underscore and o. Instead I obtain this: º.
    Same problem with the
    <Multi_key> <c> <o>                  : "ǒ"   U01D2 # LATIN SMALL LETTER O WITH CARON
    If I press the keys I obtain: ©, the copyright sign...
    So... Where does the arch xorg got its Compose file? Change I change its behavior?
    Thanks.
    Last edited by ezzetabi (2009-10-10 15:25:02)

    I ignored that is was an application side issue, thanks for explanation. And indeed I was using lxterminal: the terminal emulator of lxde that is based on GTK. Using the xim input system everywhere solved the problem.
    People! Listen! Put this two lines in your .xinitrc :
    . /etc/X11/xinit/xinitrc
    export GTK_IM_MODULE=xim
    export QT_IM_MODULE=xim
    exec whatever you use
    Thanks! Cheers!
    Last edited by ezzetabi (2009-10-10 15:25:25)

  • P6N Diamond, SLI question: where does the 2nd card go?

    As per title, I have a P6N Diamond motherboard with 4 video card slots (four PCI-e x16), two yellow + two white. I have a single GPU/card in the first slot as usual, but I got a 2nd GPU/card today. Where does it go so I could get 16x16 SLI? Manual is unclear.
    2nd white slot (third PCI-e x16) or the yellow (second PCI-e x16) ?
    I ask because this motherboard has non-standard color coding. Even the RAM slots are not color coded (channel-wise). Instead of A-B-A-B color arrangement on the RAM slots as every other motherboard out there, this motherboard has A-A-B-B arrangement.

    Update: First of all, the case connectors on the motherboard are in the way for SLI purposes. They are too tall and block the insertion of the second card. On my old ASUS moterboard the case pins were on the bottom of the PCB, out of the way, but on this MSI motherboard they are on the side, lined up with the PCI-e x16 slot. Really dumb design! It might be fine for short video cards like 9600GT or similar, but for extended length dual slot video cards like GTX260 (which what I'm using) they are in the way, so much that the second card can't be inserted into the slot at all.
    I spent two hours modding the connectors. I had to snap and break the plastic plugs, remove the metal pins and mod them so they are only 3mm tall, instead of 9mm. I know this motherboard is old so MSI couldn't plan for GTX260/280 and other long cards, but cards like 7950GX2 and similar did exist and predate this motherboard so there is no excuse for MSI for placing the connectors in that position.
    Anyways, warning for any P6N Diamond owners: if you have extended length or longer dual slot video cards like GTX 260, GTX 280, and 4870x2 you will have problems with clearance and would need to do some severe modding or get a different motherboard.

  • When I transfer photos from my camera to my computer, where does the computer store them?

    When I transfer photos from my camera to my computer, where does the computer store them?

    Assuming you're using iPhoto 09 or later.
    By default the photos are stored in the iPhoto Library in your Pictures Folder.
    The iPhoto Library is a Package File. This is simply a folder that looks like a file in the Finder. This is a simple protection from users inadvertently corrupting their library by browsing through it with other software or making changes in it themselves.
    Want to look inside?  Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Standard Warning: Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things,, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
    As an FYI: There are many, many ways to access your files in iPhoto:   You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
    (Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
    You can access the Library from the New Message Window in Mail:
    There's a similar option in Outlook and many, many other apps.  If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    If you want to access the files with iPhoto not running:
    For users of 10.6 and later:  You can download a free Services component from MacOSXAutomation  which will give you access to the iPhoto Library from your Services Menu.
    Using the Services Preference Pane you can even create a keyboard shortcut for it.
    For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    Show File:  a. On iPhoto 09 and earlier:  Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.    3.b.
    b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

  • Where does the EPA will be stored....?

    Hi
    Where does the Transported is going to store? I mean in which location/dir it is going to store?
    Its urgent, suggest me
    Thanks

    Hi Ganesh,
    You can also configure the ExportRootDirectory as described <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/61/1834414b75de2be10000000a1550b0/content.htm">here</a>.
    By default the export will be saved on the portal server under ...\usr\sap\<System ID>\SYS\global\pcd\Export
    but you get also a link to download the file on your client.
    Hope it helps,
    Robert
    PS: If your question has been answered you can make use of the blue star Thanks!

Maybe you are looking for